![Randy Dunlap](/assets/img/avatar_default.png)
Reported-by: Andrew Lyon <andrew.lyon@gmail.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
1833 lines
52 KiB
C
1833 lines
52 KiB
C
#undef FKS_LOGGING
|
|
#undef FKS_TEST
|
|
|
|
/*
|
|
* tabs should be 4 spaces, in vi(m): set tabstop=4
|
|
*
|
|
* TODO: consistency speed calculations!!
|
|
* cleanup!
|
|
* ????: Did I break MIDI support?
|
|
*
|
|
* History:
|
|
*
|
|
* Rolf Fokkens (Dec 20 1998): ES188x recording level support on a per
|
|
* fokkensr@vertis.nl input basis.
|
|
* (Dec 24 1998): Recognition of ES1788, ES1887, ES1888,
|
|
* ES1868, ES1869 and ES1878. Could be used for
|
|
* specific handling in the future. All except
|
|
* ES1887 and ES1888 and ES688 are handled like
|
|
* ES1688.
|
|
* (Dec 27 1998): RECLEV for all (?) ES1688+ chips. ES188x now
|
|
* have the "Dec 20" support + RECLEV
|
|
* (Jan 2 1999): Preparation for Full Duplex. This means
|
|
* Audio 2 is now used for playback when dma16
|
|
* is specified. The next step would be to use
|
|
* Audio 1 and Audio 2 at the same time.
|
|
* (Jan 9 1999): Put all ESS stuff into sb_ess.[ch], this
|
|
* includes both the ESS stuff that has been in
|
|
* sb_*[ch] before I touched it and the ESS support
|
|
* I added later
|
|
* (Jan 23 1999): Full Duplex seems to work. I wrote a small
|
|
* test proggy which works OK. Haven't found
|
|
* any applications to test it though. So why did
|
|
* I bother to create it anyway?? :) Just for
|
|
* fun.
|
|
* (May 2 1999): I tried to be too smart by "introducing"
|
|
* ess_calc_best_speed (). The idea was that two
|
|
* dividers could be used to setup a samplerate,
|
|
* ess_calc_best_speed () would choose the best.
|
|
* This works for playback, but results in
|
|
* recording problems for high samplerates. I
|
|
* fixed this by removing ess_calc_best_speed ()
|
|
* and just doing what the documentation says.
|
|
* Andy Sloane (Jun 4 1999): Stole some code from ALSA to fix the playback
|
|
* andy@guildsoftware.com speed on ES1869, ES1879, ES1887, and ES1888.
|
|
* 1879's were previously ignored by this driver;
|
|
* added (untested) support for those.
|
|
* Cvetan Ivanov (Oct 27 1999): Fixed ess_dsp_init to call ess_set_dma_hw for
|
|
* zezo@inet.bg _ALL_ ESS models, not only ES1887
|
|
*
|
|
* This files contains ESS chip specifics. It's based on the existing ESS
|
|
* handling as it resided in sb_common.c, sb_mixer.c and sb_audio.c. This
|
|
* file adds features like:
|
|
* - Chip Identification (as shown in /proc/sound)
|
|
* - RECLEV support for ES1688 and later
|
|
* - 6 bits playback level support chips later than ES1688
|
|
* - Recording level support on a per-device basis for ES1887
|
|
* - Full-Duplex for ES1887
|
|
*
|
|
* Full duplex is enabled by specifying dma16. While the normal dma must
|
|
* be one of 0, 1 or 3, dma16 can be one of 0, 1, 3 or 5. DMA 5 is a 16 bit
|
|
* DMA channel, while the others are 8 bit..
|
|
*
|
|
* ESS detection isn't full proof (yet). If it fails an additional module
|
|
* parameter esstype can be specified to be one of the following:
|
|
* -1, 0, 688, 1688, 1868, 1869, 1788, 1887, 1888
|
|
* -1 means: mimic 2.0 behaviour,
|
|
* 0 means: auto detect.
|
|
* others: explicitly specify chip
|
|
* -1 is default, cause auto detect still doesn't work.
|
|
*/
|
|
|
|
/*
|
|
* About the documentation
|
|
*
|
|
* I don't know if the chips all are OK, but the documentation is buggy. 'cause
|
|
* I don't have all the cips myself, there's a lot I cannot verify. I'll try to
|
|
* keep track of my latest insights about his here. If you have additional info,
|
|
* please enlighten me (fokkensr@vertis.nl)!
|
|
*
|
|
* I had the impression that ES1688 also has 6 bit master volume control. The
|
|
* documentation about ES1888 (rev C, october '95) claims that ES1888 has
|
|
* the following features ES1688 doesn't have:
|
|
* - 6 bit master volume
|
|
* - Full Duplex
|
|
* So ES1688 apparently doesn't have 6 bit master volume control, but the
|
|
* ES1688 does have RECLEV control. Makes me wonder: does ES688 have it too?
|
|
* Without RECLEV ES688 won't be much fun I guess.
|
|
*
|
|
* From the ES1888 (rev C, october '95) documentation I got the impression
|
|
* that registers 0x68 to 0x6e don't exist which means: no recording volume
|
|
* controls. To my surprise the ES888 documentation (1/14/96) claims that
|
|
* ES888 does have these record mixer registers, but that ES1888 doesn't have
|
|
* 0x69 and 0x6b. So the rest should be there.
|
|
*
|
|
* I'm trying to get ES1887 Full Duplex. Audio 2 is playback only, while Audio 2
|
|
* is both record and playback. I think I should use Audio 2 for all playback.
|
|
*
|
|
* The documentation is an adventure: it's close but not fully accurate. I
|
|
* found out that after a reset some registers are *NOT* reset, though the
|
|
* docs say the would be. Interesting ones are 0x7f, 0x7d and 0x7a. They are
|
|
* related to the Audio 2 channel. I also was surprised about the consequences
|
|
* of writing 0x00 to 0x7f (which should be done by reset): The ES1887 moves
|
|
* into ES1888 mode. This means that it claims IRQ 11, which happens to be my
|
|
* ISDN adapter. Needless to say it no longer worked. I now understand why
|
|
* after rebooting 0x7f already was 0x05, the value of my choice: the BIOS
|
|
* did it.
|
|
*
|
|
* Oh, and this is another trap: in ES1887 docs mixer register 0x70 is
|
|
* described as if it's exactly the same as register 0xa1. This is *NOT* true.
|
|
* The description of 0x70 in ES1869 docs is accurate however.
|
|
* Well, the assumption about ES1869 was wrong: register 0x70 is very much
|
|
* like register 0xa1, except that bit 7 is always 1, whatever you want
|
|
* it to be.
|
|
*
|
|
* When using audio 2 mixer register 0x72 seems te be meaningless. Only 0xa2
|
|
* has effect.
|
|
*
|
|
* Software reset not being able to reset all registers is great! Especially
|
|
* the fact that register 0x78 isn't reset is great when you wanna change back
|
|
* to single dma operation (simplex): audio 2 is still operational, and uses
|
|
* the same dma as audio 1: your ess changes into a funny echo machine.
|
|
*
|
|
* Received the news that ES1688 is detected as a ES1788. Did some thinking:
|
|
* the ES1887 detection scheme suggests in step 2 to try if bit 3 of register
|
|
* 0x64 can be changed. This is inaccurate, first I inverted the * check: "If
|
|
* can be modified, it's a 1688", which lead to a correct detection
|
|
* of my ES1887. It resulted however in bad detection of 1688 (reported by mail)
|
|
* and 1868 (if no PnP detection first): they result in a 1788 being detected.
|
|
* I don't have docs on 1688, but I do have docs on 1868: The documentation is
|
|
* probably inaccurate in the fact that I should check bit 2, not bit 3. This
|
|
* is what I do now.
|
|
*/
|
|
|
|
/*
|
|
* About recognition of ESS chips
|
|
*
|
|
* The distinction of ES688, ES1688, ES1788, ES1887 and ES1888 is described in
|
|
* a (preliminary ??) datasheet on ES1887. Its aim is to identify ES1887, but
|
|
* during detection the text claims that "this chip may be ..." when a step
|
|
* fails. This scheme is used to distinct between the above chips.
|
|
* It appears however that some PnP chips like ES1868 are recognized as ES1788
|
|
* by the ES1887 detection scheme. These PnP chips can be detected in another
|
|
* way however: ES1868, ES1869 and ES1878 can be recognized (full proof I think)
|
|
* by repeatedly reading mixer register 0x40. This is done by ess_identify in
|
|
* sb_common.c.
