![Jasmin J](/assets/img/avatar_default.png)
It started with a sporadic message in syslog: "CAM tried to send a buffer larger than the ecount size" This message is not the fault itself, but a consecutive fault, after a read error from the CAM. This happens only on several CAMs, several hardware, and of course sporadic. It is a consecutive fault, if the last read from the CAM did fail. I guess this will not happen on all CAMs, but at least it did on mine. There was a write error to the CAM and during the re-initialization procedure, the CAM finished the last read, although it got a RS. The write error to the CAM happened because a race condition between HC write, checking DA and FR. This patch added an additional check for DA(RE), just after checking FR. It is important to read the CAMs status register again, to give the CAM the necessary time for a proper reaction to HC. Please note the description within the source code (patch below). [mchehab@s-opensource.com: make checkpatch happy] Signed-off-by: Jasmin jessich <jasmin@anw.at> Tested-by: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
1834 lines
47 KiB
C
1834 lines
47 KiB
C
/*
|
|
* dvb_ca.c: generic DVB functions for EN50221 CAM interfaces
|
|
*
|
|
* Copyright (C) 2004 Andrew de Quincey
|
|
*
|
|
* Parts of this file were based on sources as follows:
|
|
*
|
|
* Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de>
|
|
*
|
|
* based on code:
|
|
*
|
|
* Copyright (C) 1999-2002 Ralph Metzler
|
|
* & Marcus Metzler for convergence integrated media GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
* To obtain the license, point your browser to
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "dvb_ca_en50221: " fmt
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sched/signal.h>
|
|
#include <linux/kthread.h>
|
|
|
|
#include "dvb_ca_en50221.h"
|
|
#include "dvb_ringbuffer.h"
|
|
|
|
static int dvb_ca_en50221_debug;
|
|
|
|
module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644);
|
|
MODULE_PARM_DESC(cam_debug, "enable verbose debug messages");
|
|
|
|
#define dprintk(fmt, arg...) do { \
|
|
if (dvb_ca_en50221_debug) \
|
|
printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\
|
|
} while (0)
|
|
|
|
#define INIT_TIMEOUT_SECS 10
|
|
|
|
#define HOST_LINK_BUF_SIZE 0x200
|
|
|
|
#define RX_BUFFER_SIZE 65535
|
|
|
|
#define MAX_RX_PACKETS_PER_ITERATION 10
|
|
|
|
#define CTRLIF_DATA 0
|
|
#define CTRLIF_COMMAND 1
|
|
#define CTRLIF_STATUS 1
|
|
#define CTRLIF_SIZE_LOW 2
|
|
#define CTRLIF_SIZE_HIGH 3
|
|
|
|
#define CMDREG_HC 1 /* Host control */
|
|
#define CMDREG_SW 2 /* Size write */
|
|
#define CMDREG_SR 4 /* Size read */
|
|
#define CMDREG_RS 8 /* Reset interface */
|
|
#define CMDREG_FRIE 0x40 /* Enable FR interrupt */
|
|
#define CMDREG_DAIE 0x80 /* Enable DA interrupt */
|
|
#define IRQEN (CMDREG_DAIE)
|
|
|
|
#define STATUSREG_RE 1 /* read error */
|
|
#define STATUSREG_WE 2 /* write error */
|
|
#define STATUSREG_FR 0x40 /* module free */
|
|
#define STATUSREG_DA 0x80 /* data available */
|
|
#define STATUSREG_TXERR (STATUSREG_RE|STATUSREG_WE) /* general transfer error */
|
|
|
|
|
|
#define DVB_CA_SLOTSTATE_NONE 0
|
|
#define DVB_CA_SLOTSTATE_UNINITIALISED 1
|
|
#define DVB_CA_SLOTSTATE_RUNNING 2
|
|
#define DVB_CA_SLOTSTATE_INVALID 3
|
|
#define DVB_CA_SLOTSTATE_WAITREADY 4
|
|
#define DVB_CA_SLOTSTATE_VALIDATE 5
|
|
#define DVB_CA_SLOTSTATE_WAITFR 6
|
|
#define DVB_CA_SLOTSTATE_LINKINIT 7
|
|
|
|
|
|
/* Information on a CA slot */
|
|
struct dvb_ca_slot {
|
|
|
|
/* current state of the CAM */
|
|
int slot_state;
|
|
|
|
/* mutex used for serializing access to one CI slot */
|
|
struct mutex slot_lock;
|
|
|
|
/* Number of CAMCHANGES that have occurred since last processing */
|
|
atomic_t camchange_count;
|
|
|
|
/* Type of last CAMCHANGE */
|
|
int camchange_type;
|
|
|
|
/* base address of CAM config */
|
|
u32 config_base;
|
|
|
|
/* value to write into Config Control register */
|
|
u8 config_option;
|
|
|
|
/* if 1, the CAM supports DA IRQs */
|
|
u8 da_irq_supported:1;
|
|
|
|
/* size of the buffer to use when talking to the CAM */
|
|
int link_buf_size;
|
|
|
|
/* buffer for incoming packets */
|
|
struct dvb_ringbuffer rx_buffer;
|
|
|
|
/* timer used during various states of the slot */
|
|
unsigned long timeout;
|
|
};
|
|
|
|
/* Private CA-interface information */
|
|
struct dvb_ca_private {
|
|
struct kref refcount;
|
|
|
|
/* pointer back to the public data structure */
|
|
struct dvb_ca_en50221 *pub;
|
|
|
|
/* the DVB device */
|
|
struct dvb_device *dvbdev;
|
|
|
|
/* Flags describing the interface (DVB_CA_FLAG_*) */
|
|
u32 flags;
|
|
|
|
/* number of slots supported by this CA interface */
|
|
unsigned int slot_count;
|
|
|
|
/* information on each slot */
|
|
struct dvb_ca_slot *slot_info;
|
|
|
|
/* wait queues for read() and write() operations */
|
|
wait_queue_head_t wait_queue;
|
|
|
|
/* PID of the monitoring thread */
|
|
struct task_struct *thread;
|
|
|
|
/* Flag indicating if the CA device is open */
|
|
unsigned int open:1;
|
|
|
|
/* Flag indicating the thread should wake up now */
|
|
unsigned int wakeup:1;
|
|
|
|
/* Delay the main thread should use */
|
|
unsigned long delay;
|
|
|
|
/* Slot to start looking for data to read from in the next user-space read operation */
|
|
int next_read_slot;
|
|
|
|
/* mutex serializing ioctls */
|
|
struct mutex ioctl_mutex;
|
|
};
|
|
|
|
static void dvb_ca_private_free(struct dvb_ca_private *ca)
|
|
{
|
|
unsigned int i;
|
|
|
|
dvb_free_device(ca->dvbdev);
|
|
for (i = 0; i < ca->slot_count; i++)
|
|
vfree(ca->slot_info[i].rx_buffer.data);
|
|
|
|
kfree(ca->slot_info);
|
|
kfree(ca);
|
|
}
|
|
|
|
static void dvb_ca_private_release(struct kref *ref)
|
|
{
|
|
struct dvb_ca_private *ca = container_of(ref, struct dvb_ca_private, refcount);
|
|
dvb_ca_private_free(ca);
|
|
}
|
|
|
|
static void dvb_ca_private_get(struct dvb_ca_private *ca)
|
|
{
|
|
kref_get(&ca->refcount);
|
|
}
|
|
|
|
static void dvb_ca_private_put(struct dvb_ca_private *ca)
|
|
{
|
|
kref_put(&ca->refcount, dvb_ca_private_release);
|
|
}
|
|
|
|
static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca);
|
|
static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
|
|
static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount);
|
|
|
|
|
|
/**
|
|
* Safely find needle in haystack.
