redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/net/dsa/mv88e6xxx.h
Patrick Uiterwijk 13a7ebb38a net: dsa: mv88e6xxx: Clear the PDOWN bit on setup 
Some of the vendor-specific bootloaders set up this part
of the initialization for us, so this was never added.
However, since upstream bootloaders don't initialize the
chip specifically, they leave the fiber MII's PDOWN flag
set, which means that the CPU port doesn't connect.

This patch checks whether this flag has been clear prior
by something else, and if not make us clear it.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31 15:12:57 -04:00

556 lines
21 KiB
C
Raw Blame History

/*
* net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support
* Copyright (c) 2008 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MV88E6XXX_H
#define __MV88E6XXX_H
#include <linux/if_vlan.h>
#ifndef UINT64_MAX
#define UINT64_MAX (u64)(~((u64)0))
#endif
#define SMI_CMD 0x00
#define SMI_CMD_BUSY BIT(15)
#define SMI_CMD_CLAUSE_22 BIT(12)
#define SMI_CMD_OP_22_WRITE ((1 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
#define SMI_CMD_OP_22_READ ((2 << 10) | SMI_CMD_BUSY | SMI_CMD_CLAUSE_22)
#define SMI_CMD_OP_45_WRITE_ADDR ((0 << 10) | SMI_CMD_BUSY)
#define SMI_CMD_OP_45_WRITE_DATA ((1 << 10) | SMI_CMD_BUSY)
#define SMI_CMD_OP_45_READ_DATA ((2 << 10) | SMI_CMD_BUSY)
#define SMI_CMD_OP_45_READ_DATA_INC ((3 << 10) | SMI_CMD_BUSY)
#define SMI_DATA 0x01
/* Fiber/SERDES Registers are located at SMI address F, page 1 */
#define REG_FIBER_SERDES 0x0f
#define PAGE_FIBER_SERDES 0x01
#define REG_PORT(p) (0x10 + (p))
#define PORT_STATUS 0x00
#define PORT_STATUS_PAUSE_EN BIT(15)
#define PORT_STATUS_MY_PAUSE BIT(14)
#define PORT_STATUS_HD_FLOW BIT(13)
#define PORT_STATUS_PHY_DETECT BIT(12)
#define PORT_STATUS_LINK BIT(11)
#define PORT_STATUS_DUPLEX BIT(10)
#define PORT_STATUS_SPEED_MASK 0x0300
#define PORT_STATUS_SPEED_10 0x0000
#define PORT_STATUS_SPEED_100 0x0100
#define PORT_STATUS_SPEED_1000 0x0200
#define PORT_STATUS_EEE BIT(6) /* 6352 */
#define PORT_STATUS_AM_DIS BIT(6) /* 6165 */
#define PORT_STATUS_MGMII BIT(6) /* 6185 */
#define PORT_STATUS_TX_PAUSED BIT(5)
#define PORT_STATUS_FLOW_CTRL BIT(4)
#define PORT_STATUS_CMODE_MASK 0x0f
#define PORT_STATUS_CMODE_100BASE_X 0x8
#define PORT_STATUS_CMODE_1000BASE_X 0x9
#define PORT_STATUS_CMODE_SGMII 0xa
#define PORT_PCS_CTRL 0x01
