![Wolfram Sang](/assets/img/avatar_default.png)
RuntimePM of the adapter device is now taken care of by the core. So, we can remove these calls. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1362 lines
33 KiB
C
1362 lines
33 KiB
C
/* linux/drivers/i2c/busses/i2c-s3c2410.c
|
|
*
|
|
* Copyright (C) 2004,2005,2009 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C2410 I2C Controller
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/time.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <linux/platform_data/i2c-s3c2410.h>
|
|
|
|
/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
|
|
|
|
#define S3C2410_IICCON 0x00
|
|
#define S3C2410_IICSTAT 0x04
|
|
#define S3C2410_IICADD 0x08
|
|
#define S3C2410_IICDS 0x0C
|
|
#define S3C2440_IICLC 0x10
|
|
|
|
#define S3C2410_IICCON_ACKEN (1 << 7)
|
|
#define S3C2410_IICCON_TXDIV_16 (0 << 6)
|
|
#define S3C2410_IICCON_TXDIV_512 (1 << 6)
|
|
#define S3C2410_IICCON_IRQEN (1 << 5)
|
|
#define S3C2410_IICCON_IRQPEND (1 << 4)
|
|
#define S3C2410_IICCON_SCALE(x) ((x) & 0xf)
|
|
#define S3C2410_IICCON_SCALEMASK (0xf)
|
|
|
|
#define S3C2410_IICSTAT_MASTER_RX (2 << 6)
|
|
#define S3C2410_IICSTAT_MASTER_TX (3 << 6)
|
|
#define S3C2410_IICSTAT_SLAVE_RX (0 << 6)
|
|
#define S3C2410_IICSTAT_SLAVE_TX (1 << 6)
|
|
#define S3C2410_IICSTAT_MODEMASK (3 << 6)
|
|
|
|
#define S3C2410_IICSTAT_START (1 << 5)
|
|
#define S3C2410_IICSTAT_BUSBUSY (1 << 5)
|
|
#define S3C2410_IICSTAT_TXRXEN (1 << 4)
|
|
#define S3C2410_IICSTAT_ARBITR (1 << 3)
|
|
#define S3C2410_IICSTAT_ASSLAVE (1 << 2)
|
|
#define S3C2410_IICSTAT_ADDR0 (1 << 1)
|
|
#define S3C2410_IICSTAT_LASTBIT (1 << 0)
|
|
|
|
#define S3C2410_IICLC_SDA_DELAY0 (0 << 0)
|
|
#define S3C2410_IICLC_SDA_DELAY5 (1 << 0)
|
|
#define S3C2410_IICLC_SDA_DELAY10 (2 << 0)
|
|
#define S3C2410_IICLC_SDA_DELAY15 (3 << 0)
|
|
#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0)
|
|
|
|
#define S3C2410_IICLC_FILTER_ON (1 << 2)
|
|
|
|
/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
|
|
#define QUIRK_S3C2440 (1 << 0)
|
|
#define QUIRK_HDMIPHY (1 << 1)
|
|
#define QUIRK_NO_GPIO (1 << 2)
|
|
#define QUIRK_POLL (1 << 3)
|
|
|
|
/* Max time to wait for bus to become idle after a xfer (in us) */
|
|
#define S3C2410_IDLE_TIMEOUT 5000
|
|
|
|
/* Exynos5 Sysreg offset */
|
|
#define EXYNOS5_SYS_I2C_CFG 0x0234
|
|
|
|
/* i2c controller state */
|
|
enum s3c24xx_i2c_state {
|
|
STATE_IDLE,
|
|
STATE_START,
|
|
STATE_READ,
|
|
STATE_WRITE,
|
|
STATE_STOP
|
|
};
|
|
|
|
struct s3c24xx_i2c {
|
|
wait_queue_head_t wait;
|
|
kernel_ulong_t quirks;
|
|
unsigned int suspended:1;
|
|
|
|
struct i2c_msg *msg;
|
|
unsigned int msg_num;
|
|
unsigned int msg_idx;
|
|
unsigned int msg_ptr;
|
|
|
|
unsigned int tx_setup;
|
|
unsigned int irq;
|
|
|
|
enum s3c24xx_i2c_state state;
|
|
unsigned long clkrate;
|
|
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
struct i2c_adapter adap;
|
|
|
|
struct s3c2410_platform_i2c *pdata;
|
|
int gpios[2];
|
|
struct pinctrl *pctrl;
|
|
#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
|
|
struct notifier_block freq_transition;
|
|
#endif
|
|
struct regmap *sysreg;
|
|
unsigned int sys_i2c_cfg;
|
|
};
|
|
|
|
static const struct platform_device_id s3c24xx_driver_ids[] = {
|
|
{
|
|
.name = "s3c2410-i2c",
|
|
.driver_data = 0,
|
|
}, {
|
|
.name = "s3c2440-i2c",
|
|
.driver_data = QUIRK_S3C2440,
|
|
}, {
|
|
.name = "s3c2440-hdmiphy-i2c",
|
|
.driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
|
|
}, { },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
|
|
|
|
static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id s3c24xx_i2c_match[] = {
|
|
{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
|
|
{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
|
|
{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
|
|
.data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
|
|
{ .compatible = "samsung,exynos5440-i2c",
|
|
.data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
|
|
{ .compatible = "samsung,exynos5-sata-phy-i2c",
|
|
.data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
|
|
#endif
|
|
|
|
/* s3c24xx_get_device_quirks
|
|
*
|
|
* Get controller type either from device tree or platform device variant.
