redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/acpi/acpica/psloop.c
Erik Schmauss aa342261bd ACPICA: Remove legacy module-level code support 
ACPICA commit 47f5607c204719d9239a12b889df725225098c8f

Module-level code refers to executable ASL code that runs during
table load. This is typically used in ASL to declare named objects
based on a condition evaluated during table load like so:

definition_block(...)
{
  opreation_region (OPR1, system_memory, ...)
  Field (OPR1)
  {
    FLD1, 8 /* Assume that FLD1's value is 0x1 */
  }

  /* The if statement below is referred to as module-level code */

  If (FLD1)
  {
    /* Declare DEV1 conditionally */
    Device (DEV1) {...}
  }

  Device (DEV2)
  {
    ...
  }
}

In legacy module-level code, the execution of the If statement
was deferred after other modules were loaded. The order of
code execution for the table above is the following:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Load DEV2 to the ACPI Namespace
4.) Execute If (FLD1) and load DEV1 if the condition is true

This legacy approach can be problematic for tables that look like the
following:

definition_block(...)
{
  opreation_region (OPR1, system_memory, ...)
  Field (OPR1)
  {
    FLD1, 8 /* Assume that FLD1's value is 0x1 */
  }

  /* The if statement below is referred to as module-level code */

  If (FLD1)
  {
    /* Declare DEV1 conditionally */
    Device (DEV1) {...}
  }

  Scope (DEV1)
  {
    /* Add objects DEV1's scope */
    Name (OBJ1, 0x1234)
  }
}

When loading this in the legacy approach, Scope DEV1 gets evaluated
before the If statement. The following is the order of execution:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Add OBJ1 under DEV1's scope -- ERROR. DEV1 does not exist
4.) Execute If (FLD1) and load DEV1 if the condition is true

The legacy approach can never succeed for tables like this due to the
deferral of the module-level code. Due to this limitation, a new
module-level code was developed. This new approach exeutes if
statements in the order that they appear in the definition block.
With this approach, the order of execution for the above defintion
block is as follows:

1.) Load OPR1 to the ACPI Namespace
2.) Load FLD1 to the ACPI Namespace (not intended for drivers)
3.) Execute If (FLD1) and load DEV1 because the condition is true
4.) Add OBJ1 under DEV1's scope.

Since DEV1 is loaded in the namespace in step 3, step 4 executes
successfully.

This change removes support for the legacy module-level code
execution. From this point onward, the new module-level code
execution will be the official approach.

Link: https://github.com/acpica/acpica/commit/47f5607c
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-18 11:21:10 +01:00