#define PORT_PCS_CTRL_RGMII_DELAY_RXCLK BIT(15)
#define PORT_PCS_CTRL_RGMII_DELAY_TXCLK BIT(14)
#define PORT_PCS_CTRL_FC BIT(7)
#define PORT_PCS_CTRL_FORCE_FC BIT(6)
#define PORT_PCS_CTRL_LINK_UP BIT(5)
#define PORT_PCS_CTRL_FORCE_LINK BIT(4)
#define PORT_PCS_CTRL_DUPLEX_FULL BIT(3)
#define PORT_PCS_CTRL_FORCE_DUPLEX BIT(2)
#define PORT_PCS_CTRL_10 0x00
#define PORT_PCS_CTRL_100 0x01
#define PORT_PCS_CTRL_1000 0x02
#define PORT_PCS_CTRL_UNFORCED 0x03
#define PORT_PAUSE_CTRL 0x02
#define PORT_SWITCH_ID 0x03
#define PORT_SWITCH_ID_PROD_NUM_MASK 0xfff0
#define PORT_SWITCH_ID_REV_MASK 0x000f
#define PORT_SWITCH_ID_6031 0x0310
#define PORT_SWITCH_ID_6035 0x0350
#define PORT_SWITCH_ID_6046 0x0480
#define PORT_SWITCH_ID_6061 0x0610
#define PORT_SWITCH_ID_6065 0x0650
#define PORT_SWITCH_ID_6085 0x04a0
#define PORT_SWITCH_ID_6092 0x0970
#define PORT_SWITCH_ID_6095 0x0950
#define PORT_SWITCH_ID_6096 0x0980
#define PORT_SWITCH_ID_6097 0x0990
#define PORT_SWITCH_ID_6108 0x1070
#define PORT_SWITCH_ID_6121 0x1040
#define PORT_SWITCH_ID_6122 0x1050
#define PORT_SWITCH_ID_6123 0x1210
#define PORT_SWITCH_ID_6123_A1 0x1212
#define PORT_SWITCH_ID_6123_A2 0x1213
#define PORT_SWITCH_ID_6131 0x1060
#define PORT_SWITCH_ID_6131_B2 0x1066
#define PORT_SWITCH_ID_6152 0x1a40
#define PORT_SWITCH_ID_6155 0x1a50
#define PORT_SWITCH_ID_6161 0x1610
#define PORT_SWITCH_ID_6161_A1 0x1612
#define PORT_SWITCH_ID_6161_A2 0x1613
#define PORT_SWITCH_ID_6165 0x1650
#define PORT_SWITCH_ID_6165_A1 0x1652
#define PORT_SWITCH_ID_6165_A2 0x1653
#define PORT_SWITCH_ID_6171 0x1710
#define PORT_SWITCH_ID_6172 0x1720
#define PORT_SWITCH_ID_6175 0x1750
#define PORT_SWITCH_ID_6176 0x1760
#define PORT_SWITCH_ID_6182 0x1a60
#define PORT_SWITCH_ID_6185 0x1a70
#define PORT_SWITCH_ID_6240 0x2400
#define PORT_SWITCH_ID_6320 0x1150
#define PORT_SWITCH_ID_6320_A1 0x1151
#define PORT_SWITCH_ID_6320_A2 0x1152
#define PORT_SWITCH_ID_6321 0x3100
#define PORT_SWITCH_ID_6321_A1 0x3101
#define PORT_SWITCH_ID_6321_A2 0x3102
#define PORT_SWITCH_ID_6350 0x3710
#define PORT_SWITCH_ID_6351 0x3750
#define PORT_SWITCH_ID_6352 0x3520
#define PORT_SWITCH_ID_6352_A0 0x3521
#define PORT_SWITCH_ID_6352_A1 0x3522
#define PORT_CONTROL 0x04
#define PORT_CONTROL_USE_CORE_TAG BIT(15)
#define PORT_CONTROL_DROP_ON_LOCK BIT(14)
#define PORT_CONTROL_EGRESS_UNMODIFIED (0x0 << 12)
#define PORT_CONTROL_EGRESS_UNTAGGED (0x1 << 12)