|
|
* This results in the following detection steps:
|
|
* - distinct between ES688 and ES1688+ (as always done in this driver)
|
|
* if ES688 we're ready
|
|
* - try to detect ES1868, ES1869 or ES1878
|
|
* if successful we're ready
|
|
* - try to detect ES1888, ES1887 or ES1788
|
|
* if successful we're ready
|
|
* - Dunno. Must be 1688. Will do in general
|
|
*
|
|
* About RECLEV support:
|
|
*
|
|
* The existing ES1688 support didn't take care of the ES1688+ recording
|
|
* levels very well. Whenever a device was selected (recmask) for recording
|
|
* its recording level was loud, and it couldn't be changed. The fact that
|
|
* internal register 0xb4 could take care of RECLEV, didn't work meaning until
|
|
* its value was restored every time the chip was reset; this reset the
|
|
* value of 0xb4 too. I guess that's what 4front also had (have?) trouble with.
|
|
*
|
|
* About ES1887 support:
|
|
*
|
|
* The ES1887 has separate registers to control the recording levels, for all
|
|
* inputs. The ES1887 specific software makes these levels the same as their
|
|
* corresponding playback levels, unless recmask says they aren't recorded. In
|
|
* the latter case the recording volumes are 0.
|
|
* Now recording levels of inputs can be controlled, by changing the playback
|
|
* levels. Futhermore several devices can be recorded together (which is not
|
|
* possible with the ES1688).
|
|
* Besides the separate recording level control for each input, the common
|
|
* recording level can also be controlled by RECLEV as described above.
|
|
*
|
|
* Not only ES1887 have this recording mixer. I know the following from the
|
|
* documentation:
|
|
* ES688 no
|
|
* ES1688 no
|
|
* ES1868 no
|
|
* ES1869 yes
|
|
* ES1878 no
|
|
* ES1879 yes
|
|
* ES1888 no/yes Contradicting documentation; most recent: yes
|
|
* ES1946 yes This is a PCI chip; not handled by this driver
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "sound_config.h"
|
|
#include "sb_mixer.h"
|
|
#include "sb.h"
|
|
|
|
#include "sb_ess.h"
|
|
|
|
#define ESSTYPE_LIKE20 -1 /* Mimic 2.0 behaviour */
|
|
#define ESSTYPE_DETECT 0 /* Mimic 2.0 behaviour */
|
|
|
|
#define SUBMDL_ES1788 0x10 /* Subtype ES1788 for specific handling */
|
|
#define SUBMDL_ES1868 0x11 /* Subtype ES1868 for specific handling */
|
|
#define SUBMDL_ES1869 0x12 /* Subtype ES1869 for specific handling */
|
|
#define SUBMDL_ES1878 0x13 /* Subtype ES1878 for specific handling */
|
|
#define SUBMDL_ES1879 0x16 /* ES1879 was initially forgotten */
|
|
#define SUBMDL_ES1887 0x14 /* Subtype ES1887 for specific handling */
|
|
#define SUBMDL_ES1888 0x15 /* Subtype ES1888 for specific handling */
|
|
|
|
#define SB_CAP_ES18XX_RATE 0x100
|
|
|
|
#define ES1688_CLOCK1 795444 /* 128 - div */
|
|
#define ES1688_CLOCK2 397722 /* 256 - div */
|
|
#define ES18XX_CLOCK1 793800 /* 128 - div */
|
|
#define ES18XX_CLOCK2 768000 /* 256 - div */
|
|
|
|
#ifdef FKS_LOGGING
|
|
static void ess_show_mixerregs (sb_devc *devc);
|
|
#endif
|
|
static int ess_read (sb_devc * devc, unsigned char reg);
|
|
static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data);
|
|
static void ess_chgmixer
|
|
(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val);
|
|
|
|
/****************************************************************************
|
|
* *
|
|
* ESS audio *
|
|
* *
|
|
****************************************************************************/
|
|
|
|
struct ess_command {short cmd; short data;};
|
|
|
|
/*
|
|
* Commands for initializing Audio 1 for input (record)
|
|
*/
|
|
static struct ess_command ess_i08m[] = /* input 8 bit mono */
|
|
{ {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} };
|
|
static struct ess_command ess_i16m[] = /* input 16 bit mono */
|
|
{ {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} };
|
|
static struct ess_command ess_i08s[] = /* input 8 bit stereo */
|
|
{ {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} };
|
|
static struct ess_command ess_i16s[] = /* input 16 bit stereo */
|
|
{ {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} };
|
|
|
|
static struct ess_command *ess_inp_cmds[] =
|
|
{ ess_i08m, ess_i16m, ess_i08s, ess_i16s };
|
|
|
|
|
|
/*
|
|
* Commands for initializing Audio 1 for output (playback)
|
|
*/
|
|
static struct ess_command ess_o08m[] = /* output 8 bit mono */
|
|
{ {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} };
|
|
static struct ess_command ess_o16m[] = /* output 16 bit mono */
|
|
{ {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} };
|
|
static struct ess_command ess_o08s[] = /* output 8 bit stereo */
|
|
{ {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} };
|
|
static struct ess_command ess_o16s[] = /* output 16 bit stereo */
|
|
{ {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} };
|
|
|
|
static struct ess_command *ess_out_cmds[] =
|
|
{ ess_o08m, ess_o16m, ess_o08s, ess_o16s };
|
|
|
|
static void ess_exec_commands
|
|
(sb_devc *devc, struct ess_command *cmdtab[])
|
|
{
|
|
struct ess_command *cmd;
|
|
|
|
cmd = cmdtab [ ((devc->channels != 1) << 1) + (devc->bits != AFMT_U8) ];
|
|
|
|
while (cmd->cmd != -1) {
|
|
ess_write (devc, cmd->cmd, cmd->data);
|
|
cmd++;
|
|
}
|
|
}
|
|
|
|
static void ess_change
|
|
(sb_devc *devc, unsigned int reg, unsigned int mask, unsigned int val)
|
|
{
|
|
int value;
|
|
|
|
value = ess_read (devc, reg);
|
|
value = (value & ~mask) | (val & mask);
|
|
ess_write (devc, reg, value);
|
|
}
|
|
|
|
static void ess_set_output_parms
|
|
(int dev, unsigned long buf, int nr_bytes, int intrflag)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
if (devc->duplex) {
|
|
devc->trg_buf_16 = buf;
|
|
devc->trg_bytes_16 = nr_bytes;
|
|
devc->trg_intrflag_16 = intrflag;
|
|
devc->irq_mode_16 = IMODE_OUTPUT;
|
|
} else {
|
|
devc->trg_buf = buf;
|
|
devc->trg_bytes = nr_bytes;
|
|
devc->trg_intrflag = intrflag;
|
|
devc->irq_mode = IMODE_OUTPUT;
|
|
}
|
|
}
|
|
|
|
static void ess_set_input_parms
|
|
(int dev, unsigned long buf, int count, int intrflag)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
devc->trg_buf = buf;
|
|
devc->trg_bytes = count;
|
|
devc->trg_intrflag = intrflag;
|
|
devc->irq_mode = IMODE_INPUT;
|
|
}
|
|
|
|
static int ess_calc_div (int clock, int revert, int *speedp, int *diffp)
|
|
{
|
|
int divider;
|
|
int speed, diff;
|
|
int retval;
|
|
|
|
speed = *speedp;
|
|
divider = (clock + speed / 2) / speed;
|
|
retval = revert - divider;
|
|
if (retval > revert - 1) {
|
|
retval = revert - 1;
|
|
divider = revert - retval;
|
|
}
|
|
/* This line is suggested. Must be wrong I think
|
|
*speedp = (clock + divider / 2) / divider;
|
|
So I chose the next one */
|
|
|
|
*speedp = clock / divider;
|
|
diff = speed - *speedp;
|
|
if (diff < 0) diff =-diff;
|
|
*diffp = diff;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int ess_calc_best_speed
|
|
(int clock1, int rev1, int clock2, int rev2, int *divp, int *speedp)
|
|
{
|
|
int speed1 = *speedp, speed2 = *speedp;
|
|
int div1, div2;
|
|
int diff1, diff2;
|
|
int retval;
|
|
|
|
div1 = ess_calc_div (clock1, rev1, &speed1, &diff1);
|
|
div2 = ess_calc_div (clock2, rev2, &speed2, &diff2);
|
|
|
|
if (diff1 < diff2) {
|
|
*divp = div1;
|
|
*speedp = speed1;
|
|
retval = 1;
|
|
} else {
|
|
/* *divp = div2; */
|
|
*divp = 0x80 | div2;
|
|
*speedp = speed2;
|
|
retval = 2;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Depending on the audiochannel ESS devices can
|
|
* have different clock settings. These are made consistent for duplex
|
|
* however.
