![Rafael J. Wysocki](/assets/img/avatar_default.png)
* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
1457 lines
36 KiB
C
1457 lines
36 KiB
C
/*
|
|
* 3-axis accelerometer driver supporting following Bosch-Sensortec chips:
|
|
* - BMC150
|
|
* - BMI055
|
|
* - BMA255
|
|
* - BMA250E
|
|
* - BMA222E
|
|
* - BMA280
|
|
*
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#define BMC150_ACCEL_DRV_NAME "bmc150_accel"
|
|
#define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event"
|
|
#define BMC150_ACCEL_GPIO_NAME "bmc150_accel_int"
|
|
|
|
#define BMC150_ACCEL_REG_CHIP_ID 0x00
|
|
|
|
#define BMC150_ACCEL_REG_INT_STATUS_2 0x0B
|
|
#define BMC150_ACCEL_ANY_MOTION_MASK 0x07
|
|
#define BMC150_ACCEL_ANY_MOTION_BIT_X BIT(0)
|
|
#define BMC150_ACCEL_ANY_MOTION_BIT_Y BIT(1)
|
|
#define BMC150_ACCEL_ANY_MOTION_BIT_Z BIT(2)
|
|
#define BMC150_ACCEL_ANY_MOTION_BIT_SIGN BIT(3)
|
|
|
|
#define BMC150_ACCEL_REG_PMU_LPW 0x11
|
|
#define BMC150_ACCEL_PMU_MODE_MASK 0xE0
|
|
#define BMC150_ACCEL_PMU_MODE_SHIFT 5
|
|
#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_MASK 0x17
|
|
#define BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT 1
|
|
|
|
#define BMC150_ACCEL_REG_PMU_RANGE 0x0F
|
|
|
|
#define BMC150_ACCEL_DEF_RANGE_2G 0x03
|
|
#define BMC150_ACCEL_DEF_RANGE_4G 0x05
|
|
#define BMC150_ACCEL_DEF_RANGE_8G 0x08
|
|
#define BMC150_ACCEL_DEF_RANGE_16G 0x0C
|
|
|
|
/* Default BW: 125Hz */
|
|
#define BMC150_ACCEL_REG_PMU_BW 0x10
|
|
#define BMC150_ACCEL_DEF_BW 125
|
|
|
|
#define BMC150_ACCEL_REG_INT_MAP_0 0x19
|
|
#define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2)
|
|
|
|
#define BMC150_ACCEL_REG_INT_MAP_1 0x1A
|
|
#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0)
|
|
|
|
#define BMC150_ACCEL_REG_INT_RST_LATCH 0x21
|
|
#define BMC150_ACCEL_INT_MODE_LATCH_RESET 0x80
|
|
#define BMC150_ACCEL_INT_MODE_LATCH_INT 0x0F
|
|
#define BMC150_ACCEL_INT_MODE_NON_LATCH_INT 0x00
|
|
|
|
#define BMC150_ACCEL_REG_INT_EN_0 0x16
|
|
#define BMC150_ACCEL_INT_EN_BIT_SLP_X BIT(0)
|
|
#define BMC150_ACCEL_INT_EN_BIT_SLP_Y BIT(1)
|
|
#define BMC150_ACCEL_INT_EN_BIT_SLP_Z BIT(2)
|
|
|
|
#define BMC150_ACCEL_REG_INT_EN_1 0x17
|
|
#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4)
|
|
|
|
#define BMC150_ACCEL_REG_INT_OUT_CTRL 0x20
|
|
#define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL BIT(0)
|
|
|
|
#define BMC150_ACCEL_REG_INT_5 0x27
|
|
#define BMC150_ACCEL_SLOPE_DUR_MASK 0x03
|
|
|
|
#define BMC150_ACCEL_REG_INT_6 0x28
|
|
#define BMC150_ACCEL_SLOPE_THRES_MASK 0xFF
|
|
|
|
/* Slope duration in terms of number of samples */
|
|
#define BMC150_ACCEL_DEF_SLOPE_DURATION 1
|
|
/* in terms of multiples of g's/LSB, based on range */
|
|
#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 1
|
|
|
|
#define BMC150_ACCEL_REG_XOUT_L 0x02
|
|
|
|
#define BMC150_ACCEL_MAX_STARTUP_TIME_MS 100
|
|
|
|
/* Sleep Duration values */
|
|
#define BMC150_ACCEL_SLEEP_500_MICRO 0x05
|
|
#define BMC150_ACCEL_SLEEP_1_MS 0x06
|
|
#define BMC150_ACCEL_SLEEP_2_MS 0x07
|
|
#define BMC150_ACCEL_SLEEP_4_MS 0x08
|
|
#define BMC150_ACCEL_SLEEP_6_MS 0x09
|
|
#define BMC150_ACCEL_SLEEP_10_MS 0x0A
|
|
#define BMC150_ACCEL_SLEEP_25_MS 0x0B
|
|
#define BMC150_ACCEL_SLEEP_50_MS 0x0C
|
|
#define BMC150_ACCEL_SLEEP_100_MS 0x0D
|
|
#define BMC150_ACCEL_SLEEP_500_MS 0x0E
|
|
#define BMC150_ACCEL_SLEEP_1_SEC 0x0F
|
|
|
|
#define BMC150_ACCEL_REG_TEMP 0x08
|
|
#define BMC150_ACCEL_TEMP_CENTER_VAL 24
|
|
|
|
#define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2))
|
|
#define BMC150_AUTO_SUSPEND_DELAY_MS 2000
|
|
|
|
enum bmc150_accel_axis {
|
|
AXIS_X,
|
|
AXIS_Y,
|
|
AXIS_Z,
|
|
};
|
|
|
|
enum bmc150_power_modes {
|
|
BMC150_ACCEL_SLEEP_MODE_NORMAL,
|
|
BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND,
|
|
BMC150_ACCEL_SLEEP_MODE_LPM,
|
|
BMC150_ACCEL_SLEEP_MODE_SUSPEND = 0x04,
|
|
};
|
|
|
|
struct bmc150_scale_info {
|
|
int scale;
|
|
u8 reg_range;
|
|
};
|
|
|
|
struct bmc150_accel_chip_info {
|
|
u8 chip_id;
|
|
const struct iio_chan_spec *channels;
|
|
int num_channels;
|
|
const struct bmc150_scale_info scale_table[4];
|