#define PORT_CONTROL_EGRESS_TAGGED (0x2 << 12)
#define PORT_CONTROL_EGRESS_ADD_TAG (0x3 << 12)
#define PORT_CONTROL_HEADER BIT(11)
#define PORT_CONTROL_IGMP_MLD_SNOOP BIT(10)
#define PORT_CONTROL_DOUBLE_TAG BIT(9)
#define PORT_CONTROL_FRAME_MODE_NORMAL (0x0 << 8)
#define PORT_CONTROL_FRAME_MODE_DSA (0x1 << 8)
#define PORT_CONTROL_FRAME_MODE_PROVIDER (0x2 << 8)
#define PORT_CONTROL_FRAME_ETHER_TYPE_DSA (0x3 << 8)
#define PORT_CONTROL_DSA_TAG BIT(8)
#define PORT_CONTROL_VLAN_TUNNEL BIT(7)
#define PORT_CONTROL_TAG_IF_BOTH BIT(6)
#define PORT_CONTROL_USE_IP BIT(5)
#define PORT_CONTROL_USE_TAG BIT(4)
#define PORT_CONTROL_FORWARD_UNKNOWN_MC BIT(3)
#define PORT_CONTROL_FORWARD_UNKNOWN BIT(2)
#define PORT_CONTROL_STATE_MASK 0x03
#define PORT_CONTROL_STATE_DISABLED 0x00
#define PORT_CONTROL_STATE_BLOCKING 0x01
#define PORT_CONTROL_STATE_LEARNING 0x02
#define PORT_CONTROL_STATE_FORWARDING 0x03
#define PORT_CONTROL_1 0x05
#define PORT_CONTROL_1_FID_11_4_MASK (0xff << 0)
#define PORT_BASE_VLAN 0x06
#define PORT_BASE_VLAN_FID_3_0_MASK (0xf << 12)
#define PORT_DEFAULT_VLAN 0x07
#define PORT_DEFAULT_VLAN_MASK 0xfff
#define PORT_CONTROL_2 0x08
#define PORT_CONTROL_2_IGNORE_FCS BIT(15)
#define PORT_CONTROL_2_VTU_PRI_OVERRIDE BIT(14)
#define PORT_CONTROL_2_SA_PRIO_OVERRIDE BIT(13)
#define PORT_CONTROL_2_DA_PRIO_OVERRIDE BIT(12)
#define PORT_CONTROL_2_JUMBO_1522 (0x00 << 12)
#define PORT_CONTROL_2_JUMBO_2048 (0x01 << 12)
#define PORT_CONTROL_2_JUMBO_10240 (0x02 << 12)
#define PORT_CONTROL_2_8021Q_MASK (0x03 << 10)
#define PORT_CONTROL_2_8021Q_DISABLED (0x00 << 10)
#define PORT_CONTROL_2_8021Q_FALLBACK (0x01 << 10)
#define PORT_CONTROL_2_8021Q_CHECK (0x02 << 10)
#define PORT_CONTROL_2_8021Q_SECURE (0x03 << 10)
#define PORT_CONTROL_2_DISCARD_TAGGED BIT(9)
#define PORT_CONTROL_2_DISCARD_UNTAGGED BIT(8)
#define PORT_CONTROL_2_MAP_DA BIT(7)
#define PORT_CONTROL_2_DEFAULT_FORWARD BIT(6)
#define PORT_CONTROL_2_FORWARD_UNKNOWN BIT(6)
#define PORT_CONTROL_2_EGRESS_MONITOR BIT(5)
#define PORT_CONTROL_2_INGRESS_MONITOR BIT(4)
#define PORT_RATE_CONTROL 0x09
#define PORT_RATE_CONTROL_2 0x0a
#define PORT_ASSOC_VECTOR 0x0b
#define PORT_ASSOC_VECTOR_HOLD_AT_1 BIT(15)
#define PORT_ASSOC_VECTOR_INT_AGE_OUT BIT(14)
#define PORT_ASSOC_VECTOR_LOCKED_PORT BIT(13)
#define PORT_ASSOC_VECTOR_IGNORE_WRONG BIT(12)
#define PORT_ASSOC_VECTOR_REFRESH_LOCKED BIT(11)