|
|
*/
|
|
|
|
static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
|
|
{
|
|
if (pdev->dev.of_node) {
|
|
const struct of_device_id *match;
|
|
match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
|
|
return (kernel_ulong_t)match->data;
|
|
}
|
|
|
|
return platform_get_device_id(pdev)->driver_data;
|
|
}
|
|
|
|
/* s3c24xx_i2c_master_complete
|
|
*
|
|
* complete the message and wake up the caller, using the given return code,
|
|
* or zero to mean ok.
|
|
*/
|
|
|
|
static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
|
|
{
|
|
dev_dbg(i2c->dev, "master_complete %d\n", ret);
|
|
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg = NULL;
|
|
i2c->msg_idx++;
|
|
i2c->msg_num = 0;
|
|
if (ret)
|
|
i2c->msg_idx = ret;
|
|
|
|
if (!(i2c->quirks & QUIRK_POLL))
|
|
wake_up(&i2c->wait);
|
|
}
|
|
|
|
static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
|
|
}
|
|
|
|
static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
|
|
}
|
|
|
|
/* irq enable/disable functions */
|
|
|
|
static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
|
|
}
|
|
|
|
static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
|
|
}
|
|
|
|
static bool is_ack(struct s3c24xx_i2c *i2c)
|
|
{
|
|
int tries;
|
|
|
|
for (tries = 50; tries; --tries) {
|
|
if (readl(i2c->regs + S3C2410_IICCON)
|
|
& S3C2410_IICCON_IRQPEND) {
|
|
if (!(readl(i2c->regs + S3C2410_IICSTAT)
|
|
& S3C2410_IICSTAT_LASTBIT))
|
|
return true;
|
|
}
|
|
usleep_range(1000, 2000);
|
|
}
|
|
dev_err(i2c->dev, "ack was not received\n");
|
|
return false;
|
|
}
|
|
|
|
/* s3c24xx_i2c_message_start
|
|
*
|
|
* put the start of a message onto the bus
|
|
*/
|
|
|
|
static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
|
|
struct i2c_msg *msg)
|
|
{
|
|
unsigned int addr = (msg->addr & 0x7f) << 1;
|
|
unsigned long stat;
|
|
unsigned long iiccon;
|
|
|
|
stat = 0;
|
|
stat |= S3C2410_IICSTAT_TXRXEN;
|
|
|
|
if (msg->flags & I2C_M_RD) {
|
|
stat |= S3C2410_IICSTAT_MASTER_RX;
|
|
addr |= 1;
|
|
} else
|
|
stat |= S3C2410_IICSTAT_MASTER_TX;
|
|
|
|
if (msg->flags & I2C_M_REV_DIR_ADDR)
|
|
addr ^= 1;
|
|
|
|
/* todo - check for whether ack wanted or not */
|
|
s3c24xx_i2c_enable_ack(i2c);
|
|
|
|
iiccon = readl(i2c->regs + S3C2410_IICCON);
|
|
writel(stat, i2c->regs + S3C2410_IICSTAT);
|
|
|
|
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
|
|
writeb(addr, i2c->regs + S3C2410_IICDS);
|
|
|
|
/* delay here to ensure the data byte has gotten onto the bus
|
|
* before the transaction is started */
|
|
|
|
ndelay(i2c->tx_setup);
|
|
|
|
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
|
|
writel(iiccon, i2c->regs + S3C2410_IICCON);
|
|
|
|
stat |= S3C2410_IICSTAT_START;
|
|
writel(stat, i2c->regs + S3C2410_IICSTAT);
|
|
|
|
if (i2c->quirks & QUIRK_POLL) {
|
|
while ((i2c->msg_num != 0) && is_ack(i2c)) {
|
|
i2c_s3c_irq_nextbyte(i2c, stat);
|
|
stat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
|
|
if (stat & S3C2410_IICSTAT_ARBITR)
|
|
dev_err(i2c->dev, "deal with arbitration loss\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
|
|
{
|
|
unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
|
|
dev_dbg(i2c->dev, "STOP\n");
|
|
|
|
/*
|
|
* The datasheet says that the STOP sequence should be:
|
|
* 1) I2CSTAT.5 = 0 - Clear BUSY (or 'generate STOP')
|
|
* 2) I2CCON.4 = 0 - Clear IRQPEND
|
|
* 3) Wait until the stop condition takes effect.