|
};
|
|
|
|
struct bmc150_accel_data {
|
|
struct i2c_client *client;
|
|
struct iio_trigger *dready_trig;
|
|
struct iio_trigger *motion_trig;
|
|
struct mutex mutex;
|
|
s16 buffer[8];
|
|
u8 bw_bits;
|
|
u32 slope_dur;
|
|
u32 slope_thres;
|
|
u32 range;
|
|
int ev_enable_state;
|
|
bool dready_trigger_on;
|
|
bool motion_trigger_on;
|
|
int64_t timestamp;
|
|
const struct bmc150_accel_chip_info *chip_info;
|
|
};
|
|
|
|
static const struct {
|
|
int val;
|
|
int val2;
|
|
u8 bw_bits;
|
|
} bmc150_accel_samp_freq_table[] = { {7, 810000, 0x08},
|
|
{15, 630000, 0x09},
|
|
{31, 250000, 0x0A},
|
|
{62, 500000, 0x0B},
|
|
{125, 0, 0x0C},
|
|
{250, 0, 0x0D},
|
|
{500, 0, 0x0E},
|
|
{1000, 0, 0x0F} };
|
|
|
|
static const struct {
|
|
int bw_bits;
|
|
int msec;
|
|
} bmc150_accel_sample_upd_time[] = { {0x08, 64},
|
|
{0x09, 32},
|
|
{0x0A, 16},
|
|
{0x0B, 8},
|
|
{0x0C, 4},
|
|
{0x0D, 2},
|
|
{0x0E, 1},
|
|
{0x0F, 1} };
|
|
|
|
static const struct {
|
|
int sleep_dur;
|
|
u8 reg_value;
|
|
} bmc150_accel_sleep_value_table[] = { {0, 0},
|
|
{500, BMC150_ACCEL_SLEEP_500_MICRO},
|
|
{1000, BMC150_ACCEL_SLEEP_1_MS},
|
|
{2000, BMC150_ACCEL_SLEEP_2_MS},
|
|
{4000, BMC150_ACCEL_SLEEP_4_MS},
|
|
{6000, BMC150_ACCEL_SLEEP_6_MS},
|
|
{10000, BMC150_ACCEL_SLEEP_10_MS},
|
|
{25000, BMC150_ACCEL_SLEEP_25_MS},
|
|
{50000, BMC150_ACCEL_SLEEP_50_MS},
|
|
{100000, BMC150_ACCEL_SLEEP_100_MS},
|
|
{500000, BMC150_ACCEL_SLEEP_500_MS},
|
|
{1000000, BMC150_ACCEL_SLEEP_1_SEC} };
|
|
|
|
|
|
static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
|
|
enum bmc150_power_modes mode,
|
|
int dur_us)
|
|
{
|
|
int i;
|
|
int ret;
|
|
u8 lpw_bits;
|
|
int dur_val = -1;
|
|
|
|
if (dur_us > 0) {
|
|
for (i = 0; i < ARRAY_SIZE(bmc150_accel_sleep_value_table);
|
|
++i) {
|
|
if (bmc150_accel_sleep_value_table[i].sleep_dur ==
|
|
dur_us)
|
|
dur_val =
|
|
bmc150_accel_sleep_value_table[i].reg_value;
|
|
}
|
|
} else
|
|
dur_val = 0;
|
|
|
|
if (dur_val < 0)
|
|
return -EINVAL;
|
|
|
|
lpw_bits = mode << BMC150_ACCEL_PMU_MODE_SHIFT;
|
|
lpw_bits |= (dur_val << BMC150_ACCEL_PMU_BIT_SLEEP_DUR_SHIFT);
|
|
|
|
dev_dbg(&data->client->dev, "Set Mode bits %x\n", lpw_bits);
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_PMU_LPW, lpw_bits);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val,
|
|
int val2)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) {
|
|
if (bmc150_accel_samp_freq_table[i].val == val &&
|
|
bmc150_accel_samp_freq_table[i].val2 == val2) {
|
|
ret = i2c_smbus_write_byte_data(
|
|
data->client,
|
|
BMC150_ACCEL_REG_PMU_BW,
|
|
bmc150_accel_samp_freq_table[i].bw_bits);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->bw_bits =
|
|
bmc150_accel_samp_freq_table[i].bw_bits;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error: Reading chip id\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(&data->client->dev, "Chip Id %x\n", ret);
|
|
if (ret != data->chip_info->chip_id) {
|
|
dev_err(&data->client->dev, "Invalid chip %x\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set Bandwidth */
|
|
ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set Default Range */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_PMU_RANGE,
|
|
BMC150_ACCEL_DEF_RANGE_4G);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_pmu_range\n");
|
|
return ret;
|
|
}
|
|
|
|
data->range = BMC150_ACCEL_DEF_RANGE_4G;
|
|
|
|
/* Set default slope duration */
|
|
ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_5);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_5\n");
|
|
return ret;
|
|
}
|
|
data->slope_dur |= BMC150_ACCEL_DEF_SLOPE_DURATION;
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_5,
|
|
data->slope_dur);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_5\n");
|
|
return ret;
|
|
}
|
|
dev_dbg(&data->client->dev, "slope_dur %x\n", data->slope_dur);
|
|
|
|
/* Set default slope thresholds */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_6,
|
|
BMC150_ACCEL_DEF_SLOPE_THRESHOLD);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_6\n");
|
|
return ret;
|
|
}
|
|
data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD;
