![Shubhrajyoti Datta](/assets/img/avatar_default.png)
Enable power management. This patch enables the clocks before transfer and disables after the transfer. It also adds the clock description. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
900 lines
25 KiB
C
900 lines
25 KiB
C
/*
|
|
* i2c-xiic.c
|
|
* Copyright (c) 2002-2007 Xilinx Inc.
|
|
* Copyright (c) 2009-2010 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*
|
|
* This code was implemented by Mocean Laboratories AB when porting linux
|
|
* to the automotive development board Russellville. The copyright holder
|
|
* as seen in the header is Intel corporation.
|
|
* Mocean Laboratories forked off the GNU/Linux platform work into a
|
|
* separate company called Pelagicore AB, which committed the code to the
|
|
* kernel.
|
|
*/
|
|
|
|
/* Supports:
|
|
* Xilinx IIC
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/i2c-xiic.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#define DRIVER_NAME "xiic-i2c"
|
|
|
|
enum xilinx_i2c_state {
|
|
STATE_DONE,
|
|
STATE_ERROR,
|
|
STATE_START
|
|
};
|
|
|
|
enum xiic_endian {
|
|
LITTLE,
|
|
BIG
|
|
};
|
|
|
|
/**
|
|
* struct xiic_i2c - Internal representation of the XIIC I2C bus
|
|
* @base: Memory base of the HW registers
|
|
* @wait: Wait queue for callers
|
|
* @adap: Kernel adapter representation
|
|
* @tx_msg: Messages from above to be sent
|
|
* @lock: Mutual exclusion
|
|
* @tx_pos: Current pos in TX message
|
|
* @nmsgs: Number of messages in tx_msg
|
|
* @state: See STATE_
|
|
* @rx_msg: Current RX message
|
|
* @rx_pos: Position within current RX message
|
|
* @endianness: big/little-endian byte order
|
|
*/
|
|
struct xiic_i2c {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
wait_queue_head_t wait;
|
|
struct i2c_adapter adap;
|
|
struct i2c_msg *tx_msg;
|
|
struct mutex lock;
|
|
unsigned int tx_pos;
|
|
unsigned int nmsgs;
|
|
enum xilinx_i2c_state state;
|
|
struct i2c_msg *rx_msg;
|
|
int rx_pos;
|
|
enum xiic_endian endianness;
|
|
struct clk *clk;
|
|
};
|
|
|
|
|
|
#define XIIC_MSB_OFFSET 0
|
|
#define XIIC_REG_OFFSET (0x100+XIIC_MSB_OFFSET)
|
|
|
|
/*
|
|
* Register offsets in bytes from RegisterBase. Three is added to the
|
|
* base offset to access LSB (IBM style) of the word
|
|
*/
|
|
#define XIIC_CR_REG_OFFSET (0x00+XIIC_REG_OFFSET) /* Control Register */
|
|
#define XIIC_SR_REG_OFFSET (0x04+XIIC_REG_OFFSET) /* Status Register */
|
|
#define XIIC_DTR_REG_OFFSET (0x08+XIIC_REG_OFFSET) /* Data Tx Register */
|
|
#define XIIC_DRR_REG_OFFSET (0x0C+XIIC_REG_OFFSET) /* Data Rx Register */
|
|
#define XIIC_ADR_REG_OFFSET (0x10+XIIC_REG_OFFSET) /* Address Register */
|
|
#define XIIC_TFO_REG_OFFSET (0x14+XIIC_REG_OFFSET) /* Tx FIFO Occupancy */
|
|
#define XIIC_RFO_REG_OFFSET (0x18+XIIC_REG_OFFSET) /* Rx FIFO Occupancy */
|
|
#define XIIC_TBA_REG_OFFSET (0x1C+XIIC_REG_OFFSET) /* 10 Bit Address reg */
|
|
#define XIIC_RFD_REG_OFFSET (0x20+XIIC_REG_OFFSET) /* Rx FIFO Depth reg */
|
|
#define XIIC_GPO_REG_OFFSET (0x24+XIIC_REG_OFFSET) /* Output Register */
|
|
|
|
/* Control Register masks */
|
|
#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
|
|
#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
|
|
#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
|
|
#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
|
|
#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
|
|
#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
|
|
#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */
|
|
|
|
/* Status Register masks */
|
|
#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
|
|
#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
|
|
#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
|
|
#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
|
|
#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
|
|
#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
|
|
#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */
|
|
#define XIIC_SR_TX_FIFO_EMPTY_MASK 0x80 /* 1 = Tx FIFO empty */
|
|
|
|
/* Interrupt Status Register masks Interrupt occurs when... */
|
|
#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
|
|
#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete */
|
|
#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
|
|
#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level */
|
|
#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
|
|
#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
|
|
#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
|
|
#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */
|
|
|
|
/* The following constants specify the depth of the FIFOs */
|
|
#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
|
|
#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */
|
|
|
|
/* The following constants specify groups of interrupts that are typically
|
|
* enabled or disables at the same time
|
|
*/
|
|
#define XIIC_TX_INTERRUPTS \
|
|
(XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)
|
|
|
|
#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
|
|
|
|
/* The following constants are used with the following macros to specify the
|
|
* operation, a read or write operation.
