redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/gpu/drm/meson/meson_plane.c
Neil Armstrong 3a936bc286 drm/meson: Fix an Alpha Primary Plane bug on Meson GXL/GXM SoCs 
On the Amlogic GXL & GXM SoCs, a bug occurs on the primary plane when
alpha is used where the alpha is not aligned with the pixel content.

The workaround Amlogic implemented is to reset the OSD1 plane hardware
block each time the plane is (re)enabled, solving the issue.

In the reset, we still need to save the content of 2 registers which
depends on the status of the plane, in addition to reload the scaler
conversion matrix at the same time.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fixed typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20181128100734.6536-1-narmstrong@baylibre.com
2018-12-03 11:12:09 +01:00

383 lines
11 KiB
C
Raw Blame History

/*
* Copyright (C) 2016 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
* Copyright (C) 2014 Endless Mobile
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Written by:
* Jasper St. Pierre <jstpierre@mecheye.net>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/bitfield.h>
#include <linux/platform_device.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_rect.h>
#include "meson_plane.h"
#include "meson_vpp.h"
#include "meson_viu.h"
#include "meson_canvas.h"
#include "meson_registers.h"
/* OSD_SCI_WH_M1 */
#define SCI_WH_M1_W(w) FIELD_PREP(GENMASK(28, 16), w)
#define SCI_WH_M1_H(h) FIELD_PREP(GENMASK(12, 0), h)
/* OSD_SCO_H_START_END */
/* OSD_SCO_V_START_END */
#define SCO_HV_START(start) FIELD_PREP(GENMASK(27, 16), start)
#define SCO_HV_END(end) FIELD_PREP(GENMASK(11, 0), end)
/* OSD_SC_CTRL0 */
#define SC_CTRL0_PATH_EN BIT(3)
#define SC_CTRL0_SEL_OSD1 BIT(2)
/* OSD_VSC_CTRL0 */
#define VSC_BANK_LEN(value) FIELD_PREP(GENMASK(2, 0), value)
#define VSC_TOP_INI_RCV_NUM(value) FIELD_PREP(GENMASK(6, 3), value)
#define VSC_TOP_RPT_L0_NUM(value) FIELD_PREP(GENMASK(9, 8), value)
#define VSC_BOT_INI_RCV_NUM(value) FIELD_PREP(GENMASK(14, 11), value)
#define VSC_BOT_RPT_L0_NUM(value) FIELD_PREP(GENMASK(17, 16), value)
#define VSC_PROG_INTERLACE BIT(23)
#define VSC_VERTICAL_SCALER_EN BIT(24)
/* OSD_VSC_INI_PHASE */
#define VSC_INI_PHASE_BOT(bottom) FIELD_PREP(GENMASK(31, 16), bottom)
#define VSC_INI_PHASE_TOP(top) FIELD_PREP(GENMASK(15, 0), top)
/* OSD_HSC_CTRL0 */
#define HSC_BANK_LENGTH(value) FIELD_PREP(GENMASK(2, 0), value)
#define HSC_INI_RCV_NUM0(value) FIELD_PREP(GENMASK(6, 3), value)
#define HSC_RPT_P0_NUM0(value) FIELD_PREP(GENMASK(9, 8), value)
#define HSC_HORIZ_SCALER_EN BIT(22)
/* VPP_OSD_VSC_PHASE_STEP */
/* VPP_OSD_HSC_PHASE_STEP */
#define SC_PHASE_STEP(value) FIELD_PREP(GENMASK(27, 0), value)
struct meson_plane {
struct drm_plane base;
struct meson_drm *priv;
bool enabled;
};
#define to_meson_plane(x) container_of(x, struct meson_plane, base)
#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
static int meson_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct drm_crtc_state *crtc_state;
if (!state->crtc)
return 0;
crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
/*
* Only allow :
* - Upscaling up to 5x, vertical and horizontal
* - Final coordinates must match crtc size
*/
return drm_atomic_helper_check_plane_state(state, crtc_state,
FRAC_16_16(1, 5),
DRM_PLANE_HELPER_NO_SCALING,
false, true);
}
/* Takes a fixed 16.16 number and converts it to integer. */
static inline int64_t fixed16_to_int(int64_t value)
{
return value >> 16;
}