#define PORT_ATU_CONTROL 0x0c
#define PORT_PRI_OVERRIDE 0x0d
#define PORT_ETH_TYPE 0x0f
#define PORT_IN_DISCARD_LO 0x10
#define PORT_IN_DISCARD_HI 0x11
#define PORT_IN_FILTERED 0x12
#define PORT_OUT_FILTERED 0x13
#define PORT_TAG_REGMAP_0123 0x18
#define PORT_TAG_REGMAP_4567 0x19
#define REG_GLOBAL 0x1b
#define GLOBAL_STATUS 0x00
#define GLOBAL_STATUS_PPU_STATE BIT(15) /* 6351 and 6171 */
/* Two bits for 6165, 6185 etc */
#define GLOBAL_STATUS_PPU_MASK (0x3 << 14)
#define GLOBAL_STATUS_PPU_DISABLED_RST (0x0 << 14)
#define GLOBAL_STATUS_PPU_INITIALIZING (0x1 << 14)
#define GLOBAL_STATUS_PPU_DISABLED (0x2 << 14)
#define GLOBAL_STATUS_PPU_POLLING (0x3 << 14)
#define GLOBAL_MAC_01 0x01
#define GLOBAL_MAC_23 0x02
#define GLOBAL_MAC_45 0x03
#define GLOBAL_ATU_FID 0x01 /* 6097 6165 6351 6352 */
#define GLOBAL_VTU_FID 0x02 /* 6097 6165 6351 6352 */
#define GLOBAL_VTU_FID_MASK 0xfff
#define GLOBAL_VTU_SID 0x03 /* 6097 6165 6351 6352 */
#define GLOBAL_VTU_SID_MASK 0x3f
#define GLOBAL_CONTROL 0x04
#define GLOBAL_CONTROL_SW_RESET BIT(15)
#define GLOBAL_CONTROL_PPU_ENABLE BIT(14)
#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13) /* 6352 */
#define GLOBAL_CONTROL_SCHED_PRIO BIT(11) /* 6152 */
#define GLOBAL_CONTROL_MAX_FRAME_1632 BIT(10) /* 6152 */
#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9) /* 6152 */
#define GLOBAL_CONTROL_DEVICE_EN BIT(7)
#define GLOBAL_CONTROL_STATS_DONE_EN BIT(6)
#define GLOBAL_CONTROL_VTU_PROBLEM_EN BIT(5)
#define GLOBAL_CONTROL_VTU_DONE_EN BIT(4)
#define GLOBAL_CONTROL_ATU_PROBLEM_EN BIT(3)
#define GLOBAL_CONTROL_ATU_DONE_EN BIT(2)
#define GLOBAL_CONTROL_TCAM_EN BIT(1)
#define GLOBAL_CONTROL_EEPROM_DONE_EN BIT(0)
#define GLOBAL_VTU_OP 0x05
#define GLOBAL_VTU_OP_BUSY BIT(15)
#define GLOBAL_VTU_OP_FLUSH_ALL ((0x01 << 12) | GLOBAL_VTU_OP_BUSY)
#define GLOBAL_VTU_OP_VTU_LOAD_PURGE ((0x03 << 12) | GLOBAL_VTU_OP_BUSY)
#define GLOBAL_VTU_OP_VTU_GET_NEXT ((0x04 << 12) | GLOBAL_VTU_OP_BUSY)
#define GLOBAL_VTU_OP_STU_LOAD_PURGE ((0x05 << 12) | GLOBAL_VTU_OP_BUSY)
#define GLOBAL_VTU_OP_STU_GET_NEXT ((0x06 << 12) | GLOBAL_VTU_OP_BUSY)
#define GLOBAL_VTU_VID 0x06
#define GLOBAL_VTU_VID_MASK 0xfff
#define GLOBAL_VTU_VID_VALID BIT(12)
#define GLOBAL_VTU_DATA_0_3 0x07
#define GLOBAL_VTU_DATA_4_7 0x08
#define GLOBAL_VTU_DATA_8_11 0x09
#define GLOBAL_VTU_STU_DATA_MASK 0x03
#define GLOBAL_VTU_DATA_MEMBER_TAG_UNMODIFIED 0x00
