![Nicolas Ferre](/assets/img/avatar_default.png)
When using CP15 cache operations (c7), we make sure that Rd (r0) is actually 0 as ARM 926 TRM is saying. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
108 lines
3 KiB
C
108 lines
3 KiB
C
#ifdef CONFIG_ARCH_AT91RM9200
|
|
#include <mach/at91rm9200_mc.h>
|
|
|
|
/*
|
|
* The AT91RM9200 goes into self-refresh mode with this command, and will
|
|
* terminate self-refresh automatically on the next SDRAM access.
|
|
*
|
|
* Self-refresh mode is exited as soon as a memory access is made, but we don't
|
|
* know for sure when that happens. However, we need to restore the low-power
|
|
* mode if it was enabled before going idle. Restoring low-power mode while
|
|
* still in self-refresh is "not recommended", but seems to work.
|
|
*/
|
|
|
|
static inline u32 sdram_selfrefresh_enable(void)
|
|
{
|
|
u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
|
|
|
|
at91_sys_write(AT91_SDRAMC_LPR, 0);
|
|
at91_sys_write(AT91_SDRAMC_SRR, 1);
|
|
return saved_lpr;
|
|
}
|
|
|
|
#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
|
|
#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
|
|
: : "r" (0))
|
|
|
|
#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
#include <mach/at91cap9_ddrsdr.h>
|
|
|
|
|
|
static inline u32 sdram_selfrefresh_enable(void)
|
|
{
|
|
u32 saved_lpr, lpr;
|
|
|
|
saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
|
|
|
|
lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
|
|
return saved_lpr;
|
|
}
|
|
|
|
#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
|
|
#define wait_for_interrupt_enable() cpu_do_idle()
|
|
|
|
#elif defined(CONFIG_ARCH_AT91SAM9G45)
|
|
#include <mach/at91sam9_ddrsdr.h>
|
|
|
|
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
|
|
* remember.
|
|
*/
|
|
static u32 saved_lpr1;
|
|
|
|
static inline u32 sdram_selfrefresh_enable(void)
|
|
{
|
|
/* Those tow values allow us to delay self-refresh activation
|
|
* to the maximum. */
|
|
u32 lpr0, lpr1;
|
|
u32 saved_lpr0;
|
|
|
|
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
|
|
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
|
|
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
|
|
|
|
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
|
|
lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
|
|
lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
|
|
|
|
/* self-refresh mode now */
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
|
|
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
|
|
|
|
return saved_lpr0;
|
|
}
|
|
|
|
#define sdram_selfrefresh_disable(saved_lpr0) \
|
|
do { \
|
|
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
|
|
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
|
|
} while (0)
|
|
#define wait_for_interrupt_enable() cpu_do_idle()
|
|
|
|
#else
|
|
#include <mach/at91sam9_sdramc.h>
|
|
|
|
#ifdef CONFIG_ARCH_AT91SAM9263
|
|
/*
|
|
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
|
|
* handle those cases both here and in the Suspend-To-RAM support.
|
|
*/
|
|
#warning Assuming EB1 SDRAM controller is *NOT* used
|
|
#endif
|
|
|
|
static inline u32 sdram_selfrefresh_enable(void)
|
|
{
|
|
u32 saved_lpr, lpr;
|
|
|
|
saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
|
|
|
|
lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
|
|
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
|
|
return saved_lpr;
|
|
}
|
|
|
|
#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
|
|
#define wait_for_interrupt_enable() cpu_do_idle()
|
|
|
|
#endif
|