![Nathaniel W Filardo](/assets/img/avatar_default.png)
Add USB VID/PID for Xircom PGMFHUB USB/serial component. (The hub and SCSI bridge on that hardware are recognized out of the box by existing drivers.) Tested VID/PID using new_id and loopback connection and was met with success, but that's all the testing done. Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
799 lines
21 KiB
C
799 lines
21 KiB
C
/*
|
|
* USB Keyspan PDA / Xircom / Entrega Converter driver
|
|
*
|
|
* Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com>
|
|
* Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com>
|
|
* Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* See Documentation/usb/usb-serial.txt for more information on using this
|
|
* driver
|
|
*/
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_driver.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
#include <linux/usb/ezusb.h>
|
|
|
|
/* make a simple define to handle if we are compiling keyspan_pda or xircom support */
|
|
#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
|
|
#define KEYSPAN
|
|
#else
|
|
#undef KEYSPAN
|
|
#endif
|
|
#if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE)
|
|
#define XIRCOM
|
|
#else
|
|
#undef XIRCOM
|
|
#endif
|
|
|
|
#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
|
|
#define DRIVER_DESC "USB Keyspan PDA Converter driver"
|
|
|
|
struct keyspan_pda_private {
|
|
int tx_room;
|
|
int tx_throttled;
|
|
struct work_struct wakeup_work;
|
|
struct work_struct unthrottle_work;
|
|
struct usb_serial *serial;
|
|
struct usb_serial_port *port;
|
|
};
|
|
|
|
|
|
#define KEYSPAN_VENDOR_ID 0x06cd
|
|
#define KEYSPAN_PDA_FAKE_ID 0x0103
|
|
#define KEYSPAN_PDA_ID 0x0104 /* no clue */
|
|
|
|
/* For Xircom PGSDB9 and older Entrega version of the same device */
|
|
#define XIRCOM_VENDOR_ID 0x085a
|
|
#define XIRCOM_FAKE_ID 0x8027
|
|
#define XIRCOM_FAKE_ID_2 0x8025 /* "PGMFHUB" serial */
|
|
#define ENTREGA_VENDOR_ID 0x1645
|
|
#define ENTREGA_FAKE_ID 0x8093
|
|
|
|
static const struct usb_device_id id_table_combined[] = {
|
|
#ifdef KEYSPAN
|
|
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
|
|
#endif
|
|
#ifdef XIRCOM
|
|
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
|
|
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
|
|
{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
|
|
#endif
|
|
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, id_table_combined);
|
|
|
|
static const struct usb_device_id id_table_std[] = {
|
|
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
#ifdef KEYSPAN
|
|
static const struct usb_device_id id_table_fake[] = {
|
|
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
#endif
|
|
|
|
#ifdef XIRCOM
|
|
static const struct usb_device_id id_table_fake_xircom[] = {
|
|
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
|
|
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
|
|
{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
|
|
{ }
|
|
};
|
|
#endif
|
|
|
|
static void keyspan_pda_wakeup_write(struct work_struct *work)
|
|
{
|
|
struct keyspan_pda_private *priv =
|
|
container_of(work, struct keyspan_pda_private, wakeup_work);
|
|
struct usb_serial_port *port = priv->port;
|
|
|
|
tty_port_tty_wakeup(&port->port);
|
|
}
|
|
|
|
static void keyspan_pda_request_unthrottle(struct work_struct *work)
|
|
{
|
|
struct keyspan_pda_private *priv =
|
|
container_of(work, struct keyspan_pda_private, unthrottle_work);
|
|
struct usb_serial *serial = priv->serial;
|
|
int result;
|
|
|
|
/* ask the device to tell us when the tx buffer becomes
