alistair23-linux/arch/arm/boot/dts/exynos5440-ssdk5440.dts
Javier Martinez Canillas df829b06f0 ARM: dts: Use GPIO constants for flags cells in exynos5440 boards
The board DTS are using numeric values instead of the defined GPIO
constanst to express polarity, use them to make the DTS more clear.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-10-08 07:39:58 +09:00

79 lines
1.5 KiB
Plaintext

/*
* SAMSUNG SSDK5440 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5440.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
chosen {
bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
};
fixed-rate-clocks {
xtal {
compatible = "samsung,clock-xtal";
clock-frequency = <50000000>;
};
};
};
&pcie_0 {
reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie_1 {
reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&spi_0 {
flash: w25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q128";
spi-max-frequency = <15625000>;
reg = <0>;
controller-data {
samsung,spi-feedback-delay = <0>;
};
partition@00000 {
label = "BootLoader";
reg = <0x60000 0x80000>;
read-only;
};
partition@e0000 {
label = "Recovery-Kernel";
reg = <0xe0000 0x300000>;
read-only;
};
partition@3e0000 {
label = "CRAM-FS";
reg = <0x3e0000 0x700000>;
read-only;
};
partition@ae0000 {
label = "User-Data";
reg = <0xae0000 0x520000>;
};
};
};