alistair23-linux/drivers/usb
Keshava Munegowda 1fcb57d0f6 ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
It is observed that the echi ports of 3430 sdp board
are not working due to the random timing of programming
the associated GPIOs of the ULPI PHYs of the EHCI for reset.
If the PHYs are reset at during usbhs core driver, host ports will
not work because EHCI driver is loaded after the resetting PHYs.
The PHYs should be in reset state while initializing the EHCI
controller.
The code which does the GPIO pins associated with the PHYs
are programmed to reset is moved from the USB host core driver
to EHCI driver.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: Partha Basak <parthab@india.ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-16 18:47:00 +02:00
..
atm
c67x00
class USB merge for 3.4-rc1 2012-03-20 11:26:30 -07:00
core USB: fix bug of device descriptor got from superspeed device 2012-04-11 08:28:58 -07:00
dwc3 USB merge for 3.4-rc1 2012-03-20 11:26:30 -07:00
early
gadget Merge 3.2-rc1 into usb-linus 2012-04-08 08:26:51 -07:00
host ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue 2012-04-16 18:47:00 +02:00
image
misc
mon
musb Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2012-03-29 15:34:57 -07:00
otg usb: otg: ab8500-usb: make probe() work again 2012-03-02 16:22:11 -08:00
renesas_usbhs Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2012-03-29 15:34:57 -07:00
serial USB: serial: fix race between probe and open 2012-04-10 13:35:53 -07:00
storage usb: storage: fix lockdep warning inside usb_stor_pre_reset(v2) 2012-04-06 13:54:00 -07:00
wusbcore
Kconfig usb: Put USB Kconfig items back under USB. 2012-04-06 13:37:21 -07:00
Makefile
README
usb-common.c
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.