563 lines
15 KiB
C
Raw Blame History

// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
/******************************************************************************
*
* Module Name: psloop - Main AML parse loop
*
* Copyright (C) 2000 - 2019, Intel Corp.
*
*****************************************************************************/
/*
* Parse the AML and build an operation tree as most interpreters, (such as
* Perl) do. Parsing is done by hand rather than with a YACC generated parser
* to tightly constrain stack and dynamic memory usage. Parsing is kept
* flexible and the code fairly compact by parsing based on a list of AML
* opcode templates in aml_op_info[].
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acinterp.h"
#include "acparser.h"
#include "acdispat.h"
#include "amlcode.h"
#include "acconvert.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psloop")
/* Local prototypes */
static acpi_status
acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object *op);
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_arguments
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Op start in AML
* op - Current Op
*
* RETURN: Status
*
* DESCRIPTION: Get arguments for passed Op.
*
******************************************************************************/
static acpi_status
acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
u8 * aml_op_start, union acpi_parse_object *op)
{
acpi_status status = AE_OK;
union acpi_parse_object *arg = NULL;
ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state);
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Get arguments for opcode [%s]\n",
op->common.aml_op_name));
switch (op->common.aml_opcode) {
case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
case AML_WORD_OP: /* AML_WORDDATA_ARG */
case AML_DWORD_OP: /* AML_DWORDATA_ARG */
case AML_QWORD_OP: /* AML_QWORDATA_ARG */
case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */
/* Fill in constant or string argument directly */
acpi_ps_get_next_simple_arg(&(walk_state->parser_state),
GET_CURRENT_ARG_TYPE(walk_state->
arg_types),
op);
break;
case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */
status = acpi_ps_get_next_namepath(walk_state,
&(walk_state->parser_state),
op,
ACPI_POSSIBLE_METHOD_CALL);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
walk_state->arg_types = 0;
break;
default:
/*
* Op is not a constant or string, append each argument to the Op
*/
while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
!walk_state->arg_count) {
walk_state->aml = walk_state->parser_state.aml;
switch (op->common.aml_opcode) {
case AML_METHOD_OP:
case AML_BUFFER_OP:
case AML_PACKAGE_OP:
case AML_VARIABLE_PACKAGE_OP:
case AML_WHILE_OP:
break;
default:
ASL_CV_CAPTURE_COMMENTS(walk_state);
break;
}
status =
acpi_ps_get_next_arg(walk_state,
&(walk_state->parser_state),
GET_CURRENT_ARG_TYPE
(walk_state->arg_types), &arg);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (arg) {
acpi_ps_append_arg(op, arg);
}
INCREMENT_ARG_LIST(walk_state->arg_types);
}
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Final argument count: %8.8X pass %u\n",
walk_state->arg_count,
walk_state->pass_number));
/* Special processing for certain opcodes */
switch (op->common.aml_opcode) {
case AML_METHOD_OP:
/*
* Skip parsing of control method because we don't have enough
* info in the first pass to parse it correctly.
*
* Save the length and address of the body
*/
op->named.data = walk_state->parser_state.aml;
op->named.length = (u32)
(walk_state->parser_state.pkg_end -
walk_state->parser_state.aml);
/* Skip body of method */
walk_state->parser_state.aml =
walk_state->parser_state.pkg_end;
walk_state->arg_count = 0;
break;
case AML_BUFFER_OP:
case AML_PACKAGE_OP:
case AML_VARIABLE_PACKAGE_OP:
if ((op->common.parent) &&
(op->common.parent->common.aml_opcode ==
AML_NAME_OP)
&& (walk_state->pass_number <=
ACPI_IMODE_LOAD_PASS2)) {
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Setup Package/Buffer: Pass %u, AML Ptr: %p\n",
walk_state->pass_number,
aml_op_start));
/*
* Skip parsing of Buffers and Packages because we don't have
* enough info in the first pass to parse them correctly.
*/
op->named.data = aml_op_start;
op->named.length = (u32)
(walk_state->parser_state.pkg_end -