#define GLOBAL_VTU_DATA_MEMBER_TAG_UNTAGGED 0x01
#define GLOBAL_VTU_DATA_MEMBER_TAG_TAGGED 0x02
#define GLOBAL_VTU_DATA_MEMBER_TAG_NON_MEMBER 0x03
#define GLOBAL_STU_DATA_PORT_STATE_DISABLED 0x00
#define GLOBAL_STU_DATA_PORT_STATE_BLOCKING 0x01
#define GLOBAL_STU_DATA_PORT_STATE_LEARNING 0x02
#define GLOBAL_STU_DATA_PORT_STATE_FORWARDING 0x03
#define GLOBAL_ATU_CONTROL 0x0a
#define GLOBAL_ATU_CONTROL_LEARN2ALL BIT(3)
#define GLOBAL_ATU_OP 0x0b
#define GLOBAL_ATU_OP_BUSY BIT(15)
#define GLOBAL_ATU_OP_NOP (0 << 12)
#define GLOBAL_ATU_OP_FLUSH_MOVE_ALL ((1 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_OP_FLUSH_MOVE_NON_STATIC ((2 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_OP_LOAD_DB ((3 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_OP_GET_NEXT_DB ((4 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_OP_FLUSH_MOVE_ALL_DB ((5 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_OP_FLUSH_MOVE_NON_STATIC_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_OP_GET_CLR_VIOLATION ((7 << 12) | GLOBAL_ATU_OP_BUSY)
#define GLOBAL_ATU_DATA 0x0c
#define GLOBAL_ATU_DATA_TRUNK BIT(15)
#define GLOBAL_ATU_DATA_TRUNK_ID_MASK 0x00f0
#define GLOBAL_ATU_DATA_TRUNK_ID_SHIFT 4
#define GLOBAL_ATU_DATA_PORT_VECTOR_MASK 0x3ff0
#define GLOBAL_ATU_DATA_PORT_VECTOR_SHIFT 4
#define GLOBAL_ATU_DATA_STATE_MASK 0x0f
#define GLOBAL_ATU_DATA_STATE_UNUSED 0x00
#define GLOBAL_ATU_DATA_STATE_UC_MGMT 0x0d
#define GLOBAL_ATU_DATA_STATE_UC_STATIC 0x0e
#define GLOBAL_ATU_DATA_STATE_UC_PRIO_OVER 0x0f
#define GLOBAL_ATU_DATA_STATE_MC_NONE_RATE 0x05
#define GLOBAL_ATU_DATA_STATE_MC_STATIC 0x07
#define GLOBAL_ATU_DATA_STATE_MC_MGMT 0x0e
#define GLOBAL_ATU_DATA_STATE_MC_PRIO_OVER 0x0f
#define GLOBAL_ATU_MAC_01 0x0d
#define GLOBAL_ATU_MAC_23 0x0e
#define GLOBAL_ATU_MAC_45 0x0f
#define GLOBAL_IP_PRI_0 0x10
#define GLOBAL_IP_PRI_1 0x11
#define GLOBAL_IP_PRI_2 0x12
#define GLOBAL_IP_PRI_3 0x13
#define GLOBAL_IP_PRI_4 0x14
#define GLOBAL_IP_PRI_5 0x15
#define GLOBAL_IP_PRI_6 0x16
#define GLOBAL_IP_PRI_7 0x17
#define GLOBAL_IEEE_PRI 0x18
#define GLOBAL_CORE_TAG_TYPE 0x19
#define GLOBAL_MONITOR_CONTROL 0x1a
#define GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT 12
#define GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT 8
#define GLOBAL_MONITOR_CONTROL_ARP_SHIFT 4
#define GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT 0
