redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/acpi/acpica/evrgnini.c
Erik Schmauss aa342261bd ACPICA: Remove legacy module-level code support 
ACPICA commit 47f5607c204719d9239a12b889df725225098c8f

Module-level code refers to executable ASL code that runs during
table load. This is typically used in ASL to declare named objects
based on a condition evaluated during table load like so:

definition_block(...)
{
  opreation_region (OPR1, system_memory, ...)
  Field (OPR1)
  {
    FLD1, 8 /* Assume that FLD1's value is 0x1 */
  }

  /* The if statement below is referred to as module-level code */

  If (FLD1)
  {
    /* Declare DEV1 conditionally */
    Device (DEV1) {...}
  }

  Device (DEV2)
  {
    ...
  }
}

In legacy module-level code, the execution of the If statement
was deferred after other modules were loaded. The order of
code execution for the table above is the following:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Load DEV2 to the ACPI Namespace
4.) Execute If (FLD1) and load DEV1 if the condition is true

This legacy approach can be problematic for tables that look like the
following:

definition_block(...)
{
  opreation_region (OPR1, system_memory, ...)
  Field (OPR1)
  {
    FLD1, 8 /* Assume that FLD1's value is 0x1 */
  }

  /* The if statement below is referred to as module-level code */

  If (FLD1)
  {
    /* Declare DEV1 conditionally */
    Device (DEV1) {...}
  }

  Scope (DEV1)
  {
    /* Add objects DEV1's scope */
    Name (OBJ1, 0x1234)
  }
}

When loading this in the legacy approach, Scope DEV1 gets evaluated
before the If statement. The following is the order of execution:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Add OBJ1 under DEV1's scope -- ERROR. DEV1 does not exist
4.) Execute If (FLD1) and load DEV1 if the condition is true

The legacy approach can never succeed for tables like this due to the
deferral of the module-level code. Due to this limitation, a new
module-level code was developed. This new approach exeutes if
statements in the order that they appear in the definition block.
With this approach, the order of execution for the above defintion
block is as follows:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Execute If (FLD1) and load DEV1 because the condition is true
4.) Add OBJ1 under DEV1's scope.

Since DEV1 is loaded in the namespace in step 3, step 4 executes
successfully.

This change removes support for the legacy module-level code
execution. From this point onward, the new module-level code
execution will be the official approach.

Link: https://github.com/acpica/acpica/commit/47f5607c
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:21:10 +01:00