|
|
* 4*) I2CSTAT.4 = 0 - Clear TXRXEN
|
|
*
|
|
* Where, step "4*" is only for buses with the "HDMIPHY" quirk.
|
|
*
|
|
* However, after much experimentation, it appears that:
|
|
* a) normal buses automatically clear BUSY and transition from
|
|
* Master->Slave when they complete generating a STOP condition.
|
|
* Therefore, step (3) can be done in doxfer() by polling I2CCON.4
|
|
* after starting the STOP generation here.
|
|
* b) HDMIPHY bus does neither, so there is no way to do step 3.
|
|
* There is no indication when this bus has finished generating
|
|
* STOP.
|
|
*
|
|
* In fact, we have found that as soon as the IRQPEND bit is cleared in
|
|
* step 2, the HDMIPHY bus generates the STOP condition, and then
|
|
* immediately starts transferring another data byte, even though the
|
|
* bus is supposedly stopped. This is presumably because the bus is
|
|
* still in "Master" mode, and its BUSY bit is still set.
|
|
*
|
|
* To avoid these extra post-STOP transactions on HDMI phy devices, we
|
|
* just disable Serial Output on the bus (I2CSTAT.4 = 0) directly,
|
|
* instead of first generating a proper STOP condition. This should
|
|
* float SDA & SCK terminating the transfer. Subsequent transfers
|
|
* start with a proper START condition, and proceed normally.
|
|
*
|
|
* The HDMIPHY bus is an internal bus that always has exactly two
|
|
* devices, the host as Master and the HDMIPHY device as the slave.
|
|
* Skipping the STOP condition has been tested on this bus and works.
|
|
*/
|
|
if (i2c->quirks & QUIRK_HDMIPHY) {
|
|
/* Stop driving the I2C pins */
|
|
iicstat &= ~S3C2410_IICSTAT_TXRXEN;
|
|
} else {
|
|
/* stop the transfer */
|
|
iicstat &= ~S3C2410_IICSTAT_START;
|
|
}
|
|
writel(iicstat, i2c->regs + S3C2410_IICSTAT);
|
|
|
|
i2c->state = STATE_STOP;
|
|
|
|
s3c24xx_i2c_master_complete(i2c, ret);
|
|
s3c24xx_i2c_disable_irq(i2c);
|
|
}
|
|
|
|
/* helper functions to determine the current state in the set of
|
|
* messages we are sending */
|
|
|
|
/* is_lastmsg()
|
|
*
|
|
* returns TRUE if the current message is the last in the set
|
|
*/
|
|
|
|
static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
|
|
{
|
|
return i2c->msg_idx >= (i2c->msg_num - 1);
|
|
}
|
|
|
|
/* is_msglast
|
|
*
|
|
* returns TRUE if we this is the last byte in the current message
|
|
*/
|
|
|
|
static inline int is_msglast(struct s3c24xx_i2c *i2c)
|
|
{
|
|
/* msg->len is always 1 for the first byte of smbus block read.
|
|
* Actual length will be read from slave. More bytes will be
|
|
* read according to the length then. */
|
|
if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
|
|
return 0;
|
|
|
|
return i2c->msg_ptr == i2c->msg->len-1;
|
|
}
|
|
|
|
/* is_msgend
|
|
*
|
|
* returns TRUE if we reached the end of the current message
|
|
*/
|
|
|
|
static inline int is_msgend(struct s3c24xx_i2c *i2c)
|
|
{
|
|
return i2c->msg_ptr >= i2c->msg->len;
|
|
}
|
|
|
|
/* i2c_s3c_irq_nextbyte
|
|
*
|
|
* process an interrupt and work out what to do
|
|
*/
|
|
|
|
static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
{
|
|
unsigned long tmp;
|
|
unsigned char byte;
|
|
int ret = 0;
|
|
|
|
switch (i2c->state) {
|
|
|
|
case STATE_IDLE:
|
|
dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
|
|
goto out;
|
|
|
|
case STATE_STOP:
|
|
dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
|
|
s3c24xx_i2c_disable_irq(i2c);
|
|
goto out_ack;
|
|
|
|
case STATE_START:
|
|
/* last thing we did was send a start condition on the
|
|
* bus, or started a new i2c message
|
|
*/
|
|
|
|
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
|
|
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
|
|
/* ack was not received... */
|
|
|
|
dev_dbg(i2c->dev, "ack was not received\n");
|
|
s3c24xx_i2c_stop(i2c, -ENXIO);
|
|
goto out_ack;
|
|
}
|
|
|
|
if (i2c->msg->flags & I2C_M_RD)
|
|
i2c->state = STATE_READ;
|
|
else
|
|
i2c->state = STATE_WRITE;
|
|
|
|
/* terminate the transfer if there is nothing to do
|
|
* as this is used by the i2c probe to find devices. */
|
|
|
|
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
|
|
s3c24xx_i2c_stop(i2c, 0);
|
|