|
|
* callers of ess_speed only do an audionum suggestion, which means
|
|
* input suggests 1, output suggests 2. This suggestion is only true
|
|
* however when doing duplex.
|
|
*/
|
|
static void ess_common_speed (sb_devc *devc, int *speedp, int *divp)
|
|
{
|
|
int diff = 0, div;
|
|
|
|
if (devc->duplex) {
|
|
/*
|
|
* The 0x80 is important for the first audio channel
|
|
*/
|
|
if (devc->submodel == SUBMDL_ES1888) {
|
|
div = 0x80 | ess_calc_div (795500, 256, speedp, &diff);
|
|
} else {
|
|
div = 0x80 | ess_calc_div (795500, 128, speedp, &diff);
|
|
}
|
|
} else if(devc->caps & SB_CAP_ES18XX_RATE) {
|
|
if (devc->submodel == SUBMDL_ES1888) {
|
|
ess_calc_best_speed(397700, 128, 795500, 256,
|
|
&div, speedp);
|
|
} else {
|
|
ess_calc_best_speed(ES18XX_CLOCK1, 128, ES18XX_CLOCK2, 256,
|
|
&div, speedp);
|
|
}
|
|
} else {
|
|
if (*speedp > 22000) {
|
|
div = 0x80 | ess_calc_div (ES1688_CLOCK1, 256, speedp, &diff);
|
|
} else {
|
|
div = 0x00 | ess_calc_div (ES1688_CLOCK2, 128, speedp, &diff);
|
|
}
|
|
}
|
|
*divp = div;
|
|
}
|
|
|
|
static void ess_speed (sb_devc *devc, int audionum)
|
|
{
|
|
int speed;
|
|
int div, div2;
|
|
|
|
ess_common_speed (devc, &(devc->speed), &div);
|
|
|
|
#ifdef FKS_REG_LOGGING
|
|
printk (KERN_INFO "FKS: ess_speed (%d) b speed = %d, div=%x\n", audionum, devc->speed, div);
|
|
#endif
|
|
|
|
/* Set filter roll-off to 90% of speed/2 */
|
|
speed = (devc->speed * 9) / 20;
|
|
|
|
div2 = 256 - 7160000 / (speed * 82);
|
|
|
|
if (!devc->duplex) audionum = 1;
|
|
|
|
if (audionum == 1) {
|
|
/* Change behaviour of register A1 *
|
|
sb_chg_mixer(devc, 0x71, 0x20, 0x20)
|
|
* For ES1869 only??? */
|
|
ess_write (devc, 0xa1, div);
|
|
ess_write (devc, 0xa2, div2);
|
|
} else {
|
|
ess_setmixer (devc, 0x70, div);
|
|
/*
|
|
* FKS: fascinating: 0x72 doesn't seem to work.
|
|
*/
|
|
ess_write (devc, 0xa2, div2);
|
|
ess_setmixer (devc, 0x72, div2);
|
|
}
|
|
}
|
|
|
|
static int ess_audio_prepare_for_input(int dev, int bsize, int bcount)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
ess_speed(devc, 1);
|
|
|
|
sb_dsp_command(devc, DSP_CMD_SPKOFF);
|
|
|
|
ess_write (devc, 0xb8, 0x0e); /* Auto init DMA mode */
|
|
ess_change (devc, 0xa8, 0x03, 3 - devc->channels); /* Mono/stereo */
|
|
ess_write (devc, 0xb9, 2); /* Demand mode (4 bytes/DMA request) */
|
|
|
|
ess_exec_commands (devc, ess_inp_cmds);
|
|
|
|
ess_change (devc, 0xb1, 0xf0, 0x50);
|
|
ess_change (devc, 0xb2, 0xf0, 0x50);
|
|
|
|
devc->trigger_bits = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int ess_audio_prepare_for_output_audio1 (int dev, int bsize, int bcount)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
sb_dsp_reset(devc);
|
|
ess_speed(devc, 1);
|
|
ess_write (devc, 0xb8, 4); /* Auto init DMA mode */
|
|
ess_change (devc, 0xa8, 0x03, 3 - devc->channels); /* Mono/stereo */
|
|
ess_write (devc, 0xb9, 2); /* Demand mode (4 bytes/request) */
|
|
|
|
ess_exec_commands (devc, ess_out_cmds);
|
|
|
|
ess_change (devc, 0xb1, 0xf0, 0x50); /* Enable DMA */
|
|
ess_change (devc, 0xb2, 0xf0, 0x50); /* Enable IRQ */
|
|
|
|
sb_dsp_command(devc, DSP_CMD_SPKON); /* There be sound! */
|
|
|
|
devc->trigger_bits = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int ess_audio_prepare_for_output_audio2 (int dev, int bsize, int bcount)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
unsigned char bits;
|
|
|
|
/* FKS: qqq
|
|
sb_dsp_reset(devc);
|
|
*/
|
|
|
|
/*
|
|
* Auto-Initialize:
|
|
* DMA mode + demand mode (8 bytes/request, yes I want it all!)
|
|
* But leave 16-bit DMA bit untouched!
|
|
*/
|
|
ess_chgmixer (devc, 0x78, 0xd0, 0xd0);
|
|
|
|
ess_speed(devc, 2);
|
|
|
|
/* bits 4:3 on ES1887 represent recording source. Keep them! */
|
|
bits = ess_getmixer (devc, 0x7a) & 0x18;
|
|
|
|
/* Set stereo/mono */
|
|
if (devc->channels != 1) bits |= 0x02;
|
|
|
|
/* Init DACs; UNSIGNED mode for 8 bit; SIGNED mode for 16 bit */
|
|
if (devc->bits != AFMT_U8) bits |= 0x05; /* 16 bit */
|
|
|
|
/* Enable DMA, IRQ will be shared (hopefully)*/
|
|
bits |= 0x60;
|
|
|
|
ess_setmixer (devc, 0x7a, bits);
|
|
|
|
ess_mixer_reload (devc, SOUND_MIXER_PCM); /* There be sound! */
|
|
|
|
devc->trigger_bits = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int ess_audio_prepare_for_output(int dev, int bsize, int bcount)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
#ifdef FKS_REG_LOGGING
|
|
printk(KERN_INFO "ess_audio_prepare_for_output: dma_out=%d,dma_in=%d\n"
|
|
, audio_devs[dev]->dmap_out->dma, audio_devs[dev]->dmap_in->dma);
|
|
#endif
|
|
|
|
if (devc->duplex) {
|
|
return ess_audio_prepare_for_output_audio2 (dev, bsize, bcount);
|
|
} else {
|
|
return ess_audio_prepare_for_output_audio1 (dev, bsize, bcount);
|
|
}
|
|
}
|
|
|
|
static void ess_audio_halt_xfer(int dev)
|
|
{
|
|
unsigned long flags;
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
sb_dsp_reset(devc);
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
|
|
/*
|
|
* Audio 2 may still be operational! Creates awful sounds!
