![Andi Shyti](/assets/img/avatar_default.png)
The driver type can be assigned immediately when an RC device requests to the framework to allocate the device. This is an 'enum rc_driver_type' data type and specifies whether the device is a raw receiver or scancode receiver. The type will be given as parameter to the rc_allocate_device device. Change accordingly all the drivers calling rc_allocate_device() so that the device type is specified during the rc device allocation. Whenever the device type is not specified, it will be set as RC_DRIVER_SCANCODE which was the default '0' value. Suggested-by: Sean Young <sean@mess.org> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
1213 lines
31 KiB
C
1213 lines
31 KiB
C
/*
|
|
* driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)
|
|
*
|
|
* Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* Special thanks to:
|
|
* Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore
|
|
* bringing to life support for transmission & learning mode.
|
|
*
|
|
* Charlie Andrews <charliethepilot@googlemail.com> for lots of help in
|
|
* bringing up the support of new firmware buffer that is popular
|
|
* on latest notebooks
|
|
*
|
|
* ENE for partial device documentation
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/io.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <media/rc-core.h>
|
|
#include "ene_ir.h"
|
|
|
|
static int sample_period;
|
|
static bool learning_mode_force;
|
|
static int debug;
|
|
static bool txsim;
|
|
|
|
static void ene_set_reg_addr(struct ene_device *dev, u16 reg)
|
|
{
|
|
outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
|
|
outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
|
|
}
|
|
|
|
/* read a hardware register */
|
|
static u8 ene_read_reg(struct ene_device *dev, u16 reg)
|
|
{
|
|
u8 retval;
|
|
ene_set_reg_addr(dev, reg);
|
|
retval = inb(dev->hw_io + ENE_IO);
|
|
dbg_regs("reg %04x == %02x", reg, retval);
|
|
return retval;
|
|
}
|
|
|
|
/* write a hardware register */
|
|
static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value)
|
|
{
|
|
dbg_regs("reg %04x <- %02x", reg, value);
|
|
ene_set_reg_addr(dev, reg);
|
|
outb(value, dev->hw_io + ENE_IO);
|
|
}
|
|
|
|
/* Set bits in hardware register */
|
|
static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
|
|
{
|
|
dbg_regs("reg %04x |= %02x", reg, mask);
|
|
ene_set_reg_addr(dev, reg);
|
|
outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO);
|
|
}
|
|
|
|
/* Clear bits in hardware register */
|
|
static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
|
|
{
|
|
dbg_regs("reg %04x &= ~%02x ", reg, mask);
|
|
ene_set_reg_addr(dev, reg);
|
|
outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO);
|
|
}
|
|
|
|
/* A helper to set/clear a bit in register according to boolean variable */
|
|
static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask,
|
|
bool set)
|
|
{
|
|
if (set)
|
|
ene_set_reg_mask(dev, reg, mask);
|
|
else
|
|
ene_clear_reg_mask(dev, reg, mask);
|
|
}
|
|
|
|
/* detect hardware features */
|
|
static int ene_hw_detect(struct ene_device *dev)
|
|
{
|
|
u8 chip_major, chip_minor;
|
|
u8 hw_revision, old_ver;
|
|
u8 fw_reg2, fw_reg1;
|
|
|
|
ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
|
|
chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR);
|
|
chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR);
|
|
ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
|
|
|
|
hw_revision = ene_read_reg(dev, ENE_ECHV);
|
|
old_ver = ene_read_reg(dev, ENE_HW_VER_OLD);
|
|
|
|
dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) +
|
|
(ene_read_reg(dev, ENE_PLLFRL) >> 4);
|
|
|
|
if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD)
|
|
dev->rx_period_adjust =
|
|
dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
|
|
|
|