goto out_ack;
|
|
}
|
|
|
|
if (i2c->state == STATE_READ)
|
|
goto prepare_read;
|
|
|
|
/* fall through to the write state, as we will need to
|
|
* send a byte as well */
|
|
|
|
case STATE_WRITE:
|
|
/* we are writing data to the device... check for the
|
|
* end of the message, and if so, work out what to do
|
|
*/
|
|
|
|
if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
|
|
if (iicstat & S3C2410_IICSTAT_LASTBIT) {
|
|
dev_dbg(i2c->dev, "WRITE: No Ack\n");
|
|
|
|
s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
|
|
goto out_ack;
|
|
}
|
|
}
|
|
|
|
retry_write:
|
|
|
|
if (!is_msgend(i2c)) {
|
|
byte = i2c->msg->buf[i2c->msg_ptr++];
|
|
writeb(byte, i2c->regs + S3C2410_IICDS);
|
|
|
|
/* delay after writing the byte to allow the
|
|
* data setup time on the bus, as writing the
|
|
* data to the register causes the first bit
|
|
* to appear on SDA, and SCL will change as
|
|
* soon as the interrupt is acknowledged */
|
|
|
|
ndelay(i2c->tx_setup);
|
|
|
|
} else if (!is_lastmsg(i2c)) {
|
|
/* we need to go to the next i2c message */
|
|
|
|
dev_dbg(i2c->dev, "WRITE: Next Message\n");
|
|
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx++;
|
|
i2c->msg++;
|
|
|
|
/* check to see if we need to do another message */
|
|
if (i2c->msg->flags & I2C_M_NOSTART) {
|
|
|
|
if (i2c->msg->flags & I2C_M_RD) {
|
|
/* cannot do this, the controller
|
|
* forces us to send a new START
|
|
* when we change direction */
|
|
|
|
s3c24xx_i2c_stop(i2c, -EINVAL);
|
|
}
|
|
|
|
goto retry_write;
|
|
} else {
|
|
/* send the new start */
|
|
s3c24xx_i2c_message_start(i2c, i2c->msg);
|
|
i2c->state = STATE_START;
|
|
}
|
|
|
|
} else {
|
|
/* send stop */
|
|
|
|
s3c24xx_i2c_stop(i2c, 0);
|
|
}
|
|
break;
|
|
|
|
case STATE_READ:
|
|
/* we have a byte of data in the data register, do
|
|
* something with it, and then work out whether we are
|
|
* going to do any more read/write
|
|
*/
|
|
|
|
byte = readb(i2c->regs + S3C2410_IICDS);
|
|
i2c->msg->buf[i2c->msg_ptr++] = byte;
|
|
|
|
/* Add actual length to read for smbus block read */
|
|
if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
|
|
i2c->msg->len += byte;
|
|
prepare_read:
|
|
if (is_msglast(i2c)) {
|
|
/* last byte of buffer */
|
|
|
|
if (is_lastmsg(i2c))
|
|
s3c24xx_i2c_disable_ack(i2c);
|
|
|
|
} else if (is_msgend(i2c)) {
|
|
/* ok, we've read the entire buffer, see if there
|
|
* is anything else we need to do */
|
|
|
|
if (is_lastmsg(i2c)) {
|
|
/* last message, send stop and complete */
|
|
dev_dbg(i2c->dev, "READ: Send Stop\n");
|
|
|
|
s3c24xx_i2c_stop(i2c, 0);
|
|
} else {
|
|
/* go to the next transfer */
|
|
dev_dbg(i2c->dev, "READ: Next Transfer\n");
|
|
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx++;
|
|
i2c->msg++;
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
/* acknowlegde the IRQ and get back on with the work */
|
|
|
|
out_ack:
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
tmp &= ~S3C2410_IICCON_IRQPEND;
|
|
writel(tmp, i2c->regs + S3C2410_IICCON);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/* s3c24xx_i2c_irq
|
|
*
|
|
* top level IRQ servicing routine
|
|
*/
|
|
|
|
static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
|
|
{
|
|
struct s3c24xx_i2c *i2c = dev_id;
|
|
unsigned long status;
|
|
unsigned long tmp;
|
|
|
|
status = readl(i2c->regs + S3C2410_IICSTAT);
|
|
|
|
if (status & S3C2410_IICSTAT_ARBITR) {
|
|
/* deal with arbitration loss */
|
|
dev_err(i2c->dev, "deal with arbitration loss\n");
|
|
}
|
|
|
|
if (i2c->state == STATE_IDLE) {
|
|
dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
|
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
tmp &= ~S3C2410_IICCON_IRQPEND;
|
|
writel(tmp, i2c->regs + S3C2410_IICCON);
|
|
goto out;
|
|
}
|
|
|
|
/* pretty much this leaves us with the fact that we've
|
|
* transmitted or received whatever byte we last sent */
|
|
|
|
i2c_s3c_irq_nextbyte(i2c, status);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Disable the bus so that we won't get any interrupts from now on, or try
|
|
* to drive any lines. This is the default state when we don't have
|
|
* anything to send/receive.