|
|
*
|
|
* @haystack: Buffer to look in.
|
|
* @hlen: Number of bytes in haystack.
|
|
* @needle: Buffer to find.
|
|
* @nlen: Number of bytes in needle.
|
|
* @return Pointer into haystack needle was found at, or NULL if not found.
|
|
*/
|
|
static char *findstr(char * haystack, int hlen, char * needle, int nlen)
|
|
{
|
|
int i;
|
|
|
|
if (hlen < nlen)
|
|
return NULL;
|
|
|
|
for (i = 0; i <= hlen - nlen; i++) {
|
|
if (!strncmp(haystack + i, needle, nlen))
|
|
return haystack + i;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
|
|
|
|
/* ******************************************************************************** */
|
|
/* EN50221 physical interface functions */
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_check_camstatus - Check CAM status.
|
|
*/
|
|
static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot)
|
|
{
|
|
int slot_status;
|
|
int cam_present_now;
|
|
int cam_changed;
|
|
|
|
/* IRQ mode */
|
|
if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) {
|
|
return (atomic_read(&ca->slot_info[slot].camchange_count) != 0);
|
|
}
|
|
|
|
/* poll mode */
|
|
slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open);
|
|
|
|
cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0;
|
|
cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0;
|
|
if (!cam_changed) {
|
|
int cam_present_old = (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE);
|
|
cam_changed = (cam_present_now != cam_present_old);
|
|
}
|
|
|
|
if (cam_changed) {
|
|
if (!cam_present_now) {
|
|
ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
|
|
} else {
|
|
ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED;
|
|
}
|
|
atomic_set(&ca->slot_info[slot].camchange_count, 1);
|
|
} else {
|
|
if ((ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) &&
|
|
(slot_status & DVB_CA_EN50221_POLL_CAM_READY)) {
|
|
// move to validate state if reset is completed
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE;
|
|
}
|
|
}
|
|
|
|
return cam_changed;
|
|
}
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_wait_if_status - Wait for flags to become set on the STATUS
|
|
* register on a CAM interface, checking for errors and timeout.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot on interface.
|
|
* @waitfor: Flags to wait for.
|
|
* @timeout_ms: Timeout in milliseconds.
|
|
*
|
|
* @return 0 on success, nonzero on error.
|
|
*/
|
|
static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot,
|
|
u8 waitfor, int timeout_hz)
|
|
{
|
|
unsigned long timeout;
|
|
unsigned long start;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* loop until timeout elapsed */
|
|
start = jiffies;
|
|
timeout = jiffies + timeout_hz;
|
|
while (1) {
|
|
/* read the status and check for error */
|
|
int res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
|
|
if (res < 0)
|
|
return -EIO;
|
|
|
|
/* if we got the flags, it was successful! */
|
|
if (res & waitfor) {
|
|
dprintk("%s succeeded timeout:%lu\n",
|
|
__func__, jiffies - start);
|
|
return 0;
|
|
}
|
|
|
|
/* check for timeout */
|
|
if (time_after(jiffies, timeout)) {
|
|
break;
|
|
}
|
|
|
|
/* wait for a bit */
|
|
msleep(1);
|
|
}
|
|
|
|
dprintk("%s failed timeout:%lu\n", __func__, jiffies - start);
|
|
|
|
/* if we get here, we've timed out */
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_link_init - Initialise the link layer connection to a CAM.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot id.
|
|
*
|
|
* @return 0 on success, nonzero on failure.
|
|
*/
|
|
static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
|
|
{
|
|
int ret;
|
|
int buf_size;
|
|
u8 buf[2];
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* we'll be determining these during this function */
|
|
ca->slot_info[slot].da_irq_supported = 0;
|
|
|
|
/* set the host link buffer size temporarily. it will be overwritten with the
|
|
* real negotiated size later. */
|
|
ca->slot_info[slot].link_buf_size = 2;
|
|
|
|
/* read the buffer size from the CAM */
|
|
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0)
|
|
return ret;
|
|
if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0)
|
|
return ret;
|
|
if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2)
|
|
return -EIO;
|
|
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0)
|
|
return ret;
|
|
|
|
/* store it, and choose the minimum of our buffer and the CAM's buffer size */
|
|
buf_size = (buf[0] << 8) | buf[1];
|
|
if (buf_size > HOST_LINK_BUF_SIZE)
|
|
buf_size = HOST_LINK_BUF_SIZE;
|
|
ca->slot_info[slot].link_buf_size = buf_size;
|
|
buf[0] = buf_size >> 8;
|
|
buf[1] = buf_size & 0xff;
|
|
dprintk("Chosen link buffer size of %i\n", buf_size);
|
|
|
|
/* write the buffer size to the CAM */
|
|
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0)
|
|
return ret;
|
|
if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10)) != 0)
|
|
return ret;
|
|
if ((ret = dvb_ca_en50221_write_data(ca, slot, buf, 2)) != 2)
|
|
return -EIO;
|
|
if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0)
|
|
return ret;
|
|
|
|
/* success */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* dvb_ca_en50221_read_tuple - Read a tuple from attribute memory.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot id.
|
|
* @address: Address to read from. Updated.
|
|
* @tupleType: Tuple id byte. Updated.
|
|
* @tupleLength: Tuple length. Updated.
|
|
* @tuple: Dest buffer for tuple (must be 256 bytes). Updated.
|
|
*
|
|
* @return 0 on success, nonzero on error.
