![Evan Wang](/assets/img/avatar_default.png)
Marvell armada37xx, armada7k and armada8k share the same AHCI sata controller IP, and currently there is an issue (Errata Ref#226)that the SATA can not be detected via SATA Port-MultiPlayer(PMP). After debugging, the reason is found that the value of Port-x FIS-based Switching Control (PxFBS@0x40) became wrong. According to design, the bits[11:8, 0] of register PxFBS are cleared when Port Command and Status (0x18) bit[0] changes its value from 1 to 0, i.e. falling edge of Port Command and Status bit[0] sends PULSE that resets PxFBS bits[11:8; 0]. So it needs save the port PxFBS register before PxCMD ST write and restore the port PxFBS register afterwards in ahci_stop_engine(). This commit allows drivers to override ahci_stop_engine behavior for use by the Marvell AHCI driver(and potentially other drivers in the future). Signed-off-by: Evan Wang <xswang@marvell.com> Cc: Ofer Heifetz <oferh@marvell.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Tejun Heo <tj@kernel.org>
348 lines
9.3 KiB
C
348 lines
9.3 KiB
C
/*
|
|
* Freescale QorIQ AHCI SATA platform driver
|
|
*
|
|
* Copyright 2015 Freescale, Inc.
|
|
* Tang Yuantian <Yuantian.Tang@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/libata.h>
|
|
#include "ahci.h"
|
|
|
|
#define DRV_NAME "ahci-qoriq"
|
|
|
|
/* port register definition */
|
|
#define PORT_PHY1 0xA8
|
|
#define PORT_PHY2 0xAC
|
|
#define PORT_PHY3 0xB0
|
|
#define PORT_PHY4 0xB4
|
|
#define PORT_PHY5 0xB8
|
|
#define PORT_AXICC 0xBC
|
|
#define PORT_TRANS 0xC8
|
|
|
|
/* port register default value */
|
|
#define AHCI_PORT_PHY_1_CFG 0xa003fffe
|
|
#define AHCI_PORT_PHY2_CFG 0x28184d1f
|
|
#define AHCI_PORT_PHY3_CFG 0x0e081509
|
|
#define AHCI_PORT_TRANS_CFG 0x08000029
|
|
#define AHCI_PORT_AXICC_CFG 0x3fffffff
|
|
|
|
/* for ls1021a */
|
|
#define LS1021A_PORT_PHY2 0x28183414
|
|
#define LS1021A_PORT_PHY3 0x0e080e06
|
|
#define LS1021A_PORT_PHY4 0x064a080b
|
|
#define LS1021A_PORT_PHY5 0x2aa86470
|
|
#define LS1021A_AXICC_ADDR 0xC0
|
|
|
|
#define SATA_ECC_DISABLE 0x00020000
|
|
#define ECC_DIS_ARMV8_CH2 0x80000000
|
|
#define ECC_DIS_LS1088A 0x40000000
|
|
|
|
enum ahci_qoriq_type {
|
|
AHCI_LS1021A,
|
|
AHCI_LS1043A,
|
|
AHCI_LS2080A,
|
|
AHCI_LS1046A,
|
|
AHCI_LS1088A,
|
|
AHCI_LS2088A,
|
|
};
|
|
|
|
struct ahci_qoriq_priv {
|
|
struct ccsr_ahci *reg_base;
|
|
enum ahci_qoriq_type type;
|
|
void __iomem *ecc_addr;
|
|
bool is_dmacoherent;
|
|
};
|
|
|
|
static const struct of_device_id ahci_qoriq_of_match[] = {
|
|
{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
|
|
{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
|
|
{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
|
|
{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
|
|
{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
|
|
{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
|
|
|
|
static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
void __iomem *port_mmio = ahci_port_base(link->ap);
|
|
u32 px_cmd, px_is, px_val;
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
struct ata_taskfile tf;
|
|
bool online;
|
|
int rc;
|
|
bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A);
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
hpriv->stop_engine(ap);
|
|
|
|
/*
|
|
* There is a errata on ls1021a Rev1.0 and Rev2.0 which is:
|
|
* A-009042: The device detection initialization sequence
|
|
* mistakenly resets some registers.
|
|
*
|
|
* Workaround for this is:
|
|
* The software should read and store PxCMD and PxIS values
|
|
* before issuing the device detection initialization sequence.
|
|
* After the sequence is complete, software should restore the
|
|
* PxCMD and PxIS with the stored values.