|
|
dev_dbg(&data->client->dev, "slope_thres %x\n", data->slope_thres);
|
|
|
|
/* Set default as latched interrupts */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_RST_LATCH,
|
|
BMC150_ACCEL_INT_MODE_LATCH_INT |
|
|
BMC150_ACCEL_INT_MODE_LATCH_RESET);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_int_rst_latch\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_setup_any_motion_interrupt(
|
|
struct bmc150_accel_data *data,
|
|
bool status)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable/Disable INT1 mapping */
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_MAP_0);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_map_0\n");
|
|
return ret;
|
|
}
|
|
if (status)
|
|
ret |= BMC150_ACCEL_INT_MAP_0_BIT_SLOPE;
|
|
else
|
|
ret &= ~BMC150_ACCEL_INT_MAP_0_BIT_SLOPE;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_MAP_0,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_map_0\n");
|
|
return ret;
|
|
}
|
|
|
|
if (status) {
|
|
/* Set slope duration (no of samples) */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_5,
|
|
data->slope_dur);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error write reg_int_5\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Set slope thresholds */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_6,
|
|
data->slope_thres);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error write reg_int_6\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* New data interrupt is always non-latched,
|
|
* which will have higher priority, so no need
|
|
* to set latched mode, we will be flooded anyway with INTR
|
|
*/
|
|
if (!data->dready_trigger_on) {
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_RST_LATCH,
|
|
BMC150_ACCEL_INT_MODE_LATCH_INT |
|
|
BMC150_ACCEL_INT_MODE_LATCH_RESET);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_int_rst_latch\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_EN_0,
|
|
BMC150_ACCEL_INT_EN_BIT_SLP_X |
|
|
BMC150_ACCEL_INT_EN_BIT_SLP_Y |
|
|
BMC150_ACCEL_INT_EN_BIT_SLP_Z);
|
|
} else
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_EN_0,
|
|
0);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_en_0\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_setup_new_data_interrupt(struct bmc150_accel_data *data,
|
|
bool status)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable/Disable INT1 mapping */
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_MAP_1);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_map_1\n");
|
|
return ret;
|
|
}
|
|
if (status)
|
|
ret |= BMC150_ACCEL_INT_MAP_1_BIT_DATA;
|
|
else
|
|
ret &= ~BMC150_ACCEL_INT_MAP_1_BIT_DATA;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_MAP_1,
|
|
ret);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_map_1\n");
|
|
return ret;
|
|
}
|
|
|
|
if (status) {
|
|
/*
|
|
* Set non latched mode interrupt and clear any latched
|
|
* interrupt
|
|
*/
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_RST_LATCH,
|
|
BMC150_ACCEL_INT_MODE_NON_LATCH_INT |
|
|
BMC150_ACCEL_INT_MODE_LATCH_RESET);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_int_rst_latch\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_EN_1,
|
|
BMC150_ACCEL_INT_EN_BIT_DATA_EN);
|
|
|
|
} else {
|
|
/* Restore default interrupt mode */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_RST_LATCH,
|
|
BMC150_ACCEL_INT_MODE_LATCH_INT |
|
|
BMC150_ACCEL_INT_MODE_LATCH_RESET);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_int_rst_latch\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_EN_1,
|
|
0);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error writing reg_int_en_1\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val,
|
|
int *val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) {
|
|
if (bmc150_accel_samp_freq_table[i].bw_bits == data->bw_bits) {
|
|
*val = bmc150_accel_samp_freq_table[i].val;
|
|
*val2 = bmc150_accel_samp_freq_table[i].val2;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bmc150_accel_sample_upd_time); ++i) {
|
|
if (bmc150_accel_sample_upd_time[i].bw_bits == data->bw_bits)