if (hw_revision == 0xFF) {
|
|
pr_warn("device seems to be disabled\n");
|
|
pr_warn("send a mail to lirc-list@lists.sourceforge.net\n");
|
|
pr_warn("please attach output of acpidump and dmidecode\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pr_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
|
|
chip_major, chip_minor, old_ver, hw_revision);
|
|
|
|
pr_notice("PLL freq = %d\n", dev->pll_freq);
|
|
|
|
if (chip_major == 0x33) {
|
|
pr_warn("chips 0x33xx aren't supported\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
|
|
dev->hw_revision = ENE_HW_C;
|
|
pr_notice("KB3926C detected\n");
|
|
} else if (old_ver == 0x24 && hw_revision == 0xC0) {
|
|
dev->hw_revision = ENE_HW_B;
|
|
pr_notice("KB3926B detected\n");
|
|
} else {
|
|
dev->hw_revision = ENE_HW_D;
|
|
pr_notice("KB3926D or higher detected\n");
|
|
}
|
|
|
|
/* detect features hardware supports */
|
|
if (dev->hw_revision < ENE_HW_C)
|
|
return 0;
|
|
|
|
fw_reg1 = ene_read_reg(dev, ENE_FW1);
|
|
fw_reg2 = ene_read_reg(dev, ENE_FW2);
|
|
|
|
pr_notice("Firmware regs: %02x %02x\n", fw_reg1, fw_reg2);
|
|
|
|
dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
|
|
dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
|
|
dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF);
|
|
|
|
if (dev->hw_learning_and_tx_capable)
|
|
dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
|
|
|
|
pr_notice("Hardware features:\n");
|
|
|
|
if (dev->hw_learning_and_tx_capable) {
|
|
pr_notice("* Supports transmitting & learning mode\n");
|
|
pr_notice(" This feature is rare and therefore,\n");
|
|
pr_notice(" you are welcome to test it,\n");
|
|
pr_notice(" and/or contact the author via:\n");
|
|
pr_notice(" lirc-list@lists.sourceforge.net\n");
|
|
pr_notice(" or maximlevitsky@gmail.com\n");
|
|
|
|
pr_notice("* Uses GPIO %s for IR raw input\n",
|
|
dev->hw_use_gpio_0a ? "40" : "0A");
|
|
|
|
if (dev->hw_fan_input)
|
|
pr_notice("* Uses unused fan feedback input as source of demodulated IR data\n");
|
|
}
|
|
|
|
if (!dev->hw_fan_input)
|
|
pr_notice("* Uses GPIO %s for IR demodulated input\n",
|
|
dev->hw_use_gpio_0a ? "0A" : "40");
|
|
|
|
if (dev->hw_extra_buffer)
|
|
pr_notice("* Uses new style input buffer\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Read properities of hw sample buffer */
|
|
static void ene_rx_setup_hw_buffer(struct ene_device *dev)
|
|
{
|
|
u16 tmp;
|
|
|
|
ene_rx_read_hw_pointer(dev);
|
|
dev->r_pointer = dev->w_pointer;
|
|
|
|
if (!dev->hw_extra_buffer) {
|
|
dev->buffer_len = ENE_FW_PACKET_SIZE * 2;
|
|
return;
|
|
}
|
|
|
|
tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER);
|
|
tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8;
|
|
dev->extra_buf1_address = tmp;
|
|
|
|
dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2);
|
|
|
|
tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3);
|
|
tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8;
|
|
dev->extra_buf2_address = tmp;
|
|
|
|
dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5);
|
|
|
|
dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
|
|
|
|
pr_notice("Hardware uses 2 extended buffers:\n");
|
|
pr_notice(" 0x%04x - len : %d\n",
|
|
dev->extra_buf1_address, dev->extra_buf1_len);
|
|
pr_notice(" 0x%04x - len : %d\n",
|
|
dev->extra_buf2_address, dev->extra_buf2_len);
|
|
|
|
pr_notice("Total buffer len = %d\n", dev->buffer_len);
|
|
|
|
if (dev->buffer_len > 64 || dev->buffer_len < 16)
|
|
goto error;
|
|
|
|
if (dev->extra_buf1_address > 0xFBFC ||
|
|
dev->extra_buf1_address < 0xEC00)
|
|
goto error;
|
|
|
|
if (dev->extra_buf2_address > 0xFBFC ||
|
|
dev->extra_buf2_address < 0xEC00)
|
|
goto error;
|
|
|
|
if (dev->r_pointer > dev->buffer_len)
|
|
goto error;
|
|
|
|
ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
|
|
return;
|
|
error:
|
|