|
|
sufficiently empty */
|
|
result = usb_control_msg(serial->dev,
|
|
usb_sndctrlpipe(serial->dev, 0),
|
|
7, /* request_unthrottle */
|
|
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
|
|
| USB_DIR_OUT,
|
|
16, /* value: threshold */
|
|
0, /* index */
|
|
NULL,
|
|
0,
|
|
2000);
|
|
if (result < 0)
|
|
dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n",
|
|
__func__, result);
|
|
}
|
|
|
|
|
|
static void keyspan_pda_rx_interrupt(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = urb->context;
|
|
unsigned char *data = urb->transfer_buffer;
|
|
int retval;
|
|
int status = urb->status;
|
|
struct keyspan_pda_private *priv;
|
|
priv = usb_get_serial_port_data(port);
|
|
|
|
switch (status) {
|
|
case 0:
|
|
/* success */
|
|
break;
|
|
case -ECONNRESET:
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
/* this urb is terminated, clean up */
|
|
dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
|
|
return;
|
|
default:
|
|
dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
|
|
goto exit;
|
|
}
|
|
|
|
/* see if the message is data or a status interrupt */
|
|
switch (data[0]) {
|
|
case 0:
|
|
/* rest of message is rx data */
|
|
if (urb->actual_length) {
|
|
tty_insert_flip_string(&port->port, data + 1,
|
|
urb->actual_length - 1);
|
|
tty_flip_buffer_push(&port->port);
|
|
}
|
|
break;
|
|
case 1:
|
|
/* status interrupt */
|
|
dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]);
|
|
switch (data[1]) {
|
|
case 1: /* modemline change */
|
|
break;
|
|
case 2: /* tx unthrottle interrupt */
|
|
priv->tx_throttled = 0;
|
|
/* queue up a wakeup at scheduler time */
|
|
schedule_work(&priv->wakeup_work);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
exit:
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (retval)
|
|
dev_err(&port->dev,
|
|
"%s - usb_submit_urb failed with result %d\n",
|
|
__func__, retval);
|
|
}
|
|
|
|
|
|
static void keyspan_pda_rx_throttle(struct tty_struct *tty)
|
|
{
|
|
/* stop receiving characters. We just turn off the URB request, and
|
|
let chars pile up in the device. If we're doing hardware
|
|
flowcontrol, the device will signal the other end when its buffer
|
|
fills up. If we're doing XON/XOFF, this would be a good time to
|
|
send an XOFF, although it might make sense to foist that off
|
|
upon the device too. */
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
}
|
|
|
|
|
|
static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
/* just restart the receive interrupt URB */
|
|
|
|
if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
|
|
dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n");
|
|
}
|
|
|
|
|
|
static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
|
|
{
|
|
int rc;
|
|
int bindex;
|
|
|
|
switch (baud) {
|
|
case 110:
|
|
bindex = 0;
|
|
break;
|
|
case 300:
|
|
bindex = 1;
|
|
break;
|
|
case 1200:
|
|
bindex = 2;
|
|
break;
|
|
case 2400:
|
|
bindex = 3;
|
|
break;
|
|
case 4800:
|
|
bindex = 4;
|
|
break;
|
|
case 9600:
|
|
bindex = 5;
|
|
break;
|
|
case 19200:
|
|
bindex = 6;
|
|
break;
|
|
case 38400:
|
|
bindex = 7;
|
|
break;
|
|
case 57600:
|
|
bindex = 8;
|
|
break;
|
|
case 115200:
|
|
bindex = 9;
|
|
break;
|
|
default:
|
|
bindex = 5; /* Default to 9600 */
|
|
baud = 9600;
|
|
}
|
|
|
|
/* rather than figure out how to sleep while waiting for this
|
|
to complete, I just use the "legacy" API. */
|
|
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
|
0, /* set baud */
|
|
USB_TYPE_VENDOR
|
|
| USB_RECIP_INTERFACE
|
|
| USB_DIR_OUT, /* type */
|
|
bindex, /* value */
