redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/ste-u300.dts
Linus Walleij 7fca1f20c0 ARM: u300: switch to using syscon regmap for board 
This switches the code using a local remapping of the
system controller to enable the U300 board to be
self-powered over to making the U300-specific syscon
compatible with the MFD generic syscon driver, selecting
the generic syscon driver, and augmenting the board
power code to pick the regmap and manipulate the syscon
from the regmap side of things.

Cc: Dong Aisheng <dong.aisheng@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 13:54:39 +02:00

474 lines
11 KiB
Plaintext
Raw Blame History

/*
* Device Tree for the ST-Ericsson U300 Machine and SoC
*/
/dts-v1/;
/include/ "skeleton.dtsi"
/ {
model = "ST-Ericsson U300";
compatible = "stericsson,u300";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk";
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
memory {
reg = <0x48000000 0x03c00000>;
};
s365 {
compatible = "stericsson,s365";
vana15-supply = <&ab3100_ldo_d_reg>;
syscon = <&syscon>;
};
syscon: syscon@c0011000 {
compatible = "stericsson,u300-syscon", "syscon";
reg = <0xc0011000 0x1000>;
clk32: app_32_clk@32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
pll13: pll13@13M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
};
/* Slow bridge clocks under PLL13 */
slow_clk: slow_clk@13M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <0>;
clocks = <&pll13>;
};
uart0_clk: uart0_clk@13M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <1>;
clocks = <&slow_clk>;
};
gpio_clk: gpio_clk@13M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <4>;
clocks = <&slow_clk>;
};
rtc_clk: rtc_clk@13M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <6>;
clocks = <&slow_clk>;
};
apptimer_clk: app_tmr_clk@13M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <7>;
clocks = <&slow_clk>;
};
acc_tmr_clk@13M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <8>;
clocks = <&slow_clk>;
};
pll208: pll208@208M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <208000000>;
};
app208: app_208_clk@208M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&pll208>;
};
cpu_clk@208M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <3>;
clocks = <&app208>;
};
app104: app_104_clk@104M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&pll208>;
};
semi_clk@104M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <9>;
clocks = <&app104>;
};
app52: app_52_clk@52M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
clock-mult = <1>;
clocks = <&pll208>;
};
/* AHB subsystem clocks */
ahb_clk: ahb_subsys_clk@52M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <10>;
clocks = <&app52>;
};
intcon_clk@52M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <12>;
clocks = <&ahb_clk>;
};
emif_clk@52M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <5>;
clocks = <&ahb_clk>;
};
dmac_clk: dmac_clk@52M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <4>;
clocks = <&app52>;
};
fsmc_clk: fsmc_clk@52M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <6>;
clocks = <&app52>;
};
xgam_clk: xgam_clk@52M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <8>;
clocks = <&app52>;
};
app26: app_26_clk@26M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&app52>;
};
/* Fast bridge clocks */
fast_clk: fast_clk@26M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <0>;
clocks = <&app26>;
};
i2c0_clk: i2c0_clk@26M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <1>;
clocks = <&fast_clk>;
};
i2c1_clk: i2c1_clk@26M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <2>;
clocks = <&fast_clk>;
};
mmc_pclk: mmc_p_clk@26M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <5>;
clocks = <&fast_clk>;
};
mmc_mclk: mmc_mclk {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-mclk";
clocks = <&mmc_pclk>;
};
spi_clk: spi_p_clk@26M {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <6>;
clocks = <&fast_clk>;
};
};
timer: timer@c0014000 {
compatible = "stericsson,u300-apptimer";
reg = <0xc0014000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <24 25 26 27>;
clocks = <&apptimer_clk>;
};
gpio: gpio@c0016000 {
compatible = "stericsson,gpio-coh901";
reg = <0xc0016000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <0 1 2 18 21 22 23>;
clocks = <&gpio_clk>;
interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3",
"gpio4", "gpio5", "gpio6";
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
pinctrl: pinctrl@c0011000 {
compatible = "stericsson,pinctrl-u300";
reg = <0xc0011000 0x1000>;
};
watchdog: watchdog@c0012000 {
compatible = "stericsson,coh901327";
reg = <0xc0012000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <3>;