static void meson_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct meson_plane *meson_plane = to_meson_plane(plane);
struct drm_plane_state *state = plane->state;
struct drm_rect dest = drm_plane_state_dest(state);
struct meson_drm *priv = meson_plane->priv;
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *gem;
unsigned long flags;
int vsc_ini_rcv_num, vsc_ini_rpt_p0_num;
int vsc_bot_rcv_num, vsc_bot_rpt_p0_num;
int hsc_ini_rcv_num, hsc_ini_rpt_p0_num;
int hf_phase_step, vf_phase_step;
int src_w, src_h, dst_w, dst_h;
int bot_ini_phase;
int hf_bank_len;
int vf_bank_len;
u8 canvas_id_osd1;
/*
* Update Coordinates
* Update Formats
* Update Buffer
* Enable Plane
*/
spin_lock_irqsave(&priv->drm->event_lock, flags);
/* Enable OSD and BLK0, set max global alpha */
priv->viu.osd1_ctrl_stat = OSD_ENABLE |
(0xFF << OSD_GLOBAL_ALPHA_SHIFT) |
OSD_BLK0_ENABLE;
if (priv->canvas)
canvas_id_osd1 = priv->canvas_id_osd1;
else
canvas_id_osd1 = MESON_CANVAS_ID_OSD1;
/* Set up BLK0 to point to the right canvas */
priv->viu.osd1_blk0_cfg[0] = ((canvas_id_osd1 << OSD_CANVAS_SEL) |
OSD_ENDIANNESS_LE);
/* On GXBB, Use the old non-HDR RGB2YUV converter */
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
priv->viu.osd1_blk0_cfg[0] |= OSD_OUTPUT_COLOR_RGB;
switch (fb->format->format) {
case DRM_FORMAT_XRGB8888:
/* For XRGB, replace the pixel's alpha by 0xFF */
writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ARGB;
break;
case DRM_FORMAT_ARGB8888:
/* For ARGB, use the pixel's alpha */
writel_bits_relaxed(OSD_REPLACE_EN, 0,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ARGB;
break;
case DRM_FORMAT_RGB888:
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
OSD_COLOR_MATRIX_24_RGB;
break;
case DRM_FORMAT_RGB565:
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
OSD_COLOR_MATRIX_16_RGB565;
break;
};
/* Default scaler parameters */
vsc_bot_rcv_num = 0;
vsc_bot_rpt_p0_num = 0;
hf_bank_len = 4;
vf_bank_len = 4;
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
vsc_bot_rcv_num = 6;
vsc_bot_rpt_p0_num = 2;
}
hsc_ini_rcv_num = hf_bank_len;
vsc_ini_rcv_num = vf_bank_len;
hsc_ini_rpt_p0_num = (hf_bank_len / 2) - 1;
vsc_ini_rpt_p0_num = (vf_bank_len / 2) - 1;
src_w = fixed16_to_int(state->src_w);
src_h = fixed16_to_int(state->src_h);
dst_w = state->crtc_w;
dst_h = state->crtc_h;
/*
* When the output is interlaced, the OSD must switch between
* each field using the INTERLACE_SEL_ODD (0) of VIU_OSD1_BLK0_CFG_W0
* at each vsync.
* But the vertical scaler can provide such funtionnality if
* is configured for 2:1 scaling with interlace options enabled.
*/
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
dest.y1 /= 2;
dest.y2 /= 2;
dst_h /= 2;
}
hf_phase_step = ((src_w << 18) / dst_w) << 6;
vf_phase_step = (src_h << 20) / dst_h;
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE)
bot_ini_phase = ((vf_phase_step / 2) >> 4);
else
bot_ini_phase = 0;
vf_phase_step = (vf_phase_step << 4);
/* In interlaced mode, scaler is always active */
if (src_h != dst_h || src_w != dst_w) {
priv->viu.osd_sc_i_wh_m1 = SCI_WH_M1_W(src_w - 1) |
SCI_WH_M1_H(src_h - 1);
priv->viu.osd_sc_o_h_start_end = SCO_HV_START(dest.x1) |
SCO_HV_END(dest.x2 - 1);
priv->viu.osd_sc_o_v_start_end = SCO_HV_START(dest.y1) |
SCO_HV_END(dest.y2 - 1);
/* Enable OSD Scaler */
priv->viu.osd_sc_ctrl0 = SC_CTRL0_PATH_EN | SC_CTRL0_SEL_OSD1;
} else {
priv->viu.osd_sc_i_wh_m1 = 0;
priv->viu.osd_sc_o_h_start_end = 0;
priv->viu.osd_sc_o_v_start_end = 0;