|
|
return bmc150_accel_sample_upd_time[i].msec;
|
|
}
|
|
|
|
return BMC150_ACCEL_MAX_STARTUP_TIME_MS;
|
|
}
|
|
|
|
static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
|
|
{
|
|
int ret;
|
|
|
|
if (on)
|
|
ret = pm_runtime_get_sync(&data->client->dev);
|
|
else {
|
|
pm_runtime_mark_last_busy(&data->client->dev);
|
|
ret = pm_runtime_put_autosuspend(&data->client->dev);
|
|
}
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Failed: bmc150_accel_set_power_state for %d\n", on);
|
|
if (on)
|
|
pm_runtime_put_noidle(&data->client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val)
|
|
{
|
|
int ret, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(data->chip_info->scale_table); ++i) {
|
|
if (data->chip_info->scale_table[i].scale == val) {
|
|
ret = i2c_smbus_write_byte_data(
|
|
data->client,
|
|
BMC150_ACCEL_REG_PMU_RANGE,
|
|
data->chip_info->scale_table[i].reg_range);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing pmu_range\n");
|
|
return ret;
|
|
}
|
|
|
|
data->range = data->chip_info->scale_table[i].reg_range;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int bmc150_accel_get_temp(struct bmc150_accel_data *data, int *val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_TEMP);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_temp\n");
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
*val = sign_extend32(ret, 7);
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int bmc150_accel_get_axis(struct bmc150_accel_data *data,
|
|
struct iio_chan_spec const *chan,
|
|
int *val)
|
|
{
|
|
int ret;
|
|
int axis = chan->scan_index;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = bmc150_accel_set_power_state(data, true);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_smbus_read_word_data(data->client,
|
|
BMC150_ACCEL_AXIS_TO_REG(axis));
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading axis %d\n", axis);
|
|
bmc150_accel_set_power_state(data, false);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
*val = sign_extend32(ret >> chan->scan_type.shift,
|
|
chan->scan_type.realbits - 1);
|
|
ret = bmc150_accel_set_power_state(data, false);
|
|
mutex_unlock(&data->mutex);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int bmc150_accel_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
switch (chan->type) {
|
|
case IIO_TEMP:
|
|
return bmc150_accel_get_temp(data, val);
|
|
case IIO_ACCEL:
|
|
if (iio_buffer_enabled(indio_dev))
|
|
return -EBUSY;
|
|
else
|
|
return bmc150_accel_get_axis(data, chan, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
if (chan->type == IIO_TEMP) {
|
|
*val = BMC150_ACCEL_TEMP_CENTER_VAL;
|
|
return IIO_VAL_INT;
|
|
} else
|
|
return -EINVAL;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
switch (chan->type) {
|
|
case IIO_TEMP:
|
|
*val2 = 500000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_ACCEL:
|
|
{
|
|
int i;
|
|
const struct bmc150_scale_info *si;
|
|
int st_size = ARRAY_SIZE(data->chip_info->scale_table);
|
|
|
|
for (i = 0; i < st_size; ++i) {
|
|
si = &data->chip_info->scale_table[i];
|
|
if (si->reg_range == data->range) {
|
|
*val2 = si->scale;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
mutex_lock(&data->mutex);
|
|
ret = bmc150_accel_get_bw(data, val, val2);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int bmc150_accel_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
mutex_lock(&data->mutex);
|
|
ret = bmc150_accel_set_bw(data, val, val2);
|
|
mutex_unlock(&data->mutex);
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (val)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = bmc150_accel_set_scale(data, val2);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bmc150_accel_read_event(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int *val, int *val2)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
*val2 = 0;
|
|
switch (info) {
|
|
case IIO_EV_INFO_VALUE:
|
|
*val = data->slope_thres;
|
|
break;
|
|
case IIO_EV_INFO_PERIOD:
|
|
*val = data->slope_dur & BMC150_ACCEL_SLOPE_DUR_MASK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int bmc150_accel_write_event(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