#define GLOBAL_MONITOR_CONTROL_ARP_DISABLED (0xf0)
#define GLOBAL_CONTROL_2 0x1c
#define GLOBAL_CONTROL_2_NO_CASCADE 0xe000
#define GLOBAL_CONTROL_2_MULTIPLE_CASCADE 0xf000
#define GLOBAL_STATS_OP 0x1d
#define GLOBAL_STATS_OP_BUSY BIT(15)
#define GLOBAL_STATS_OP_NOP (0 << 12)
#define GLOBAL_STATS_OP_FLUSH_ALL ((1 << 12) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_FLUSH_PORT ((2 << 12) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_READ_CAPTURED ((4 << 12) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_CAPTURE_PORT ((5 << 12) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_HIST_RX ((1 << 10) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_HIST_TX ((2 << 10) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_HIST_RX_TX ((3 << 10) | GLOBAL_STATS_OP_BUSY)
#define GLOBAL_STATS_OP_BANK_1 BIT(9)
#define GLOBAL_STATS_COUNTER_32 0x1e
#define GLOBAL_STATS_COUNTER_01 0x1f
#define REG_GLOBAL2 0x1c
#define GLOBAL2_INT_SOURCE 0x00
#define GLOBAL2_INT_MASK 0x01
#define GLOBAL2_MGMT_EN_2X 0x02
#define GLOBAL2_MGMT_EN_0X 0x03
#define GLOBAL2_FLOW_CONTROL 0x04
#define GLOBAL2_SWITCH_MGMT 0x05
#define GLOBAL2_SWITCH_MGMT_USE_DOUBLE_TAG_DATA BIT(15)
#define GLOBAL2_SWITCH_MGMT_PREVENT_LOOPS BIT(14)
#define GLOBAL2_SWITCH_MGMT_FLOW_CONTROL_MSG BIT(13)
#define GLOBAL2_SWITCH_MGMT_FORCE_FLOW_CTRL_PRI BIT(7)
#define GLOBAL2_SWITCH_MGMT_RSVD2CPU BIT(3)
#define GLOBAL2_DEVICE_MAPPING 0x06
#define GLOBAL2_DEVICE_MAPPING_UPDATE BIT(15)
#define GLOBAL2_DEVICE_MAPPING_TARGET_SHIFT 8
#define GLOBAL2_DEVICE_MAPPING_PORT_MASK 0x0f
#define GLOBAL2_TRUNK_MASK 0x07
#define GLOBAL2_TRUNK_MASK_UPDATE BIT(15)
#define GLOBAL2_TRUNK_MASK_NUM_SHIFT 12
#define GLOBAL2_TRUNK_MAPPING 0x08
#define GLOBAL2_TRUNK_MAPPING_UPDATE BIT(15)
#define GLOBAL2_TRUNK_MAPPING_ID_SHIFT 11
#define GLOBAL2_INGRESS_OP 0x09
#define GLOBAL2_INGRESS_DATA 0x0a
#define GLOBAL2_PVT_ADDR 0x0b
#define GLOBAL2_PVT_DATA 0x0c
#define GLOBAL2_SWITCH_MAC 0x0d
#define GLOBAL2_SWITCH_MAC_BUSY BIT(15)
#define GLOBAL2_ATU_STATS 0x0e
#define GLOBAL2_PRIO_OVERRIDE 0x0f
#define GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP BIT(7)
#define GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT 4
#define GLOBAL2_PRIO_OVERRIDE_FORCE_ARP BIT(3)
#define GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT 0
#define GLOBAL2_EEPROM_OP 0x14
