![Gary Hade](/assets/img/avatar_default.png)
Contention for scarce PCI memory resources has been growing due to an increasing number of PCI slots in large multi-node systems. The kernel currently attempts by default to allocate memory for all PCI expansion ROMs so there has also been an increasing number of PCI memory allocation failures seen on these systems. This occurs because the BIOS either (1) provides insufficient PCI memory resource for all the expansion ROMs or (2) provides adequate PCI memory resource for expansion ROMs but provides the space in kernel unexpected BIOS assigned P2P non-prefetch windows. The resulting PCI memory allocation failures may be benign when related to memory requests for expansion ROMs themselves but in some cases they can occur when attempting to allocate space for more critical BARs. This can happen when a successful expansion ROM allocation request consumes memory resource that was intended for a non-ROM BAR. We have seen this happen during PCI hotplug of an adapter that contains a P2P bridge where successful memory allocation for an expansion ROM BAR on device behind the bridge consumed memory that was intended for a non-ROM BAR on the P2P bridge. In all cases the allocation failure messages can be very confusing for users. This patch provides a new 'pci=norom' kernel boot parameter that can be used to disable the default PCI expansion ROM memory resource allocation. This provides a way to avoid the above described issues on systems that do not contain PCI devices for which drivers or user-level applications depend on the default PCI expansion ROM memory resource allocation behavior. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
574 lines
13 KiB
C
574 lines
13 KiB
C
/*
|
|
* Low-Level PCI Support for PC
|
|
*
|
|
* (c) 1999--2000 Martin Mares <mj@ucw.cz>
|
|
*/
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#include <asm/acpi.h>
|
|
#include <asm/segment.h>
|
|
#include <asm/io.h>
|
|
#include <asm/smp.h>
|
|
|
|
#include "pci.h"
|
|
|
|
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
|
|
PCI_PROBE_MMCONF;
|
|
|
|
static int pci_bf_sort;
|
|
int pci_routeirq;
|
|
int pcibios_last_bus = -1;
|
|
unsigned long pirq_table_addr;
|
|
struct pci_bus *pci_root_bus;
|
|
struct pci_raw_ops *raw_pci_ops;
|
|
struct pci_raw_ops *raw_pci_ext_ops;
|
|
|
|
int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
|
|
int reg, int len, u32 *val)
|
|
{
|
|
if (reg < 256 && raw_pci_ops)
|
|
return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
|
|
if (raw_pci_ext_ops)
|
|
return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
|
|
int reg, int len, u32 val)
|
|
{
|
|
if (reg < 256 && raw_pci_ops)
|
|
return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
|
|
if (raw_pci_ext_ops)
|
|
return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
|
|
{
|
|
return raw_pci_read(pci_domain_nr(bus), bus->number,
|
|
devfn, where, size, value);
|
|
}
|
|
|
|
static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
|
|
{
|
|
return raw_pci_write(pci_domain_nr(bus), bus->number,
|
|
devfn, where, size, value);
|
|
}
|
|
|
|
struct pci_ops pci_root_ops = {
|
|
.read = pci_read,
|
|
.write = pci_write,
|
|
};
|
|
|
|
/*
|
|
* legacy, numa, and acpi all want to call pcibios_scan_root
|
|
* from their initcalls. This flag prevents that.
|
|
*/
|
|
int pcibios_scanned;
|
|
|
|
/*
|
|
* This interrupt-safe spinlock protects all accesses to PCI
|
|
* configuration space.
|
|
*/
|
|
DEFINE_SPINLOCK(pci_config_lock);
|
|
|
|
static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
|
|
{
|
|
pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
|
|
printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
|
|
return 0;
|
|
}
|
|
|
|
static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = {
|
|
/*
|
|
* Systems where PCI IO resource ISA alignment can be skipped
|
|
* when the ISA enable bit in the bridge control is not set
|
|
*/
|
|
{
|
|
.callback = can_skip_ioresource_align,
|
|
.ident = "IBM System x3800",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
|
|
},
|
|
},
|
|
{
|
|
.callback = can_skip_ioresource_align,
|
|
.ident = "IBM System x3850",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
|
|
},
|
|
},
|
|
{
|
|
.callback = can_skip_ioresource_align,
|
|
.ident = "IBM System x3950",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
void __init dmi_check_skip_isa_align(void)
|
|
{
|
|
dmi_check_system(can_skip_pciprobe_dmi_table);
|
|
}
|
|
|
|
static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
|
|
{
|
|
struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
|
|
|
|
if (pci_probe & PCI_NOASSIGN_ROMS) {
|
|
if (rom_r->parent)
|
|
return;
|
|
if (rom_r->start) {
|
|
/* we deal with BIOS assigned ROM later */
|
|
return;
|
|
}
|
|
rom_r->start = rom_r->end = rom_r->flags = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Called after each bus is probed, but before its children
|
|
* are examined.
