![Uwe Kleine-König](/assets/img/avatar_default.png)
It is surprising for a PWM consumer when the variable holding the requested state is modified by pwm_apply_state(). Consider for example a driver doing: #define PERIOD 5000000 #define DUTY_LITTLE 10 ... struct pwm_state state = { .period = PERIOD, .duty_cycle = DUTY_LITTLE, .polarity = PWM_POLARITY_NORMAL, .enabled = true, }; pwm_apply_state(mypwm, &state); ... state.duty_cycle = PERIOD / 2; pwm_apply_state(mypwm, &state); For sure the second call to pwm_apply_state() should still have state.period = PERIOD and not something the hardware driver chose for a reason that doesn't necessarily apply to the second call. So declare the state argument as a pointer to a const type and adapt all drivers' .apply callbacks. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
278 lines
7.5 KiB
C
278 lines
7.5 KiB
C
/*
|
|
* Copyright (C) 2016 Broadcom
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#define IPROC_PWM_CTRL_OFFSET 0x00
|
|
#define IPROC_PWM_CTRL_TYPE_SHIFT(ch) (15 + (ch))
|
|
#define IPROC_PWM_CTRL_POLARITY_SHIFT(ch) (8 + (ch))
|
|
#define IPROC_PWM_CTRL_EN_SHIFT(ch) (ch)
|
|
|
|
#define IPROC_PWM_PERIOD_OFFSET(ch) (0x04 + ((ch) << 3))
|
|
#define IPROC_PWM_PERIOD_MIN 0x02
|
|
#define IPROC_PWM_PERIOD_MAX 0xffff
|
|
|
|
#define IPROC_PWM_DUTY_CYCLE_OFFSET(ch) (0x08 + ((ch) << 3))
|
|
#define IPROC_PWM_DUTY_CYCLE_MIN 0x00
|
|
#define IPROC_PWM_DUTY_CYCLE_MAX 0xffff
|
|
|
|
#define IPROC_PWM_PRESCALE_OFFSET 0x24
|
|
#define IPROC_PWM_PRESCALE_BITS 0x06
|
|
#define IPROC_PWM_PRESCALE_SHIFT(ch) ((3 - (ch)) * \
|
|
IPROC_PWM_PRESCALE_BITS)
|
|
#define IPROC_PWM_PRESCALE_MASK(ch) (IPROC_PWM_PRESCALE_MAX << \
|
|
IPROC_PWM_PRESCALE_SHIFT(ch))
|
|
#define IPROC_PWM_PRESCALE_MIN 0x00
|
|
#define IPROC_PWM_PRESCALE_MAX 0x3f
|
|
|
|
struct iproc_pwmc {
|
|
struct pwm_chip chip;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static inline struct iproc_pwmc *to_iproc_pwmc(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct iproc_pwmc, chip);
|
|
}
|
|
|
|
static void iproc_pwmc_enable(struct iproc_pwmc *ip, unsigned int channel)
|
|
{
|
|
u32 value;
|
|
|
|
value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
value |= 1 << IPROC_PWM_CTRL_EN_SHIFT(channel);
|
|
writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
/* must be a 400 ns delay between clearing and setting enable bit */
|
|
ndelay(400);
|
|
}
|
|
|
|
static void iproc_pwmc_disable(struct iproc_pwmc *ip, unsigned int channel)
|
|
{
|
|
u32 value;
|
|
|
|
value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
value &= ~(1 << IPROC_PWM_CTRL_EN_SHIFT(channel));
|
|
writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
/* must be a 400 ns delay between clearing and setting enable bit */
|
|
ndelay(400);
|
|
}
|
|
|
|
static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct iproc_pwmc *ip = to_iproc_pwmc(chip);
|
|
u64 tmp, multi, rate;
|
|
u32 value, prescale;
|
|
|
|
rate = clk_get_rate(ip->clk);
|
|
|
|
value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm)))
|
|
state->enabled = true;
|
|
else
|
|
state->enabled = false;
|
|
|
|
if (value & BIT(IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm)))
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
else
|
|
state->polarity = PWM_POLARITY_INVERSED;
|
|
|
|
value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
|
|
prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
|
|
prescale &= IPROC_PWM_PRESCALE_MAX;
|
|
|
|
multi = NSEC_PER_SEC * (prescale + 1);
|
|
|
|
value = readl(ip->base + IPROC_PWM_PERIOD_OFFSET(pwm->hwpwm));
|
|
tmp = (value & IPROC_PWM_PERIOD_MAX) * multi;
|
|
state->period = div64_u64(tmp, rate);
|
|
|
|
value = readl(ip->base + IPROC_PWM_DUTY_CYCLE_OFFSET(pwm->hwpwm));
|
|
tmp = (value & IPROC_PWM_PERIOD_MAX) * multi;
|
|
state->duty_cycle = div64_u64(tmp, rate);
|
|
}
|
|
|
|
static int iproc_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
unsigned long prescale = IPROC_PWM_PRESCALE_MIN;
|
|
struct iproc_pwmc *ip = to_iproc_pwmc(chip);
|
|
u32 value, period, duty;
|
|
u64 rate;
|
|
|
|
rate = clk_get_rate(ip->clk);
|
|
|
|
/*
|
|
* Find period count, duty count and prescale to suit duty_cycle and
|
|