|
|
*/
|
|
static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot,
|
|
int *address, int *tupleType, int *tupleLength, u8 * tuple)
|
|
{
|
|
int i;
|
|
int _tupleType;
|
|
int _tupleLength;
|
|
int _address = *address;
|
|
|
|
/* grab the next tuple length and type */
|
|
if ((_tupleType = ca->pub->read_attribute_mem(ca->pub, slot, _address)) < 0)
|
|
return _tupleType;
|
|
if (_tupleType == 0xff) {
|
|
dprintk("END OF CHAIN TUPLE type:0x%x\n", _tupleType);
|
|
*address += 2;
|
|
*tupleType = _tupleType;
|
|
*tupleLength = 0;
|
|
return 0;
|
|
}
|
|
if ((_tupleLength = ca->pub->read_attribute_mem(ca->pub, slot, _address + 2)) < 0)
|
|
return _tupleLength;
|
|
_address += 4;
|
|
|
|
dprintk("TUPLE type:0x%x length:%i\n", _tupleType, _tupleLength);
|
|
|
|
/* read in the whole tuple */
|
|
for (i = 0; i < _tupleLength; i++) {
|
|
tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, _address + (i * 2));
|
|
dprintk(" 0x%02x: 0x%02x %c\n",
|
|
i, tuple[i] & 0xff,
|
|
((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.');
|
|
}
|
|
_address += (_tupleLength * 2);
|
|
|
|
// success
|
|
*tupleType = _tupleType;
|
|
*tupleLength = _tupleLength;
|
|
*address = _address;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_parse_attributes - Parse attribute memory of a CAM module,
|
|
* extracting Config register, and checking it is a DVB CAM module.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot id.
|
|
*
|
|
* @return 0 on success, <0 on failure.
|
|
*/
|
|
static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot)
|
|
{
|
|
int address = 0;
|
|
int tupleLength;
|
|
int tupleType;
|
|
u8 tuple[257];
|
|
char *dvb_str;
|
|
int rasz;
|
|
int status;
|
|
int got_cftableentry = 0;
|
|
int end_chain = 0;
|
|
int i;
|
|
u16 manfid = 0;
|
|
u16 devid = 0;
|
|
|
|
|
|
// CISTPL_DEVICE_0A
|
|
if ((status =
|
|
dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
|
|
return status;
|
|
if (tupleType != 0x1D)
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
// CISTPL_DEVICE_0C
|
|
if ((status =
|
|
dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
|
|
return status;
|
|
if (tupleType != 0x1C)
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
// CISTPL_VERS_1
|
|
if ((status =
|
|
dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0)
|
|
return status;
|
|
if (tupleType != 0x15)
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
// CISTPL_MANFID
|
|
if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
|
|
&tupleLength, tuple)) < 0)
|
|
return status;
|
|
if (tupleType != 0x20)
|
|
return -EINVAL;
|
|
if (tupleLength != 4)
|
|
return -EINVAL;
|
|
manfid = (tuple[1] << 8) | tuple[0];
|
|
devid = (tuple[3] << 8) | tuple[2];
|
|
|
|
|
|
|
|
// CISTPL_CONFIG
|
|
if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
|
|
&tupleLength, tuple)) < 0)
|
|
return status;
|
|
if (tupleType != 0x1A)
|
|
return -EINVAL;
|
|
if (tupleLength < 3)
|
|
return -EINVAL;
|
|
|
|
/* extract the configbase */
|
|
rasz = tuple[0] & 3;
|
|
if (tupleLength < (3 + rasz + 14))
|
|
return -EINVAL;
|
|
ca->slot_info[slot].config_base = 0;
|
|
for (i = 0; i < rasz + 1; i++) {
|
|
ca->slot_info[slot].config_base |= (tuple[2 + i] << (8 * i));
|
|
}
|
|
|
|
/* check it contains the correct DVB string */
|
|
dvb_str = findstr((char *)tuple, tupleLength, "DVB_CI_V", 8);
|
|
if (dvb_str == NULL)
|
|
return -EINVAL;
|
|
if (tupleLength < ((dvb_str - (char *) tuple) + 12))
|
|
return -EINVAL;
|
|
|
|
/* is it a version we support? */
|
|
if (strncmp(dvb_str + 8, "1.00", 4)) {
|
|
pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n",
|
|
ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9],
|
|
dvb_str[10], dvb_str[11]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* process the CFTABLE_ENTRY tuples, and any after those */
|
|
while ((!end_chain) && (address < 0x1000)) {
|
|
if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType,
|
|
&tupleLength, tuple)) < 0)
|
|
return status;
|
|
switch (tupleType) {
|
|
case 0x1B: // CISTPL_CFTABLE_ENTRY
|
|
if (tupleLength < (2 + 11 + 17))
|
|
break;
|
|
|
|
/* if we've already parsed one, just use it */
|
|
if (got_cftableentry)
|
|
break;
|
|
|
|
/* get the config option */
|
|
ca->slot_info[slot].config_option = tuple[0] & 0x3f;
|
|
|
|
/* OK, check it contains the correct strings */
|
|
if ((findstr((char *)tuple, tupleLength, "DVB_HOST", 8) == NULL) ||
|
|
(findstr((char *)tuple, tupleLength, "DVB_CI_MODULE", 13) == NULL))
|
|
break;
|
|
|
|
got_cftableentry = 1;
|
|
break;
|
|
|
|
case 0x14: // CISTPL_NO_LINK
|
|
break;
|
|
|
|
case 0xFF: // CISTPL_END
|
|
end_chain = 1;
|
|
break;
|
|
|
|
default: /* Unknown tuple type - just skip this tuple and move to the next one */
|
|
dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n",
|
|
tupleType, tupleLength);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((address > 0x1000) || (!got_cftableentry))
|
|
return -EINVAL;
|
|
|
|
dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n",
|
|
manfid, devid, ca->slot_info[slot].config_base,
|
|
ca->slot_info[slot].config_option);
|
|
|
|
// success!