enum iio_event_info info,
|
|
int val, int val2)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
if (data->ev_enable_state)
|
|
return -EBUSY;
|
|
|
|
switch (info) {
|
|
case IIO_EV_INFO_VALUE:
|
|
data->slope_thres = val;
|
|
break;
|
|
case IIO_EV_INFO_PERIOD:
|
|
data->slope_dur &= ~BMC150_ACCEL_SLOPE_DUR_MASK;
|
|
data->slope_dur |= val & BMC150_ACCEL_SLOPE_DUR_MASK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
return data->ev_enable_state;
|
|
}
|
|
|
|
static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
int state)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (state && data->ev_enable_state)
|
|
return 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (!state && data->motion_trigger_on) {
|
|
data->ev_enable_state = 0;
|
|
mutex_unlock(&data->mutex);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We will expect the enable and disable to do operation in
|
|
* in reverse order. This will happen here anyway as our
|
|
* resume operation uses sync mode runtime pm calls, the
|
|
* suspend operation will be delayed by autosuspend delay
|
|
* So the disable operation will still happen in reverse of
|
|
* enable operation. When runtime pm is disabled the mode
|
|
* is always on so sequence doesn't matter
|
|
*/
|
|
|
|
ret = bmc150_accel_set_power_state(data, state);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = bmc150_accel_setup_any_motion_interrupt(data, state);
|
|
if (ret < 0) {
|
|
bmc150_accel_set_power_state(data, false);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
data->ev_enable_state = state;
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev,
|
|
struct iio_trigger *trig)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
if (data->dready_trig != trig && data->motion_trig != trig)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
|
|
"7.810000 15.630000 31.250000 62.500000 125 250 500 1000");
|
|
|
|
static struct attribute *bmc150_accel_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group bmc150_accel_attrs_group = {
|
|
.attrs = bmc150_accel_attributes,
|
|
};
|
|
|
|
static const struct iio_event_spec bmc150_accel_event = {
|
|
.type = IIO_EV_TYPE_ROC,
|
|
.dir = IIO_EV_DIR_EITHER,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE) |
|
|
BIT(IIO_EV_INFO_PERIOD)
|
|
};
|
|
|
|
#define BMC150_ACCEL_CHANNEL(_axis, bits) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##_axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.scan_index = AXIS_##_axis, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = (bits), \
|
|
.storagebits = 16, \
|
|
.shift = 16 - (bits), \
|
|
}, \
|
|
.event_spec = &bmc150_accel_event, \
|
|
.num_event_specs = 1 \
|
|
}
|
|
|
|
#define BMC150_ACCEL_CHANNELS(bits) { \
|
|
{ \
|
|
.type = IIO_TEMP, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.scan_index = -1, \
|
|
}, \
|
|
BMC150_ACCEL_CHANNEL(X, bits), \
|
|
BMC150_ACCEL_CHANNEL(Y, bits), \
|
|
BMC150_ACCEL_CHANNEL(Z, bits), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(3), \
|
|
}
|
|
|
|
static const struct iio_chan_spec bma222e_accel_channels[] =
|
|
BMC150_ACCEL_CHANNELS(8);
|
|
static const struct iio_chan_spec bma250e_accel_channels[] =
|
|
BMC150_ACCEL_CHANNELS(10);
|
|
static const struct iio_chan_spec bmc150_accel_channels[] =
|
|
BMC150_ACCEL_CHANNELS(12);
|
|
static const struct iio_chan_spec bma280_accel_channels[] =
|
|
BMC150_ACCEL_CHANNELS(14);
|
|
|
|
enum {
|
|
bmc150,
|
|
bmi055,
|
|
bma255,
|
|
bma250e,
|
|
bma222e,
|
|
bma280,
|
|
};
|
|
|
|
static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
|
|
[bmc150] = {
|
|
.chip_id = 0xFA,
|
|
.channels = bmc150_accel_channels,
|
|
.num_channels = ARRAY_SIZE(bmc150_accel_channels),
|
|
.scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
|
|
{19122, BMC150_ACCEL_DEF_RANGE_4G},
|
|
{38344, BMC150_ACCEL_DEF_RANGE_8G},
|
|
{76590, BMC150_ACCEL_DEF_RANGE_16G} },
|
|
},
|
|
[bmi055] = {
|
|
.chip_id = 0xFA,
|
|
.channels = bmc150_accel_channels,
|
|
.num_channels = ARRAY_SIZE(bmc150_accel_channels),
|
|
.scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
|
|
{19122, BMC150_ACCEL_DEF_RANGE_4G},
|
|
{38344, BMC150_ACCEL_DEF_RANGE_8G},
|
|
{76590, BMC150_ACCEL_DEF_RANGE_16G} },
|
|
},
|
|
[bma255] = {
|
|
.chip_id = 0xFA,
|
|
.channels = bmc150_accel_channels,
|
|
.num_channels = ARRAY_SIZE(bmc150_accel_channels),
|
|
.scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
|
|
{19122, BMC150_ACCEL_DEF_RANGE_4G},
|
|
{38344, BMC150_ACCEL_DEF_RANGE_8G},
|
|
{76590, BMC150_ACCEL_DEF_RANGE_16G} },
|
|
},
|
|
[bma250e] = {
|
|
.chip_id = 0xF9,
|
|
.channels = bma250e_accel_channels,
|
|
.num_channels = ARRAY_SIZE(bma250e_accel_channels),
|
|
.scale_table = { {38344, BMC150_ACCEL_DEF_RANGE_2G},
|
|
{76590, BMC150_ACCEL_DEF_RANGE_4G},
|
|
{153277, BMC150_ACCEL_DEF_RANGE_8G},
|
|
{306457, BMC150_ACCEL_DEF_RANGE_16G} },
|
|
},
|
|
[bma222e] = {
|
|
.chip_id = 0xF8,
|
|
.channels = bma222e_accel_channels,
|
|
.num_channels = ARRAY_SIZE(bma222e_accel_channels),
|
|
.scale_table = { {153277, BMC150_ACCEL_DEF_RANGE_2G},
|
|
{306457, BMC150_ACCEL_DEF_RANGE_4G},
|
|
{612915, BMC150_ACCEL_DEF_RANGE_8G},
|
|
{1225831, BMC150_ACCEL_DEF_RANGE_16G} },
|
|
},
|
|
[bma280] = {
|
|
.chip_id = 0xFB,
|
|
.channels = bma280_accel_channels,
|
|
.num_channels = ARRAY_SIZE(bma280_accel_channels),
|
|
.scale_table = { {2392, BMC150_ACCEL_DEF_RANGE_2G},
|
|
{4785, BMC150_ACCEL_DEF_RANGE_4G},
|
|
{9581, BMC150_ACCEL_DEF_RANGE_8G},
|
|
{19152, BMC150_ACCEL_DEF_RANGE_16G} },
|
|
},
|
|
};
|
|
|
|
static const struct iio_info bmc150_accel_info = {
|
|
.attrs = &bmc150_accel_attrs_group,
|
|
.read_raw = bmc150_accel_read_raw,
|
|
.write_raw = bmc150_accel_write_raw,
|
|
.read_event_value = bmc150_accel_read_event,
|
|
.write_event_value = bmc150_accel_write_event,
|
|
.write_event_config = bmc150_accel_write_event_config,
|
|
.read_event_config = bmc150_accel_read_event_config,
|
|
.validate_trigger = bmc150_accel_validate_trigger,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int bit, ret, i = 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
for_each_set_bit(bit, indio_dev->buffer->scan_mask,
|
|
indio_dev->masklength) {
|
|
ret = i2c_smbus_read_word_data(data->client,
|
|
BMC150_ACCEL_AXIS_TO_REG(bit));
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
goto err_read;
|
|
}
|
|
data->buffer[i++] = ret;
|
|
}
|
|
mutex_unlock(&data->mutex);
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
|
|
data->timestamp);
|
|
err_read:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bmc150_accel_trig_try_reen(struct iio_trigger *trig)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
/* new data interrupts don't need ack */
|
|
if (data->dready_trigger_on)
|
|
return 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
/* clear any latched interrupt */
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_RST_LATCH,
|
|
BMC150_ACCEL_INT_MODE_LATCH_INT |
|
|
BMC150_ACCEL_INT_MODE_LATCH_RESET);
|
|
mutex_unlock(&data->mutex);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"Error writing reg_int_rst_latch\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (!state && data->ev_enable_state && data->motion_trigger_on) {
|
|
data->motion_trigger_on = false;
|
|
mutex_unlock(&data->mutex);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Refer to comment in bmc150_accel_write_event_config for
|
|
* enable/disable operation order
|
|
*/
|
|
ret = bmc150_accel_set_power_state(data, state);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
if (data->motion_trig == trig)
|
|
ret = bmc150_accel_setup_any_motion_interrupt(data, state);
|
|
else
|
|
ret = bmc150_accel_setup_new_data_interrupt(data, state);
|
|
if (ret < 0) {
|
|
bmc150_accel_set_power_state(data, false);
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
if (data->motion_trig == trig)
|
|
data->motion_trigger_on = state;
|
|
else
|
|
data->dready_trigger_on = state;
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_trigger_ops bmc150_accel_trigger_ops = {
|
|
.set_trigger_state = bmc150_accel_data_rdy_trigger_set_state,
|
|
