a2c1b455fc
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
228 lines
6.6 KiB
C
228 lines
6.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the NXP ISP1760 chip
|
|
*
|
|
* Copyright 2014 Laurent Pinchart
|
|
* Copyright 2007 Sebastian Siewior
|
|
*
|
|
* Contacts:
|
|
* Sebastian Siewior <bigeasy@linutronix.de>
|
|
* Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
*/
|
|
|
|
#ifndef _ISP1760_REGS_H_
|
|
#define _ISP1760_REGS_H_
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Host Controller
|
|
*/
|
|
|
|
/* EHCI capability registers */
|
|
#define HC_CAPLENGTH 0x000
|
|
#define HC_LENGTH(p) (((p) >> 00) & 0x00ff) /* bits 7:0 */
|
|
#define HC_VERSION(p) (((p) >> 16) & 0xffff) /* bits 31:16 */
|
|
|
|
#define HC_HCSPARAMS 0x004
|
|
#define HCS_INDICATOR(p) ((p) & (1 << 16)) /* true: has port indicators */
|
|
#define HCS_PPC(p) ((p) & (1 << 4)) /* true: port power control */
|
|
#define HCS_N_PORTS(p) (((p) >> 0) & 0xf) /* bits 3:0, ports on HC */
|
|
|
|
#define HC_HCCPARAMS 0x008
|
|
#define HCC_ISOC_CACHE(p) ((p) & (1 << 7)) /* true: can cache isoc frame */
|
|
#define HCC_ISOC_THRES(p) (((p) >> 4) & 0x7) /* bits 6:4, uframes cached */
|
|
|
|
/* EHCI operational registers */
|
|
#define HC_USBCMD 0x020
|
|
#define CMD_LRESET (1 << 7) /* partial reset (no ports, etc) */
|
|
#define CMD_RESET (1 << 1) /* reset HC not bus */
|
|
#define CMD_RUN (1 << 0) /* start/stop HC */
|
|
|
|
#define HC_USBSTS 0x024
|
|
#define STS_PCD (1 << 2) /* port change detect */
|
|
|
|
#define HC_FRINDEX 0x02c
|
|
|
|
#define HC_CONFIGFLAG 0x060
|
|
#define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
|
|
|
|
#define HC_PORTSC1 0x064
|
|
#define PORT_OWNER (1 << 13) /* true: companion hc owns this port */
|
|
#define PORT_POWER (1 << 12) /* true: has power (see PPC) */
|
|
#define PORT_USB11(x) (((x) & (3 << 10)) == (1 << 10)) /* USB 1.1 device */
|
|
#define PORT_RESET (1 << 8) /* reset port */
|
|
#define PORT_SUSPEND (1 << 7) /* suspend port */
|
|
#define PORT_RESUME (1 << 6) /* resume it */
|
|
#define PORT_PE (1 << 2) /* port enable */
|
|
#define PORT_CSC (1 << 1) /* connect status change */
|
|
#define PORT_CONNECT (1 << 0) /* device connected */
|
|
#define PORT_RWC_BITS (PORT_CSC)
|
|
|
|
#define HC_ISO_PTD_DONEMAP_REG 0x130
|
|
#define HC_ISO_PTD_SKIPMAP_REG 0x134
|
|
#define HC_ISO_PTD_LASTPTD_REG 0x138
|
|
#define HC_INT_PTD_DONEMAP_REG 0x140
|
|
#define HC_INT_PTD_SKIPMAP_REG 0x144
|
|