* period. This is done according to formulas described below:
|
|
*
|
|
* period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
|
|
* duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
|
|
*
|
|
* PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
|
|
* DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
|
|
*/
|
|
while (1) {
|
|
u64 value, div;
|
|
|
|
div = NSEC_PER_SEC * (prescale + 1);
|
|
value = rate * state->period;
|
|
period = div64_u64(value, div);
|
|
value = rate * state->duty_cycle;
|
|
duty = div64_u64(value, div);
|
|
|
|
if (period < IPROC_PWM_PERIOD_MIN ||
|
|
duty < IPROC_PWM_DUTY_CYCLE_MIN)
|
|
return -EINVAL;
|
|
|
|
if (period <= IPROC_PWM_PERIOD_MAX &&
|
|
duty <= IPROC_PWM_DUTY_CYCLE_MAX)
|
|
break;
|
|
|
|
/* Otherwise, increase prescale and recalculate counts */
|
|
if (++prescale > IPROC_PWM_PRESCALE_MAX)
|
|
return -EINVAL;
|
|
}
|
|
|
|
iproc_pwmc_disable(ip, pwm->hwpwm);
|
|
|
|
/* Set prescale */
|
|
value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
|
|
value &= ~IPROC_PWM_PRESCALE_MASK(pwm->hwpwm);
|
|
value |= prescale << IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
|
|
writel(value, ip->base + IPROC_PWM_PRESCALE_OFFSET);
|
|
|
|
/* set period and duty cycle */
|
|
writel(period, ip->base + IPROC_PWM_PERIOD_OFFSET(pwm->hwpwm));
|
|
writel(duty, ip->base + IPROC_PWM_DUTY_CYCLE_OFFSET(pwm->hwpwm));
|
|
|
|
/* set polarity */
|
|
value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
if (state->polarity == PWM_POLARITY_NORMAL)
|
|
value |= 1 << IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm);
|
|
else
|
|
value &= ~(1 << IPROC_PWM_CTRL_POLARITY_SHIFT(pwm->hwpwm));
|
|
|
|
writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
if (state->enabled)
|
|
iproc_pwmc_enable(ip, pwm->hwpwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops iproc_pwm_ops = {
|
|
.apply = iproc_pwmc_apply,
|
|
.get_state = iproc_pwmc_get_state,
|
|
};
|
|
|
|
static int iproc_pwmc_probe(struct platform_device *pdev)
|
|
{
|
|
struct iproc_pwmc *ip;
|
|
struct resource *res;
|
|
unsigned int i;
|
|
u32 value;
|
|
int ret;
|
|
|
|
ip = devm_kzalloc(&pdev->dev, sizeof(*ip), GFP_KERNEL);
|
|
if (!ip)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, ip);
|
|
|
|
ip->chip.dev = &pdev->dev;
|
|
ip->chip.ops = &iproc_pwm_ops;
|
|
ip->chip.base = -1;
|
|
ip->chip.npwm = 4;
|
|
ip->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
ip->chip.of_pwm_n_cells = 3;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ip->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ip->base))
|
|
return PTR_ERR(ip->base);
|
|
|
|
ip->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(ip->clk)) {
|
|
dev_err(&pdev->dev, "failed to get clock: %ld\n",
|
|
PTR_ERR(ip->clk));
|
|
return PTR_ERR(ip->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(ip->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to enable clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Set full drive and normal polarity for all channels */
|
|
value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
for (i = 0; i < ip->chip.npwm; i++) {
|
|
value &= ~(1 << IPROC_PWM_CTRL_TYPE_SHIFT(i));
|
|
value |= 1 << IPROC_PWM_CTRL_POLARITY_SHIFT(i);
|
|
}
|
|
|
|
writel(value, ip->base + IPROC_PWM_CTRL_OFFSET);
|
|
|
|
ret = pwmchip_add(&ip->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
|
|
clk_disable_unprepare(ip->clk);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int iproc_pwmc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iproc_pwmc *ip = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(ip->clk);
|
|
|
|
return pwmchip_remove(&ip->chip);
|
|
}
|
|
|
|
static const struct of_device_id bcm_iproc_pwmc_dt[] = {
|
|
{ .compatible = "brcm,iproc-pwm" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm_iproc_pwmc_dt);
|
|
|
|
static struct platform_driver iproc_pwmc_driver = {
|
|
.driver = {
|
|
.name = "bcm-iproc-pwm",
|
|
.of_match_table = bcm_iproc_pwmc_dt,
|
|
},
|
|
.probe = iproc_pwmc_probe,
|
|
.remove = iproc_pwmc_remove,
|
|
};
|
|
module_platform_driver(iproc_pwmc_driver);
|
|
|
|
MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>");
|
|
MODULE_DESCRIPTION("Broadcom iProc PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|