|
|
*
|
|
* If there is an event on the bus, or we have a pre-existing event at
|
|
* kernel boot time, we may not notice the event and the I2C controller
|
|
* will lock the bus with the I2C clock line low indefinitely.
|
|
*/
|
|
static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Stop driving the I2C pins */
|
|
tmp = readl(i2c->regs + S3C2410_IICSTAT);
|
|
tmp &= ~S3C2410_IICSTAT_TXRXEN;
|
|
writel(tmp, i2c->regs + S3C2410_IICSTAT);
|
|
|
|
/* We don't expect any interrupts now, and don't want send acks */
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
tmp &= ~(S3C2410_IICCON_IRQEN | S3C2410_IICCON_IRQPEND |
|
|
S3C2410_IICCON_ACKEN);
|
|
writel(tmp, i2c->regs + S3C2410_IICCON);
|
|
}
|
|
|
|
|
|
/* s3c24xx_i2c_set_master
|
|
*
|
|
* get the i2c bus for a master transaction
|
|
*/
|
|
|
|
static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long iicstat;
|
|
int timeout = 400;
|
|
|
|
while (timeout-- > 0) {
|
|
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
|
|
if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
|
|
return 0;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* s3c24xx_i2c_wait_idle
|
|
*
|
|
* wait for the i2c bus to become idle.
|
|
*/
|
|
|
|
static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned long iicstat;
|
|
ktime_t start, now;
|
|
unsigned long delay;
|
|
int spins;
|
|
|
|
/* ensure the stop has been through the bus */
|
|
|
|
dev_dbg(i2c->dev, "waiting for bus idle\n");
|
|
|
|
start = now = ktime_get();
|
|
|
|
/*
|
|
* Most of the time, the bus is already idle within a few usec of the
|
|
* end of a transaction. However, really slow i2c devices can stretch
|
|
* the clock, delaying STOP generation.
|
|
*
|
|
* On slower SoCs this typically happens within a very small number of
|
|
* instructions so busy wait briefly to avoid scheduling overhead.
|
|
*/
|
|
spins = 3;
|
|
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
while ((iicstat & S3C2410_IICSTAT_START) && --spins) {
|
|
cpu_relax();
|
|
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
}
|
|
|
|
/*
|
|
* If we do get an appreciable delay as a compromise between idle
|
|
* detection latency for the normal, fast case, and system load in the
|
|
* slow device case, use an exponential back off in the polling loop,
|
|
* up to 1/10th of the total timeout, then continue to poll at a
|
|
* constant rate up to the timeout.
|
|
*/
|
|
delay = 1;
|
|
while ((iicstat & S3C2410_IICSTAT_START) &&
|
|
ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) {
|
|
usleep_range(delay, 2 * delay);
|
|
if (delay < S3C2410_IDLE_TIMEOUT / 10)
|
|
delay <<= 1;
|
|
now = ktime_get();
|
|
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
}
|
|
|
|
if (iicstat & S3C2410_IICSTAT_START)
|
|
dev_warn(i2c->dev, "timeout waiting for bus idle\n");
|
|
}
|
|
|
|
/* s3c24xx_i2c_doxfer
|
|
*
|
|
* this starts an i2c transfer
|
|
*/
|
|
|
|
static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
unsigned long timeout;
|
|
int ret;
|
|
|
|
if (i2c->suspended)
|
|
return -EIO;
|
|
|
|
ret = s3c24xx_i2c_set_master(i2c);
|
|
if (ret != 0) {
|
|
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
|
|
ret = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
i2c->msg = msgs;
|
|
i2c->msg_num = num;
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx = 0;
|
|
i2c->state = STATE_START;
|
|
|
|
s3c24xx_i2c_enable_irq(i2c);
|
|
s3c24xx_i2c_message_start(i2c, msgs);
|
|
|
|
if (i2c->quirks & QUIRK_POLL) {
|
|
ret = i2c->msg_idx;
|
|
|
|
if (ret != num)
|
|
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
|
|
|
|
goto out;
|
|
}
|
|
|
|
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
|
|
|
|
ret = i2c->msg_idx;
|
|
|
|
/* having these next two as dev_err() makes life very
|
|
* noisy when doing an i2cdetect */
|
|
|
|
if (timeout == 0)
|
|
dev_dbg(i2c->dev, "timeout\n");
|
|
else if (ret != num)
|
|
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
|
|
|
|
/* For QUIRK_HDMIPHY, bus is already disabled */
|
|
if (i2c->quirks & QUIRK_HDMIPHY)
|
|
goto out;
|
|
|
|
s3c24xx_i2c_wait_idle(i2c);
|
|
|
|
s3c24xx_i2c_disable_bus(i2c);
|
|
|
|
out:
|
|
i2c->state = STATE_IDLE;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* s3c24xx_i2c_xfer
|
|
*
|
|
* first port of call from the i2c bus code when an message needs
|
|
* transferring across the i2c bus.