|
|
*/
|
|
|
|
void __devinit pcibios_fixup_bus(struct pci_bus *b)
|
|
{
|
|
struct pci_dev *dev;
|
|
|
|
pci_read_bridge_bases(b);
|
|
list_for_each_entry(dev, &b->devices, bus_list)
|
|
pcibios_fixup_device_resources(dev);
|
|
}
|
|
|
|
/*
|
|
* Only use DMI information to set this if nothing was passed
|
|
* on the kernel command line (which was parsed earlier).
|
|
*/
|
|
|
|
static int __devinit set_bf_sort(const struct dmi_system_id *d)
|
|
{
|
|
if (pci_bf_sort == pci_bf_sort_default) {
|
|
pci_bf_sort = pci_dmi_bf;
|
|
printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
|
|
*/
|
|
#ifdef __i386__
|
|
static int __devinit assign_all_busses(const struct dmi_system_id *d)
|
|
{
|
|
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
|
|
printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
|
|
" (pci=assign-busses)\n", d->ident);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
|
|
#ifdef __i386__
|
|
/*
|
|
* Laptops which need pci=assign-busses to see Cardbus cards
|
|
*/
|
|
{
|
|
.callback = assign_all_busses,
|
|
.ident = "Samsung X20 Laptop",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
|
|
},
|
|
},
|
|
#endif /* __i386__ */
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "Dell PowerEdge 1950",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "Dell PowerEdge 1955",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "Dell PowerEdge 2900",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "Dell PowerEdge 2950",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "Dell PowerEdge R900",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL20p G3",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL20p G4",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL30p G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL25p G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL35p G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL45p G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL45p G2",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL460c G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL465c G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL480c G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant BL685c G1",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant DL360",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant DL380",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
|
|
},
|
|
},
|
|
#ifdef __i386__
|
|
{
|
|
.callback = assign_all_busses,
|
|
.ident = "Compaq EVO N800c",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
|
|
},
|
|
},
|
|
#endif
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant DL385 G2",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
|
|
},
|
|
},
|
|
{
|
|
.callback = set_bf_sort,
|
|
.ident = "HP ProLiant DL585 G2",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
void __init dmi_check_pciprobe(void)
|
|
{
|
|
dmi_check_system(pciprobe_dmi_table);
|
|
}
|
|
|
|
struct pci_bus * __devinit pcibios_scan_root(int busnum)
|
|
{
|
|
struct pci_bus *bus = NULL;
|
|
struct pci_sysdata *sd;
|
|
|
|
while ((bus = pci_find_next_bus(bus)) != NULL) {
|
|
if (bus->number == busnum) {
|
|
/* Already scanned */
|
|
return bus;
|
|
}
|
|
}
|
|
|
|
/* Allocate per-root-bus (not per bus) arch-specific data.
|
|
* TODO: leak; this memory is never freed.
|
|
* It's arguable whether it's worth the trouble to care.
|
|
*/
|
|
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
|
|
if (!sd) {
|
|
printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum);
|
|
return NULL;
|
|
}
|
|
|
|
sd->node = get_mp_bus_to_node(busnum);
|
|
|
|
printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
|
|
bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
|
|
if (!bus)
|
|
kfree(sd);
|
|
|
|
return bus;
|
|
}
|
|
|
|
extern u8 pci_cache_line_size;
|
|
|
|
static int __init pcibios_init(void)
|
|
{
|
|
struct cpuinfo_x86 *c = &boot_cpu_data;
|
|
|
|
if (!raw_pci_ops) {
|
|
printk(KERN_WARNING "PCI: System does not support PCI\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Assume PCI cacheline size of 32 bytes for all x86s except K7/K8
|
|
* and P4. It's also good for 386/486s (which actually have 16)
|
|
* as quite a few PCI devices do not support smaller values.