pr_warn("Error validating extra buffers, device probably won't work\n");
|
|
dev->hw_extra_buffer = false;
|
|
ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
|
|
}
|
|
|
|
|
|
/* Restore the pointers to extra buffers - to make module reload work*/
|
|
static void ene_rx_restore_hw_buffer(struct ene_device *dev)
|
|
{
|
|
if (!dev->hw_extra_buffer)
|
|
return;
|
|
|
|
ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0,
|
|
dev->extra_buf1_address & 0xFF);
|
|
ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1,
|
|
dev->extra_buf1_address >> 8);
|
|
ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len);
|
|
|
|
ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3,
|
|
dev->extra_buf2_address & 0xFF);
|
|
ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4,
|
|
dev->extra_buf2_address >> 8);
|
|
ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5,
|
|
dev->extra_buf2_len);
|
|
ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
|
|
}
|
|
|
|
/* Read hardware write pointer */
|
|
static void ene_rx_read_hw_pointer(struct ene_device *dev)
|
|
{
|
|
if (dev->hw_extra_buffer)
|
|
dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER);
|
|
else
|
|
dev->w_pointer = ene_read_reg(dev, ENE_FW2)
|
|
& ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE;
|
|
|
|
dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x",
|
|
dev->w_pointer, dev->r_pointer);
|
|
}
|
|
|
|
/* Gets address of next sample from HW ring buffer */
|
|
static int ene_rx_get_sample_reg(struct ene_device *dev)
|
|
{
|
|
int r_pointer;
|
|
|
|
if (dev->r_pointer == dev->w_pointer) {
|
|
dbg_verbose("RB: hit end, try update w_pointer");
|
|
ene_rx_read_hw_pointer(dev);
|
|
}
|
|
|
|
if (dev->r_pointer == dev->w_pointer) {
|
|
dbg_verbose("RB: end of data at %d", dev->r_pointer);
|
|
return 0;
|
|
}
|
|
|
|
dbg_verbose("RB: reading at offset %d", dev->r_pointer);
|
|
r_pointer = dev->r_pointer;
|
|
|
|
dev->r_pointer++;
|
|
if (dev->r_pointer == dev->buffer_len)
|
|
dev->r_pointer = 0;
|
|
|
|
dbg_verbose("RB: next read will be from offset %d", dev->r_pointer);
|
|
|
|
if (r_pointer < 8) {
|
|
dbg_verbose("RB: read at main buffer at %d", r_pointer);
|
|
return ENE_FW_SAMPLE_BUFFER + r_pointer;
|
|
}
|
|
|
|
r_pointer -= 8;
|
|
|
|
if (r_pointer < dev->extra_buf1_len) {
|
|
dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer);
|
|
return dev->extra_buf1_address + r_pointer;
|
|
}
|
|
|
|
r_pointer -= dev->extra_buf1_len;
|
|
|
|
if (r_pointer < dev->extra_buf2_len) {
|
|
dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer);
|
|
return dev->extra_buf2_address + r_pointer;
|
|
}
|
|
|
|
dbg("attempt to read beyond ring buffer end");
|
|
return 0;
|
|
}
|
|
|
|
/* Sense current received carrier */
|
|
static void ene_rx_sense_carrier(struct ene_device *dev)
|
|
{
|
|
DEFINE_IR_RAW_EVENT(ev);
|
|
|
|
int carrier, duty_cycle;
|
|
int period = ene_read_reg(dev, ENE_CIRCAR_PRD);
|
|
int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD);
|
|
|
|
if (!(period & ENE_CIRCAR_PRD_VALID))
|
|
return;
|
|
|
|
period &= ~ENE_CIRCAR_PRD_VALID;
|
|
|
|
if (!period)
|
|
return;
|
|
|
|
dbg("RX: hardware carrier period = %02x", period);
|
|
dbg("RX: hardware carrier pulse period = %02x", hperiod);
|
|
|
|
carrier = 2000000 / period;
|
|
duty_cycle = (hperiod * 100) / period;
|
|
dbg("RX: sensed carrier = %d Hz, duty cycle %d%%",
|
|
carrier, duty_cycle);
|
|
if (dev->carrier_detect_enabled) {
|
|
ev.carrier_report = true;
|
|
ev.carrier = carrier;
|
|
ev.duty_cycle = duty_cycle;
|
|
ir_raw_event_store(dev->rdev, &ev);
|
|
}
|
|
}
|
|
|
|
/* this enables/disables the CIR RX engine */
|
|
static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable)
|
|
{
|
|
ene_set_clear_reg_mask(dev, ENE_CIRCFG,
|
|
ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable);
|