|
|
0, /* index */
|
|
NULL, /* &data */
|
|
0, /* size */
|
|
2000); /* timeout */
|
|
if (rc < 0)
|
|
return 0;
|
|
return baud;
|
|
}
|
|
|
|
|
|
static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct usb_serial *serial = port->serial;
|
|
int value;
|
|
int result;
|
|
|
|
if (break_state == -1)
|
|
value = 1; /* start break */
|
|
else
|
|
value = 0; /* clear break */
|
|
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
|
4, /* set break */
|
|
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
|
|
value, 0, NULL, 0, 2000);
|
|
if (result < 0)
|
|
dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n",
|
|
__func__, result);
|
|
/* there is something funky about this.. the TCSBRK that 'cu' performs
|
|
ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
|
|
seconds apart, but it feels like the break sent isn't as long as it
|
|
is on /dev/ttyS0 */
|
|
}
|
|
|
|
|
|
static void keyspan_pda_set_termios(struct tty_struct *tty,
|
|
struct usb_serial_port *port, struct ktermios *old_termios)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
speed_t speed;
|
|
|
|
/* cflag specifies lots of stuff: number of stop bits, parity, number
|
|
of data bits, baud. What can the device actually handle?:
|
|
CSTOPB (1 stop bit or 2)
|
|
PARENB (parity)
|
|
CSIZE (5bit .. 8bit)
|
|
There is minimal hw support for parity (a PSW bit seems to hold the
|
|
parity of whatever is in the accumulator). The UART either deals
|
|
with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
|
|
1 special, stop). So, with firmware changes, we could do:
|
|
8N1: 10 bit
|
|
8N2: 11 bit, extra bit always (mark?)
|
|
8[EOMS]1: 11 bit, extra bit is parity
|
|
7[EOMS]1: 10 bit, b0/b7 is parity
|
|
7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
|
|
|
|
HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
|
|
bit.
|
|
|
|
For now, just do baud. */
|
|
|
|
speed = tty_get_baud_rate(tty);
|
|
speed = keyspan_pda_setbaud(serial, speed);
|
|
|
|
if (speed == 0) {
|
|
dev_dbg(&port->dev, "can't handle requested baud rate\n");
|
|
/* It hasn't changed so.. */
|
|
speed = tty_termios_baud_rate(old_termios);
|
|
}
|
|
/* Only speed can change so copy the old h/w parameters
|
|
then encode the new speed */
|
|
tty_termios_copy_hw(&tty->termios, old_termios);
|
|
tty_encode_baud_rate(tty, speed, speed);
|
|
}
|
|
|
|
|
|
/* modem control pins: DTR and RTS are outputs and can be controlled.
|
|
DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
|
|
read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused */
|
|
|
|
static int keyspan_pda_get_modem_info(struct usb_serial *serial,
|
|
unsigned char *value)
|
|
{
|
|
int rc;
|
|
u8 *data;
|
|
|
|
data = kmalloc(1, GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
|
|
3, /* get pins */
|
|
USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
|
|
0, 0, data, 1, 2000);
|
|
if (rc >= 0)
|
|
*value = *data;
|
|
|
|
kfree(data);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int keyspan_pda_set_modem_info(struct usb_serial *serial,
|
|
unsigned char value)
|
|
{
|
|
int rc;
|
|
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
|
|
3, /* set pins */
|
|
USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT,
|
|
value, 0, NULL, 0, 2000);
|
|
return rc;
|
|
}
|
|
|
|
static int keyspan_pda_tiocmget(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct usb_serial *serial = port->serial;
|
|
int rc;
|
|
unsigned char status;
|
|
int value;
|
|
|
|
rc = keyspan_pda_get_modem_info(serial, &status);
|
|
if (rc < 0)
|
|
return rc;
|
|
value =
|
|