|
|
*/
|
|
pci_cache_line_size = 32 >> 2;
|
|
if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
|
|
pci_cache_line_size = 64 >> 2; /* K7 & K8 */
|
|
else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
|
|
pci_cache_line_size = 128 >> 2; /* P4 */
|
|
|
|
pcibios_resource_survey();
|
|
|
|
if (pci_bf_sort >= pci_force_bf)
|
|
pci_sort_breadthfirst();
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(pcibios_init);
|
|
|
|
char * __devinit pcibios_setup(char *str)
|
|
{
|
|
if (!strcmp(str, "off")) {
|
|
pci_probe = 0;
|
|
return NULL;
|
|
} else if (!strcmp(str, "bfsort")) {
|
|
pci_bf_sort = pci_force_bf;
|
|
return NULL;
|
|
} else if (!strcmp(str, "nobfsort")) {
|
|
pci_bf_sort = pci_force_nobf;
|
|
return NULL;
|
|
}
|
|
#ifdef CONFIG_PCI_BIOS
|
|
else if (!strcmp(str, "bios")) {
|
|
pci_probe = PCI_PROBE_BIOS;
|
|
return NULL;
|
|
} else if (!strcmp(str, "nobios")) {
|
|
pci_probe &= ~PCI_PROBE_BIOS;
|
|
return NULL;
|
|
} else if (!strcmp(str, "biosirq")) {
|
|
pci_probe |= PCI_BIOS_IRQ_SCAN;
|
|
return NULL;
|
|
} else if (!strncmp(str, "pirqaddr=", 9)) {
|
|
pirq_table_addr = simple_strtoul(str+9, NULL, 0);
|
|
return NULL;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_PCI_DIRECT
|
|
else if (!strcmp(str, "conf1")) {
|
|
pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
|
|
return NULL;
|
|
}
|
|
else if (!strcmp(str, "conf2")) {
|
|
pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
|
|
return NULL;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_PCI_MMCONFIG
|
|
else if (!strcmp(str, "nommconf")) {
|
|
pci_probe &= ~PCI_PROBE_MMCONF;
|
|
return NULL;
|
|
}
|
|
else if (!strcmp(str, "check_enable_amd_mmconf")) {
|
|
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
|
|
return NULL;
|
|
}
|
|
#endif
|
|
else if (!strcmp(str, "noacpi")) {
|
|
acpi_noirq_set();
|
|
return NULL;
|
|
}
|
|
else if (!strcmp(str, "noearly")) {
|
|
pci_probe |= PCI_PROBE_NOEARLY;
|
|
return NULL;
|
|
}
|
|
#ifndef CONFIG_X86_VISWS
|
|
else if (!strcmp(str, "usepirqmask")) {
|
|
pci_probe |= PCI_USE_PIRQ_MASK;
|
|
return NULL;
|
|
} else if (!strncmp(str, "irqmask=", 8)) {
|
|
pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
|
|
return NULL;
|
|
} else if (!strncmp(str, "lastbus=", 8)) {
|
|
pcibios_last_bus = simple_strtol(str+8, NULL, 0);
|
|
return NULL;
|
|
}
|
|
#endif
|
|
else if (!strcmp(str, "rom")) {
|
|
pci_probe |= PCI_ASSIGN_ROMS;
|
|
return NULL;
|
|
} else if (!strcmp(str, "norom")) {
|
|
pci_probe |= PCI_NOASSIGN_ROMS;
|
|
return NULL;
|
|
} else if (!strcmp(str, "assign-busses")) {
|
|
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
|
|
return NULL;
|
|
} else if (!strcmp(str, "use_crs")) {
|
|
pci_probe |= PCI_USE__CRS;
|
|
return NULL;
|
|
} else if (!strcmp(str, "routeirq")) {
|
|
pci_routeirq = 1;
|
|
return NULL;
|
|
} else if (!strcmp(str, "skip_isa_align")) {
|
|
pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
|
|
return NULL;
|
|
}
|
|
return str;
|
|
}
|
|
|
|
unsigned int pcibios_assign_all_busses(void)
|
|
{
|
|
return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
|
|
}
|
|
|
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
|
{
|
|
int err;
|
|
|
|
if ((err = pci_enable_resources(dev, mask)) < 0)
|
|
return err;
|
|
|
|
if (!dev->msi_enabled)
|
|
return pcibios_enable_irq(dev);
|
|
return 0;
|
|
}
|
|
|
|
void pcibios_disable_device (struct pci_dev *dev)
|
|
{
|
|
if (!dev->msi_enabled && pcibios_disable_irq)
|
|
pcibios_disable_irq(dev);
|
|
}
|
|
|
|
struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
|
|
{
|
|
struct pci_bus *bus = NULL;
|
|
struct pci_sysdata *sd;
|
|
|
|
/*
|
|
* Allocate per-root-bus (not per bus) arch-specific data.
|
|
* TODO: leak; this memory is never freed.
|
|
* It's arguable whether it's worth the trouble to care.
|
|
*/
|
|
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
|
|
if (!sd) {
|
|
printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
|
|
return NULL;
|
|
}
|
|
sd->node = node;
|
|
bus = pci_scan_bus(busno, ops, sd);
|
|
if (!bus)
|
|
kfree(sd);
|
|
|
|
return bus;
|
|
}
|
|
|
|
struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
|
|
{
|
|
return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
|
|
}
|