|
|
*/
|
|
#define XIIC_READ_OPERATION 1
|
|
#define XIIC_WRITE_OPERATION 0
|
|
|
|
/*
|
|
* Tx Fifo upper bit masks.
|
|
*/
|
|
#define XIIC_TX_DYN_START_MASK 0x0100 /* 1 = Set dynamic start */
|
|
#define XIIC_TX_DYN_STOP_MASK 0x0200 /* 1 = Set dynamic stop */
|
|
|
|
/*
|
|
* The following constants define the register offsets for the Interrupt
|
|
* registers. There are some holes in the memory map for reserved addresses
|
|
* to allow other registers to be added and still match the memory map of the
|
|
* interrupt controller registers
|
|
*/
|
|
#define XIIC_DGIER_OFFSET 0x1C /* Device Global Interrupt Enable Register */
|
|
#define XIIC_IISR_OFFSET 0x20 /* Interrupt Status Register */
|
|
#define XIIC_IIER_OFFSET 0x28 /* Interrupt Enable Register */
|
|
#define XIIC_RESETR_OFFSET 0x40 /* Reset Register */
|
|
|
|
#define XIIC_RESET_MASK 0xAUL
|
|
|
|
#define XIIC_PM_TIMEOUT 1000 /* ms */
|
|
/*
|
|
* The following constant is used for the device global interrupt enable
|
|
* register, to enable all interrupts for the device, this is the only bit
|
|
* in the register
|
|
*/
|
|
#define XIIC_GINTR_ENABLE_MASK 0x80000000UL
|
|
|
|
#define xiic_tx_space(i2c) ((i2c)->tx_msg->len - (i2c)->tx_pos)
|
|
#define xiic_rx_space(i2c) ((i2c)->rx_msg->len - (i2c)->rx_pos)
|
|
|
|
static void xiic_start_xfer(struct xiic_i2c *i2c);
|
|
static void __xiic_start_xfer(struct xiic_i2c *i2c);
|
|
|
|
/*
|
|
* For the register read and write functions, a little-endian and big-endian
|
|
* version are necessary. Endianness is detected during the probe function.
|
|
* Only the least significant byte [doublet] of the register are ever
|
|
* accessed. This requires an offset of 3 [2] from the base address for
|
|
* big-endian systems.