#define HC_INT_PTD_LASTPTD_REG 0x148
|
|
#define HC_ATL_PTD_DONEMAP_REG 0x150
|
|
#define HC_ATL_PTD_SKIPMAP_REG 0x154
|
|
#define HC_ATL_PTD_LASTPTD_REG 0x158
|
|
|
|
/* Configuration Register */
|
|
#define HC_HW_MODE_CTRL 0x300
|
|
#define ALL_ATX_RESET (1 << 31)
|
|
#define HW_ANA_DIGI_OC (1 << 15)
|
|
#define HW_DEV_DMA (1 << 11)
|
|
#define HW_COMN_IRQ (1 << 10)
|
|
#define HW_COMN_DMA (1 << 9)
|
|
#define HW_DATA_BUS_32BIT (1 << 8)
|
|
#define HW_DACK_POL_HIGH (1 << 6)
|
|
#define HW_DREQ_POL_HIGH (1 << 5)
|
|
#define HW_INTR_HIGH_ACT (1 << 2)
|
|
#define HW_INTR_EDGE_TRIG (1 << 1)
|
|
#define HW_GLOBAL_INTR_EN (1 << 0)
|
|
|
|
#define HC_CHIP_ID_REG 0x304
|
|
#define HC_SCRATCH_REG 0x308
|
|
|
|
#define HC_RESET_REG 0x30c
|
|
#define SW_RESET_RESET_HC (1 << 1)
|
|
#define SW_RESET_RESET_ALL (1 << 0)
|
|
|
|
#define HC_BUFFER_STATUS_REG 0x334
|
|
#define ISO_BUF_FILL (1 << 2)
|
|
#define INT_BUF_FILL (1 << 1)
|
|
#define ATL_BUF_FILL (1 << 0)
|
|
|
|
#define HC_MEMORY_REG 0x33c
|
|
#define ISP_BANK(x) ((x) << 16)
|
|
|
|
#define HC_PORT1_CTRL 0x374
|
|
#define PORT1_POWER (3 << 3)
|
|
#define PORT1_INIT1 (1 << 7)
|
|
#define PORT1_INIT2 (1 << 23)
|
|
#define HW_OTG_CTRL_SET 0x374
|
|
#define HW_OTG_CTRL_CLR 0x376
|
|
#define HW_OTG_DISABLE (1 << 10)
|
|
#define HW_OTG_SE0_EN (1 << 9)
|
|
#define HW_BDIS_ACON_EN (1 << 8)
|
|
#define HW_SW_SEL_HC_DC (1 << 7)
|
|
#define HW_VBUS_CHRG (1 << 6)
|
|
#define HW_VBUS_DISCHRG (1 << 5)
|
|
#define HW_VBUS_DRV (1 << 4)
|
|
#define HW_SEL_CP_EXT (1 << 3)
|
|
#define HW_DM_PULLDOWN (1 << 2)
|
|
#define HW_DP_PULLDOWN (1 << 1)
|
|
#define HW_DP_PULLUP (1 << 0)
|
|
|
|
/* Interrupt Register */
|
|
#define HC_INTERRUPT_REG 0x310
|
|
|
|
#define HC_INTERRUPT_ENABLE 0x314
|
|
#define HC_ISO_INT (1 << 9)
|
|
#define HC_ATL_INT (1 << 8)
|
|
#define HC_INTL_INT (1 << 7)
|
|
#define HC_EOT_INT (1 << 3)
|
|
#define HC_SOT_INT (1 << 1)
|
|
#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT)
|
|
|
|
#define HC_ISO_IRQ_MASK_OR_REG 0x318
|
|
#define HC_INT_IRQ_MASK_OR_REG 0x31c
|
|
#define HC_ATL_IRQ_MASK_OR_REG 0x320
|
|
#define HC_ISO_IRQ_MASK_AND_REG 0x324
|
|
#define HC_INT_IRQ_MASK_AND_REG 0x328
|
|
#define HC_ATL_IRQ_MASK_AND_REG 0x32c
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Peripheral Controller
|
|
*/
|
|
|
|
/* Initialization Registers */
|
|
#define DC_ADDRESS 0x0200
|
|
#define DC_DEVEN (1 << 7)
|
|
|
|
#define DC_MODE 0x020c
|
|
#define DC_DMACLKON (1 << 9)
|
|
#define DC_VBUSSTAT (1 << 8)