#define GLOBAL2_EEPROM_OP_BUSY BIT(15)
#define GLOBAL2_EEPROM_OP_WRITE ((3 << 12) | GLOBAL2_EEPROM_OP_BUSY)
#define GLOBAL2_EEPROM_OP_READ ((4 << 12) | GLOBAL2_EEPROM_OP_BUSY)
#define GLOBAL2_EEPROM_OP_LOAD BIT(11)
#define GLOBAL2_EEPROM_OP_WRITE_EN BIT(10)
#define GLOBAL2_EEPROM_OP_ADDR_MASK 0xff
#define GLOBAL2_EEPROM_DATA 0x15
#define GLOBAL2_PTP_AVB_OP 0x16
#define GLOBAL2_PTP_AVB_DATA 0x17
#define GLOBAL2_SMI_OP 0x18
#define GLOBAL2_SMI_OP_BUSY BIT(15)
#define GLOBAL2_SMI_OP_CLAUSE_22 BIT(12)
#define GLOBAL2_SMI_OP_22_WRITE ((1 << 10) | GLOBAL2_SMI_OP_BUSY | \
GLOBAL2_SMI_OP_CLAUSE_22)
#define GLOBAL2_SMI_OP_22_READ ((2 << 10) | GLOBAL2_SMI_OP_BUSY | \
GLOBAL2_SMI_OP_CLAUSE_22)
#define GLOBAL2_SMI_OP_45_WRITE_ADDR ((0 << 10) | GLOBAL2_SMI_OP_BUSY)
#define GLOBAL2_SMI_OP_45_WRITE_DATA ((1 << 10) | GLOBAL2_SMI_OP_BUSY)
#define GLOBAL2_SMI_OP_45_READ_DATA ((2 << 10) | GLOBAL2_SMI_OP_BUSY)
#define GLOBAL2_SMI_DATA 0x19
#define GLOBAL2_SCRATCH_MISC 0x1a
#define GLOBAL2_SCRATCH_BUSY BIT(15)
#define GLOBAL2_SCRATCH_REGISTER_SHIFT 8
#define GLOBAL2_SCRATCH_VALUE_MASK 0xff
#define GLOBAL2_WDOG_CONTROL 0x1b
#define GLOBAL2_QOS_WEIGHT 0x1c
#define GLOBAL2_MISC 0x1d
#define MV88E6XXX_N_FID 4096
struct mv88e6xxx_switch_id {
u16 id;
char *name;
};
struct mv88e6xxx_atu_entry {
u16 fid;
u8 state;
bool trunk;
u16 portv_trunkid;
u8 mac[ETH_ALEN];
};
struct mv88e6xxx_vtu_stu_entry {
/* VTU only */
u16 vid;
u16 fid;
/* VTU and STU */
u8 sid;
bool valid;
u8 data[DSA_MAX_PORTS];
};
struct mv88e6xxx_priv_port {
struct net_device *bridge_dev;
u8 state;
};
struct mv88e6xxx_priv_state {
/* When using multi-chip addressing, this mutex protects
* access to the indirect access registers. (In single-chip
* mode, this mutex is effectively useless.)
*/
struct mutex smi_mutex;
#ifdef CONFIG_NET_DSA_MV88E6XXX_NEED_PPU
/* Handles automatic disabling and re-enabling of the PHY
* polling unit.
*/
struct mutex ppu_mutex;
int ppu_disabled;
struct work_struct ppu_work;
struct timer_list ppu_timer;
#endif
/* This mutex serialises access to the statistics unit.
* Hold this mutex over snapshot + dump sequences.
*/
struct mutex stats_mutex;
/* This mutex serializes phy access for chips with
* indirect phy addressing. It is unused for chips
* with direct phy access.
*/
struct mutex phy_mutex;
/* This mutex serializes eeprom access for chips with
* eeprom support.