|
|
*/
|
|
|
|
static inline void xiic_setreg8(struct xiic_i2c *i2c, int reg, u8 value)
|
|
{
|
|
if (i2c->endianness == LITTLE)
|
|
iowrite8(value, i2c->base + reg);
|
|
else
|
|
iowrite8(value, i2c->base + reg + 3);
|
|
}
|
|
|
|
static inline u8 xiic_getreg8(struct xiic_i2c *i2c, int reg)
|
|
{
|
|
u8 ret;
|
|
|
|
if (i2c->endianness == LITTLE)
|
|
ret = ioread8(i2c->base + reg);
|
|
else
|
|
ret = ioread8(i2c->base + reg + 3);
|
|
return ret;
|
|
}
|
|
|
|
static inline void xiic_setreg16(struct xiic_i2c *i2c, int reg, u16 value)
|
|
{
|
|
if (i2c->endianness == LITTLE)
|
|
iowrite16(value, i2c->base + reg);
|
|
else
|
|
iowrite16be(value, i2c->base + reg + 2);
|
|
}
|
|
|
|
static inline void xiic_setreg32(struct xiic_i2c *i2c, int reg, int value)
|
|
{
|
|
if (i2c->endianness == LITTLE)
|
|
iowrite32(value, i2c->base + reg);
|
|
else
|
|
iowrite32be(value, i2c->base + reg);
|
|
}
|
|
|
|
static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
|
|
{
|
|
u32 ret;
|
|
|
|
if (i2c->endianness == LITTLE)
|
|
ret = ioread32(i2c->base + reg);
|
|
else
|
|
ret = ioread32be(i2c->base + reg);
|
|
return ret;
|
|
}
|
|
|
|
static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
|
|
{
|
|
u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
|
|
xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier & ~mask);
|
|
}
|
|
|
|
static inline void xiic_irq_en(struct xiic_i2c *i2c, u32 mask)
|
|
{
|
|
u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
|
|
xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier | mask);
|
|
}
|
|
|
|
static inline void xiic_irq_clr(struct xiic_i2c *i2c, u32 mask)
|
|
{
|
|
u32 isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
|
|
xiic_setreg32(i2c, XIIC_IISR_OFFSET, isr & mask);
|
|
}
|
|
|
|
static inline void xiic_irq_clr_en(struct xiic_i2c *i2c, u32 mask)
|
|
{
|
|
xiic_irq_clr(i2c, mask);
|
|
xiic_irq_en(i2c, mask);
|
|
}
|
|
|
|
static void xiic_clear_rx_fifo(struct xiic_i2c *i2c)
|
|
{
|
|
u8 sr;
|
|
for (sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
|
|
!(sr & XIIC_SR_RX_FIFO_EMPTY_MASK);
|
|
sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET))
|
|
xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
|
|
}
|
|
|
|
static void xiic_reinit(struct xiic_i2c *i2c)
|
|
{
|
|
xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
|
|
|
|
/* Set receive Fifo depth to maximum (zero based). */
|
|
xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, IIC_RX_FIFO_DEPTH - 1);
|
|
|
|
/* Reset Tx Fifo. */
|
|
xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
|
|
|
|
/* Enable IIC Device, remove Tx Fifo reset & disable general call. */
|
|
xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_ENABLE_DEVICE_MASK);
|
|
|
|
/* make sure RX fifo is empty */
|
|
xiic_clear_rx_fifo(i2c);
|
|
|
|
/* Enable interrupts */
|
|
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
|
|
|
|
xiic_irq_clr_en(i2c, XIIC_INTR_ARB_LOST_MASK);
|
|
}
|
|
|
|
static void xiic_deinit(struct xiic_i2c *i2c)
|
|
{
|
|
u8 cr;
|
|
|
|
xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
|
|
|
|
/* Disable IIC Device. */
|
|
cr = xiic_getreg8(i2c, XIIC_CR_REG_OFFSET);
|
|
xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, cr & ~XIIC_CR_ENABLE_DEVICE_MASK);
|
|
}
|
|
|
|
static void xiic_read_rx(struct xiic_i2c *i2c)
|
|
{
|
|
u8 bytes_in_fifo;
|
|
int i;
|
|
|
|
bytes_in_fifo = xiic_getreg8(i2c, XIIC_RFO_REG_OFFSET) + 1;
|
|
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s entry, bytes in fifo: %d, msg: %d, SR: 0x%x, CR: 0x%x\n",
|
|
__func__, bytes_in_fifo, xiic_rx_space(i2c),
|
|
xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
|
|
xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
|
|
|
|
if (bytes_in_fifo > xiic_rx_space(i2c))
|
|
bytes_in_fifo = xiic_rx_space(i2c);
|
|
|
|
for (i = 0; i < bytes_in_fifo; i++)
|
|
i2c->rx_msg->buf[i2c->rx_pos++] =
|
|
xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
|
|
|
|
xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET,
|
|
(xiic_rx_space(i2c) > IIC_RX_FIFO_DEPTH) ?
