![Hans de Goede](/assets/img/avatar_default.png)
Add an iio driver for the MiraMEMS DA280 3-axis 14-bit accelerometer, as well as for the DA226 which is a fully compatible 2-axis version. Datasheets for the DA280 and DA226 can be found at the manufacturers site: http://www.miramems.com/en/products.asp?list=1 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
184 lines
4.2 KiB
C
184 lines
4.2 KiB
C
/**
|
|
* IIO driver for the MiraMEMS DA280 3-axis accelerometer and
|
|
* IIO driver for the MiraMEMS DA226 2-axis accelerometer
|
|
*
|
|
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/byteorder/generic.h>
|
|
|
|
#define DA280_REG_CHIP_ID 0x01
|
|
#define DA280_REG_ACC_X_LSB 0x02
|
|
#define DA280_REG_ACC_Y_LSB 0x04
|
|
#define DA280_REG_ACC_Z_LSB 0x06
|
|
#define DA280_REG_MODE_BW 0x11
|
|
|
|
#define DA280_CHIP_ID 0x13
|
|
#define DA280_MODE_ENABLE 0x1e
|
|
#define DA280_MODE_DISABLE 0x9e
|
|
|
|
enum { da226, da280 };
|
|
|
|
/*
|
|
* a value of + or -4096 corresponds to + or - 1G
|
|
* scale = 9.81 / 4096 = 0.002395019
|
|
*/
|
|
|
|
static const int da280_nscale = 2395019;
|
|
|
|
#define DA280_CHANNEL(reg, axis) { \
|
|
.type = IIO_ACCEL, \
|
|
.address = reg, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
}
|
|
|
|
static const struct iio_chan_spec da280_channels[] = {
|
|
DA280_CHANNEL(DA280_REG_ACC_X_LSB, X),
|
|
DA280_CHANNEL(DA280_REG_ACC_Y_LSB, Y),
|
|
DA280_CHANNEL(DA280_REG_ACC_Z_LSB, Z),
|
|
};
|
|
|
|
struct da280_data {
|
|
struct i2c_client *client;
|
|
};
|
|
|
|
static int da280_enable(struct i2c_client *client, bool enable)
|
|
{
|
|
u8 data = enable ? DA280_MODE_ENABLE : DA280_MODE_DISABLE;
|
|
|
|
return i2c_smbus_write_byte_data(client, DA280_REG_MODE_BW, data);
|
|
}
|
|
|
|
static int da280_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct da280_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = i2c_smbus_read_word_data(data->client, chan->address);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* Values are 14 bits, stored as 16 bits with the 2
|
|
* least significant bits always 0.
|
|
*/
|
|
*val = (short)ret >> 2;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = da280_nscale;
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info da280_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = da280_read_raw,
|
|
};
|
|
|
|
static int da280_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct iio_dev *indio_dev;
|
|
struct da280_data *data;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, DA280_REG_CHIP_ID);
|
|
if (ret != DA280_CHIP_ID)
|
|
return (ret < 0) ? ret : -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->info = &da280_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = da280_channels;
|
|
if (id->driver_data == da226) {
|
|
indio_dev->name = "da226";
|
|
indio_dev->num_channels = 2;
|
|
} else {
|
|
indio_dev->name = "da280";
|
|
indio_dev->num_channels = 3;
|
|
}
|
|
|
|
ret = da280_enable(client, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "device_register failed\n");
|
|
da280_enable(client, false);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int da280_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
return da280_enable(client, false);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int da280_suspend(struct device *dev)
|
|
{
|
|
return da280_enable(to_i2c_client(dev), false);
|
|
}
|
|
|
|
static int da280_resume(struct device *dev)
|
|
{
|
|
return da280_enable(to_i2c_client(dev), true);
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(da280_pm_ops, da280_suspend, da280_resume);
|
|
|
|
static const struct i2c_device_id da280_i2c_id[] = {
|
|
{ "da226", da226 },
|
|
{ "da280", da280 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, da280_i2c_id);
|
|
|
|
static struct i2c_driver da280_driver = {
|
|
.driver = {
|
|
.name = "da280",
|
|
.pm = &da280_pm_ops,
|
|
},
|
|
.probe = da280_probe,
|
|
.remove = da280_remove,
|
|
.id_table = da280_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(da280_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("MiraMEMS DA280 3-Axis Accelerometer driver");
|
|
MODULE_LICENSE("GPL v2");
|