priv->viu.osd_sc_ctrl0 = 0;
}
/* In interlaced mode, vertical scaler is always active */
if (src_h != dst_h) {
priv->viu.osd_sc_v_ctrl0 =
VSC_BANK_LEN(vf_bank_len) |
VSC_TOP_INI_RCV_NUM(vsc_ini_rcv_num) |
VSC_TOP_RPT_L0_NUM(vsc_ini_rpt_p0_num) |
VSC_VERTICAL_SCALER_EN;
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE)
priv->viu.osd_sc_v_ctrl0 |=
VSC_BOT_INI_RCV_NUM(vsc_bot_rcv_num) |
VSC_BOT_RPT_L0_NUM(vsc_bot_rpt_p0_num) |
VSC_PROG_INTERLACE;
priv->viu.osd_sc_v_phase_step = SC_PHASE_STEP(vf_phase_step);
priv->viu.osd_sc_v_ini_phase = VSC_INI_PHASE_BOT(bot_ini_phase);
} else {
priv->viu.osd_sc_v_ctrl0 = 0;
priv->viu.osd_sc_v_phase_step = 0;
priv->viu.osd_sc_v_ini_phase = 0;
}
/* Horizontal scaler is only used if width does not match */
if (src_w != dst_w) {
priv->viu.osd_sc_h_ctrl0 =
HSC_BANK_LENGTH(hf_bank_len) |
HSC_INI_RCV_NUM0(hsc_ini_rcv_num) |
HSC_RPT_P0_NUM0(hsc_ini_rpt_p0_num) |
HSC_HORIZ_SCALER_EN;
priv->viu.osd_sc_h_phase_step = SC_PHASE_STEP(hf_phase_step);
priv->viu.osd_sc_h_ini_phase = 0;
} else {
priv->viu.osd_sc_h_ctrl0 = 0;
priv->viu.osd_sc_h_phase_step = 0;
priv->viu.osd_sc_h_ini_phase = 0;
}
/*
* The format of these registers is (x2 << 16 | x1),
* where x2 is exclusive.
* e.g. +30x1920 would be (1919 << 16) | 30
*/
priv->viu.osd1_blk0_cfg[1] =
((fixed16_to_int(state->src.x2) - 1) << 16) |
fixed16_to_int(state->src.x1);
priv->viu.osd1_blk0_cfg[2] =
((fixed16_to_int(state->src.y2) - 1) << 16) |
fixed16_to_int(state->src.y1);
priv->viu.osd1_blk0_cfg[3] = ((dest.x2 - 1) << 16) | dest.x1;
priv->viu.osd1_blk0_cfg[4] = ((dest.y2 - 1) << 16) | dest.y1;
/* Update Canvas with buffer address */
gem = drm_fb_cma_get_gem_obj(fb, 0);
priv->viu.osd1_addr = gem->paddr;
priv->viu.osd1_stride = fb->pitches[0];
priv->viu.osd1_height = fb->height;
if (!meson_plane->enabled) {
/* Reset OSD1 before enabling it on GXL+ SoCs */
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
meson_viu_osd1_reset(priv);
meson_plane->enabled = true;
}
spin_unlock_irqrestore(&priv->drm->event_lock, flags);
}
static void meson_plane_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct meson_plane *meson_plane = to_meson_plane(plane);
struct meson_drm *priv = meson_plane->priv;
/* Disable OSD1 */
writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
priv->io_base + _REG(VPP_MISC));
meson_plane->enabled = false;
}
static const struct drm_plane_helper_funcs meson_plane_helper_funcs = {
.atomic_check = meson_plane_atomic_check,
.atomic_disable = meson_plane_atomic_disable,
.atomic_update = meson_plane_atomic_update,
.prepare_fb = drm_gem_fb_prepare_fb,
};
static const struct drm_plane_funcs meson_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = drm_plane_cleanup,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
static const uint32_t supported_drm_formats[] = {
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_RGB888,
DRM_FORMAT_RGB565,
};
int meson_plane_create(struct meson_drm *priv)
{
struct meson_plane *meson_plane;
struct drm_plane *plane;
meson_plane = devm_kzalloc(priv->drm->dev, sizeof(*meson_plane),
GFP_KERNEL);
if (!meson_plane)
return -ENOMEM;
meson_plane->priv = priv;
plane = &meson_plane->base;
drm_universal_plane_init(priv->drm, plane, 0xFF,
&meson_plane_funcs,
supported_drm_formats,
ARRAY_SIZE(supported_drm_formats),
NULL,
DRM_PLANE_TYPE_PRIMARY, "meson_primary_plane");
drm_plane_helper_add(plane, &meson_plane_helper_funcs);
priv->primary_plane = plane;
return 0;
}
View git blame Copy permalink