|
|
*/
|
|
if (devc->duplex) ess_chgmixer(devc, 0x78, 0x03, 0x00);
|
|
}
|
|
|
|
static void ess_audio_start_input
|
|
(int dev, unsigned long buf, int nr_bytes, int intrflag)
|
|
{
|
|
int count = nr_bytes;
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
short c = -nr_bytes;
|
|
|
|
/*
|
|
* Start a DMA input to the buffer pointed by dmaqtail
|
|
*/
|
|
|
|
if (audio_devs[dev]->dmap_in->dma > 3) count >>= 1;
|
|
count--;
|
|
|
|
devc->irq_mode = IMODE_INPUT;
|
|
|
|
ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff));
|
|
ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff));
|
|
|
|
ess_change (devc, 0xb8, 0x0f, 0x0f); /* Go */
|
|
devc->intr_active = 1;
|
|
}
|
|
|
|
static void ess_audio_output_block_audio1
|
|
(int dev, unsigned long buf, int nr_bytes, int intrflag)
|
|
{
|
|
int count = nr_bytes;
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
short c = -nr_bytes;
|
|
|
|
if (audio_devs[dev]->dmap_out->dma > 3)
|
|
count >>= 1;
|
|
count--;
|
|
|
|
devc->irq_mode = IMODE_OUTPUT;
|
|
|
|
ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff));
|
|
ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff));
|
|
|
|
ess_change (devc, 0xb8, 0x05, 0x05); /* Go */
|
|
devc->intr_active = 1;
|
|
}
|
|
|
|
static void ess_audio_output_block_audio2
|
|
(int dev, unsigned long buf, int nr_bytes, int intrflag)
|
|
{
|
|
int count = nr_bytes;
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
short c = -nr_bytes;
|
|
|
|
if (audio_devs[dev]->dmap_out->dma > 3) count >>= 1;
|
|
count--;
|
|
|
|
ess_setmixer (devc, 0x74, (unsigned char) ((unsigned short) c & 0xff));
|
|
ess_setmixer (devc, 0x76, (unsigned char) (((unsigned short) c >> 8) & 0xff));
|
|
ess_chgmixer (devc, 0x78, 0x03, 0x03); /* Go */
|
|
|
|
devc->irq_mode_16 = IMODE_OUTPUT;
|
|
devc->intr_active_16 = 1;
|
|
}
|
|
|
|
static void ess_audio_output_block
|
|
(int dev, unsigned long buf, int nr_bytes, int intrflag)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
if (devc->duplex) {
|
|
ess_audio_output_block_audio2 (dev, buf, nr_bytes, intrflag);
|
|
} else {
|
|
ess_audio_output_block_audio1 (dev, buf, nr_bytes, intrflag);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* FKS: the if-statements for both bits and bits_16 are quite alike.
|
|
* Combine this...
|
|
*/
|
|
static void ess_audio_trigger(int dev, int bits)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
int bits_16 = bits & devc->irq_mode_16;
|
|
bits &= devc->irq_mode;
|
|
|
|
if (!bits && !bits_16) {
|
|
/* FKS oh oh.... wrong?? for dma 16? */
|
|
sb_dsp_command(devc, 0xd0); /* Halt DMA */
|
|
}
|
|
|
|
if (bits) {
|
|
switch (devc->irq_mode)
|
|
{
|
|
case IMODE_INPUT:
|
|
ess_audio_start_input(dev, devc->trg_buf, devc->trg_bytes,
|
|
devc->trg_intrflag);
|
|
break;
|
|
|
|
case IMODE_OUTPUT:
|
|
ess_audio_output_block(dev, devc->trg_buf, devc->trg_bytes,
|
|
devc->trg_intrflag);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (bits_16) {
|
|
switch (devc->irq_mode_16) {
|
|
case IMODE_INPUT:
|
|
ess_audio_start_input(dev, devc->trg_buf_16, devc->trg_bytes_16,
|
|
devc->trg_intrflag_16);
|
|
break;
|
|
|
|
case IMODE_OUTPUT:
|
|
ess_audio_output_block(dev, devc->trg_buf_16, devc->trg_bytes_16,
|
|
devc->trg_intrflag_16);
|
|
break;
|
|
}
|
|
}
|
|
|
|
devc->trigger_bits = bits | bits_16;
|
|
}
|
|
|
|
static int ess_audio_set_speed(int dev, int speed)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
int minspeed, maxspeed, dummydiv;
|
|
|
|
if (speed > 0) {
|
|
minspeed = (devc->duplex ? 6215 : 5000 );
|
|
maxspeed = (devc->duplex ? 44100 : 48000);
|
|
if (speed < minspeed) speed = minspeed;
|
|
if (speed > maxspeed) speed = maxspeed;
|
|
|
|
ess_common_speed (devc, &speed, &dummydiv);
|
|
|
|
devc->speed = speed;
|
|
}
|
|
return devc->speed;
|
|
}
|
|
|
|
/*
|
|
* FKS: This is a one-on-one copy of sb1_audio_set_bits
|
|
*/
|
|
static unsigned int ess_audio_set_bits(int dev, unsigned int bits)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
if (bits != 0) {
|
|
if (bits == AFMT_U8 || bits == AFMT_S16_LE) {
|
|
devc->bits = bits;
|
|
} else {
|
|
devc->bits = AFMT_U8;
|
|
}
|
|
}
|
|
|
|
return devc->bits;
|
|
}
|
|
|
|
/*
|
|
* FKS: This is a one-on-one copy of sbpro_audio_set_channels
|
|
* (*) Modified it!!
|
|
*/
|
|
static short ess_audio_set_channels(int dev, short channels)
|
|
{
|
|
sb_devc *devc = audio_devs[dev]->devc;
|
|
|
|
if (channels == 1 || channels == 2) devc->channels = channels;
|
|
|
|
return devc->channels;
|
|
}
|
|
|
|
static struct audio_driver ess_audio_driver = /* ESS ES688/1688 */
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.open = sb_audio_open,
|
|
.close = sb_audio_close,
|
|
.output_block = ess_set_output_parms,
|
|
.start_input = ess_set_input_parms,
|
|
.prepare_for_input = ess_audio_prepare_for_input,
|
|
.prepare_for_output = ess_audio_prepare_for_output,
|
|
.halt_io = ess_audio_halt_xfer,
|
|
.trigger = ess_audio_trigger,
|
|
.set_speed = ess_audio_set_speed,
|
|
.set_bits = ess_audio_set_bits,
|
|
.set_channels = ess_audio_set_channels
|
|
};
|
|
|
|
/*
|
|
* ess_audio_init must be called from sb_audio_init
|
|
*/
|
|
struct audio_driver *ess_audio_init
|
|
(sb_devc *devc, int *audio_flags, int *format_mask)
|
|
{
|
|
*audio_flags = DMA_AUTOMODE;
|
|
*format_mask |= AFMT_S16_LE;
|
|
|
|
if (devc->duplex) {
|
|
int tmp_dma;
|
|
/*
|
|
* sb_audio_init thinks dma8 is for playback and
|
|
* dma16 is for record. Not now! So swap them.
|
|
*/
|
|
tmp_dma = devc->dma16;
|
|
devc->dma16 = devc->dma8;
|
|
devc->dma8 = tmp_dma;
|
|
|
|
*audio_flags |= DMA_DUPLEX;
|
|
}
|
|
|
|
return &ess_audio_driver;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* *
|
|
* ESS common *
|
|
* *
|
|
****************************************************************************/
|
|
static void ess_handle_channel
|
|
(char *channel, int dev, int intr_active, unsigned char flag, int irq_mode)
|
|
{
|
|
if (!intr_active || !flag) return;
|
|
#ifdef FKS_REG_LOGGING
|
|
printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode);
|
|
#endif
|
|
switch (irq_mode) {
|
|
case IMODE_OUTPUT:
|
|
DMAbuf_outputintr (dev, 1);
|
|
break;
|
|
|
|
case IMODE_INPUT:
|
|
DMAbuf_inputintr (dev);
|
|
break;
|
|
|
|
case IMODE_INIT:
|
|
break;
|
|
|
|
default:;
|
|
/* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* FKS: TODO!!! Finish this!
|
|
*
|
|
* I think midi stuff uses uart401, without interrupts.
|
|
* So IMODE_MIDI isn't a value for devc->irq_mode.