.try_reenable = bmc150_accel_trig_try_reen,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static irqreturn_t bmc150_accel_event_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
int dir;
|
|
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_STATUS_2);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "Error reading reg_int_status_2\n");
|
|
goto ack_intr_status;
|
|
}
|
|
|
|
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_SIGN)
|
|
dir = IIO_EV_DIR_FALLING;
|
|
else
|
|
dir = IIO_EV_DIR_RISING;
|
|
|
|
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X)
|
|
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_X,
|
|
IIO_EV_TYPE_ROC,
|
|
dir),
|
|
data->timestamp);
|
|
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y)
|
|
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_Y,
|
|
IIO_EV_TYPE_ROC,
|
|
dir),
|
|
data->timestamp);
|
|
if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z)
|
|
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
|
0,
|
|
IIO_MOD_Z,
|
|
IIO_EV_TYPE_ROC,
|
|
dir),
|
|
data->timestamp);
|
|
ack_intr_status:
|
|
if (!data->dready_trigger_on)
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
BMC150_ACCEL_REG_INT_RST_LATCH,
|
|
BMC150_ACCEL_INT_MODE_LATCH_INT |
|
|
BMC150_ACCEL_INT_MODE_LATCH_RESET);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t bmc150_accel_data_rdy_trig_poll(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
data->timestamp = iio_get_time_ns();
|
|
|
|
if (data->dready_trigger_on)
|
|
iio_trigger_poll(data->dready_trig);
|
|
else if (data->motion_trigger_on)
|
|
iio_trigger_poll(data->motion_trig);
|
|
|
|
if (data->ev_enable_state)
|
|
return IRQ_WAKE_THREAD;
|
|
else
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data)
|
|
{
|
|
const struct acpi_device_id *id;
|
|
|
|
id = acpi_match_device(dev->driver->acpi_match_table, dev);
|
|
|
|
if (!id)
|
|
return NULL;
|
|
|
|
*data = (int) id->driver_data;
|
|
|
|
return dev_name(dev);
|
|
}
|
|
|
|
static int bmc150_accel_gpio_probe(struct i2c_client *client,
|
|
struct bmc150_accel_data *data)
|
|
{
|
|
struct device *dev;
|
|
struct gpio_desc *gpio;
|
|
int ret;
|
|
|
|
if (!client)
|
|
return -EINVAL;
|
|
|
|
dev = &client->dev;
|
|
|
|
/* data ready gpio interrupt pin */
|
|
gpio = devm_gpiod_get_index(dev, BMC150_ACCEL_GPIO_NAME, 0);
|
|
if (IS_ERR(gpio)) {
|
|
dev_err(dev, "Failed: gpio get index\n");
|
|
return PTR_ERR(gpio);
|
|
}
|
|
|
|
ret = gpiod_direction_input(gpio);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpiod_to_irq(gpio);
|
|
|
|
dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bmc150_accel_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct bmc150_accel_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
const char *name = NULL;
|
|
int chip_id = 0;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
if (id) {
|
|
name = id->name;
|
|
chip_id = id->driver_data;
|
|
}
|
|
|
|
if (ACPI_HANDLE(&client->dev))
|
|
name = bmc150_accel_match_acpi_device(&client->dev, &chip_id);
|
|
|
|
data->chip_info = &bmc150_accel_chip_info_tbl[chip_id];
|
|
|
|
ret = bmc150_accel_chip_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&data->mutex);
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->channels = data->chip_info->channels;
|
|
indio_dev->num_channels = data->chip_info->num_channels;
|
|
indio_dev->name = name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &bmc150_accel_info;
|
|
|
|
if (client->irq < 0)
|
|
client->irq = bmc150_accel_gpio_probe(client, data);
|
|
|
|
if (client->irq >= 0) {
|
|
ret = devm_request_threaded_irq(
|
|
&client->dev, client->irq,
|
|
bmc150_accel_data_rdy_trig_poll,
|
|
bmc150_accel_event_handler,
|
|
IRQF_TRIGGER_RISING,
|
|
BMC150_ACCEL_IRQ_NAME,
|
|
indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
|
|
"%s-dev%d",
|
|
indio_dev->name,
|
|
indio_dev->id);
|
|
if (!data->dready_trig)
|
|
return -ENOMEM;
|
|
|
|
data->motion_trig = devm_iio_trigger_alloc(&client->dev,
|
|
"%s-any-motion-dev%d",
|
|
indio_dev->name,
|
|
indio_dev->id);
|
|
if (!data->motion_trig)
|
|
return -ENOMEM;
|
|
|
|
data->dready_trig->dev.parent = &client->dev;
|
|