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_set_configoption - Set CAM's configoption correctly.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot containing the CAM.
|
|
*/
|
|
static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot)
|
|
{
|
|
int configoption;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* set the config option */
|
|
ca->pub->write_attribute_mem(ca->pub, slot,
|
|
ca->slot_info[slot].config_base,
|
|
ca->slot_info[slot].config_option);
|
|
|
|
/* check it */
|
|
configoption = ca->pub->read_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base);
|
|
dprintk("Set configoption 0x%x, read configoption 0x%x\n",
|
|
ca->slot_info[slot].config_option, configoption & 0x3f);
|
|
|
|
/* fine! */
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_read_data - This function talks to an EN50221 CAM control
|
|
* interface. It reads a buffer of data from the CAM. The data can either
|
|
* be stored in a supplied buffer, or automatically be added to the slot's
|
|
* rx_buffer.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot to read from.
|
|
* @ebuf: If non-NULL, the data will be written to this buffer. If NULL,
|
|
* the data will be added into the buffering system as a normal fragment.
|
|
* @ecount: Size of ebuf. Ignored if ebuf is NULL.
|
|
*
|
|
* @return Number of bytes read, or < 0 on error
|
|
*/
|
|
static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount)
|
|
{
|
|
int bytes_read;
|
|
int status;
|
|
u8 buf[HOST_LINK_BUF_SIZE];
|
|
int i;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* check if we have space for a link buf in the rx_buffer */
|
|
if (ebuf == NULL) {
|
|
int buf_free;
|
|
|
|
if (ca->slot_info[slot].rx_buffer.data == NULL) {
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer);
|
|
|
|
if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) {
|
|
status = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
/* check if there is data available */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
|
|
goto exit;
|
|
if (!(status & STATUSREG_DA)) {
|
|
/* no data */
|
|
status = 0;
|
|
goto exit;
|
|
}
|
|
|
|
/* read the amount of data */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0)
|
|
goto exit;
|
|
bytes_read = status << 8;
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0)
|
|
goto exit;
|
|
bytes_read |= status;
|
|
|
|
/* check it will fit */
|
|
if (ebuf == NULL) {
|
|
if (bytes_read > ca->slot_info[slot].link_buf_size) {
|
|
pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",
|
|
ca->dvbdev->adapter->num, bytes_read,
|
|
ca->slot_info[slot].link_buf_size);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
if (bytes_read < 2) {
|
|
pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
} else {
|
|
if (bytes_read > ecount) {
|
|
pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",
|
|
ca->dvbdev->adapter->num);
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
/* fill the buffer */
|
|
for (i = 0; i < bytes_read; i++) {
|
|
/* read byte and check */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0)
|
|
goto exit;
|
|
|
|
/* OK, store it in the buffer */
|
|
buf[i] = status;
|
|
}
|
|
|
|
/* check for read error (RE should now be 0) */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
|
|
goto exit;
|
|
if (status & STATUSREG_RE) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
|
|
/* OK, add it to the receive buffer, or copy into external buffer if supplied */
|
|
if (ebuf == NULL) {
|
|
if (ca->slot_info[slot].rx_buffer.data == NULL) {
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read);
|
|
} else {
|
|
memcpy(ebuf, buf, bytes_read);
|
|
}
|
|
|
|
dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot,
|
|
buf[0], (buf[1] & 0x80) == 0, bytes_read);
|
|
|
|
/* wake up readers when a last_fragment is received */
|
|
if ((buf[1] & 0x80) == 0x00) {
|
|
wake_up_interruptible(&ca->wait_queue);
|
|
}
|
|
status = bytes_read;
|
|
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_write_data - This function talks to an EN50221 CAM control
|
|
* interface. It writes a buffer of data to a CAM.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot to write to.
|
|
* @ebuf: The data in this buffer is treated as a complete link-level packet to
|
|
* be written.
|
|
* @count: Size of ebuf.
|
|
*
|
|
* @return Number of bytes written, or < 0 on error.
|
|
*/
|
|
static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * buf, int bytes_write)
|
|
{
|
|
int status;
|
|
int i;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
|
|
/* sanity check */
|
|
if (bytes_write > ca->slot_info[slot].link_buf_size)
|
|
return -EINVAL;
|
|
|
|
/* it is possible we are dealing with a single buffer implementation,
|
|
thus if there is data available for read or if there is even a read
|
|
already in progress, we do nothing but awake the kernel thread to
|
|
process the data if necessary. */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
|
|
goto exitnowrite;
|
|
if (status & (STATUSREG_DA | STATUSREG_RE)) {
|
|
if (status & STATUSREG_DA)
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
|
|
status = -EAGAIN;
|
|
goto exitnowrite;
|
|
}
|
|
|
|
/* OK, set HC bit */
|
|
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND,
|
|
IRQEN | CMDREG_HC)) != 0)
|
|
goto exit;
|
|
|
|
/* check if interface is still free */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
|
|
goto exit;
|
|
if (!(status & STATUSREG_FR)) {
|
|
/* it wasn't free => try again later */
|
|
status = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* It may need some time for the CAM to settle down, or there might
|
|
* be a race condition between the CAM, writing HC and our last
|
|
* check for DA. This happens, if the CAM asserts DA, just after
|
|
* checking DA before we are setting HC. In this case it might be
|
|
* a bug in the CAM to keep the FR bit, the lower layer/HW
|
|
* communication requires a longer timeout or the CAM needs more
|
|
* time internally. But this happens in reality!
|
|
* We need to read the status from the HW again and do the same
|
|
* we did for the previous check for DA
|
|
*/
|
|
status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
|
|
if (status < 0)
|
|
goto exit;
|
|
|
|
if (status & (STATUSREG_DA | STATUSREG_RE)) {
|
|
if (status & STATUSREG_DA)
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
|
|
status = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
|
|
/* send the amount of data */
|
|
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0)
|
|
goto exit;
|
|
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW,
|
|
bytes_write & 0xff)) != 0)
|
|
goto exit;
|
|
|
|
/* send the buffer */
|
|
for (i = 0; i < bytes_write; i++) {
|
|
if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, buf[i])) != 0)
|
|
goto exit;
|
|
}
|
|
|
|
/* check for write error (WE should now be 0) */
|
|
if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0)
|
|
goto exit;
|
|
if (status & STATUSREG_WE) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
status = bytes_write;
|
|
|
|
dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot,
|
|
buf[0], (buf[1] & 0x80) == 0, bytes_write);
|
|
|
|
exit:
|
|
ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN);
|
|
|
|
exitnowrite:
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq);
|
|
|
|
|
|
|
|
/* ******************************************************************************** */
|
|
/* EN50221 higher level functions */
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_camready_irq - A CAM has been removed => shut it down.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot to shut down.
|
|
*/
|
|
static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot)
|
|
{
|
|
dprintk("%s\n", __func__);
|
|
|
|
ca->pub->slot_shutdown(ca->pub, slot);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
|
|
|
|
/* need to wake up all processes to check if they're now
|
|
trying to write to a defunct CAM */
|
|
wake_up_interruptible(&ca->wait_queue);
|
|
|
|
dprintk("Slot %i shutdown\n", slot);
|
|
|
|
/* success */
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(dvb_ca_en50221_camready_irq);
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_camready_irq - A CAMCHANGE IRQ has occurred.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot concerned.
|
|
* @change_type: One of the DVB_CA_CAMCHANGE_* values.