569 lines
16 KiB
C
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/******************************************************************************
*
* Module Name: evrgnini- ACPI address_space (op_region) init
*
* Copyright (C) 2000 - 2019, Intel Corp.
*
*****************************************************************************/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#include "acinterp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evrgnini")
/*******************************************************************************
*
* FUNCTION: acpi_ev_system_memory_region_setup
*
* PARAMETERS: handle - Region we are interested in
* function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
* DESCRIPTION: Setup a system_memory operation region
*
******************************************************************************/
acpi_status
acpi_ev_system_memory_region_setup(acpi_handle handle,
u32 function,
void *handler_context, void **region_context)
{
union acpi_operand_object *region_desc =
(union acpi_operand_object *)handle;
struct acpi_mem_space_context *local_region_context;
ACPI_FUNCTION_TRACE(ev_system_memory_region_setup);
if (function == ACPI_REGION_DEACTIVATE) {
if (*region_context) {
local_region_context =
(struct acpi_mem_space_context *)*region_context;
/* Delete a cached mapping if present */
if (local_region_context->mapped_length) {
acpi_os_unmap_memory(local_region_context->
mapped_logical_address,
local_region_context->
mapped_length);
}
ACPI_FREE(local_region_context);
*region_context = NULL;
}
return_ACPI_STATUS(AE_OK);
}
/* Create a new context */
local_region_context =
ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_mem_space_context));
if (!(local_region_context)) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Save the region length and address for use in the handler */
local_region_context->length = region_desc->region.length;
local_region_context->address = region_desc->region.address;
*region_context = local_region_context;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_io_space_region_setup
*
* PARAMETERS: handle - Region we are interested in
* function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
* DESCRIPTION: Setup a IO operation region
*
******************************************************************************/
acpi_status
acpi_ev_io_space_region_setup(acpi_handle handle,
u32 function,
void *handler_context, void **region_context)
{
ACPI_FUNCTION_TRACE(ev_io_space_region_setup);
if (function == ACPI_REGION_DEACTIVATE) {
*region_context = NULL;
} else {
*region_context = handler_context;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_pci_config_region_setup
*
* PARAMETERS: handle - Region we are interested in
* function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
* DESCRIPTION: Setup a PCI_Config operation region
*
* MUTEX: Assumes namespace is not locked
*
******************************************************************************/
acpi_status
acpi_ev_pci_config_region_setup(acpi_handle handle,
u32 function,
void *handler_context, void **region_context)
{
acpi_status status = AE_OK;
u64 pci_value;
struct acpi_pci_id *pci_id = *region_context;
union acpi_operand_object *handler_obj;
struct acpi_namespace_node *parent_node;
struct acpi_namespace_node *pci_root_node;
struct acpi_namespace_node *pci_device_node;
union acpi_operand_object *region_obj =
(union acpi_operand_object *)handle;
ACPI_FUNCTION_TRACE(ev_pci_config_region_setup);
handler_obj = region_obj->region.handler;
if (!handler_obj) {
/*
* No installed handler. This shouldn't happen because the dispatch
* routine checks before we get here, but we check again just in case.
*/
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Attempting to init a region %p, with no handler\n",
region_obj));
return_ACPI_STATUS(AE_NOT_EXIST);
}
*region_context = NULL;
if (function == ACPI_REGION_DEACTIVATE) {
if (pci_id) {
ACPI_FREE(pci_id);
}
return_ACPI_STATUS(status);
}
parent_node = region_obj->region.node->parent;
/*
* Get the _SEG and _BBN values from the device upon which the handler
* is installed.
*
* We need to get the _SEG and _BBN objects relative to the PCI BUS device.
* This is the device the handler has been registered to handle.
*/
/*
* If the address_space.Node is still pointing to the root, we need
* to scan upward for a PCI Root bridge and re-associate the op_region
* handlers with that device.
*/
if (handler_obj->address_space.node == acpi_gbl_root_node) {
/* Start search from the parent object */
pci_root_node = parent_node;
while (pci_root_node != acpi_gbl_root_node) {
/* Get the _HID/_CID in order to detect a root_bridge */
if (acpi_ev_is_pci_root_bridge(pci_root_node)) {
/* Install a handler for this PCI root bridge */
status = acpi_install_address_space_handler((acpi_handle)pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
if (ACPI_FAILURE(status)) {
if (status == AE_SAME_HANDLER) {
/*
* It is OK if the handler is already installed on the
* root bridge. Still need to return a context object
* for the new PCI_Config operation region, however.
*/
status = AE_OK;
} else {
ACPI_EXCEPTION((AE_INFO, status,
"Could not install PciConfig handler "
"for Root Bridge %4.4s",
acpi_ut_get_node_name
(pci_root_node)));
}
}
break;
}
pci_root_node = pci_root_node->parent;
}
/* PCI root bridge not found, use namespace root node */
} else {
pci_root_node = handler_obj->address_space.node;
}
/*
* If this region is now initialized, we are done.
* (install_address_space_handler could have initialized it)
*/
if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
return_ACPI_STATUS(AE_OK);
}
/* Region is still not initialized. Create a new context */
pci_id = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pci_id));
if (!pci_id) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/*
* For PCI_Config space access, we need the segment, bus, device and
* function numbers. Acquire them here.
*
* Find the parent device object. (This allows the operation region to be
* within a subscope under the device, such as a control method.)
*/
pci_device_node = region_obj->region.node;
while (pci_device_node && (pci_device_node->type != ACPI_TYPE_DEVICE)) {
pci_device_node = pci_device_node->parent;
}
if (!pci_device_node) {
ACPI_FREE(pci_id);
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/*
* Get the PCI device and function numbers from the _ADR object
* contained in the parent's scope.
*/
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR,
pci_device_node, &pci_value);
/*
* The default is zero, and since the allocation above zeroed the data,
* just do nothing on failure.
*/
if (ACPI_SUCCESS(status)) {
pci_id->device = ACPI_HIWORD(ACPI_LODWORD(pci_value));
pci_id->function = ACPI_LOWORD(ACPI_LODWORD(pci_value));
}