|
|
IIC_RX_FIFO_DEPTH - 1 : xiic_rx_space(i2c) - 1);
|
|
}
|
|
|
|
static int xiic_tx_fifo_space(struct xiic_i2c *i2c)
|
|
{
|
|
/* return the actual space left in the FIFO */
|
|
return IIC_TX_FIFO_DEPTH - xiic_getreg8(i2c, XIIC_TFO_REG_OFFSET) - 1;
|
|
}
|
|
|
|
static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
|
|
{
|
|
u8 fifo_space = xiic_tx_fifo_space(i2c);
|
|
int len = xiic_tx_space(i2c);
|
|
|
|
len = (len > fifo_space) ? fifo_space : len;
|
|
|
|
dev_dbg(i2c->adap.dev.parent, "%s entry, len: %d, fifo space: %d\n",
|
|
__func__, len, fifo_space);
|
|
|
|
while (len--) {
|
|
u16 data = i2c->tx_msg->buf[i2c->tx_pos++];
|
|
if ((xiic_tx_space(i2c) == 0) && (i2c->nmsgs == 1)) {
|
|
/* last message in transfer -> STOP */
|
|
data |= XIIC_TX_DYN_STOP_MASK;
|
|
dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
|
|
}
|
|
xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
|
|
}
|
|
}
|
|
|
|
static void xiic_wakeup(struct xiic_i2c *i2c, int code)
|
|
{
|
|
i2c->tx_msg = NULL;
|
|
i2c->rx_msg = NULL;
|
|
i2c->nmsgs = 0;
|
|
i2c->state = code;
|
|
wake_up(&i2c->wait);
|
|
}
|
|
|
|
static irqreturn_t xiic_process(int irq, void *dev_id)
|
|
{
|
|
struct xiic_i2c *i2c = dev_id;
|
|
u32 pend, isr, ier;
|
|
u32 clr = 0;
|
|
|
|
/* Get the interrupt Status from the IPIF. There is no clearing of
|
|
* interrupts in the IPIF. Interrupts must be cleared at the source.
|
|
* To find which interrupts are pending; AND interrupts pending with
|
|
* interrupts masked.
|
|
*/
|
|
mutex_lock(&i2c->lock);
|
|
isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
|
|
ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
|
|
pend = isr & ier;
|
|
|
|
dev_dbg(i2c->adap.dev.parent, "%s: IER: 0x%x, ISR: 0x%x, pend: 0x%x\n",
|
|
__func__, ier, isr, pend);
|
|
dev_dbg(i2c->adap.dev.parent, "%s: SR: 0x%x, msg: %p, nmsgs: %d\n",
|
|
__func__, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
|
|
i2c->tx_msg, i2c->nmsgs);
|
|
|
|
|
|
/* Service requesting interrupt */
|
|
if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
|
|
((pend & XIIC_INTR_TX_ERROR_MASK) &&
|
|
!(pend & XIIC_INTR_RX_FULL_MASK))) {
|
|
/* bus arbritration lost, or...
|
|
* Transmit error _OR_ RX completed
|
|
* if this happens when RX_FULL is not set
|
|
* this is probably a TX error
|
|
*/
|
|
|
|
dev_dbg(i2c->adap.dev.parent, "%s error\n", __func__);
|
|
|
|
/* dynamic mode seem to suffer from problems if we just flushes
|
|
* fifos and the next message is a TX with len 0 (only addr)
|
|
* reset the IP instead of just flush fifos
|
|
*/
|
|
xiic_reinit(i2c);
|
|
|
|
if (i2c->rx_msg)
|
|
xiic_wakeup(i2c, STATE_ERROR);
|
|
if (i2c->tx_msg)
|
|
xiic_wakeup(i2c, STATE_ERROR);
|
|
}
|
|
if (pend & XIIC_INTR_RX_FULL_MASK) {
|
|
/* Receive register/FIFO is full */
|
|
|
|
clr |= XIIC_INTR_RX_FULL_MASK;
|
|
if (!i2c->rx_msg) {
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s unexpexted RX IRQ\n", __func__);
|
|
xiic_clear_rx_fifo(i2c);
|
|
goto out;
|
|
}
|
|
|
|
xiic_read_rx(i2c);
|
|
if (xiic_rx_space(i2c) == 0) {
|
|
/* this is the last part of the message */
|
|
i2c->rx_msg = NULL;
|
|
|
|
/* also clear TX error if there (RX complete) */
|
|
clr |= (isr & XIIC_INTR_TX_ERROR_MASK);
|
|
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s end of message, nmsgs: %d\n",