((status & (1<<7)) ? TIOCM_DTR : 0) |
|
|
((status & (1<<6)) ? TIOCM_CAR : 0) |
|
|
((status & (1<<5)) ? TIOCM_RNG : 0) |
|
|
((status & (1<<4)) ? TIOCM_DSR : 0) |
|
|
((status & (1<<3)) ? TIOCM_CTS : 0) |
|
|
((status & (1<<2)) ? TIOCM_RTS : 0);
|
|
return value;
|
|
}
|
|
|
|
static int keyspan_pda_tiocmset(struct tty_struct *tty,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct usb_serial *serial = port->serial;
|
|
int rc;
|
|
unsigned char status;
|
|
|
|
rc = keyspan_pda_get_modem_info(serial, &status);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (set & TIOCM_RTS)
|
|
status |= (1<<2);
|
|
if (set & TIOCM_DTR)
|
|
status |= (1<<7);
|
|
|
|
if (clear & TIOCM_RTS)
|
|
status &= ~(1<<2);
|
|
if (clear & TIOCM_DTR)
|
|
status &= ~(1<<7);
|
|
rc = keyspan_pda_set_modem_info(serial, status);
|
|
return rc;
|
|
}
|
|
|
|
static int keyspan_pda_write(struct tty_struct *tty,
|
|
struct usb_serial_port *port, const unsigned char *buf, int count)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
int request_unthrottle = 0;
|
|
int rc = 0;
|
|
struct keyspan_pda_private *priv;
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
/* guess how much room is left in the device's ring buffer, and if we
|
|
want to send more than that, check first, updating our notion of
|
|
what is left. If our write will result in no room left, ask the
|
|
device to give us an interrupt when the room available rises above
|
|
a threshold, and hold off all writers (eventually, those using
|
|
select() or poll() too) until we receive that unthrottle interrupt.
|
|
Block if we can't write anything at all, otherwise write as much as
|
|
we can. */
|
|
if (count == 0) {
|
|
dev_dbg(&port->dev, "write request of 0 bytes\n");
|
|
return 0;
|
|
}
|
|
|
|
/* we might block because of:
|
|
the TX urb is in-flight (wait until it completes)
|
|
the device is full (wait until it says there is room)
|
|
*/
|
|
spin_lock_bh(&port->lock);
|
|
if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) {
|
|
spin_unlock_bh(&port->lock);
|
|
return 0;
|
|
}
|
|
clear_bit(0, &port->write_urbs_free);
|
|
spin_unlock_bh(&port->lock);
|
|
|
|
/* At this point the URB is in our control, nobody else can submit it
|
|
again (the only sudden transition was the one from EINPROGRESS to
|
|
finished). Also, the tx process is not throttled. So we are
|
|
ready to write. */
|
|
|
|
count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
|
|
|
|
/* Check if we might overrun the Tx buffer. If so, ask the
|
|
device how much room it really has. This is done only on
|
|
scheduler time, since usb_control_msg() sleeps. */
|
|
if (count > priv->tx_room && !in_interrupt()) {
|
|
u8 *room;
|
|
|
|
room = kmalloc(1, GFP_KERNEL);
|
|
if (!room) {
|
|
rc = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
rc = usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
6, /* write_room */
|
|
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
|
|
| USB_DIR_IN,
|
|
0, /* value: 0 means "remaining room" */
|
|
0, /* index */
|
|
room,
|
|
1,
|
|
2000);
|
|
if (rc > 0) {
|
|
dev_dbg(&port->dev, "roomquery says %d\n", *room);
|
|
priv->tx_room = *room;
|
|
}
|
|
kfree(room);
|
|
if (rc < 0) {
|
|
dev_dbg(&port->dev, "roomquery failed\n");
|
|
goto exit;
|
|
}
|
|
if (rc == 0) {
|
|
dev_dbg(&port->dev, "roomquery returned 0 bytes\n");
|
|
rc = -EIO; /* device didn't return any data */
|
|
goto exit;
|
|
}
|
|
}
|
|
if (count > priv->tx_room) {
|
|
/* we're about to completely fill the Tx buffer, so
|
|
we'll be throttled afterwards. */
|
|
count = priv->tx_room;