|
|
#define DC_CLKAON (1 << 7)
|
|
#define DC_SNDRSU (1 << 6)
|
|
#define DC_GOSUSP (1 << 5)
|
|
#define DC_SFRESET (1 << 4)
|
|
#define DC_GLINTENA (1 << 3)
|
|
#define DC_WKUPCS (1 << 2)
|
|
|
|
#define DC_INTCONF 0x0210
|
|
#define DC_CDBGMOD_ACK_NAK (0 << 6)
|
|
#define DC_CDBGMOD_ACK (1 << 6)
|
|
#define DC_CDBGMOD_ACK_1NAK (2 << 6)
|
|
#define DC_DDBGMODIN_ACK_NAK (0 << 4)
|
|
#define DC_DDBGMODIN_ACK (1 << 4)
|
|
#define DC_DDBGMODIN_ACK_1NAK (2 << 4)
|
|
#define DC_DDBGMODOUT_ACK_NYET_NAK (0 << 2)
|
|
#define DC_DDBGMODOUT_ACK_NYET (1 << 2)
|
|
#define DC_DDBGMODOUT_ACK_NYET_1NAK (2 << 2)
|
|
#define DC_INTLVL (1 << 1)
|
|
#define DC_INTPOL (1 << 0)
|
|
|
|
#define DC_DEBUG 0x0212
|
|
#define DC_INTENABLE 0x0214
|
|
#define DC_IEPTX(n) (1 << (11 + 2 * (n)))
|
|
#define DC_IEPRX(n) (1 << (10 + 2 * (n)))
|
|
#define DC_IEPRXTX(n) (3 << (10 + 2 * (n)))
|
|
#define DC_IEP0SETUP (1 << 8)
|
|
#define DC_IEVBUS (1 << 7)
|
|
#define DC_IEDMA (1 << 6)
|
|
#define DC_IEHS_STA (1 << 5)
|
|
#define DC_IERESM (1 << 4)
|
|
#define DC_IESUSP (1 << 3)
|
|
#define DC_IEPSOF (1 << 2)
|
|
#define DC_IESOF (1 << 1)
|
|
#define DC_IEBRST (1 << 0)
|
|
|
|
/* Data Flow Registers */
|
|
#define DC_EPINDEX 0x022c
|
|
#define DC_EP0SETUP (1 << 5)
|
|
#define DC_ENDPIDX(n) ((n) << 1)
|
|
#define DC_EPDIR (1 << 0)
|
|
|
|
#define DC_CTRLFUNC 0x0228
|
|
#define DC_CLBUF (1 << 4)
|
|
#define DC_VENDP (1 << 3)
|
|
#define DC_DSEN (1 << 2)
|
|
#define DC_STATUS (1 << 1)
|
|
#define DC_STALL (1 << 0)
|
|
|
|
#define DC_DATAPORT 0x0220
|
|
#define DC_BUFLEN 0x021c
|
|
#define DC_DATACOUNT_MASK 0xffff
|
|
#define DC_BUFSTAT 0x021e
|
|
#define DC_EPMAXPKTSZ 0x0204
|
|
|
|
#define DC_EPTYPE 0x0208
|
|
#define DC_NOEMPKT (1 << 4)
|
|
#define DC_EPENABLE (1 << 3)
|
|
#define DC_DBLBUF (1 << 2)
|
|
#define DC_ENDPTYP_ISOC (1 << 0)
|
|
#define DC_ENDPTYP_BULK (2 << 0)
|
|
#define DC_ENDPTYP_INTERRUPT (3 << 0)
|
|
|
|
/* DMA Registers */
|
|
#define DC_DMACMD 0x0230
|
|
#define DC_DMATXCOUNT 0x0234
|
|
#define DC_DMACONF 0x0238
|
|
#define DC_DMAHW 0x023c
|
|
#define DC_DMAINTREASON 0x0250
|
|
#define DC_DMAINTEN 0x0254
|
|
#define DC_DMAEP 0x0258
|
|
#define DC_DMABURSTCOUNT 0x0264
|
|
|
|
/* General Registers */
|
|
#define DC_INTERRUPT 0x0218
|
|
#define DC_CHIPID 0x0270
|
|
#define DC_FRAMENUM 0x0274
|
|
#define DC_SCRATCH 0x0278
|
|
#define DC_UNLOCKDEV 0x027c
|
|
#define DC_INTPULSEWIDTH 0x0280
|
|
#define DC_TESTMODE 0x0284
|
|
|
|
#endif
|