*/
struct mutex eeprom_mutex;
int id; /* switch product id */
int num_ports; /* number of switch ports */
struct mv88e6xxx_priv_port ports[DSA_MAX_PORTS];
DECLARE_BITMAP(port_state_update_mask, DSA_MAX_PORTS);
struct work_struct bridge_work;
};
enum stat_type {
BANK0,
BANK1,
PORT,
};
struct mv88e6xxx_hw_stat {
char string[ETH_GSTRING_LEN];
int sizeof_stat;
int reg;
enum stat_type type;
};
int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active);
char *mv88e6xxx_lookup_name(struct device *host_dev, int sw_addr,
const struct mv88e6xxx_switch_id *table,
unsigned int num);
int mv88e6xxx_setup_ports(struct dsa_switch *ds);
int mv88e6xxx_setup_common(struct dsa_switch *ds);
int mv88e6xxx_setup_global(struct dsa_switch *ds);
int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);
int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val);
int mv88e6xxx_set_addr_direct(struct dsa_switch *ds, u8 *addr);
int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr);
int mv88e6xxx_phy_read(struct dsa_switch *ds, int port, int regnum);
int mv88e6xxx_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val);
int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int port, int regnum);
int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int port, int regnum,
u16 val);
void mv88e6xxx_ppu_state_init(struct dsa_switch *ds);
int mv88e6xxx_phy_read_ppu(struct dsa_switch *ds, int addr, int regnum);
int mv88e6xxx_phy_write_ppu(struct dsa_switch *ds, int addr,
int regnum, u16 val);
void mv88e6xxx_get_strings(struct dsa_switch *ds, int port, uint8_t *data);
void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data);
int mv88e6xxx_get_sset_count(struct dsa_switch *ds);
int mv88e6xxx_get_sset_count_basic(struct dsa_switch *ds);
void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev);
int mv88e6xxx_get_regs_len(struct dsa_switch *ds, int port);
void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
struct ethtool_regs *regs, void *_p);
int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp);
int mv88e6xxx_get_temp_limit(struct dsa_switch *ds, int *temp);
int mv88e6xxx_set_temp_limit(struct dsa_switch *ds, int temp);
int mv88e6xxx_get_temp_alarm(struct dsa_switch *ds, bool *alarm);
int mv88e6xxx_eeprom_load_wait(struct dsa_switch *ds);
int mv88e6xxx_eeprom_busy_wait(struct dsa_switch *ds);
int mv88e6xxx_phy_read_indirect(struct dsa_switch *ds, int addr, int regnum);
int mv88e6xxx_phy_write_indirect(struct dsa_switch *ds, int addr, int regnum,
u16 val);
int mv88e6xxx_get_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
struct phy_device *phydev, struct ethtool_eee *e);
int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port,
struct net_device *bridge);
void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port);
int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
bool vlan_filtering);
int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan);
int mv88e6xxx_port_vlan_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_vlan *vlan,
int (*cb)(struct switchdev_obj *obj));
int mv88e6xxx_port_fdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb);
int mv88e6xxx_port_fdb_dump(struct dsa_switch *ds, int port,
struct switchdev_obj_port_fdb *fdb,
int (*cb)(struct switchdev_obj *obj));
int mv88e6xxx_phy_page_read(struct dsa_switch *ds, int port, int page, int reg);
int mv88e6xxx_phy_page_write(struct dsa_switch *ds, int port, int page,
int reg, int val);
extern struct dsa_switch_driver mv88e6131_switch_driver;
extern struct dsa_switch_driver mv88e6123_switch_driver;
extern struct dsa_switch_driver mv88e6352_switch_driver;
extern struct dsa_switch_driver mv88e6171_switch_driver;
#define REG_READ(addr, reg) \
({ \
int __ret; \
\
__ret = mv88e6xxx_reg_read(ds, addr, reg); \
if (__ret < 0) \
return __ret; \
__ret; \
})
#define REG_WRITE(addr, reg, val) \
({ \
int __ret; \
\
__ret = mv88e6xxx_reg_write(ds, addr, reg, val); \
if (__ret < 0) \
return __ret; \
})
#endif
View git blame Copy permalink