|
|
*/
|
|
void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type)
|
|
{
|
|
struct dvb_ca_private *ca = pubca->private;
|
|
|
|
dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type);
|
|
|
|
switch (change_type) {
|
|
case DVB_CA_EN50221_CAMCHANGE_REMOVED:
|
|
case DVB_CA_EN50221_CAMCHANGE_INSERTED:
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
|
|
ca->slot_info[slot].camchange_type = change_type;
|
|
atomic_inc(&ca->slot_info[slot].camchange_count);
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
}
|
|
EXPORT_SYMBOL(dvb_ca_en50221_frda_irq);
|
|
|
|
|
|
/**
|
|
* dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot concerned.
|
|
*/
|
|
void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
|
|
{
|
|
struct dvb_ca_private *ca = pubca->private;
|
|
|
|
dprintk("CAMREADY IRQ slot:%i\n", slot);
|
|
|
|
if (ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE;
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* An FR or DA IRQ has occurred.
|
|
*
|
|
* @ca: CA instance.
|
|
* @slot: Slot concerned.
|
|
*/
|
|
void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
|
|
{
|
|
struct dvb_ca_private *ca = pubca->private;
|
|
int flags;
|
|
|
|
dprintk("FR/DA IRQ slot:%i\n", slot);
|
|
|
|
switch (ca->slot_info[slot].slot_state) {
|
|
case DVB_CA_SLOTSTATE_LINKINIT:
|
|
flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS);
|
|
if (flags & STATUSREG_DA) {
|
|
dprintk("CAM supports DA IRQ\n");
|
|
ca->slot_info[slot].da_irq_supported = 1;
|
|
}
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_RUNNING:
|
|
if (ca->open)
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/* ******************************************************************************** */
|
|
/* EN50221 thread functions */
|
|
|
|
/**
|
|
* Wake up the DVB CA thread
|
|
*
|
|
* @ca: CA instance.
|
|
*/
|
|
static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca)
|
|
{
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
ca->wakeup = 1;
|
|
mb();
|
|
wake_up_process(ca->thread);
|
|
}
|
|
|
|
/**
|
|
* Update the delay used by the thread.
|
|
*
|
|
* @ca: CA instance.
|
|
*/
|
|
static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca)
|
|
{
|
|
int delay;
|
|
int curdelay = 100000000;
|
|
int slot;
|
|
|
|
/* Beware of too high polling frequency, because one polling
|
|
* call might take several hundred milliseconds until timeout!
|
|
*/
|
|
for (slot = 0; slot < ca->slot_count; slot++) {
|
|
switch (ca->slot_info[slot].slot_state) {
|
|
default:
|
|
case DVB_CA_SLOTSTATE_NONE:
|
|
delay = HZ * 60; /* 60s */
|
|
if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
|
|
delay = HZ * 5; /* 5s */
|
|
break;
|
|
case DVB_CA_SLOTSTATE_INVALID:
|
|
delay = HZ * 60; /* 60s */
|
|
if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
|
|
delay = HZ / 10; /* 100ms */
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_UNINITIALISED:
|
|
case DVB_CA_SLOTSTATE_WAITREADY:
|
|
case DVB_CA_SLOTSTATE_VALIDATE:
|
|
case DVB_CA_SLOTSTATE_WAITFR:
|
|
case DVB_CA_SLOTSTATE_LINKINIT:
|
|
delay = HZ / 10; /* 100ms */
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_RUNNING:
|
|
delay = HZ * 60; /* 60s */
|
|
if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
|
|
delay = HZ / 10; /* 100ms */
|
|
if (ca->open) {
|
|
if ((!ca->slot_info[slot].da_irq_supported) ||
|
|
(!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA)))
|
|
delay = HZ / 10; /* 100ms */
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (delay < curdelay)
|
|
curdelay = delay;
|
|
}
|
|
|
|
ca->delay = curdelay;
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* Kernel thread which monitors CA slots for CAM changes, and performs data transfers.
|
|
*/
|
|
static int dvb_ca_en50221_thread(void *data)
|
|
{
|
|
struct dvb_ca_private *ca = data;
|
|
int slot;
|
|
int flags;
|
|
int status;
|
|
int pktcount;
|
|
void *rxbuf;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* choose the correct initial delay */
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
|
|
/* main loop */
|
|
while (!kthread_should_stop()) {
|
|
/* sleep for a bit */
|
|
if (!ca->wakeup) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(ca->delay);
|
|
if (kthread_should_stop())
|
|
return 0;
|
|
}
|
|
ca->wakeup = 0;
|
|
|
|
/* go through all the slots processing them */
|
|
for (slot = 0; slot < ca->slot_count; slot++) {
|
|
|
|
mutex_lock(&ca->slot_info[slot].slot_lock);
|
|
|
|
// check the cam status + deal with CAMCHANGEs
|
|
while (dvb_ca_en50221_check_camstatus(ca, slot)) {
|
|
/* clear down an old CI slot if necessary */
|
|
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE)
|
|
dvb_ca_en50221_slot_shutdown(ca, slot);
|
|
|
|
/* if a CAM is NOW present, initialise it */
|
|
if (ca->slot_info[slot].camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_UNINITIALISED;
|
|
}
|
|
|
|
/* we've handled one CAMCHANGE */
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
atomic_dec(&ca->slot_info[slot].camchange_count);
|
|
}
|
|
|
|
// CAM state machine
|
|
switch (ca->slot_info[slot].slot_state) {
|
|
case DVB_CA_SLOTSTATE_NONE:
|
|
case DVB_CA_SLOTSTATE_INVALID:
|
|
// no action needed
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_UNINITIALISED:
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITREADY;
|
|
ca->pub->slot_reset(ca->pub, slot);
|
|
ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_WAITREADY:
|
|
if (time_after(jiffies, ca->slot_info[slot].timeout)) {
|
|
pr_err("dvb_ca adaptor %d: PC card did not respond :(\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
// no other action needed; will automatically change state when ready
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_VALIDATE:
|
|
if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) {