aml_op_start);
/* Skip body */
walk_state->parser_state.aml =
walk_state->parser_state.pkg_end;
walk_state->arg_count = 0;
}
break;
case AML_WHILE_OP:
if (walk_state->control_state) {
walk_state->control_state->control.package_end =
walk_state->parser_state.pkg_end;
}
break;
default:
/* No action for all other opcodes */
break;
}
break;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_loop
*
* PARAMETERS: walk_state - Current state
*
* RETURN: Status
*
* DESCRIPTION: Parse AML (pointed to by the current parser state) and return
* a tree of ops.
*
******************************************************************************/
acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_parse_object *op = NULL; /* current op */
struct acpi_parse_state *parser_state;
u8 *aml_op_start = NULL;
u8 opcode_length;
ACPI_FUNCTION_TRACE_PTR(ps_parse_loop, walk_state);
if (walk_state->descending_callback == NULL) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
parser_state = &walk_state->parser_state;
walk_state->arg_types = 0;
#ifndef ACPI_CONSTANT_EVAL_ONLY
if (walk_state->walk_type & ACPI_WALK_METHOD_RESTART) {
/* We are restarting a preempted control method */
if (acpi_ps_has_completed_scope(parser_state)) {
/*
* We must check if a predicate to an IF or WHILE statement
* was just completed
*/
if ((parser_state->scope->parse_scope.op) &&
((parser_state->scope->parse_scope.op->common.
aml_opcode == AML_IF_OP)
|| (parser_state->scope->parse_scope.op->common.
aml_opcode == AML_WHILE_OP))
&& (walk_state->control_state)
&& (walk_state->control_state->common.state ==
ACPI_CONTROL_PREDICATE_EXECUTING)) {
/*
* A predicate was just completed, get the value of the
* predicate and branch based on that value
*/
walk_state->op = NULL;
status =
acpi_ds_get_predicate_value(walk_state,
ACPI_TO_POINTER
(TRUE));
if (ACPI_FAILURE(status)
&& ((status & AE_CODE_MASK) !=
AE_CODE_CONTROL)) {
if (status == AE_AML_NO_RETURN_VALUE) {
ACPI_EXCEPTION((AE_INFO, status,
"Invoked method did not return a value"));
}
ACPI_EXCEPTION((AE_INFO, status,
"GetPredicate Failed"));
return_ACPI_STATUS(status);
}
status =
acpi_ps_next_parse_state(walk_state, op,
status);
}
acpi_ps_pop_scope(parser_state, &op,
&walk_state->arg_types,
&walk_state->arg_count);
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Popped scope, Op=%p\n", op));
} else if (walk_state->prev_op) {
/* We were in the middle of an op */
op = walk_state->prev_op;
walk_state->arg_types = walk_state->prev_arg_types;
}
}
#endif
/* Iterative parsing loop, while there is more AML to process: */
while ((parser_state->aml < parser_state->aml_end) || (op)) {
ASL_CV_CAPTURE_COMMENTS(walk_state);
aml_op_start = parser_state->aml;
if (!op) {
status =
acpi_ps_create_op(walk_state, aml_op_start, &op);
if (ACPI_FAILURE(status)) {
/*
* ACPI_PARSE_MODULE_LEVEL means that we are loading a table by
* executing it as a control method. However, if we encounter
* an error while loading the table, we need to keep trying to
* load the table rather than aborting the table load. Set the
* status to AE_OK to proceed with the table load.
*/
if ((walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)
&& ((status == AE_ALREADY_EXISTS)
|| (status == AE_NOT_FOUND))) {
status = AE_OK;
}
if (status == AE_CTRL_PARSE_CONTINUE) {
continue;
}
if (status == AE_CTRL_PARSE_PENDING) {
status = AE_OK;
}
if (status == AE_CTRL_TERMINATE) {
return_ACPI_STATUS(status);
}
status =
acpi_ps_complete_op(walk_state, &op,
status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (acpi_ns_opens_scope
(acpi_ps_get_opcode_info
(walk_state->opcode)->object_type)) {
/*
* If the scope/device op fails to parse, skip the body of
* the scope op because the parse failure indicates that
* the device may not exist.
*/
ACPI_INFO(("Skipping parse of AML opcode: %s (0x%4.4X)", acpi_ps_get_opcode_name(walk_state->opcode), walk_state->opcode));
/*
* Determine the opcode length before skipping the opcode.
* An opcode can be 1 byte or 2 bytes in length.
*/
opcode_length = 1;
if ((walk_state->opcode & 0xFF00) ==
AML_EXTENDED_OPCODE) {
opcode_length = 2;
}
walk_state->parser_state.aml =
walk_state->aml + opcode_length;
walk_state->parser_state.aml =
acpi_ps_get_next_package_end
(&walk_state->parser_state);