|
|
*/
|
|
if (ls1021a_workaround) {
|
|
px_cmd = readl(port_mmio + PORT_CMD);
|
|
px_is = readl(port_mmio + PORT_IRQ_STAT);
|
|
}
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = ATA_BUSY;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
|
|
rc = sata_link_hardreset(link, timing, deadline, &online,
|
|
ahci_check_ready);
|
|
|
|
/* restore the PxCMD and PxIS on ls1021 */
|
|
if (ls1021a_workaround) {
|
|
px_val = readl(port_mmio + PORT_CMD);
|
|
if (px_val != px_cmd)
|
|
writel(px_cmd, port_mmio + PORT_CMD);
|
|
|
|
px_val = readl(port_mmio + PORT_IRQ_STAT);
|
|
if (px_val != px_is)
|
|
writel(px_is, port_mmio + PORT_IRQ_STAT);
|
|
}
|
|
|
|
hpriv->start_engine(ap);
|
|
|
|
if (online)
|
|
*class = ahci_dev_classify(ap);
|
|
|
|
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
return rc;
|
|
}
|
|
|
|
static struct ata_port_operations ahci_qoriq_ops = {
|
|
.inherits = &ahci_ops,
|
|
.hardreset = ahci_qoriq_hardreset,
|
|
};
|
|
|
|
static const struct ata_port_info ahci_qoriq_port_info = {
|
|
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_qoriq_ops,
|
|
};
|
|
|
|
static struct scsi_host_template ahci_qoriq_sht = {
|
|
AHCI_SHT(DRV_NAME),
|
|
};
|
|
|
|
static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct ahci_qoriq_priv *qpriv = hpriv->plat_data;
|
|
void __iomem *reg_base = hpriv->mmio;
|
|
|
|
switch (qpriv->type) {
|
|
case AHCI_LS1021A:
|
|
if (!qpriv->ecc_addr)
|
|
return -EINVAL;
|
|
writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
|
|
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
|
|
writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
|
|
writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
|
|
writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
|
|
writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
|
|
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
|
|
if (qpriv->is_dmacoherent)
|
|
writel(AHCI_PORT_AXICC_CFG,
|
|
reg_base + LS1021A_AXICC_ADDR);
|
|
break;
|
|
|
|
case AHCI_LS1043A:
|
|
if (!qpriv->ecc_addr)
|
|
return -EINVAL;
|
|
writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
|
|
qpriv->ecc_addr);
|
|
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
|
|
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
|
|
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
|
|
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
|
|
if (qpriv->is_dmacoherent)
|
|
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
|
|
break;
|
|
|
|
case AHCI_LS2080A:
|
|
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
|
|
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
|
|
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
|
|
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
|
|
if (qpriv->is_dmacoherent)
|
|
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
|
|
break;
|
|
|
|
case AHCI_LS1046A:
|
|
if (!qpriv->ecc_addr)
|
|
return -EINVAL;
|
|
writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
|
|
qpriv->ecc_addr);
|
|
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
|
|
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
|
|
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
|
|
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
|
|
if (qpriv->is_dmacoherent)
|
|
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
|
|
break;
|
|
|
|
case AHCI_LS1088A:
|
|
if (!qpriv->ecc_addr)
|
|
return -EINVAL;
|
|
writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
|
|
qpriv->ecc_addr);
|
|
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
|
|
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
|
|
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
|
|
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
|
|
if (qpriv->is_dmacoherent)
|
|
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
|
|
break;
|
|
|
|
case AHCI_LS2088A:
|
|
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
|
|
writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
|
|
writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
|
|
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
|
|
if (qpriv->is_dmacoherent)
|
|
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_qoriq_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_host_priv *hpriv;
|
|
struct ahci_qoriq_priv *qoriq_priv;
|
|
const struct of_device_id *of_id;
|
|
struct resource *res;
|
|
int rc;
|
|
|
|
hpriv = ahci_platform_get_resources(pdev);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
|
|
of_id = of_match_node(ahci_qoriq_of_match, np);
|
|
if (!of_id)
|
|
return -ENODEV;
|
|
|
|
qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL);
|
|
if (!qoriq_priv)
|
|
return -ENOMEM;
|
|
|
|
qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
"sata-ecc");
|
|
if (res) {
|
|
qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(qoriq_priv->ecc_addr))
|
|
return PTR_ERR(qoriq_priv->ecc_addr);
|
|
}
|
|
qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
|
|
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
hpriv->plat_data = qoriq_priv;
|
|
rc = ahci_qoriq_phy_init(hpriv);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info,
|
|
&ahci_qoriq_sht);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int ahci_qoriq_resume(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
int rc;
|
|
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = ahci_qoriq_phy_init(hpriv);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
rc = ahci_platform_resume_host(dev);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
/* We resumed so update PM runtime state */
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
|
|
return rc;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend,
|
|
ahci_qoriq_resume);
|
|
|
|
static struct platform_driver ahci_qoriq_driver = {
|
|
.probe = ahci_qoriq_probe,
|
|
.remove = ata_platform_remove_one,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = ahci_qoriq_of_match,
|
|
.pm = &ahci_qoriq_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(ahci_qoriq_driver);
|
|
|
|
MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver");
|
|
MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
|
|
MODULE_LICENSE("GPL");
|