|
|
__func__, i2c->nmsgs);
|
|
|
|
/* send next message if this wasn't the last,
|
|
* otherwise the transfer will be finialise when
|
|
* receiving the bus not busy interrupt
|
|
*/
|
|
if (i2c->nmsgs > 1) {
|
|
i2c->nmsgs--;
|
|
i2c->tx_msg++;
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s will start next...\n", __func__);
|
|
|
|
__xiic_start_xfer(i2c);
|
|
}
|
|
}
|
|
}
|
|
if (pend & XIIC_INTR_BNB_MASK) {
|
|
/* IIC bus has transitioned to not busy */
|
|
clr |= XIIC_INTR_BNB_MASK;
|
|
|
|
/* The bus is not busy, disable BusNotBusy interrupt */
|
|
xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
|
|
|
|
if (!i2c->tx_msg)
|
|
goto out;
|
|
|
|
if ((i2c->nmsgs == 1) && !i2c->rx_msg &&
|
|
xiic_tx_space(i2c) == 0)
|
|
xiic_wakeup(i2c, STATE_DONE);
|
|
else
|
|
xiic_wakeup(i2c, STATE_ERROR);
|
|
}
|
|
if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
|
|
/* Transmit register/FIFO is empty or ½ empty */
|
|
|
|
clr |= (pend &
|
|
(XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK));
|
|
|
|
if (!i2c->tx_msg) {
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s unexpexted TX IRQ\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
xiic_fill_tx_fifo(i2c);
|
|
|
|
/* current message sent and there is space in the fifo */
|
|
if (!xiic_tx_space(i2c) && xiic_tx_fifo_space(i2c) >= 2) {
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s end of message sent, nmsgs: %d\n",
|
|
__func__, i2c->nmsgs);
|
|
if (i2c->nmsgs > 1) {
|
|
i2c->nmsgs--;
|
|
i2c->tx_msg++;
|
|
__xiic_start_xfer(i2c);
|
|
} else {
|
|
xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
|
|
|
|
dev_dbg(i2c->adap.dev.parent,
|
|
"%s Got TX IRQ but no more to do...\n",
|
|
__func__);
|
|
}
|
|
} else if (!xiic_tx_space(i2c) && (i2c->nmsgs == 1))
|
|
/* current frame is sent and is last,
|
|
* make sure to disable tx half
|
|
*/
|
|
xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
|
|
}
|
|
out:
|
|
dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);
|
|
|
|
xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr);
|
|
mutex_unlock(&i2c->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int xiic_bus_busy(struct xiic_i2c *i2c)
|
|
{
|
|
u8 sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
|
|
|
|
return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0;
|
|
}
|
|
|
|
static int xiic_busy(struct xiic_i2c *i2c)
|
|
{
|
|
int tries = 3;
|
|
int err;
|
|
|
|
if (i2c->tx_msg)
|
|
return -EBUSY;
|
|
|
|
/* for instance if previous transfer was terminated due to TX error
|
|
* it might be that the bus is on it's way to become available
|
|
* give it at most 3 ms to wake
|
|
*/
|
|
err = xiic_bus_busy(i2c);
|
|
while (err && tries--) {
|
|
msleep(1);
|
|
err = xiic_bus_busy(i2c);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void xiic_start_recv(struct xiic_i2c *i2c)
|
|
{
|
|
u8 rx_watermark;
|
|
struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
|
|
|
|
/* Clear and enable Rx full interrupt. */
|
|
xiic_irq_clr_en(i2c, XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK);
|
|
|
|
/* we want to get all but last byte, because the TX_ERROR IRQ is used
|
|
* to inidicate error ACK on the address, and negative ack on the last
|
|
* received byte, so to not mix them receive all but last.
