redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/exynos5250.dtsi
Linus Torvalds 5c73cc4b6c ARM: DT updates for v4.1 
As always, this tends to be one of our bigger branches. There are lots of
 updates this release, but not that many jumps out as something that needs
 more detailed coverage. Some of the highlights are:
 
 - DTs for the new Annapurna Labs Alpine platform
 - More graphics DT pieces falling into place on Exynos, bridges, clocks.
 - Plenty of DT updates for Qualcomm platforms for various IP blocks
 - Some churn on Tegra due to switch-over to tool-generated pinctrl data
 - Misc fixes and updates for Atmel at91 platforms
 - Various DT updates to add IP block support on Broadcom's Cygnus platforms
 - More updates for Renesas platforms as DT support is added for various IP
   blocks (IPMMU, display, audio, etc).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzKFAAoJEIwa5zzehBx3JtEP/1g89CW7iZHAUyIiC+jtgqck
 ASoplr13DLD0HWjjWITX3zm7J/iY57YjEv14tHH/xmrh5YCCZ+mRLqiD/Plnv0Zv
 JdJRRJv/NMnMlu/tA1aBO326JOt2Vw+3YngmYayDpoRzVifx2YTJLbu2difa+6rM
 vN6FpOE6U5jkvM16+gqxKxyx0tGIQz9cTn+9q2V1fDS++vZ2VvqfB5pTNul3BKAF
 OVCNFJ/EUE9EPMPbmgDjYmNE/POj64kF32n7NBEQz2Z+nwDNxDAecfF356hV7o5g
 JsFLNK+4c2QQqBL775xzCf5kK+n/V2cFEpDica+hU70AdWsjdAlUFrbOsWGUJLRi
 4Blrv8GRxEKeOCs8AFKYCM+z3zf2ais7JMteD2VW26ywCwpUt+QEZTUVHRHU3NYQ
 BMI7uyTGIH2GyLyS+Av3vikza8IbDIwlYuuDpXhCJSXXgKSnbzCrpjkhyGLccBJR
 k3qgUwPJVw9hP1qaaNgvb7p9oNhTP2yLl3fQ68WqI7QWIupW0/s12INhzFFgt6zU
 Nzcx010ku9yMeMMGtfiNgA3cMln+Ysfs1UIUOMQ36zP1PCtHJkZgwtZzTsBE4A04
 KqmiLL/+7qsconEhEanmDzTpeXiNzERnOKSSqVN7Fwp89GEFJLrWpHSXI+8SBTHC
 fB54LRTNYdlcoN0QshcT
 =wqhB
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...
2015-04-22 09:09:46 -07:00