|
|
*/
|
|
void ess_intr (sb_devc *devc)
|
|
{
|
|
int status;
|
|
unsigned char src;
|
|
|
|
if (devc->submodel == SUBMDL_ES1887) {
|
|
src = ess_getmixer (devc, 0x7f) >> 4;
|
|
} else {
|
|
src = 0xff;
|
|
}
|
|
|
|
#ifdef FKS_REG_LOGGING
|
|
printk(KERN_INFO "FKS: sbintr src=%x\n",(int)src);
|
|
#endif
|
|
ess_handle_channel
|
|
( "Audio 1"
|
|
, devc->dev, devc->intr_active , src & 0x01, devc->irq_mode );
|
|
ess_handle_channel
|
|
( "Audio 2"
|
|
, devc->dev, devc->intr_active_16, src & 0x02, devc->irq_mode_16);
|
|
/*
|
|
* Acknowledge interrupts
|
|
*/
|
|
if (devc->submodel == SUBMDL_ES1887 && (src & 0x02)) {
|
|
ess_chgmixer (devc, 0x7a, 0x80, 0x00);
|
|
}
|
|
|
|
if (src & 0x01) {
|
|
status = inb(DSP_DATA_AVAIL);
|
|
}
|
|
}
|
|
|
|
static void ess_extended (sb_devc * devc)
|
|
{
|
|
/* Enable extended mode */
|
|
|
|
sb_dsp_command(devc, 0xc6);
|
|
}
|
|
|
|
static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data)
|
|
{
|
|
#ifdef FKS_REG_LOGGING
|
|
printk(KERN_INFO "FKS: write reg %x: %x\n", reg, data);
|
|
#endif
|
|
/* Write a byte to an extended mode register of ES1688 */
|
|
|
|
if (!sb_dsp_command(devc, reg))
|
|
return 0;
|
|
|
|
return sb_dsp_command(devc, data);
|
|
}
|
|
|
|
static int ess_read (sb_devc * devc, unsigned char reg)
|
|
{
|
|
/* Read a byte from an extended mode register of ES1688 */
|
|
|
|
/* Read register command */
|
|
if (!sb_dsp_command(devc, 0xc0)) return -1;
|
|
|
|
if (!sb_dsp_command(devc, reg )) return -1;
|
|
|
|
return sb_dsp_get_byte(devc);
|
|
}
|
|
|
|
int ess_dsp_reset(sb_devc * devc)
|
|
{
|
|
int loopc;
|
|
|
|
#ifdef FKS_REG_LOGGING
|
|
printk(KERN_INFO "FKS: ess_dsp_reset 1\n");
|
|
ess_show_mixerregs (devc);
|
|
#endif
|
|
|
|
DEB(printk("Entered ess_dsp_reset()\n"));
|
|
|
|
outb(3, DSP_RESET); /* Reset FIFO too */
|
|
|
|
udelay(10);
|
|
outb(0, DSP_RESET);
|
|
udelay(30);
|
|
|
|
for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
|
|
|
|
if (inb(DSP_READ) != 0xAA) {
|
|
DDB(printk("sb: No response to RESET\n"));
|
|
return 0; /* Sorry */
|
|
}
|
|
ess_extended (devc);
|
|
|
|
DEB(printk("sb_dsp_reset() OK\n"));
|
|
|
|
#ifdef FKS_LOGGING
|
|
printk(KERN_INFO "FKS: dsp_reset 2\n");
|
|
ess_show_mixerregs (devc);
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int ess_irq_bits (int irq)
|
|
{
|
|
switch (irq) {
|
|
case 2:
|
|
case 9:
|
|
return 0;
|
|
|
|
case 5:
|
|
return 1;
|
|
|
|
case 7:
|
|
return 2;
|
|
|
|
case 10:
|
|
return 3;
|
|
|
|
default:
|
|
printk(KERN_ERR "ESS1688: Invalid IRQ %d\n", irq);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set IRQ configuration register for all ESS models
|
|
*/
|
|
static int ess_common_set_irq_hw (sb_devc * devc)
|
|
{
|
|
int irq_bits;
|
|
|
|
if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return 0;
|
|
|
|
if (!ess_write (devc, 0xb1, 0x50 | (irq_bits << 2))) {
|
|
printk(KERN_ERR "ES1688: Failed to write to IRQ config register\n");
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* I wanna use modern ES1887 mixer irq handling. Funny is the
|
|
* fact that my BIOS wants the same. But suppose someone's BIOS
|
|
* doesn't do this!
|
|
* This is independent of duplex. If there's a 1887 this will
|
|
* prevent it from going into 1888 mode.
|
|
*/
|
|
static void ess_es1887_set_irq_hw (sb_devc * devc)
|
|
{
|
|
int irq_bits;
|
|
|
|
if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return;
|
|
|
|
ess_chgmixer (devc, 0x7f, 0x0f, 0x01 | ((irq_bits + 1) << 1));
|
|
}
|
|
|
|
static int ess_set_irq_hw (sb_devc * devc)
|
|
{
|
|
if (devc->submodel == SUBMDL_ES1887) ess_es1887_set_irq_hw (devc);
|
|
|
|
return ess_common_set_irq_hw (devc);
|
|
}
|
|
|
|
#ifdef FKS_TEST
|
|
|
|
/*
|
|
* FKS_test:
|
|
* for ES1887: 00, 18, non wr bits: 0001 1000
|
|
* for ES1868: 00, b8, non wr bits: 1011 1000
|
|
* for ES1888: 00, f8, non wr bits: 1111 1000
|
|
* for ES1688: 00, f8, non wr bits: 1111 1000
|
|
* + ES968
|
|
*/
|
|
|
|
static void FKS_test (sb_devc * devc)
|
|
{
|
|
int val1, val2;
|
|
val1 = ess_getmixer (devc, 0x64);
|
|
ess_setmixer (devc, 0x64, ~val1);
|
|
val2 = ess_getmixer (devc, 0x64) ^ ~val1;
|
|
ess_setmixer (devc, 0x64, val1);
|
|
val1 ^= ess_getmixer (devc, 0x64);
|
|
printk (KERN_INFO "FKS: FKS_test %02x, %02x\n", (val1 & 0x0ff), (val2 & 0x0ff));
|
|
};
|
|
#endif
|
|
|
|
static unsigned int ess_identify (sb_devc * devc)
|
|
{
|
|
unsigned int val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
outb(((unsigned char) (0x40 & 0xff)), MIXER_ADDR);
|
|
|
|
udelay(20);
|
|
val = inb(MIXER_DATA) << 8;
|
|
udelay(20);
|
|
val |= inb(MIXER_DATA);
|
|
udelay(20);
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* ESS technology describes a detection scheme in their docs. It involves
|
|
* fiddling with the bits in certain mixer registers. ess_probe is supposed
|
|
* to help.
|
|
*
|
|
* FKS: tracing shows ess_probe writes wrong value to 0x64. Bit 3 reads 1, but
|
|
* should be written 0 only. Check this.
|
|
*/
|
|
static int ess_probe (sb_devc * devc, int reg, int xorval)
|
|
{
|
|
int val1, val2, val3;
|
|
|
|
val1 = ess_getmixer (devc, reg);
|
|
val2 = val1 ^ xorval;
|
|
ess_setmixer (devc, reg, val2);
|
|
val3 = ess_getmixer (devc, reg);
|
|
ess_setmixer (devc, reg, val1);
|
|
|
|
return (val2 == val3);
|
|
}
|
|
|
|
int ess_init(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
unsigned char cfg;
|
|
int ess_major = 0, ess_minor = 0;
|
|
int i;
|
|
static char name[100], modelname[10];
|
|
|
|
/*
|
|
* Try to detect ESS chips.
|
|
*/
|
|
|
|
sb_dsp_command(devc, 0xe7); /* Return identification */
|
|
|
|
for (i = 1000; i; i--) {
|
|
if (inb(DSP_DATA_AVAIL) & 0x80) {
|
|
if (ess_major == 0) {
|
|
ess_major = inb(DSP_READ);
|
|
} else {
|
|
ess_minor = inb(DSP_READ);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ess_major == 0) return 0;
|
|
|
|
if (ess_major == 0x48 && (ess_minor & 0xf0) == 0x80) {
|
|
sprintf(name, "ESS ES488 AudioDrive (rev %d)",
|
|
ess_minor & 0x0f);
|
|
hw_config->name = name;
|
|
devc->model = MDL_SBPRO;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* This the detection heuristic of ESS technology, though somewhat
|
|
* changed to actually make it work.
|
|
* This results in the following detection steps:
|
|
* - distinct between ES688 and ES1688+ (as always done in this driver)
|
|
* if ES688 we're ready
|
|
* - try to detect ES1868, ES1869 or ES1878 (ess_identify)
|
|
* if successful we're ready
|
|
* - try to detect ES1888, ES1887 or ES1788 (aim: detect ES1887)
|
|
* if successful we're ready
|
|
* - Dunno. Must be 1688. Will do in general
|
|
*
|
|
* This is the most BETA part of the software: Will the detection
|
|
* always work?