|
|
*/
|
|
|
|
static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
|
|
int retry;
|
|
int ret;
|
|
|
|
ret = clk_enable(i2c->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (retry = 0; retry < adap->retries; retry++) {
|
|
|
|
ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
|
|
|
|
if (ret != -EAGAIN) {
|
|
clk_disable(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
clk_disable(i2c->clk);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
/* declare our i2c functionality */
|
|
static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART |
|
|
I2C_FUNC_PROTOCOL_MANGLING;
|
|
}
|
|
|
|
/* i2c bus registration info */
|
|
|
|
static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
|
|
.master_xfer = s3c24xx_i2c_xfer,
|
|
.functionality = s3c24xx_i2c_func,
|
|
};
|
|
|
|
/* s3c24xx_i2c_calcdivisor
|
|
*
|
|
* return the divisor settings for a given frequency
|
|
*/
|
|
|
|
static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
|
|
unsigned int *div1, unsigned int *divs)
|
|
{
|
|
unsigned int calc_divs = clkin / wanted;
|
|
unsigned int calc_div1;
|
|
|
|
if (calc_divs > (16*16))
|
|
calc_div1 = 512;
|
|
else
|
|
calc_div1 = 16;
|
|
|
|
calc_divs += calc_div1-1;
|
|
calc_divs /= calc_div1;
|
|
|
|
if (calc_divs == 0)
|
|
calc_divs = 1;
|
|
if (calc_divs > 17)
|
|
calc_divs = 17;
|
|
|
|
*divs = calc_divs;
|
|
*div1 = calc_div1;
|
|
|
|
return clkin / (calc_divs * calc_div1);
|
|
}
|
|
|
|
/* s3c24xx_i2c_clockrate
|
|
*
|
|
* work out a divisor for the user requested frequency setting,
|
|
* either by the requested frequency, or scanning the acceptable
|
|
* range of frequencies until something is found
|
|
*/
|
|
|
|
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
|
|
{
|
|
struct s3c2410_platform_i2c *pdata = i2c->pdata;
|
|
unsigned long clkin = clk_get_rate(i2c->clk);
|
|
unsigned int divs, div1;
|
|
unsigned long target_frequency;
|
|
u32 iiccon;
|
|
int freq;
|
|
|
|
i2c->clkrate = clkin;
|
|
clkin /= 1000; /* clkin now in KHz */
|
|
|
|
dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
|
|
|
|
target_frequency = pdata->frequency ? pdata->frequency : 100000;
|
|
|
|
target_frequency /= 1000; /* Target frequency now in KHz */
|
|
|
|
freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
|
|
|
|
if (freq > target_frequency) {
|
|
dev_err(i2c->dev,
|
|
"Unable to achieve desired frequency %luKHz." \
|
|
" Lowest achievable %dKHz\n", target_frequency, freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*got = freq;
|
|
|
|
iiccon = readl(i2c->regs + S3C2410_IICCON);
|
|
iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
|
|
iiccon |= (divs-1);
|
|
|
|
if (div1 == 512)
|
|
iiccon |= S3C2410_IICCON_TXDIV_512;
|
|
|
|
if (i2c->quirks & QUIRK_POLL)
|
|
iiccon |= S3C2410_IICCON_SCALE(2);
|
|
|
|
writel(iiccon, i2c->regs + S3C2410_IICCON);
|
|
|
|
if (i2c->quirks & QUIRK_S3C2440) {
|
|
unsigned long sda_delay;
|
|
|
|
if (pdata->sda_delay) {
|
|
sda_delay = clkin * pdata->sda_delay;
|
|
sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
|
|
sda_delay = DIV_ROUND_UP(sda_delay, 5);
|
|
if (sda_delay > 3)
|
|
sda_delay = 3;
|
|
sda_delay |= S3C2410_IICLC_FILTER_ON;
|
|
} else
|
|
sda_delay = 0;
|
|
|
|
dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
|
|
writel(sda_delay, i2c->regs + S3C2440_IICLC);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
|
|
|
|
#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
|
|
|
|
static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
|
|
unsigned long val, void *data)
|
|
{
|
|
struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
|
|
unsigned int got;
|
|
int delta_f;
|
|
int ret;
|
|
|
|
delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
|
|
|
|
/* if we're post-change and the input clock has slowed down
|
|
* or at pre-change and the clock is about to speed up, then
|
|
* adjust our clock rate. <0 is slow, >0 speedup.