|
|
/* we need this extra check for annoying interfaces like the budget-av */
|
|
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
|
|
(ca->pub->poll_slot_status)) {
|
|
status = ca->pub->poll_slot_status(ca->pub, slot, 0);
|
|
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
}
|
|
|
|
pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
if (dvb_ca_en50221_set_configoption(ca, slot) != 0) {
|
|
pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
if (ca->pub->write_cam_control(ca->pub, slot,
|
|
CTRLIF_COMMAND, CMDREG_RS) != 0) {
|
|
pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
dprintk("DVB CAM validated successfully\n");
|
|
|
|
ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITFR;
|
|
ca->wakeup = 1;
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_WAITFR:
|
|
if (time_after(jiffies, ca->slot_info[slot].timeout)) {
|
|
pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
|
|
flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
|
|
if (flags & STATUSREG_FR) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT;
|
|
ca->wakeup = 1;
|
|
}
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_LINKINIT:
|
|
if (dvb_ca_en50221_link_init(ca, slot) != 0) {
|
|
/* we need this extra check for annoying interfaces like the budget-av */
|
|
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
|
|
(ca->pub->poll_slot_status)) {
|
|
status = ca->pub->poll_slot_status(ca->pub, slot, 0);
|
|
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
}
|
|
|
|
pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
|
|
if (ca->slot_info[slot].rx_buffer.data == NULL) {
|
|
rxbuf = vmalloc(RX_BUFFER_SIZE);
|
|
if (rxbuf == NULL) {
|
|
pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n",
|
|
ca->dvbdev->adapter->num);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
break;
|
|
}
|
|
dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE);
|
|
}
|
|
|
|
ca->pub->slot_ts_enable(ca->pub, slot);
|
|
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
pr_err("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n",
|
|
ca->dvbdev->adapter->num);
|
|
break;
|
|
|
|
case DVB_CA_SLOTSTATE_RUNNING:
|
|
if (!ca->open)
|
|
break;
|
|
|
|
// poll slots for data
|
|
pktcount = 0;
|
|
while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) {
|
|
if (!ca->open)
|
|
break;
|
|
|
|
/* if a CAMCHANGE occurred at some point, do not do any more processing of this slot */
|
|
if (dvb_ca_en50221_check_camstatus(ca, slot)) {
|
|
// we dont want to sleep on the next iteration so we can handle the cam change
|
|
ca->wakeup = 1;
|
|
break;
|
|
}
|
|
|
|
/* check if we've hit our limit this time */
|
|
if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) {
|
|
// dont sleep; there is likely to be more data to read
|
|
ca->wakeup = 1;
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&ca->slot_info[slot].slot_lock);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/* ******************************************************************************** */
|
|
/* EN50221 IO interface functions */
|
|
|
|
/**
|
|
* Real ioctl implementation.
|
|
* NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them.
|
|
*
|
|
* @inode: Inode concerned.
|
|
* @file: File concerned.
|
|
* @cmd: IOCTL command.
|
|
* @arg: Associated argument.
|
|
*
|
|
* @return 0 on success, <0 on error.
|
|
*/
|
|
static int dvb_ca_en50221_io_do_ioctl(struct file *file,
|
|
unsigned int cmd, void *parg)
|
|
{
|
|
struct dvb_device *dvbdev = file->private_data;
|
|
struct dvb_ca_private *ca = dvbdev->priv;
|
|
int err = 0;
|
|
int slot;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (mutex_lock_interruptible(&ca->ioctl_mutex))
|
|
return -ERESTARTSYS;
|
|
|
|
switch (cmd) {
|
|
case CA_RESET:
|
|
for (slot = 0; slot < ca->slot_count; slot++) {
|
|
mutex_lock(&ca->slot_info[slot].slot_lock);
|
|
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) {
|
|
dvb_ca_en50221_slot_shutdown(ca, slot);
|
|
if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)
|
|
dvb_ca_en50221_camchange_irq(ca->pub,
|
|
slot,
|
|
DVB_CA_EN50221_CAMCHANGE_INSERTED);
|
|
}
|
|
mutex_unlock(&ca->slot_info[slot].slot_lock);
|
|
}
|
|
ca->next_read_slot = 0;
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
break;
|
|
|
|
case CA_GET_CAP: {
|
|
struct ca_caps *caps = parg;
|
|
|
|
caps->slot_num = ca->slot_count;
|
|
caps->slot_type = CA_CI_LINK;
|
|
caps->descr_num = 0;
|
|
caps->descr_type = 0;
|
|
break;
|
|
}
|
|
|
|
case CA_GET_SLOT_INFO: {
|
|
struct ca_slot_info *info = parg;
|
|
|
|
if ((info->num > ca->slot_count) || (info->num < 0)) {
|
|
err = -EINVAL;
|
|
goto out_unlock;
|
|
}
|
|
|
|
info->type = CA_CI_LINK;
|
|
info->flags = 0;
|
|
if ((ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_NONE)
|
|
&& (ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_INVALID)) {
|
|
info->flags = CA_CI_MODULE_PRESENT;
|
|
}
|
|
if (ca->slot_info[info->num].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
|
|
info->flags |= CA_CI_MODULE_READY;
|
|
}
|
|
break;
|
|
}
|
|
|
|
default:
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
out_unlock:
|
|
mutex_unlock(&ca->ioctl_mutex);
|
|
return err;
|
|
}
|
|
|
|
|
|
/**
|
|
* Wrapper for ioctl implementation.
|
|
*
|
|
* @inode: Inode concerned.
|
|
* @file: File concerned.
|
|
* @cmd: IOCTL command.
|
|
* @arg: Associated argument.
|
|
*
|
|
* @return 0 on success, <0 on error.
|
|
*/
|
|
static long dvb_ca_en50221_io_ioctl(struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl);
|
|
}
|
|
|
|
|
|
/**
|
|
* Implementation of write() syscall.
|
|
*
|
|
* @file: File structure.
|
|
* @buf: Source buffer.
|
|
* @count: Size of source buffer.
|
|
* @ppos: Position in file (ignored).
|
|
*
|
|
* @return Number of bytes read, or <0 on error.