|
|
*/
|
|
devc->model = MDL_ESS;
|
|
devc->submodel = ess_minor & 0x0f;
|
|
|
|
if (ess_major == 0x68 && (ess_minor & 0xf0) == 0x80) {
|
|
char *chip = NULL;
|
|
int submodel = -1;
|
|
|
|
switch (devc->sbmo.esstype) {
|
|
case ESSTYPE_DETECT:
|
|
case ESSTYPE_LIKE20:
|
|
break;
|
|
case 688:
|
|
submodel = 0x00;
|
|
break;
|
|
case 1688:
|
|
submodel = 0x08;
|
|
break;
|
|
case 1868:
|
|
submodel = SUBMDL_ES1868;
|
|
break;
|
|
case 1869:
|
|
submodel = SUBMDL_ES1869;
|
|
break;
|
|
case 1788:
|
|
submodel = SUBMDL_ES1788;
|
|
break;
|
|
case 1878:
|
|
submodel = SUBMDL_ES1878;
|
|
break;
|
|
case 1879:
|
|
submodel = SUBMDL_ES1879;
|
|
break;
|
|
case 1887:
|
|
submodel = SUBMDL_ES1887;
|
|
break;
|
|
case 1888:
|
|
submodel = SUBMDL_ES1888;
|
|
break;
|
|
default:
|
|
printk (KERN_ERR "Invalid esstype=%d specified\n", devc->sbmo.esstype);
|
|
return 0;
|
|
};
|
|
if (submodel != -1) {
|
|
devc->submodel = submodel;
|
|
sprintf (modelname, "ES%d", devc->sbmo.esstype);
|
|
chip = modelname;
|
|
};
|
|
if (chip == NULL && (ess_minor & 0x0f) < 8) {
|
|
chip = "ES688";
|
|
};
|
|
#ifdef FKS_TEST
|
|
FKS_test (devc);
|
|
#endif
|
|
/*
|
|
* If Nothing detected yet, and we want 2.0 behaviour...
|
|
* Then let's assume it's ES1688.
|
|
*/
|
|
if (chip == NULL && devc->sbmo.esstype == ESSTYPE_LIKE20) {
|
|
chip = "ES1688";
|
|
};
|
|
|
|
if (chip == NULL) {
|
|
int type;
|
|
|
|
type = ess_identify (devc);
|
|
|
|
switch (type) {
|
|
case 0x1868:
|
|
chip = "ES1868";
|
|
devc->submodel = SUBMDL_ES1868;
|
|
break;
|
|
case 0x1869:
|
|
chip = "ES1869";
|
|
devc->submodel = SUBMDL_ES1869;
|
|
break;
|
|
case 0x1878:
|
|
chip = "ES1878";
|
|
devc->submodel = SUBMDL_ES1878;
|
|
break;
|
|
case 0x1879:
|
|
chip = "ES1879";
|
|
devc->submodel = SUBMDL_ES1879;
|
|
break;
|
|
default:
|
|
if ((type & 0x00ff) != ((type >> 8) & 0x00ff)) {
|
|
printk ("ess_init: Unrecognized %04x\n", type);
|
|
}
|
|
};
|
|
};
|
|
#if 0
|
|
/*
|
|
* this one failed:
|
|
* the probing of bit 4 is another thought: from ES1788 and up, all
|
|
* chips seem to have hardware volume control. Bit 4 is readonly to
|
|
* check if a hardware volume interrupt has fired.
|
|
* Cause ES688/ES1688 don't have this feature, bit 4 might be writeable
|
|
* for these chips.
|
|
*/
|
|
if (chip == NULL && !ess_probe(devc, 0x64, (1 << 4))) {
|
|
#endif
|
|
/*
|
|
* the probing of bit 2 is my idea. The ES1887 docs want me to probe
|
|
* bit 3. This results in ES1688 being detected as ES1788.
|
|
* Bit 2 is for "Enable HWV IRQE", but as ES(1)688 chips don't have
|
|
* HardWare Volume, I think they don't have this IRQE.
|
|
*/
|
|
if (chip == NULL && ess_probe(devc, 0x64, (1 << 2))) {
|
|
if (ess_probe (devc, 0x70, 0x7f)) {
|
|
if (ess_probe (devc, 0x64, (1 << 5))) {
|
|
chip = "ES1887";
|
|
devc->submodel = SUBMDL_ES1887;
|
|
} else {
|
|
chip = "ES1888";
|
|
devc->submodel = SUBMDL_ES1888;
|
|
}
|
|
} else {
|
|
chip = "ES1788";
|
|
devc->submodel = SUBMDL_ES1788;
|
|
}
|
|
};
|
|
if (chip == NULL) {
|
|
chip = "ES1688";
|
|
};
|
|
|
|
printk ( KERN_INFO "ESS chip %s %s%s\n"
|
|
, chip
|
|
, ( devc->sbmo.esstype == ESSTYPE_DETECT || devc->sbmo.esstype == ESSTYPE_LIKE20
|
|
? "detected"
|
|
: "specified"
|
|
)
|
|
, ( devc->sbmo.esstype == ESSTYPE_LIKE20
|
|
? " (kernel 2.0 compatible)"
|
|
: ""
|
|
)
|
|
);
|
|
|
|
sprintf(name,"ESS %s AudioDrive (rev %d)", chip, ess_minor & 0x0f);
|
|
} else {
|
|
strcpy(name, "Jazz16");
|
|
}
|
|
|
|
/* AAS: info stolen from ALSA: these boards have different clocks */
|
|
switch(devc->submodel) {
|
|
/* APPARENTLY NOT 1869 AND 1887
|
|
case SUBMDL_ES1869:
|
|
case SUBMDL_ES1887:
|
|
*/
|
|
case SUBMDL_ES1888:
|
|
devc->caps |= SB_CAP_ES18XX_RATE;
|
|
break;
|
|
}
|
|
|
|
hw_config->name = name;
|
|
/* FKS: sb_dsp_reset to enable extended mode???? */
|
|
sb_dsp_reset(devc); /* Turn on extended mode */
|
|
|
|
/*
|
|
* Enable joystick and OPL3
|
|
*/
|
|
cfg = ess_getmixer (devc, 0x40);
|
|
ess_setmixer (devc, 0x40, cfg | 0x03);
|
|
if (devc->submodel >= 8) { /* ES1688 */
|
|
devc->caps |= SB_NO_MIDI; /* ES1688 uses MPU401 MIDI mode */
|
|
}
|
|
sb_dsp_reset (devc);
|
|
|
|
/*
|
|
* This is important! If it's not done, the IRQ probe in sb_dsp_init
|
|
* may fail.
|
|
*/
|
|
return ess_set_irq_hw (devc);
|
|
}
|
|
|
|
static int ess_set_dma_hw(sb_devc * devc)
|
|
{
|
|
unsigned char cfg, dma_bits = 0, dma16_bits;
|
|
int dma;
|
|
|
|
#ifdef FKS_LOGGING
|
|
printk(KERN_INFO "ess_set_dma_hw: dma8=%d,dma16=%d,dup=%d\n"
|
|
, devc->dma8, devc->dma16, devc->duplex);
|
|
#endif
|
|
|
|
/*
|
|
* FKS: It seems as if this duplex flag isn't set yet. Check it.
|
|
*/
|
|
dma = devc->dma8;
|
|
|
|
if (dma > 3 || dma < 0 || dma == 2) {
|
|
dma_bits = 0;
|
|
printk(KERN_ERR "ESS1688: Invalid DMA8 %d\n", dma);
|
|
return 0;
|
|
} else {
|
|
/* Extended mode DMA enable */
|
|
cfg = 0x50;
|
|
|
|
if (dma == 3) {
|
|
dma_bits = 3;
|
|
} else {
|
|
dma_bits = dma + 1;
|
|
}
|
|
}
|
|
|
|
if (!ess_write (devc, 0xb2, cfg | (dma_bits << 2))) {
|
|
printk(KERN_ERR "ESS1688: Failed to write to DMA config register\n");
|
|
return 0;
|
|
}
|
|
|
|
if (devc->duplex) {
|
|
dma = devc->dma16;
|
|
dma16_bits = 0;
|
|
|
|
if (dma >= 0) {
|
|
switch (dma) {
|
|
case 0:
|
|
dma_bits = 0x04;
|
|
break;
|
|
case 1:
|
|
dma_bits = 0x05;
|
|
break;
|
|
case 3:
|
|
dma_bits = 0x06;
|
|
break;
|
|
case 5:
|
|
dma_bits = 0x07;
|
|
dma16_bits = 0x20;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "ESS1887: Invalid DMA16 %d\n", dma);
|
|
return 0;
|
|
};
|
|
ess_chgmixer (devc, 0x78, 0x20, dma16_bits);
|
|
ess_chgmixer (devc, 0x7d, 0x07, dma_bits);
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* This one is called from sb_dsp_init.