815 lines
19 KiB
Plaintext
Raw Blame History

/*
* SAMSUNG EXYNOS5250 SoC device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
* EXYNOS5250 based board files can include this file and provide
* values for board specfic bindings.
*
* Note: This file does not include device nodes for all the controllers in
* EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
* additional nodes can be added to this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
compatible = "samsung,exynos5250", "samsung,exynos5";
aliases {
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
gsc0 = &gsc_0;
gsc1 = &gsc_1;
gsc2 = &gsc_2;
gsc3 = &gsc_3;
mshc0 = &mmc_0;
mshc1 = &mmc_1;
mshc2 = &mmc_2;
mshc3 = &mmc_3;
i2c0 = &i2c_0;
i2c1 = &i2c_1;
i2c2 = &i2c_2;
i2c3 = &i2c_3;
i2c4 = &i2c_4;
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
i2c9 = &i2c_9;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1700000000>;
};
};
sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x30000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x02020000 0x30000>;
smp-sysram@0 {
compatible = "samsung,exynos4210-sysram";
reg = <0x0 0x1000>;
};
smp-sysram@2f000 {
compatible = "samsung,exynos4210-sysram-ns";
reg = <0x2f000 0x1000>;
};
};
pd_gsc: gsc-power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
#power-domain-cells = <0>;
};
pd_mfc: mfc-power-domain@10044040 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044040 0x20>;
#power-domain-cells = <0>;
};
pd_disp1: disp1-power-domain@100440A0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440A0 0x20>;
#power-domain-cells = <0>;
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
};
clock_audss: audss-clock-controller@3810000 {
compatible = "samsung,exynos5250-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
<&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
/* Unfortunately we need this since some versions of U-Boot
* on Exynos don't set the CNTFRQ register, so we need the
* value from DT.
*/
clock-frequency = <24000000>;
};
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&mct_map>;
interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
<4 0>, <5 0>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
#interrupt-cells = <2>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0x0 0 &combiner 23 3>,
<0x1 0 &combiner 23 4>,
<0x2 0 &combiner 25 2>,
<0x3 0 &combiner 25 3>,
<0x4 0 &gic 0 120 0>,
<0x5 0 &gic 0 121 0>;
};
};
pmu {
compatible = "arm,cortex-a15-pmu";
interrupt-parent = <&combiner>;
interrupts = <1 2>, <22 4>;
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 46 0>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 32 0>;
};
};
pinctrl_1: pinctrl@13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
interrupts = <0 45 0>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
interrupts = <0 50 0>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5250-pmu", "syscon";
reg = <0x10040000 0x5000>;
clock-names = "clkout16";
clocks = <&clock CLK_FIN_PLL>;
#clock-cells = <1>;
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
};
sysreg_system_controller: syscon@10050000 {
compatible = "samsung,exynos5-sysreg", "syscon";
reg = <0x10050000 0x5000>;
};
watchdog@101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
};
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
interrupts = <0 91 0>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
};
mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
serial@12C00000 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
phy-names = "sata-phy";
status = "disabled";
};
sata_phy: sata-phy@12170000 {
compatible = "samsung,exynos5250-sata-phy";
reg = <0x12170000 0x1ff>;
clocks = <&clock CLK_SATA_PHYCTRL>;
clock-names = "sata_phyctrl";
#phy-cells = <0>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
i2c_0: i2c@12C60000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
i2c_1: i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
i2c_2: i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
i2c_3: i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
i2c_4: i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
status = "disabled";
};
i2c_5: i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
status = "disabled";
};
i2c_6: i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
status = "disabled";
};
i2c_7: i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
status = "disabled";
};
i2c_8: i2c@12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
};
i2c_9: i2c@121D0000 {
compatible = "samsung,exynos5-sata-phy-i2c";
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SATA_PHYI2C>;
clock-names = "i2c";
status = "disabled";
};
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
};
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
interrupts = <0 67 0>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
};
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
interrupts = <0 68 0>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
};
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
interrupts = <0 76 0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
interrupts = <0 77 0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
mmc_3: mmc@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
status = "disabled";
};
i2s0: i2s@03830000 {
compatible = "samsung,s5pv210-i2s";
status = "disabled";
reg = <0x03830000 0x100>;
dmas = <&pdma0 10
&pdma0 9
&pdma0 8>;
dma-names = "tx", "rx", "tx-sec";
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
};
i2s1: i2s@12D60000 {
compatible = "samsung,s3c6410-i2s";
status = "disabled";
reg = <0x12D60000 0x100>;
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
};
i2s2: i2s@12D70000 {
compatible = "samsung,s3c6410-i2s";
status = "disabled";
reg = <0x12D70000 0x100>;
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
clock-names = "iis", "i2s_opclk0";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
};
usb@12000000 {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
#address-cells = <1>;
#size-cells = <1>;
ranges;
usbdrd_dwc3: dwc3 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <0 72 0>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
};
usbdrd_phy: phy@12100000 {
compatible = "samsung,exynos5250-usbdrd-phy";
reg = <0x12100000 0x100>;
clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
clock-names = "phy", "ref";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};
ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
phys = <&usb2_phy_gen 1>;
};
};
ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
phys = <&usb2_phy_gen 1>;
};
};
usb2_phy_gen: phy@12130000 {
compatible = "samsung,exynos5250-usb2-phy";
reg = <0x12130000 0x100>;
clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
clock-names = "phy", "ref";
#phy-cells = <1>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
samsung,pmureg-phandle = <&pmu_system_controller>;
};
pwm: pwm@12dd0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x12dd0000 0x100>;
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
#pwm-cells = <3>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,amba-bus";
interrupt-parent = <&gic>;
ranges;
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
};
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
};
gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
};
gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
};
gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
};
hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
samsung,syscon-phandle = <&pmu_system_controller>;
};
mixer {
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
};
dp_phy: video-phy@10040720 {
compatible = "samsung,exynos5250-dp-video-phy";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
dp: dp-controller@145B0000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
fimd: fimd@14400000 {
power-domains = <&pd_disp1>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
interrupts = <0 106 0>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x10000>;
interrupts = <0 112 0>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
};
View git blame Copy permalink