|
|
*/
|
|
|
|
if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
|
|
(val == CPUFREQ_PRECHANGE && delta_f > 0)) {
|
|
i2c_lock_adapter(&i2c->adap);
|
|
ret = s3c24xx_i2c_clockrate(i2c, &got);
|
|
i2c_unlock_adapter(&i2c->adap);
|
|
|
|
if (ret < 0)
|
|
dev_err(i2c->dev, "cannot find frequency\n");
|
|
else
|
|
dev_info(i2c->dev, "setting freq %d\n", got);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
|
|
{
|
|
i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
|
|
|
|
return cpufreq_register_notifier(&i2c->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
|
|
{
|
|
cpufreq_unregister_notifier(&i2c->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
#else
|
|
static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF
|
|
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
|
|
{
|
|
int idx, gpio, ret;
|
|
|
|
if (i2c->quirks & QUIRK_NO_GPIO)
|
|
return 0;
|
|
|
|
for (idx = 0; idx < 2; idx++) {
|
|
gpio = of_get_gpio(i2c->dev->of_node, idx);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
|
|
goto free_gpio;
|
|
}
|
|
i2c->gpios[idx] = gpio;
|
|
|
|
ret = gpio_request(gpio, "i2c-bus");
|
|
if (ret) {
|
|
dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
|
|
goto free_gpio;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
free_gpio:
|
|
while (--idx >= 0)
|
|
gpio_free(i2c->gpios[idx]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
|
|
{
|
|
unsigned int idx;
|
|
|
|
if (i2c->quirks & QUIRK_NO_GPIO)
|
|
return;
|
|
|
|
for (idx = 0; idx < 2; idx++)
|
|
gpio_free(i2c->gpios[idx]);
|
|
}
|
|
#else
|
|
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/* s3c24xx_i2c_init
|
|
*
|
|
* initialise the controller, set the IO lines and frequency
|
|
*/
|
|
|
|
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|
{
|
|
struct s3c2410_platform_i2c *pdata;
|
|
unsigned int freq;
|
|
|
|
/* get the plafrom data */
|
|
|
|
pdata = i2c->pdata;
|
|
|
|
/* write slave address */
|
|
|
|
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
|
|
|
|
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
|
|
|
|
writel(0, i2c->regs + S3C2410_IICCON);
|
|
writel(0, i2c->regs + S3C2410_IICSTAT);
|
|
|
|
/* we need to work out the divisors for the clock... */
|
|
|
|
if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
|
|
dev_err(i2c->dev, "cannot meet bus frequency required\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* todo - check that the i2c lines aren't being dragged anywhere */
|
|
|
|
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
|
|
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02x\n",
|
|
readl(i2c->regs + S3C2410_IICCON));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
/* s3c24xx_i2c_parse_dt
|
|
*
|
|
* Parse the device tree node and retreive the platform data.
|
|
*/
|
|
|
|
static void
|
|
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
|
|
{
|
|
struct s3c2410_platform_i2c *pdata = i2c->pdata;
|
|
int id;
|
|
|
|
if (!np)
|
|
return;
|
|
|
|
pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
|
|
of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
|
|
of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
|
|
of_property_read_u32(np, "samsung,i2c-max-bus-freq",
|
|
(u32 *)&pdata->frequency);
|
|
/*
|
|
* Exynos5's legacy i2c controller and new high speed i2c
|
|
* controller have muxed interrupt sources. By default the
|
|
* interrupts for 4-channel HS-I2C controller are enabled.
|
|
* If nodes for first four channels of legacy i2c controller
|
|
* are available then re-configure the interrupts via the
|
|
* system register.
|
|
*/
|
|
id = of_alias_get_id(np, "i2c");
|
|
i2c->sysreg = syscon_regmap_lookup_by_phandle(np,
|
|
"samsung,sysreg-phandle");
|
|
if (IS_ERR(i2c->sysreg))
|
|
return;
|
|
|
|
regmap_update_bits(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, BIT(id), 0);
|
|
}
|
|
#else
|
|
static void
|
|
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
|
|
{
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* s3c24xx_i2c_probe
|
|
*
|
|
* called by the bus driver when a suitable device is found
|
|
*/
|
|
|
|
static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct s3c24xx_i2c *i2c;
|
|
struct s3c2410_platform_i2c *pdata = NULL;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
if (!pdev->dev.of_node) {
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "no platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!i2c->pdata)
|
|
return -ENOMEM;
|
|
|
|
i2c->quirks = s3c24xx_get_device_quirks(pdev);
|
|
i2c->sysreg = ERR_PTR(-ENOENT);
|
|
if (pdata)
|
|
memcpy(i2c->pdata, pdata, sizeof(*pdata));
|
|
else
|
|
s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
|
|
|
|
strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
|
|
i2c->adap.owner = THIS_MODULE;