|
|
*
|
|
* Return values:
|
|
* 0: Failed
|
|
* 1: Succeeded or doesn't apply (not SUBMDL_ES1887)
|
|
*/
|
|
int ess_dsp_init (sb_devc *devc, struct address_info *hw_config)
|
|
{
|
|
/*
|
|
* Caller also checks this, but anyway
|
|
*/
|
|
if (devc->model != MDL_ESS) {
|
|
printk (KERN_INFO "ess_dsp_init for non ESS chip\n");
|
|
return 1;
|
|
}
|
|
/*
|
|
* This for ES1887 to run Full Duplex. Actually ES1888
|
|
* is allowed to do so too. I have no idea yet if this
|
|
* will work for ES1888 however.
|
|
*
|
|
* For SB16 having both dma8 and dma16 means enable
|
|
* Full Duplex. Let's try this for ES1887 too
|
|
*
|
|
*/
|
|
if (devc->submodel == SUBMDL_ES1887) {
|
|
if (hw_config->dma2 != -1) {
|
|
devc->dma16 = hw_config->dma2;
|
|
}
|
|
/*
|
|
* devc->duplex initialization is put here, cause
|
|
* ess_set_dma_hw needs it.
|
|
*/
|
|
if (devc->dma8 != devc->dma16 && devc->dma16 != -1) {
|
|
devc->duplex = 1;
|
|
}
|
|
}
|
|
if (!ess_set_dma_hw (devc)) {
|
|
free_irq(devc->irq, devc);
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/****************************************************************************
|
|
* *
|
|
* ESS mixer *
|
|
* *
|
|
****************************************************************************/
|
|
|
|
#define ES688_RECORDING_DEVICES \
|
|
( SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD )
|
|
#define ES688_MIXER_DEVICES \
|
|
( SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_LINE \
|
|
| SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_VOLUME \
|
|
| SOUND_MASK_LINE2 | SOUND_MASK_SPEAKER )
|
|
|
|
#define ES1688_RECORDING_DEVICES \
|
|
( ES688_RECORDING_DEVICES )
|
|
#define ES1688_MIXER_DEVICES \
|
|
( ES688_MIXER_DEVICES | SOUND_MASK_RECLEV )
|
|
|
|
#define ES1887_RECORDING_DEVICES \
|
|
( ES1688_RECORDING_DEVICES | SOUND_MASK_LINE2 | SOUND_MASK_SYNTH)
|
|
#define ES1887_MIXER_DEVICES \
|
|
( ES1688_MIXER_DEVICES )
|
|
|
|
/*
|
|
* Mixer registers of ES1887
|
|
*
|
|
* These registers specifically take care of recording levels. To make the
|
|
* mapping from playback devices to recording devices every recording
|
|
* devices = playback device + ES_REC_MIXER_RECDIFF
|
|
*/
|
|
#define ES_REC_MIXER_RECBASE (SOUND_MIXER_LINE3 + 1)
|
|
#define ES_REC_MIXER_RECDIFF (ES_REC_MIXER_RECBASE - SOUND_MIXER_SYNTH)
|
|
|
|
#define ES_REC_MIXER_RECSYNTH (SOUND_MIXER_SYNTH + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECPCM (SOUND_MIXER_PCM + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECSPEAKER (SOUND_MIXER_SPEAKER + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECLINE (SOUND_MIXER_LINE + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECMIC (SOUND_MIXER_MIC + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECCD (SOUND_MIXER_CD + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECIMIX (SOUND_MIXER_IMIX + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECALTPCM (SOUND_MIXER_ALTPCM + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECRECLEV (SOUND_MIXER_RECLEV + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECIGAIN (SOUND_MIXER_IGAIN + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECOGAIN (SOUND_MIXER_OGAIN + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECLINE1 (SOUND_MIXER_LINE1 + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECLINE2 (SOUND_MIXER_LINE2 + ES_REC_MIXER_RECDIFF)
|
|
#define ES_REC_MIXER_RECLINE3 (SOUND_MIXER_LINE3 + ES_REC_MIXER_RECDIFF)
|
|
|
|
static mixer_tab es688_mix = {
|
|
MIX_ENT(SOUND_MIXER_VOLUME, 0x32, 7, 4, 0x32, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_RECLEV, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0)
|
|
};
|
|
|
|
/*
|
|
* The ES1688 specifics... hopefully correct...
|
|
* - 6 bit master volume
|
|
* I was wrong, ES1888 docs say ES1688 didn't have it.
|
|
* - RECLEV control
|
|
* These may apply to ES688 too. I have no idea.
|
|
*/
|
|
static mixer_tab es1688_mix = {
|
|
MIX_ENT(SOUND_MIXER_VOLUME, 0x32, 7, 4, 0x32, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0)
|
|
};
|
|
|
|
static mixer_tab es1688later_mix = {
|
|
MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6),
|
|
MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0)
|
|
};
|
|
|
|
/*
|
|
* This one is for all ESS chips with a record mixer.
|
|
* It's not used (yet) however
|
|
*/
|
|
static mixer_tab es_rec_mix = {
|
|
MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6),
|
|
MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECSYNTH, 0x6b, 7, 4, 0x6b, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECSPEAKER, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE, 0x6e, 7, 4, 0x6e, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECMIC, 0x68, 7, 4, 0x68, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECCD, 0x6a, 7, 4, 0x6a, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECIMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECRECLEV, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECIGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECOGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE2, 0x6c, 7, 4, 0x6c, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE3, 0x00, 0, 0, 0x00, 0, 0)
|
|
};
|
|
|
|
/*
|
|
* This one is for ES1887. It's little different from es_rec_mix: it
|
|
* has 0x7c for PCM playback level. This is because ES1887 uses
|
|
* Audio 2 for playback.
|
|
*/
|
|
static mixer_tab es1887_mix = {
|
|
MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6),
|
|
MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_PCM, 0x7c, 7, 4, 0x7c, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4),
|
|
MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECSYNTH, 0x6b, 7, 4, 0x6b, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECSPEAKER, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE, 0x6e, 7, 4, 0x6e, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECMIC, 0x68, 7, 4, 0x68, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECCD, 0x6a, 7, 4, 0x6a, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECIMIX, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECALTPCM, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECRECLEV, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECIGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECOGAIN, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE1, 0x00, 0, 0, 0x00, 0, 0),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE2, 0x6c, 7, 4, 0x6c, 3, 4),
|
|
MIX_ENT(ES_REC_MIXER_RECLINE3, 0x00, 0, 0, 0x00, 0, 0)
|
|
};
|
|
|
|
static int ess_has_rec_mixer (int submodel)
|
|
{
|
|
switch (submodel) {
|
|
case SUBMDL_ES1887:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
};
|
|
};
|
|
|
|
#ifdef FKS_LOGGING
|
|
static int ess_mixer_mon_regs[]
|
|
= { 0x70, 0x71, 0x72, 0x74, 0x76, 0x78, 0x7a, 0x7c, 0x7d, 0x7f
|
|
, 0xa1, 0xa2, 0xa4, 0xa5, 0xa8, 0xa9
|
|
, 0xb1, 0xb2, 0xb4, 0xb5, 0xb6, 0xb7, 0xb9
|
|
, 0x00};
|
|
|
|
static void ess_show_mixerregs (sb_devc *devc)
|
|
{
|
|
int *mp = ess_mixer_mon_regs;
|
|
|
|
return;
|
|
|
|
while (*mp != 0) {
|
|
printk (KERN_INFO "res (%x)=%x\n", *mp, (int)(ess_getmixer (devc, *mp)));
|
|
mp++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void ess_setmixer (sb_devc * devc, unsigned int port, unsigned int value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
#ifdef FKS_LOGGING
|
|
printk(KERN_INFO "FKS: write mixer %x: %x\n", port, value);
|
|
#endif
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
if (port >= 0xa0) {
|
|
ess_write (devc, port, value);
|
|
} else {
|
|
outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
|
|
|
|
udelay(20);
|
|
outb(((unsigned char) (value & 0xff)), MIXER_DATA);
|
|
udelay(20);
|
|
};
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
}
|
|
|
|
unsigned int ess_getmixer (sb_devc * devc, unsigned int port)
|
|
{
|
|
unsigned int val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
|
|
if (port >= 0xa0) {
|
|
val = ess_read (devc, port);
|
|
} else {
|
|
outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
|
|
|
|
udelay(20);
|
|
val = inb(MIXER_DATA);
|
|
udelay(20);
|
|
}
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void ess_chgmixer
|
|
(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
|
|
{
|
|
int value;
|
|
|
|
value = ess_getmixer (devc, reg);
|
|
value = (value & ~mask) | (val & mask);
|
|
ess_setmixer (devc, reg, value);
|
|
}
|
|
|
|
/*
|
|
* ess_mixer_init must be called from sb_mixer_init
|
|
*/
|
|
void ess_mixer_init (sb_devc * devc)
|
|
{
|
|
devc->mixer_caps = SOUND_CAP_EXCL_INPUT;
|
|
|
|
/*
|
|
* Take care of ES1887 specifics...