|
|
* In the case where there is only one byte to receive
|
|
* we can check if ERROR and RX full is set at the same time
|
|
*/
|
|
rx_watermark = msg->len;
|
|
if (rx_watermark > IIC_RX_FIFO_DEPTH)
|
|
rx_watermark = IIC_RX_FIFO_DEPTH;
|
|
xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, rx_watermark - 1);
|
|
|
|
if (!(msg->flags & I2C_M_NOSTART))
|
|
/* write the address */
|
|
xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
|
|
(msg->addr << 1) | XIIC_READ_OPERATION |
|
|
XIIC_TX_DYN_START_MASK);
|
|
|
|
xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
|
|
|
|
xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
|
|
msg->len | ((i2c->nmsgs == 1) ? XIIC_TX_DYN_STOP_MASK : 0));
|
|
if (i2c->nmsgs == 1)
|
|
/* very last, enable bus not busy as well */
|
|
xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
|
|
|
|
/* the message is tx:ed */
|
|
i2c->tx_pos = msg->len;
|
|
}
|
|
|
|
static void xiic_start_send(struct xiic_i2c *i2c)
|
|
{
|
|
struct i2c_msg *msg = i2c->tx_msg;
|
|
|
|
xiic_irq_clr(i2c, XIIC_INTR_TX_ERROR_MASK);
|
|
|
|
dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d",
|
|
__func__, msg, msg->len);
|
|
dev_dbg(i2c->adap.dev.parent, "%s entry, ISR: 0x%x, CR: 0x%x\n",
|
|
__func__, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
|
|
xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
|
|
|
|
if (!(msg->flags & I2C_M_NOSTART)) {
|
|
/* write the address */
|
|
u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
|
|
XIIC_TX_DYN_START_MASK;
|
|
if ((i2c->nmsgs == 1) && msg->len == 0)
|
|
/* no data and last message -> add STOP */
|
|
data |= XIIC_TX_DYN_STOP_MASK;
|
|
|
|
xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
|
|
}
|
|
|
|
xiic_fill_tx_fifo(i2c);
|
|
|
|
/* Clear any pending Tx empty, Tx Error and then enable them. */
|
|
xiic_irq_clr_en(i2c, XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_ERROR_MASK |
|
|
XIIC_INTR_BNB_MASK);
|
|
}
|
|
|
|
static irqreturn_t xiic_isr(int irq, void *dev_id)
|
|
{
|
|
struct xiic_i2c *i2c = dev_id;
|
|
u32 pend, isr, ier;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
/* Do not processes a devices interrupts if the device has no
|
|
* interrupts pending
|
|
*/
|
|
|
|
dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__);
|
|
|
|
isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
|
|
ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
|
|
pend = isr & ier;
|
|
if (pend)
|
|
ret = IRQ_WAKE_THREAD;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __xiic_start_xfer(struct xiic_i2c *i2c)
|
|
{
|
|
int first = 1;
|
|
int fifo_space = xiic_tx_fifo_space(i2c);
|
|
dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, fifos space: %d\n",
|
|
__func__, i2c->tx_msg, fifo_space);
|
|
|
|
if (!i2c->tx_msg)
|
|
return;
|
|
|
|
i2c->rx_pos = 0;
|
|
i2c->tx_pos = 0;
|
|
i2c->state = STATE_START;
|
|
while ((fifo_space >= 2) && (first || (i2c->nmsgs > 1))) {
|
|
if (!first) {
|
|
i2c->nmsgs--;
|
|
i2c->tx_msg++;
|
|
i2c->tx_pos = 0;
|
|
} else
|
|
first = 0;
|
|
|
|
if (i2c->tx_msg->flags & I2C_M_RD) {
|
|
/* we dont date putting several reads in the FIFO */
|
|
xiic_start_recv(i2c);
|
|
return;
|
|
} else {
|
|
xiic_start_send(i2c);
|
|
if (xiic_tx_space(i2c) != 0) {
|
|
/* the message could not be completely sent */
|
|
break;
|
|
}
|
|
}
|
|
|
|
fifo_space = xiic_tx_fifo_space(i2c);
|
|
}
|
|
|
|
/* there are more messages or the current one could not be completely
|
|
* put into the FIFO, also enable the half empty interrupt
|
|
*/
|
|
if (i2c->nmsgs > 1 || xiic_tx_space(i2c))
|
|
xiic_irq_clr_en(i2c, XIIC_INTR_TX_HALF_MASK);
|
|
|
|
}
|
|
|
|
static void xiic_start_xfer(struct xiic_i2c *i2c)
|
|
{
|
|
mutex_lock(&i2c->lock);
|
|
xiic_reinit(i2c);
|
|
__xiic_start_xfer(i2c);
|
|
mutex_unlock(&i2c->lock);
|
|
}
|
|
|
|
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct xiic_i2c *i2c = i2c_get_adapdata(adap);
|
|
int err;
|
|
|
|
dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
|
|
xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
|
|
|
|
err = pm_runtime_get_sync(i2c->dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = xiic_busy(i2c);
|
|
if (err)
|
|
goto out;
|
|
|
|
i2c->tx_msg = msgs;
|
|
i2c->nmsgs = num;
|
|
|
|
xiic_start_xfer(i2c);
|
|
|
|
if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
|
|
(i2c->state == STATE_DONE), HZ)) {
|
|
err = (i2c->state == STATE_DONE) ? num : -EIO;
|
|
goto out;
|
|
} else {
|
|
i2c->tx_msg = NULL;