data->dready_trig->ops = &bmc150_accel_trigger_ops;
|
|
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
|
|
ret = iio_trigger_register(data->dready_trig);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data->motion_trig->dev.parent = &client->dev;
|
|
data->motion_trig->ops = &bmc150_accel_trigger_ops;
|
|
iio_trigger_set_drvdata(data->motion_trig, indio_dev);
|
|
ret = iio_trigger_register(data->motion_trig);
|
|
if (ret) {
|
|
data->motion_trig = NULL;
|
|
goto err_trigger_unregister;
|
|
}
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev,
|
|
&iio_pollfunc_store_time,
|
|
bmc150_accel_trigger_handler,
|
|
NULL);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"Failed: iio triggered buffer setup\n");
|
|
goto err_trigger_unregister;
|
|
}
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Unable to register iio device\n");
|
|
goto err_buffer_cleanup;
|
|
}
|
|
|
|
ret = pm_runtime_set_active(&client->dev);
|
|
if (ret)
|
|
goto err_iio_unregister;
|
|
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_set_autosuspend_delay(&client->dev,
|
|
BMC150_AUTO_SUSPEND_DELAY_MS);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
|
|
return 0;
|
|
|
|
err_iio_unregister:
|
|
iio_device_unregister(indio_dev);
|
|
err_buffer_cleanup:
|
|
if (data->dready_trig)
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
err_trigger_unregister:
|
|
if (data->dready_trig)
|
|
iio_trigger_unregister(data->dready_trig);
|
|
if (data->motion_trig)
|
|
iio_trigger_unregister(data->motion_trig);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bmc150_accel_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
if (data->dready_trig) {
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
iio_trigger_unregister(data->dready_trig);
|
|
iio_trigger_unregister(data->motion_trig);
|
|
}
|
|
|
|
mutex_lock(&data->mutex);
|
|
bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_DEEP_SUSPEND, 0);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int bmc150_accel_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
mutex_lock(&data->mutex);
|
|
bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
|
|
mutex_lock(&data->mutex);
|
|
if (data->dready_trigger_on || data->motion_trigger_on ||
|
|
data->ev_enable_state)
|
|
bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bmc150_accel_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
dev_dbg(&data->client->dev, __func__);
|
|
ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
|
|
if (ret < 0)
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
int sleep_val;
|
|
|
|
dev_dbg(&data->client->dev, __func__);
|
|
|
|
ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
sleep_val = bmc150_accel_get_startup_times(data);
|
|
if (sleep_val < 20)
|
|
usleep_range(sleep_val * 1000, 20000);
|
|
else
|
|
msleep_interruptible(sleep_val);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops bmc150_accel_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume)
|
|
SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend,
|
|
bmc150_accel_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct acpi_device_id bmc150_accel_acpi_match[] = {
|
|
{"BSBA0150", bmc150},
|
|
{"BMC150A", bmc150},
|
|
{"BMI055A", bmi055},
|
|
{"BMA0255", bma255},
|
|
{"BMA250E", bma250e},
|
|
{"BMA222E", bma222e},
|
|
{"BMA0280", bma280},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
|
|
|
|
static const struct i2c_device_id bmc150_accel_id[] = {
|
|
{"bmc150_accel", bmc150},
|
|
{"bmi055_accel", bmi055},
|
|
{"bma255", bma255},
|
|
{"bma250e", bma250e},
|
|
{"bma222e", bma222e},
|
|
{"bma280", bma280},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
|
|
|
|
static struct i2c_driver bmc150_accel_driver = {
|
|
.driver = {
|
|
.name = BMC150_ACCEL_DRV_NAME,
|
|
.acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
|
|
.pm = &bmc150_accel_pm_ops,
|
|
},
|
|
.probe = bmc150_accel_probe,
|
|
.remove = bmc150_accel_remove,
|
|
.id_table = bmc150_accel_id,
|
|
};
|
|
module_i2c_driver(bmc150_accel_driver);
|
|
|
|
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("BMC150 accelerometer driver");
|