|
|
*/
|
|
switch (devc->submodel) {
|
|
case SUBMDL_ES1887:
|
|
devc->supported_devices = ES1887_MIXER_DEVICES;
|
|
devc->supported_rec_devices = ES1887_RECORDING_DEVICES;
|
|
#ifdef FKS_LOGGING
|
|
printk (KERN_INFO "FKS: ess_mixer_init dup = %d\n", devc->duplex);
|
|
#endif
|
|
if (devc->duplex) {
|
|
devc->iomap = &es1887_mix;
|
|
devc->iomap_sz = ARRAY_SIZE(es1887_mix);
|
|
} else {
|
|
devc->iomap = &es_rec_mix;
|
|
devc->iomap_sz = ARRAY_SIZE(es_rec_mix);
|
|
}
|
|
break;
|
|
default:
|
|
if (devc->submodel < 8) {
|
|
devc->supported_devices = ES688_MIXER_DEVICES;
|
|
devc->supported_rec_devices = ES688_RECORDING_DEVICES;
|
|
devc->iomap = &es688_mix;
|
|
devc->iomap_sz = ARRAY_SIZE(es688_mix);
|
|
} else {
|
|
/*
|
|
* es1688 has 4 bits master vol.
|
|
* later chips have 6 bits (?)
|
|
*/
|
|
devc->supported_devices = ES1688_MIXER_DEVICES;
|
|
devc->supported_rec_devices = ES1688_RECORDING_DEVICES;
|
|
if (devc->submodel < 0x10) {
|
|
devc->iomap = &es1688_mix;
|
|
devc->iomap_sz = ARRAY_SIZE(es688_mix);
|
|
} else {
|
|
devc->iomap = &es1688later_mix;
|
|
devc->iomap_sz = ARRAY_SIZE(es1688later_mix);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Changing playback levels at an ESS chip with record mixer means having to
|
|
* take care of recording levels of recorded inputs (devc->recmask) too!
|
|
*/
|
|
int ess_mixer_set(sb_devc *devc, int dev, int left, int right)
|
|
{
|
|
if (ess_has_rec_mixer (devc->submodel) && (devc->recmask & (1 << dev))) {
|
|
sb_common_mixer_set (devc, dev + ES_REC_MIXER_RECDIFF, left, right);
|
|
}
|
|
return sb_common_mixer_set (devc, dev, left, right);
|
|
}
|
|
|
|
/*
|
|
* After a sb_dsp_reset extended register 0xb4 (RECLEV) is reset too. After
|
|
* sb_dsp_reset RECLEV has to be restored. This is where ess_mixer_reload
|
|
* helps.
|
|
*/
|
|
void ess_mixer_reload (sb_devc *devc, int dev)
|
|
{
|
|
int left, right, value;
|
|
|
|
value = devc->levels[dev];
|
|
left = value & 0x000000ff;
|
|
right = (value & 0x0000ff00) >> 8;
|
|
|
|
sb_common_mixer_set(devc, dev, left, right);
|
|
}
|
|
|
|
static int es_rec_set_recmask(sb_devc * devc, int mask)
|
|
{
|
|
int i, i_mask, cur_mask, diff_mask;
|
|
int value, left, right;
|
|
|
|
#ifdef FKS_LOGGING
|
|
printk (KERN_INFO "FKS: es_rec_set_recmask mask = %x\n", mask);
|
|
#endif
|
|
/*
|
|
* Changing the recmask on an ESS chip with recording mixer means:
|
|
* (1) Find the differences
|
|
* (2) For "turned-on" inputs: make the recording level the playback level
|
|
* (3) For "turned-off" inputs: make the recording level zero
|
|
*/
|
|
cur_mask = devc->recmask;
|
|
diff_mask = (cur_mask ^ mask);
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
i_mask = (1 << i);
|
|
if (diff_mask & i_mask) { /* Difference? (1) */
|
|
if (mask & i_mask) { /* Turn it on (2) */
|
|
value = devc->levels[i];
|
|
left = value & 0x000000ff;
|
|
right = (value & 0x0000ff00) >> 8;
|
|
} else { /* Turn it off (3) */
|
|
left = 0;
|
|
left = 0;
|
|
right = 0;
|
|
}
|
|
sb_common_mixer_set(devc, i + ES_REC_MIXER_RECDIFF, left, right);
|
|
}
|
|
}
|
|
return mask;
|
|
}
|
|
|
|
int ess_set_recmask(sb_devc * devc, int *mask)
|
|
{
|
|
/* This applies to ESS chips with record mixers only! */
|
|
|
|
if (ess_has_rec_mixer (devc->submodel)) {
|
|
*mask = es_rec_set_recmask (devc, *mask);
|
|
return 1; /* Applied */
|
|
} else {
|
|
return 0; /* Not applied */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ess_mixer_reset must be called from sb_mixer_reset
|
|
*/
|
|
int ess_mixer_reset (sb_devc * devc)
|
|
{
|
|
/*
|
|
* Separate actions for ESS chips with a record mixer:
|
|
*/
|
|
if (ess_has_rec_mixer (devc->submodel)) {
|
|
switch (devc->submodel) {
|
|
case SUBMDL_ES1887:
|
|
/*
|
|
* Separate actions for ES1887:
|
|
* Change registers 7a and 1c to make the record mixer the
|
|
* actual recording source.
|
|
*/
|
|
ess_chgmixer(devc, 0x7a, 0x18, 0x08);
|
|
ess_chgmixer(devc, 0x1c, 0x07, 0x07);
|
|
break;
|
|
};
|
|
/*
|
|
* Call set_recmask for proper initialization
|
|
*/
|
|
devc->recmask = devc->supported_rec_devices;
|
|
es_rec_set_recmask(devc, 0);
|
|
devc->recmask = 0;
|
|
|
|
return 1; /* We took care of recmask. */
|
|
} else {
|
|
return 0; /* We didn't take care; caller do it */
|
|
}
|
|
}
|
|
|
|
/****************************************************************************
|
|
* *
|
|
* ESS midi *
|
|
* *
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* FKS: IRQ may be shared. Hm. And if so? Then What?
|
|
*/
|
|
int ess_midi_init(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
unsigned char cfg, tmp;
|
|
|
|
cfg = ess_getmixer (devc, 0x40) & 0x03;
|
|
|
|
if (devc->submodel < 8) {
|
|
ess_setmixer (devc, 0x40, cfg | 0x03); /* Enable OPL3 & joystick */
|
|
return 0; /* ES688 doesn't support MPU401 mode */
|
|
}
|
|
tmp = (hw_config->io_base & 0x0f0) >> 4;
|
|
|
|
if (tmp > 3) {
|
|
ess_setmixer (devc, 0x40, cfg);
|
|
return 0;
|
|
}
|
|
cfg |= tmp << 3;
|
|
|
|
tmp = 1; /* MPU enabled without interrupts */
|
|
|
|
/* May be shared: if so the value is -ve */
|
|
|
|
switch (abs(hw_config->irq)) {
|
|
case 9:
|
|
tmp = 0x4;
|
|
break;
|
|
case 5:
|
|
tmp = 0x5;
|
|
break;
|
|
case 7:
|
|
tmp = 0x6;
|
|
break;
|
|
case 10:
|
|
tmp = 0x7;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
cfg |= tmp << 5;
|
|
ess_setmixer (devc, 0x40, cfg | 0x03);
|
|
|
|
return 1;
|
|
}
|
|
|