|
|
*/
|
|
static ssize_t dvb_ca_en50221_io_write(struct file *file,
|
|
const char __user * buf, size_t count, loff_t * ppos)
|
|
{
|
|
struct dvb_device *dvbdev = file->private_data;
|
|
struct dvb_ca_private *ca = dvbdev->priv;
|
|
u8 slot, connection_id;
|
|
int status;
|
|
u8 fragbuf[HOST_LINK_BUF_SIZE];
|
|
int fragpos = 0;
|
|
int fraglen;
|
|
unsigned long timeout;
|
|
int written;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */
|
|
if (count < 2)
|
|
return -EINVAL;
|
|
|
|
/* extract slot & connection id */
|
|
if (copy_from_user(&slot, buf, 1))
|
|
return -EFAULT;
|
|
if (copy_from_user(&connection_id, buf + 1, 1))
|
|
return -EFAULT;
|
|
buf += 2;
|
|
count -= 2;
|
|
|
|
/* check if the slot is actually running */
|
|
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
|
|
return -EINVAL;
|
|
|
|
/* fragment the packets & store in the buffer */
|
|
while (fragpos < count) {
|
|
fraglen = ca->slot_info[slot].link_buf_size - 2;
|
|
if (fraglen < 0)
|
|
break;
|
|
if (fraglen > HOST_LINK_BUF_SIZE - 2)
|
|
fraglen = HOST_LINK_BUF_SIZE - 2;
|
|
if ((count - fragpos) < fraglen)
|
|
fraglen = count - fragpos;
|
|
|
|
fragbuf[0] = connection_id;
|
|
fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00;
|
|
status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen);
|
|
if (status) {
|
|
status = -EFAULT;
|
|
goto exit;
|
|
}
|
|
|
|
timeout = jiffies + HZ / 2;
|
|
written = 0;
|
|
while (!time_after(jiffies, timeout)) {
|
|
/* check the CAM hasn't been removed/reset in the meantime */
|
|
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) {
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
|
|
mutex_lock(&ca->slot_info[slot].slot_lock);
|
|
status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2);
|
|
mutex_unlock(&ca->slot_info[slot].slot_lock);
|
|
if (status == (fraglen + 2)) {
|
|
written = 1;
|
|
break;
|
|
}
|
|
if (status != -EAGAIN)
|
|
goto exit;
|
|
|
|
msleep(1);
|
|
}
|
|
if (!written) {
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
|
|
fragpos += fraglen;
|
|
}
|
|
status = count + 2;
|
|
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
|
|
/**
|
|
* Condition for waking up in dvb_ca_en50221_io_read_condition
|
|
*/
|
|
static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
|
|
int *result, int *_slot)
|
|
{
|
|
int slot;
|
|
int slot_count = 0;
|
|
int idx;
|
|
size_t fraglen;
|
|
int connection_id = -1;
|
|
int found = 0;
|
|
u8 hdr[2];
|
|
|
|
slot = ca->next_read_slot;
|
|
while ((slot_count < ca->slot_count) && (!found)) {
|
|
if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING)
|
|
goto nextslot;
|
|
|
|
if (ca->slot_info[slot].rx_buffer.data == NULL) {
|
|
return 0;
|
|
}
|
|
|
|
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen);
|
|
while (idx != -1) {
|
|
dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2);
|
|
if (connection_id == -1)
|
|
connection_id = hdr[0];
|
|
if ((hdr[0] == connection_id) && ((hdr[1] & 0x80) == 0)) {
|
|
*_slot = slot;
|
|
found = 1;
|
|
break;
|
|
}
|
|
|
|
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
|
|
}
|
|
|
|
nextslot:
|
|
slot = (slot + 1) % ca->slot_count;
|
|
slot_count++;
|
|
}
|
|
|
|
ca->next_read_slot = slot;
|
|
return found;
|
|
}
|
|
|
|
|
|
/**
|
|
* Implementation of read() syscall.
|
|
*
|
|
* @file: File structure.
|
|
* @buf: Destination buffer.
|
|
* @count: Size of destination buffer.
|
|
* @ppos: Position in file (ignored).
|
|
*
|
|
* @return Number of bytes read, or <0 on error.
|
|
*/
|
|
static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf,
|
|
size_t count, loff_t * ppos)
|
|
{
|
|
struct dvb_device *dvbdev = file->private_data;
|
|
struct dvb_ca_private *ca = dvbdev->priv;
|
|
int status;
|
|
int result = 0;
|
|
u8 hdr[2];
|
|
int slot;
|
|
int connection_id = -1;
|
|
size_t idx, idx2;
|
|
int last_fragment = 0;
|
|
size_t fraglen;
|
|
int pktlen;
|
|
int dispose = 0;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */
|
|
if (count < 2)
|
|
return -EINVAL;
|
|
|
|
/* wait for some data */
|
|
if ((status = dvb_ca_en50221_io_read_condition(ca, &result, &slot)) == 0) {
|
|
|
|
/* if we're in nonblocking mode, exit immediately */
|
|
if (file->f_flags & O_NONBLOCK)
|
|
return -EWOULDBLOCK;
|
|
|
|
/* wait for some data */
|
|
status = wait_event_interruptible(ca->wait_queue,
|
|
dvb_ca_en50221_io_read_condition
|
|
(ca, &result, &slot));
|
|
}
|
|
if ((status < 0) || (result < 0)) {
|
|
if (result)
|
|
return result;
|
|
return status;
|
|
}
|
|
|
|
idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen);
|
|
pktlen = 2;
|
|
do {
|
|
if (idx == -1) {
|
|
pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n",
|
|
ca->dvbdev->adapter->num);
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
|
|
dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2);
|
|
if (connection_id == -1)
|
|
connection_id = hdr[0];
|
|
if (hdr[0] == connection_id) {
|
|
if (pktlen < count) {
|
|
if ((pktlen + fraglen - 2) > count) {
|
|
fraglen = count - pktlen;
|
|
} else {
|
|
fraglen -= 2;
|
|
}
|
|
|
|
if ((status = dvb_ringbuffer_pkt_read_user(&ca->slot_info[slot].rx_buffer, idx, 2,
|
|
buf + pktlen, fraglen)) < 0) {
|
|
goto exit;
|
|
}
|
|
pktlen += fraglen;
|
|
}
|
|
|
|
if ((hdr[1] & 0x80) == 0)
|
|
last_fragment = 1;
|
|
dispose = 1;
|
|
}
|
|
|
|
idx2 = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen);
|
|
if (dispose)
|
|
dvb_ringbuffer_pkt_dispose(&ca->slot_info[slot].rx_buffer, idx);
|
|
idx = idx2;
|
|
dispose = 0;
|
|
} while (!last_fragment);
|
|
|
|
hdr[0] = slot;
|
|
hdr[1] = connection_id;
|
|
status = copy_to_user(buf, hdr, 2);
|
|
if (status) {
|
|
status = -EFAULT;
|
|
goto exit;
|
|
}
|
|
status = pktlen;
|
|
|
|
exit:
|
|
return status;
|
|
}
|
|
|
|
|
|
/**
|
|
* Implementation of file open syscall.
|
|
*
|
|
* @inode: Inode concerned.
|
|
* @file: File concerned.
|
|
*
|
|
* @return 0 on success, <0 on failure.
|
|
*/
|
|
static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct dvb_device *dvbdev = file->private_data;
|
|
struct dvb_ca_private *ca = dvbdev->priv;
|
|
int err;
|
|
int i;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (!try_module_get(ca->pub->owner))
|
|
return -EIO;
|
|
|
|
err = dvb_generic_open(inode, file);
|
|
if (err < 0) {
|
|
module_put(ca->pub->owner);
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i < ca->slot_count; i++) {
|
|
|
|
if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) {
|
|
if (ca->slot_info[i].rx_buffer.data != NULL) {
|
|
/* it is safe to call this here without locks because
|
|
* ca->open == 0. Data is not read in this case */
|
|
dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer);
|
|
}
|
|
}
|
|
}
|
|
|
|
ca->open = 1;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
dvb_ca_en50221_thread_wakeup(ca);
|
|
|
|
dvb_ca_private_get(ca);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* Implementation of file close syscall.