/* The PCI segment number comes from the _SEG method */
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG,
pci_root_node, &pci_value);
if (ACPI_SUCCESS(status)) {
pci_id->segment = ACPI_LOWORD(pci_value);
}
/* The PCI bus number comes from the _BBN method */
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN,
pci_root_node, &pci_value);
if (ACPI_SUCCESS(status)) {
pci_id->bus = ACPI_LOWORD(pci_value);
}
/* Complete/update the PCI ID for this device */
status =
acpi_hw_derive_pci_id(pci_id, pci_root_node,
region_obj->region.node);
if (ACPI_FAILURE(status)) {
ACPI_FREE(pci_id);
return_ACPI_STATUS(status);
}
*region_context = pci_id;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_is_pci_root_bridge
*
* PARAMETERS: node - Device node being examined
*
* RETURN: TRUE if device is a PCI/PCI-Express Root Bridge
*
* DESCRIPTION: Determine if the input device represents a PCI Root Bridge by
* examining the _HID and _CID for the device.
*
******************************************************************************/
u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
struct acpi_pnp_device_id *hid;
struct acpi_pnp_device_id_list *cid;
u32 i;
u8 match;
/* Get the _HID and check for a PCI Root Bridge */
status = acpi_ut_execute_HID(node, &hid);
if (ACPI_FAILURE(status)) {
return (FALSE);
}
match = acpi_ut_is_pci_root_bridge(hid->string);
ACPI_FREE(hid);
if (match) {
return (TRUE);
}
/* The _HID did not match. Get the _CID and check for a PCI Root Bridge */
status = acpi_ut_execute_CID(node, &cid);
if (ACPI_FAILURE(status)) {
return (FALSE);
}
/* Check all _CIDs in the returned list */
for (i = 0; i < cid->count; i++) {
if (acpi_ut_is_pci_root_bridge(cid->ids[i].string)) {
ACPI_FREE(cid);
return (TRUE);
}
}
ACPI_FREE(cid);
return (FALSE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_pci_bar_region_setup
*
* PARAMETERS: handle - Region we are interested in
* function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
* DESCRIPTION: Setup a pci_BAR operation region
*
* MUTEX: Assumes namespace is not locked
*
******************************************************************************/
acpi_status
acpi_ev_pci_bar_region_setup(acpi_handle handle,
u32 function,
void *handler_context, void **region_context)
{
ACPI_FUNCTION_TRACE(ev_pci_bar_region_setup);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_cmos_region_setup
*
* PARAMETERS: handle - Region we are interested in
* function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
* DESCRIPTION: Setup a CMOS operation region
*
* MUTEX: Assumes namespace is not locked
*
******************************************************************************/
acpi_status
acpi_ev_cmos_region_setup(acpi_handle handle,
u32 function,
void *handler_context, void **region_context)
{
ACPI_FUNCTION_TRACE(ev_cmos_region_setup);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_default_region_setup
*
* PARAMETERS: handle - Region we are interested in
* function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
* DESCRIPTION: Default region initialization
*
******************************************************************************/
acpi_status
acpi_ev_default_region_setup(acpi_handle handle,
u32 function,
void *handler_context, void **region_context)
{
ACPI_FUNCTION_TRACE(ev_default_region_setup);
if (function == ACPI_REGION_DEACTIVATE) {
*region_context = NULL;
} else {
*region_context = handler_context;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_initialize_region
*
* PARAMETERS: region_obj - Region we are initializing
*
* RETURN: Status
*
* DESCRIPTION: Initializes the region, finds any _REG methods and saves them
* for execution at a later time
*
* Get the appropriate address space handler for a newly
* created region.
*
* This also performs address space specific initialization. For
* example, PCI regions must have an _ADR object that contains
* a PCI address in the scope of the definition. This address is
* required to perform an access to PCI config space.
*
* MUTEX: Interpreter should be unlocked, because we may run the _REG
* method for this region.
*
* NOTE: Possible incompliance:
* There is a behavior conflict in automatic _REG execution:
* 1. When the interpreter is evaluating a method, we can only
* automatically run _REG for the following case:
* operation_region (OPR1, 0x80, 0x1000010, 0x4)
* 2. When the interpreter is loading a table, we can also
* automatically run _REG for the following case:
* operation_region (OPR1, 0x80, 0x1000010, 0x4)
* Though this may not be compliant to the de-facto standard, the
* logic is kept in order not to trigger regressions. And keeping
* this logic should be taken care by the caller of this function.
*
******************************************************************************/
acpi_status acpi_ev_initialize_region(union acpi_operand_object *region_obj)
{
union acpi_operand_object *handler_obj;
union acpi_operand_object *obj_desc;
acpi_adr_space_type space_id;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(ev_initialize_region);
if (!region_obj) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (region_obj->common.flags & AOPOBJ_OBJECT_INITIALIZED) {
return_ACPI_STATUS(AE_OK);
}
region_obj->common.flags |= AOPOBJ_OBJECT_INITIALIZED;
node = region_obj->region.node->parent;
space_id = region_obj->region.space_id;
/*
* The following loop depends upon the root Node having no parent
* ie: acpi_gbl_root_node->Parent being set to NULL
*/
while (node) {
/* Check to see if a handler exists */
handler_obj = NULL;
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
/* Can only be a handler if the object exists */
switch (node->type) {
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
handler_obj = obj_desc->common_notify.handler;
break;
default:
/* Ignore other objects */
break;
}
handler_obj =
acpi_ev_find_region_handler(space_id, handler_obj);
if (handler_obj) {
/* Found correct handler */
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"Found handler %p for region %p in obj %p\n",
handler_obj, region_obj,
obj_desc));
(void)acpi_ev_attach_region(handler_obj,
region_obj, FALSE);
/*
* Tell all users that this region is usable by
* running the _REG method
*/
acpi_ex_exit_interpreter();
(void)acpi_ev_execute_reg_method(region_obj,
ACPI_REG_CONNECT);
acpi_ex_enter_interpreter();
return_ACPI_STATUS(AE_OK);
}
}
/* This node does not have the handler we need; Pop up one level */
node = node->parent;
}
/*
* If we get here, there is no handler for this region. This is not
* fatal because many regions get created before a handler is installed
* for said region.
*/
ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
"No handler for RegionType %s(%X) (RegionObj %p)\n",
acpi_ut_get_region_name(space_id), space_id,
region_obj));
return_ACPI_STATUS(AE_OK);
}
View git blame Copy permalink