![Olivier Galibert](/assets/img/avatar_default.png)
On i945, a mmconfig range hitting the f0000000-ffffffff zone conflicts with the APIC registers and others. Consider it invalid. On E7520, values 0000 and f000 for the window register are defined invalid in the documentation. I haven't seen a bios use these values, but who trusts biosen these days? Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Andi Kleen <ak@suse.de> arch/i386/pci/mmconfig-shared.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
274 lines
6.9 KiB
C
274 lines
6.9 KiB
C
/*
|
|
* mmconfig-shared.c - Low-level direct PCI config space access via
|
|
* MMCONFIG - common code between i386 and x86-64.
|
|
*
|
|
* This code does:
|
|
* - known chipset handling
|
|
* - ACPI decoding and validation
|
|
*
|
|
* Per-architecture code takes care of the mappings and accesses
|
|
* themselves.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitmap.h>
|
|
#include <asm/e820.h>
|
|
|
|
#include "pci.h"
|
|
|
|
/* aperture is up to 256MB but BIOS may reserve less */
|
|
#define MMCONFIG_APER_MIN (2 * 1024*1024)
|
|
#define MMCONFIG_APER_MAX (256 * 1024*1024)
|
|
|
|
DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
|
|
|
|
/* K8 systems have some devices (typically in the builtin northbridge)
|
|
that are only accessible using type1
|
|
Normally this can be expressed in the MCFG by not listing them
|
|
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
|
|
Instead try to discover all devices on bus 0 that are unreachable using MM
|
|
and fallback for them. */
|
|
static void __init unreachable_devices(void)
|
|
{
|
|
int i, bus;
|
|
/* Use the max bus number from ACPI here? */
|
|
for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) {
|
|
for (i = 0; i < 32; i++) {
|
|
unsigned int devfn = PCI_DEVFN(i, 0);
|
|
u32 val1, val2;
|
|
|
|
pci_conf1_read(0, bus, devfn, 0, 4, &val1);
|
|
if (val1 == 0xffffffff)
|
|
continue;
|
|
|
|
if (pci_mmcfg_arch_reachable(0, bus, devfn)) {
|
|
raw_pci_ops->read(0, bus, devfn, 0, 4, &val2);
|
|
if (val1 == val2)
|
|
continue;
|
|
}
|
|
set_bit(i + 32 * bus, pci_mmcfg_fallback_slots);
|
|
printk(KERN_NOTICE "PCI: No mmconfig possible on device"
|
|
" %02x:%02x\n", bus, i);
|
|
}
|
|
}
|
|
}
|
|
|
|
static const char __init *pci_mmcfg_e7520(void)
|
|
{
|
|
u32 win;
|
|
pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
|
|
|
|
win = win & 0xf000;
|
|
if(win == 0x0000 || win == 0xf000)
|
|
pci_mmcfg_config_num = 0;
|
|
else {
|
|
pci_mmcfg_config_num = 1;
|
|
pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
|
|
if (!pci_mmcfg_config)
|
|
return NULL;
|
|
pci_mmcfg_config[0].address = win << 16;
|
|
pci_mmcfg_config[0].pci_segment = 0;
|
|
pci_mmcfg_config[0].start_bus_number = 0;
|
|
pci_mmcfg_config[0].end_bus_number = 255;
|
|
}
|
|
|
|
return "Intel Corporation E7520 Memory Controller Hub";
|
|
}
|
|
|
|
static const char __init *pci_mmcfg_intel_945(void)
|
|
{
|
|
u32 pciexbar, mask = 0, len = 0;
|
|
|
|
pci_mmcfg_config_num = 1;
|
|
|
|
pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
|
|
|
|
/* Enable bit */
|
|
if (!(pciexbar & 1))
|
|
pci_mmcfg_config_num = 0;
|
|
|
|
/* Size bits */
|
|
switch ((pciexbar >> 1) & 3) {
|
|
case 0:
|
|
mask = 0xf0000000U;
|
|
len = 0x10000000U;
|
|
break;
|
|
case 1:
|
|
mask = 0xf8000000U;
|
|
len = 0x08000000U;
|
|
break;
|
|
case 2:
|
|
mask = 0xfc000000U;
|
|
len = 0x04000000U;
|
|
break;
|
|
default:
|
|
pci_mmcfg_config_num = 0;
|
|
}
|
|
|
|
/* Errata #2, things break when not aligned on a 256Mb boundary */
|
|
/* Can only happen in 64M/128M mode */
|
|
|
|
if ((pciexbar & mask) & 0x0fffffffU)
|
|
pci_mmcfg_config_num = 0;
|
|
|
|
/* Don't hit the APIC registers and their friends */
|
|
if ((pciexbar & mask) >= 0xf0000000U)
|
|
pci_mmcfg_config_num = 0;
|
|
|
|
if (pci_mmcfg_config_num) {
|
|
pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
|
|
if (!pci_mmcfg_config)
|
|
return NULL;
|
|
pci_mmcfg_config[0].address = pciexbar & mask;