|
|
*
|
|
* @inode: Inode concerned.
|
|
* @file: File concerned.
|
|
*
|
|
* @return 0 on success, <0 on failure.
|
|
*/
|
|
static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct dvb_device *dvbdev = file->private_data;
|
|
struct dvb_ca_private *ca = dvbdev->priv;
|
|
int err;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* mark the CA device as closed */
|
|
ca->open = 0;
|
|
dvb_ca_en50221_thread_update_delay(ca);
|
|
|
|
err = dvb_generic_release(inode, file);
|
|
|
|
module_put(ca->pub->owner);
|
|
|
|
dvb_ca_private_put(ca);
|
|
|
|
return err;
|
|
}
|
|
|
|
|
|
/**
|
|
* Implementation of poll() syscall.
|
|
*
|
|
* @file: File concerned.
|
|
* @wait: poll wait table.
|
|
*
|
|
* @return Standard poll mask.
|
|
*/
|
|
static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait)
|
|
{
|
|
struct dvb_device *dvbdev = file->private_data;
|
|
struct dvb_ca_private *ca = dvbdev->priv;
|
|
unsigned int mask = 0;
|
|
int slot;
|
|
int result = 0;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
|
|
mask |= POLLIN;
|
|
}
|
|
|
|
/* if there is something, return now */
|
|
if (mask)
|
|
return mask;
|
|
|
|
/* wait for something to happen */
|
|
poll_wait(file, &ca->wait_queue, wait);
|
|
|
|
if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) {
|
|
mask |= POLLIN;
|
|
}
|
|
|
|
return mask;
|
|
}
|
|
EXPORT_SYMBOL(dvb_ca_en50221_init);
|
|
|
|
|
|
static const struct file_operations dvb_ca_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = dvb_ca_en50221_io_read,
|
|
.write = dvb_ca_en50221_io_write,
|
|
.unlocked_ioctl = dvb_ca_en50221_io_ioctl,
|
|
.open = dvb_ca_en50221_io_open,
|
|
.release = dvb_ca_en50221_io_release,
|
|
.poll = dvb_ca_en50221_io_poll,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
static const struct dvb_device dvbdev_ca = {
|
|
.priv = NULL,
|
|
.users = 1,
|
|
.readers = 1,
|
|
.writers = 1,
|
|
#if defined(CONFIG_MEDIA_CONTROLLER_DVB)
|
|
.name = "dvb-ca-en50221",
|
|
#endif
|
|
.fops = &dvb_ca_fops,
|
|
};
|
|
|
|
/* ******************************************************************************** */
|
|
/* Initialisation/shutdown functions */
|
|
|
|
|
|
/**
|
|
* Initialise a new DVB CA EN50221 interface device.
|
|
*
|
|
* @dvb_adapter: DVB adapter to attach the new CA device to.
|
|
* @ca: The dvb_ca instance.
|
|
* @flags: Flags describing the CA device (DVB_CA_FLAG_*).
|
|
* @slot_count: Number of slots supported.
|
|
*
|
|
* @return 0 on success, nonzero on failure
|
|
*/
|
|
int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
|
|
struct dvb_ca_en50221 *pubca, int flags, int slot_count)
|
|
{
|
|
int ret;
|
|
struct dvb_ca_private *ca = NULL;
|
|
int i;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
if (slot_count < 1)
|
|
return -EINVAL;
|
|
|
|
/* initialise the system data */
|
|
if ((ca = kzalloc(sizeof(struct dvb_ca_private), GFP_KERNEL)) == NULL) {
|
|
ret = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
kref_init(&ca->refcount);
|
|
ca->pub = pubca;
|
|
ca->flags = flags;
|
|
ca->slot_count = slot_count;
|
|
if ((ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), GFP_KERNEL)) == NULL) {
|
|
ret = -ENOMEM;
|
|
goto free_ca;
|
|
}
|
|
init_waitqueue_head(&ca->wait_queue);
|
|
ca->open = 0;
|
|
ca->wakeup = 0;
|
|
ca->next_read_slot = 0;
|
|
pubca->private = ca;
|
|
|
|
/* register the DVB device */
|
|
ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, DVB_DEVICE_CA, 0);
|
|
if (ret)
|
|
goto free_slot_info;
|
|
|
|
/* now initialise each slot */
|
|
for (i = 0; i < slot_count; i++) {
|
|
memset(&ca->slot_info[i], 0, sizeof(struct dvb_ca_slot));
|
|
ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE;
|
|
atomic_set(&ca->slot_info[i].camchange_count, 0);
|
|
ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED;
|
|
mutex_init(&ca->slot_info[i].slot_lock);
|
|
}
|
|
|
|
mutex_init(&ca->ioctl_mutex);
|
|
|
|
if (signal_pending(current)) {
|
|
ret = -EINTR;
|
|
goto unregister_device;
|
|
}
|
|
mb();
|
|
|
|
/* create a kthread for monitoring this CA device */
|
|
ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i",
|
|
ca->dvbdev->adapter->num, ca->dvbdev->id);
|
|
if (IS_ERR(ca->thread)) {
|
|
ret = PTR_ERR(ca->thread);
|
|
pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n",
|
|
ret);
|
|
goto unregister_device;
|
|
}
|
|
return 0;
|
|
|
|
unregister_device:
|
|
dvb_unregister_device(ca->dvbdev);
|
|
free_slot_info:
|
|
kfree(ca->slot_info);
|
|
free_ca:
|
|
kfree(ca);
|
|
exit:
|
|
pubca->private = NULL;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(dvb_ca_en50221_release);
|
|
|
|
|
|
|
|
/**
|
|
* Release a DVB CA EN50221 interface device.
|
|
*
|
|
* @ca_dev: The dvb_device_t instance for the CA device.
|
|
* @ca: The associated dvb_ca instance.
|
|
*/
|
|
void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
|
|
{
|
|
struct dvb_ca_private *ca = pubca->private;
|
|
int i;
|
|
|
|
dprintk("%s\n", __func__);
|
|
|
|
/* shutdown the thread if there was one */
|
|
kthread_stop(ca->thread);
|
|
|
|
for (i = 0; i < ca->slot_count; i++) {
|
|
dvb_ca_en50221_slot_shutdown(ca, i);
|
|
}
|
|
dvb_remove_device(ca->dvbdev);
|
|
dvb_ca_private_put(ca);
|
|
pubca->private = NULL;
|
|
}
|