|
|
i2c->adap.algo = &s3c24xx_i2c_algorithm;
|
|
i2c->adap.retries = 2;
|
|
i2c->adap.class = I2C_CLASS_DEPRECATED;
|
|
i2c->tx_setup = 50;
|
|
|
|
init_waitqueue_head(&i2c->wait);
|
|
|
|
/* find the clock and enable it */
|
|
|
|
i2c->dev = &pdev->dev;
|
|
i2c->clk = devm_clk_get(&pdev->dev, "i2c");
|
|
if (IS_ERR(i2c->clk)) {
|
|
dev_err(&pdev->dev, "cannot get clock\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
|
|
|
|
|
|
/* map the registers */
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(i2c->regs))
|
|
return PTR_ERR(i2c->regs);
|
|
|
|
dev_dbg(&pdev->dev, "registers %p (%p)\n",
|
|
i2c->regs, res);
|
|
|
|
/* setup info block for the i2c core */
|
|
|
|
i2c->adap.algo_data = i2c;
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
|
|
i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
|
|
|
|
/* inititalise the i2c gpio lines */
|
|
|
|
if (i2c->pdata->cfg_gpio) {
|
|
i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
|
|
} else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* initialise the i2c controller */
|
|
|
|
clk_prepare_enable(i2c->clk);
|
|
ret = s3c24xx_i2c_init(i2c);
|
|
clk_disable(i2c->clk);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "I2C controller init failed\n");
|
|
return ret;
|
|
}
|
|
/* find the IRQ for this unit (note, this relies on the init call to
|
|
* ensure no current IRQs pending
|
|
*/
|
|
|
|
if (!(i2c->quirks & QUIRK_POLL)) {
|
|
i2c->irq = ret = platform_get_irq(pdev, 0);
|
|
if (ret <= 0) {
|
|
dev_err(&pdev->dev, "cannot find IRQ\n");
|
|
clk_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0,
|
|
dev_name(&pdev->dev), i2c);
|
|
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
|
|
clk_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = s3c24xx_i2c_register_cpufreq(i2c);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
|
|
clk_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
/* Note, previous versions of the driver used i2c_add_adapter()
|
|
* to add the bus at any number. We now pass the bus number via
|
|
* the platform data, so if unset it will now default to always
|
|
* being bus 0.
|
|
*/
|
|
|
|
i2c->adap.nr = i2c->pdata->bus_num;
|
|
i2c->adap.dev.of_node = pdev->dev.of_node;
|
|
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = i2c_add_numbered_adapter(&i2c->adap);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
|
|
pm_runtime_disable(&pdev->dev);
|
|
s3c24xx_i2c_deregister_cpufreq(i2c);
|
|
clk_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
|
|
return 0;
|
|
}
|
|
|
|
/* s3c24xx_i2c_remove
|
|
*
|
|
* called when device is removed from the bus
|
|
*/
|
|
|
|
static int s3c24xx_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
clk_unprepare(i2c->clk);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
s3c24xx_i2c_deregister_cpufreq(i2c);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
|
|
s3c24xx_i2c_dt_gpio_free(i2c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int s3c24xx_i2c_suspend_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c->suspended = 1;
|
|
|
|
if (!IS_ERR(i2c->sysreg))
|
|
regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c24xx_i2c_resume_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
if (!IS_ERR(i2c->sysreg))
|
|
regmap_write(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, i2c->sys_i2c_cfg);
|
|
|
|
ret = clk_enable(i2c->clk);
|
|
if (ret)
|
|
return ret;
|
|
s3c24xx_i2c_init(i2c);
|
|
clk_disable(i2c->clk);
|
|
i2c->suspended = 0;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend_noirq = s3c24xx_i2c_suspend_noirq,
|
|
.resume_noirq = s3c24xx_i2c_resume_noirq,
|
|
.freeze_noirq = s3c24xx_i2c_suspend_noirq,
|
|
.thaw_noirq = s3c24xx_i2c_resume_noirq,
|
|
.poweroff_noirq = s3c24xx_i2c_suspend_noirq,
|
|
.restore_noirq = s3c24xx_i2c_resume_noirq,
|
|
#endif
|
|
};
|
|
|
|
#define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops)
|
|
#else
|
|
#define S3C24XX_DEV_PM_OPS NULL
|
|
#endif
|
|
|
|
/* device driver for platform bus bits */
|
|
|
|
static struct platform_driver s3c24xx_i2c_driver = {
|
|
.probe = s3c24xx_i2c_probe,
|
|
.remove = s3c24xx_i2c_remove,
|
|
.id_table = s3c24xx_driver_ids,
|
|
.driver = {
|
|
.name = "s3c-i2c",
|
|
.pm = S3C24XX_DEV_PM_OPS,
|
|
.of_match_table = of_match_ptr(s3c24xx_i2c_match),
|
|
},
|
|
};
|
|
|
|
static int __init i2c_adap_s3c_init(void)
|
|
{
|
|
return platform_driver_register(&s3c24xx_i2c_driver);
|
|
}
|
|
subsys_initcall(i2c_adap_s3c_init);
|
|
|
|
static void __exit i2c_adap_s3c_exit(void)
|
|
{
|
|
platform_driver_unregister(&s3c24xx_i2c_driver);
|
|
}
|
|
module_exit(i2c_adap_s3c_exit);
|
|
|
|
MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
|
|
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
|
|
MODULE_LICENSE("GPL");
|