|
|
request_unthrottle = 1;
|
|
}
|
|
|
|
if (count) {
|
|
/* now transfer data */
|
|
memcpy(port->write_urb->transfer_buffer, buf, count);
|
|
/* send the data out the bulk port */
|
|
port->write_urb->transfer_buffer_length = count;
|
|
|
|
priv->tx_room -= count;
|
|
|
|
rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
|
|
if (rc) {
|
|
dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
|
|
goto exit;
|
|
}
|
|
} else {
|
|
/* There wasn't any room left, so we are throttled until
|
|
the buffer empties a bit */
|
|
request_unthrottle = 1;
|
|
}
|
|
|
|
if (request_unthrottle) {
|
|
priv->tx_throttled = 1; /* block writers */
|
|
schedule_work(&priv->unthrottle_work);
|
|
}
|
|
|
|
rc = count;
|
|
exit:
|
|
if (rc < 0)
|
|
set_bit(0, &port->write_urbs_free);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void keyspan_pda_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port = urb->context;
|
|
struct keyspan_pda_private *priv;
|
|
|
|
set_bit(0, &port->write_urbs_free);
|
|
priv = usb_get_serial_port_data(port);
|
|
|
|
/* queue up a wakeup at scheduler time */
|
|
schedule_work(&priv->wakeup_work);
|
|
}
|
|
|
|
|
|
static int keyspan_pda_write_room(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct keyspan_pda_private *priv;
|
|
priv = usb_get_serial_port_data(port);
|
|
/* used by n_tty.c for processing of tabs and such. Giving it our
|
|
conservative guess is probably good enough, but needs testing by
|
|
running a console through the device. */
|
|
return priv->tx_room;
|
|
}
|
|
|
|
|
|
static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
struct keyspan_pda_private *priv;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
|
|
/* when throttled, return at least WAKEUP_CHARS to tell select() (via
|
|
n_tty.c:normal_poll() ) that we're not writeable. */
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled)
|
|
ret = 256;
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
|
|
if (on)
|
|
keyspan_pda_set_modem_info(serial, (1 << 7) | (1 << 2));
|
|
else
|
|
keyspan_pda_set_modem_info(serial, 0);
|
|
}
|
|
|
|
|
|
static int keyspan_pda_open(struct tty_struct *tty,
|
|
struct usb_serial_port *port)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
u8 *room;
|
|
int rc = 0;
|
|
struct keyspan_pda_private *priv;
|
|
|
|
/* find out how much room is in the Tx ring */
|
|
room = kmalloc(1, GFP_KERNEL);
|
|
if (!room)
|
|
return -ENOMEM;
|
|
|
|
rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
|
|
6, /* write_room */
|
|
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
|
|
| USB_DIR_IN,
|
|
0, /* value */
|
|
0, /* index */
|
|
room,
|
|
1,
|
|
2000);
|
|
if (rc < 0) {
|
|
dev_dbg(&port->dev, "%s - roomquery failed\n", __func__);
|
|
goto error;
|
|
}
|
|
if (rc == 0) {
|
|
dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__);
|
|
rc = -EIO;
|
|
goto error;
|
|
}
|
|
priv = usb_get_serial_port_data(port);
|
|
priv->tx_room = *room;
|
|
priv->tx_throttled = *room ? 0 : 1;
|
|
|
|
/*Start reading from the device*/
|
|
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
if (rc) {
|
|
dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__);
|
|
goto error;
|
|
}
|
|
error:
|
|
kfree(room);
|
|
return rc;
|
|
}
|
|
static void keyspan_pda_close(struct usb_serial_port *port)
|
|
{
|
|
usb_kill_urb(port->write_urb);
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
}
|
|
|
|
|
|
/* download the firmware to a "fake" device (pre-renumeration) */
|
|
static int keyspan_pda_fake_startup(struct usb_serial *serial)
|
|
{
|
|
int response;