|
|
i2c->rx_msg = NULL;
|
|
i2c->nmsgs = 0;
|
|
err = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
out:
|
|
pm_runtime_mark_last_busy(i2c->dev);
|
|
pm_runtime_put_autosuspend(i2c->dev);
|
|
return err;
|
|
}
|
|
|
|
static u32 xiic_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm xiic_algorithm = {
|
|
.master_xfer = xiic_xfer,
|
|
.functionality = xiic_func,
|
|
};
|
|
|
|
static struct i2c_adapter xiic_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = DRIVER_NAME,
|
|
.class = I2C_CLASS_DEPRECATED,
|
|
.algo = &xiic_algorithm,
|
|
};
|
|
|
|
|
|
static int xiic_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct xiic_i2c *i2c;
|
|
struct xiic_i2c_platform_data *pdata;
|
|
struct resource *res;
|
|
int ret, irq;
|
|
u8 i;
|
|
u32 sr;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(i2c->base))
|
|
return PTR_ERR(i2c->base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
|
|
/* hook up driver to tree */
|
|
platform_set_drvdata(pdev, i2c);
|
|
i2c->adap = xiic_adapter;
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
i2c->adap.dev.of_node = pdev->dev.of_node;
|
|
|
|
mutex_init(&i2c->lock);
|
|
init_waitqueue_head(&i2c->wait);
|
|
|
|
i2c->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c->clk)) {
|
|
dev_err(&pdev->dev, "input clock not found.\n");
|
|
return PTR_ERR(i2c->clk);
|
|
}
|
|
ret = clk_prepare_enable(i2c->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to enable clock.\n");
|
|
return ret;
|
|
}
|
|
i2c->dev = &pdev->dev;
|
|
pm_runtime_enable(i2c->dev);
|
|
pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
|
|
pm_runtime_use_autosuspend(i2c->dev);
|
|
pm_runtime_set_active(i2c->dev);
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr,
|
|
xiic_process, IRQF_ONESHOT,
|
|
pdev->name, i2c);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Cannot claim IRQ\n");
|
|
goto err_clk_dis;
|
|
}
|
|
|
|
/*
|
|
* Detect endianness
|
|
* Try to reset the TX FIFO. Then check the EMPTY flag. If it is not
|
|
* set, assume that the endianness was wrong and swap.
|
|
*/
|
|
i2c->endianness = LITTLE;
|
|
xiic_setreg32(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
|
|
/* Reset is cleared in xiic_reinit */
|
|
sr = xiic_getreg32(i2c, XIIC_SR_REG_OFFSET);
|
|
if (!(sr & XIIC_SR_TX_FIFO_EMPTY_MASK))
|
|
i2c->endianness = BIG;
|
|
|
|
xiic_reinit(i2c);
|
|
|
|
/* add i2c adapter to i2c tree */
|
|
ret = i2c_add_adapter(&i2c->adap);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add adapter\n");
|
|
xiic_deinit(i2c);
|
|
goto err_clk_dis;
|
|
}
|
|
|
|
if (pdata) {
|
|
/* add in known devices to the bus */
|
|
for (i = 0; i < pdata->num_devices; i++)
|
|
i2c_new_device(&i2c->adap, pdata->devices + i);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk_dis:
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
clk_disable_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int xiic_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct xiic_i2c *i2c = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
/* remove adapter & data */
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
ret = clk_prepare_enable(i2c->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to enable clock.\n");
|
|
return ret;
|
|
}
|
|
xiic_deinit(i2c);
|
|
clk_disable_unprepare(i2c->clk);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id xiic_of_match[] = {
|
|
{ .compatible = "xlnx,xps-iic-2.00.a", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xiic_of_match);
|
|
#endif
|
|
|
|
static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct xiic_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
clk_disable(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct xiic_i2c *i2c = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = clk_enable(i2c->clk);
|
|
if (ret) {
|
|
dev_err(dev, "Cannot enable clock.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops xiic_dev_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(cdns_i2c_runtime_suspend,
|
|
cdns_i2c_runtime_resume, NULL)
|
|
};
|
|
static struct platform_driver xiic_i2c_driver = {
|
|
.probe = xiic_i2c_probe,
|
|
.remove = xiic_i2c_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = of_match_ptr(xiic_of_match),
|
|
.pm = &xiic_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xiic_i2c_driver);
|
|
|
|
MODULE_AUTHOR("info@mocean-labs.com");
|
|
MODULE_DESCRIPTION("Xilinx I2C bus driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:"DRIVER_NAME);
|