clocks = <&clk32>;
};
rtc: rtc@c0017000 {
compatible = "stericsson,coh901331";
reg = <0xc0017000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <10>;
clocks = <&rtc_clk>;
};
dmac: dma-controller@c00020000 {
compatible = "stericsson,coh901318";
reg = <0xc0020000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <2>;
#dma-cells = <1>;
dma-channels = <40>;
clocks = <&dmac_clk>;
};
/* A NAND flash of 128 MiB */
fsmc: flash@40000000 {
compatible = "stericsson,fsmc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x9f800000 0x1000>, /* FSMC Register*/
<0x80000000 0x4000>, /* NAND Base DATA */
<0x80020000 0x4000>, /* NAND Base ADDR */
<0x80010000 0x4000>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
nand-skip-bbtscan;
clocks = <&fsmc_clk>;
partition@0 {
label = "boot records";
reg = <0x0 0x20000>;
};
partition@20000 {
label = "free";
reg = <0x20000 0x7e0000>;
};
partition@800000 {
label = "platform";
reg = <0x800000 0xf800000>;
};
};
i2c0: i2c@c0004000 {
compatible = "st,ddci2c";
reg = <0xc0004000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <8>;
clocks = <&i2c0_clk>;
#address-cells = <1>;
#size-cells = <0>;
ab3100: ab3100@0x48 {
compatible = "stericsson,ab3100";
reg = <0x48>;
interrupt-parent = <&vica>;
interrupts = <0>; /* EXT0 IRQ */
ab3100-regulators {
compatible = "stericsson,ab3100-regulators";
ab3100_ldo_a_reg: ab3100_ldo_a {
regulator-compatible = "ab3100_ldo_a";
startup-delay-us = <200>;
regulator-always-on;
regulator-boot-on;
};
ab3100_ldo_c_reg: ab3100_ldo_c {
regulator-compatible = "ab3100_ldo_c";
startup-delay-us = <200>;
};
ab3100_ldo_d_reg: ab3100_ldo_d {
regulator-compatible = "ab3100_ldo_d";
startup-delay-us = <200>;
};
ab3100_ldo_e_reg: ab3100_ldo_e {
regulator-compatible = "ab3100_ldo_e";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <200>;
regulator-always-on;
regulator-boot-on;
};
ab3100_ldo_f_reg: ab3100_ldo_f {
regulator-compatible = "ab3100_ldo_f";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
startup-delay-us = <600>;
regulator-always-on;
regulator-boot-on;
};
ab3100_ldo_g_reg: ab3100_ldo_g {
regulator-compatible = "ab3100_ldo_g";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2850000>;
startup-delay-us = <400>;
};
ab3100_ldo_h_reg: ab3100_ldo_h {
regulator-compatible = "ab3100_ldo_h";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2750000>;
startup-delay-us = <200>;
};
ab3100_ldo_k_reg: ab3100_ldo_k {
regulator-compatible = "ab3100_ldo_k";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2750000>;
startup-delay-us = <200>;
};
ab3100_ext_reg: ab3100_ext {
regulator-compatible = "ab3100_ext";
};
ab3100_buck_reg: ab3100_buck {
regulator-compatible = "ab3100_buck";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <1000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
i2c1: i2c@c0005000 {
compatible = "st,ddci2c";
reg = <0xc0005000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <9>;
clocks = <&i2c1_clk>;
#address-cells = <1>;
#size-cells = <0>;
fwcam0: fwcam@0x10 {
reg = <0x10>;
};
fwcam1: fwcam@0x5d {
reg = <0x5d>;
};
};
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
vica: interrupt-controller@a0001000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xa0001000 0x20>;
};
vicb: interrupt-controller@a0002000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xa0002000 0x20>;
};
uart0: serial@c0013000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xc0013000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <22>;
clocks = <&uart0_clk>, <&uart0_clk>;
clock-names = "apb_pclk", "uart0_clk";
dmas = <&dmac 17 &dmac 18>;
dma-names = "tx", "rx";
};
uart1: serial@c0007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xc0007000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <20>;
dmas = <&dmac 38 &dmac 39>;
dma-names = "tx", "rx";
};
mmcsd: mmcsd@c0001000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0xc0001000 0x1000>;
interrupt-parent = <&vicb>;
interrupts = <6 7>;
clocks = <&mmc_pclk>, <&mmc_mclk>;
clock-names = "apb_pclk", "mclk";
max-frequency = <24000000>;
bus-width = <4>; // SD-card slot
mmc-cap-mmc-highspeed;
mmc-cap-sd-highspeed;
cd-gpios = <&gpio 12 0x4>;
cd-inverted;
vmmc-supply = <&ab3100_ldo_g_reg>;
dmas = <&dmac 14>;
dma-names = "rx";
};
spi: ssp@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
interrupts = <23>;
clocks = <&spi_clk>, <&spi_clk>;
clock-names = "apb_pclk", "spi_clk";
dmas = <&dmac 27 &dmac 28>;
dma-names = "tx", "rx";
num-cs = <3>;
#address-cells = <1>;
#size-cells = <0>;
spi-dummy@1 {
compatible = "arm,pl022-dummy";
reg = <1>;
spi-max-frequency = <20000000>;
};
};
};
};
View git blame Copy permalink