|
|
const char *fw_name;
|
|
|
|
/* download the firmware here ... */
|
|
response = ezusb_fx1_set_reset(serial->dev, 1);
|
|
|
|
if (0) { ; }
|
|
#ifdef KEYSPAN
|
|
else if (le16_to_cpu(serial->dev->descriptor.idVendor) == KEYSPAN_VENDOR_ID)
|
|
fw_name = "keyspan_pda/keyspan_pda.fw";
|
|
#endif
|
|
#ifdef XIRCOM
|
|
else if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) ||
|
|
(le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGA_VENDOR_ID))
|
|
fw_name = "keyspan_pda/xircom_pgs.fw";
|
|
#endif
|
|
else {
|
|
dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
|
|
dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
|
|
fw_name);
|
|
return -ENOENT;
|
|
}
|
|
|
|
/* after downloading firmware Renumeration will occur in a
|
|
moment and the new device will bind to the real driver */
|
|
|
|
/* we want this device to fail to have a driver assigned to it. */
|
|
return 1;
|
|
}
|
|
|
|
#ifdef KEYSPAN
|
|
MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
|
|
#endif
|
|
#ifdef XIRCOM
|
|
MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
|
|
#endif
|
|
|
|
static int keyspan_pda_port_probe(struct usb_serial_port *port)
|
|
{
|
|
|
|
struct keyspan_pda_private *priv;
|
|
|
|
priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
|
|
INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
|
|
priv->serial = port->serial;
|
|
priv->port = port;
|
|
|
|
usb_set_serial_port_data(port, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int keyspan_pda_port_remove(struct usb_serial_port *port)
|
|
{
|
|
struct keyspan_pda_private *priv;
|
|
|
|
priv = usb_get_serial_port_data(port);
|
|
kfree(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef KEYSPAN
|
|
static struct usb_serial_driver keyspan_pda_fake_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "keyspan_pda_pre",
|
|
},
|
|
.description = "Keyspan PDA - (prerenumeration)",
|
|
.id_table = id_table_fake,
|
|
.num_ports = 1,
|
|
.attach = keyspan_pda_fake_startup,
|
|
};
|
|
#endif
|
|
|
|
#ifdef XIRCOM
|
|
static struct usb_serial_driver xircom_pgs_fake_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "xircom_no_firm",
|
|
},
|
|
.description = "Xircom / Entrega PGS - (prerenumeration)",
|
|
.id_table = id_table_fake_xircom,
|
|
.num_ports = 1,
|
|
.attach = keyspan_pda_fake_startup,
|
|
};
|
|
#endif
|
|
|
|
static struct usb_serial_driver keyspan_pda_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "keyspan_pda",
|
|
},
|
|
.description = "Keyspan PDA",
|
|
.id_table = id_table_std,
|
|
.num_ports = 1,
|
|
.dtr_rts = keyspan_pda_dtr_rts,
|
|
.open = keyspan_pda_open,
|
|
.close = keyspan_pda_close,
|
|
.write = keyspan_pda_write,
|
|
.write_room = keyspan_pda_write_room,
|
|
.write_bulk_callback = keyspan_pda_write_bulk_callback,
|
|
.read_int_callback = keyspan_pda_rx_interrupt,
|
|
.chars_in_buffer = keyspan_pda_chars_in_buffer,
|
|
.throttle = keyspan_pda_rx_throttle,
|
|
.unthrottle = keyspan_pda_rx_unthrottle,
|
|
.set_termios = keyspan_pda_set_termios,
|
|
.break_ctl = keyspan_pda_break_ctl,
|
|
.tiocmget = keyspan_pda_tiocmget,
|
|
.tiocmset = keyspan_pda_tiocmset,
|
|
.port_probe = keyspan_pda_port_probe,
|
|
.port_remove = keyspan_pda_port_remove,
|
|
};
|
|
|
|
static struct usb_serial_driver * const serial_drivers[] = {
|
|
&keyspan_pda_device,
|
|
#ifdef KEYSPAN
|
|
&keyspan_pda_fake_device,
|
|
#endif
|
|
#ifdef XIRCOM
|
|
&xircom_pgs_fake_device,
|
|
#endif
|
|
NULL
|
|
};
|
|
|
|
module_usb_serial_driver(serial_drivers, id_table_combined);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|