|
|
pci_mmcfg_config[0].pci_segment = 0;
|
|
pci_mmcfg_config[0].start_bus_number = 0;
|
|
pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
|
|
}
|
|
|
|
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
|
|
}
|
|
|
|
struct pci_mmcfg_hostbridge_probe {
|
|
u32 vendor;
|
|
u32 device;
|
|
const char *(*probe)(void);
|
|
};
|
|
|
|
static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
|
|
};
|
|
|
|
static int __init pci_mmcfg_check_hostbridge(void)
|
|
{
|
|
u32 l;
|
|
u16 vendor, device;
|
|
int i;
|
|
const char *name;
|
|
|
|
pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
|
|
vendor = l & 0xffff;
|
|
device = (l >> 16) & 0xffff;
|
|
|
|
pci_mmcfg_config_num = 0;
|
|
pci_mmcfg_config = NULL;
|
|
name = NULL;
|
|
|
|
for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
|
|
if (pci_mmcfg_probes[i].vendor == vendor &&
|
|
pci_mmcfg_probes[i].device == device)
|
|
name = pci_mmcfg_probes[i].probe();
|
|
}
|
|
|
|
if (name) {
|
|
printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n",
|
|
name, pci_mmcfg_config_num ? "with" : "without");
|
|
}
|
|
|
|
return name != NULL;
|
|
}
|
|
|
|
static void __init pci_mmcfg_insert_resources(void)
|
|
{
|
|
#define PCI_MMCFG_RESOURCE_NAME_LEN 19
|
|
int i;
|
|
struct resource *res;
|
|
char *names;
|
|
unsigned num_buses;
|
|
|
|
res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
|
|
pci_mmcfg_config_num, GFP_KERNEL);
|
|
if (!res) {
|
|
printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
|
|
return;
|
|
}
|
|
|
|
names = (void *)&res[pci_mmcfg_config_num];
|
|
for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
|
|
struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
|
|
num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
|
|
res->name = names;
|
|
snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
|
|
cfg->pci_segment);
|
|
res->start = cfg->address;
|
|
res->end = res->start + (num_buses << 20) - 1;
|
|
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
|
|
insert_resource(&iomem_resource, res);
|
|
names += PCI_MMCFG_RESOURCE_NAME_LEN;
|
|
}
|
|
}
|
|
|
|
static void __init pci_mmcfg_reject_broken(int type)
|
|
{
|
|
typeof(pci_mmcfg_config[0]) *cfg;
|
|
|
|
if ((pci_mmcfg_config_num == 0) ||
|
|
(pci_mmcfg_config == NULL) ||
|
|
(pci_mmcfg_config[0].address == 0))
|
|
return;
|
|
|
|
cfg = &pci_mmcfg_config[0];
|
|
|
|
/*
|
|
* Handle more broken MCFG tables on Asus etc.
|
|
* They only contain a single entry for bus 0-0.
|
|
*/
|
|
if (pci_mmcfg_config_num == 1 &&
|
|
cfg->pci_segment == 0 &&
|
|
(cfg->start_bus_number | cfg->end_bus_number) == 0) {
|
|
printk(KERN_ERR "PCI: start and end of bus number is 0. "
|
|
"Rejected as broken MCFG.\n");
|
|
goto reject;
|
|
}
|
|
|
|
/*
|
|
* Only do this check when type 1 works. If it doesn't work
|
|
* assume we run on a Mac and always use MCFG
|
|
*/
|
|
if (type == 1 && !e820_all_mapped(cfg->address,
|
|
cfg->address + MMCONFIG_APER_MIN,
|
|
E820_RESERVED)) {
|
|
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
|
|
" E820-reserved\n", cfg->address);
|
|
goto reject;
|
|
}
|
|
return;
|
|
|
|
reject:
|
|
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
|
|
kfree(pci_mmcfg_config);
|
|
pci_mmcfg_config = NULL;
|
|
pci_mmcfg_config_num = 0;
|
|
}
|
|
|
|
void __init pci_mmcfg_init(int type)
|
|
{
|
|
int known_bridge = 0;
|
|
|
|
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
|
|
return;
|
|
|
|
if (type == 1 && pci_mmcfg_check_hostbridge())
|
|
known_bridge = 1;
|
|
|
|
if (!known_bridge) {
|
|
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
|
|
pci_mmcfg_reject_broken(type);
|
|
}
|
|
|
|
if ((pci_mmcfg_config_num == 0) ||
|
|
(pci_mmcfg_config == NULL) ||
|
|
(pci_mmcfg_config[0].address == 0))
|
|
return;
|
|
|
|
if (pci_mmcfg_arch_init()) {
|
|
if (type == 1)
|
|
unreachable_devices();
|
|
if (known_bridge)
|
|
pci_mmcfg_insert_resources();
|
|
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
|
|
}
|
|
}
|