walk_state->aml =
walk_state->parser_state.aml;
}
continue;
}
acpi_ex_start_trace_opcode(op, walk_state);
}
/*
* Start arg_count at zero because we don't know if there are
* any args yet
*/
walk_state->arg_count = 0;
switch (op->common.aml_opcode) {
case AML_BYTE_OP:
case AML_WORD_OP:
case AML_DWORD_OP:
case AML_QWORD_OP:
break;
default:
ASL_CV_CAPTURE_COMMENTS(walk_state);
break;
}
/* Are there any arguments that must be processed? */
if (walk_state->arg_types) {
/* Get arguments */
status =
acpi_ps_get_arguments(walk_state, aml_op_start, op);
if (ACPI_FAILURE(status)) {
status =
acpi_ps_complete_op(walk_state, &op,
status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if ((walk_state->control_state) &&
((walk_state->control_state->control.
opcode == AML_IF_OP)
|| (walk_state->control_state->control.
opcode == AML_WHILE_OP))) {
/*
* If the if/while op fails to parse, we will skip parsing
* the body of the op.
*/
parser_state->aml =
walk_state->control_state->control.
aml_predicate_start + 1;
parser_state->aml =
acpi_ps_get_next_package_end
(parser_state);
walk_state->aml = parser_state->aml;
ACPI_ERROR((AE_INFO,
"Skipping While/If block"));
if (*walk_state->aml == AML_ELSE_OP) {
ACPI_ERROR((AE_INFO,
"Skipping Else block"));
walk_state->parser_state.aml =
walk_state->aml + 1;
walk_state->parser_state.aml =
acpi_ps_get_next_package_end
(parser_state);
walk_state->aml =
parser_state->aml;
}
ACPI_FREE(acpi_ut_pop_generic_state
(&walk_state->control_state));
}
op = NULL;
continue;
}
}
/* Check for arguments that need to be processed */
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Parseloop: argument count: %8.8X\n",
walk_state->arg_count));
if (walk_state->arg_count) {
/*
* There are arguments (complex ones), push Op and
* prepare for argument
*/
status = acpi_ps_push_scope(parser_state, op,
walk_state->arg_types,
walk_state->arg_count);
if (ACPI_FAILURE(status)) {
status =
acpi_ps_complete_op(walk_state, &op,
status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
continue;
}
op = NULL;
continue;
}
/*
* All arguments have been processed -- Op is complete,
* prepare for next
*/
walk_state->op_info =
acpi_ps_get_opcode_info(op->common.aml_opcode);
if (walk_state->op_info->flags & AML_NAMED) {
if (op->common.aml_opcode == AML_REGION_OP ||
op->common.aml_opcode == AML_DATA_REGION_OP) {
/*
* Skip parsing of control method or opregion body,
* because we don't have enough info in the first pass
* to parse them correctly.
*
* Completed parsing an op_region declaration, we now
* know the length.
*/
op->named.length =
(u32) (parser_state->aml - op->named.data);
}
}
if (walk_state->op_info->flags & AML_CREATE) {
/*
* Backup to beginning of create_XXXfield declaration (1 for
* Opcode)
*
* body_length is unknown until we parse the body
*/
op->named.length =
(u32) (parser_state->aml - op->named.data);
}
if (op->common.aml_opcode == AML_BANK_FIELD_OP) {
/*
* Backup to beginning of bank_field declaration
*
* body_length is unknown until we parse the body
*/
op->named.length =
(u32) (parser_state->aml - op->named.data);
}
/* This op complete, notify the dispatcher */
if (walk_state->ascending_callback != NULL) {
walk_state->op = op;
walk_state->opcode = op->common.aml_opcode;
status = walk_state->ascending_callback(walk_state);
status =
acpi_ps_next_parse_state(walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
} else
if ((walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)
&& (ACPI_AML_EXCEPTION(status)
|| status == AE_ALREADY_EXISTS
|| status == AE_NOT_FOUND)) {
/*
* ACPI_PARSE_MODULE_LEVEL flag means that we
* are currently loading a table by executing
* it as a control method. However, if we
* encounter an error while loading the table,
* we need to keep trying to load the table
* rather than aborting the table load (setting
* the status to AE_OK continues the table
* load). If we get a failure at this point, it
* means that the dispatcher got an error while
* trying to execute the Op.
*/
status = AE_OK;
}
}
status = acpi_ps_complete_op(walk_state, &op, status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} /* while parser_state->Aml */
status = acpi_ps_complete_final_op(walk_state, op, status);
return_ACPI_STATUS(status);
}
View git blame Copy permalink