|
}
|
|
|
|
/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/
|
|
static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a)
|
|
{
|
|
ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a);
|
|
}
|
|
|
|
/*
|
|
* this enables alternative input via fan tachometer sensor and bypasses
|
|
* the hw CIR engine
|
|
*/
|
|
static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable)
|
|
{
|
|
if (!dev->hw_fan_input)
|
|
return;
|
|
|
|
if (!enable)
|
|
ene_write_reg(dev, ENE_FAN_AS_IN1, 0);
|
|
else {
|
|
ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
|
|
ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
|
|
}
|
|
}
|
|
|
|
/* setup the receiver for RX*/
|
|
static void ene_rx_setup(struct ene_device *dev)
|
|
{
|
|
bool learning_mode = dev->learning_mode_enabled ||
|
|
dev->carrier_detect_enabled;
|
|
int sample_period_adjust = 0;
|
|
|
|
dbg("RX: setup receiver, learning mode = %d", learning_mode);
|
|
|
|
|
|
/* This selects RLC input and clears CFG2 settings */
|
|
ene_write_reg(dev, ENE_CIRCFG2, 0x00);
|
|
|
|
/* set sample period*/
|
|
if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD)
|
|
sample_period_adjust =
|
|
dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2;
|
|
|
|
ene_write_reg(dev, ENE_CIRRLC_CFG,
|
|
(sample_period + sample_period_adjust) |
|
|
ENE_CIRRLC_CFG_OVERFLOW);
|
|
/* revB doesn't support inputs */
|
|
if (dev->hw_revision < ENE_HW_C)
|
|
goto select_timeout;
|
|
|
|
if (learning_mode) {
|
|
|
|
WARN_ON(!dev->hw_learning_and_tx_capable);
|
|
|
|
/* Enable the opposite of the normal input
|
|
That means that if GPIO40 is normally used, use GPIO0A
|
|
and vice versa.
|
|
This input will carry non demodulated
|
|
signal, and we will tell the hw to demodulate it itself */
|
|
ene_rx_select_input(dev, !dev->hw_use_gpio_0a);
|
|
dev->rx_fan_input_inuse = false;
|
|
|
|
/* Enable carrier demodulation */
|
|
ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
|
|
|
|
/* Enable carrier detection */
|
|
ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63);
|
|
ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT,
|
|
dev->carrier_detect_enabled || debug);
|
|
} else {
|
|
if (dev->hw_fan_input)
|
|
dev->rx_fan_input_inuse = true;
|
|
else
|
|
ene_rx_select_input(dev, dev->hw_use_gpio_0a);
|
|
|
|
/* Disable carrier detection & demodulation */
|
|
ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
|
|
ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT);
|
|
}
|
|
|
|
select_timeout:
|
|
if (dev->rx_fan_input_inuse) {
|
|
dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
|
|
|
|
/* Fan input doesn't support timeouts, it just ends the
|
|
input with a maximum sample */
|
|
dev->rdev->min_timeout = dev->rdev->max_timeout =
|
|
US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
|
|
ENE_FW_SAMPLE_PERIOD_FAN);
|
|
} else {
|
|
dev->rdev->rx_resolution = US_TO_NS(sample_period);
|
|
|
|
/* Theoreticly timeout is unlimited, but we cap it
|
|
* because it was seen that on one device, it
|
|
* would stop sending spaces after around 250 msec.
|
|
* Besides, this is close to 2^32 anyway and timeout is u32.
|
|
*/
|
|
dev->rdev->min_timeout = US_TO_NS(127 * sample_period);
|
|
dev->rdev->max_timeout = US_TO_NS(200000);
|
|
}
|
|
|
|
if (dev->hw_learning_and_tx_capable)
|
|
dev->rdev->tx_resolution = US_TO_NS(sample_period);
|
|
|
|
if (dev->rdev->timeout > dev->rdev->max_timeout)
|
|
dev->rdev->timeout = dev->rdev->max_timeout;
|
|
if (dev->rdev->timeout < dev->rdev->min_timeout)
|
|
dev->rdev->timeout = dev->rdev->min_timeout;
|
|
}
|
|
|
|
/* Enable the device for receive */
|
|
static void ene_rx_enable_hw(struct ene_device *dev)
|
|
{
|
|
u8 reg_value;
|
|
|
|
/* Enable system interrupt */
|
|
if (dev->hw_revision < ENE_HW_C) {
|
|
ene_write_reg(dev, ENEB_IRQ, dev->irq << 1);
|
|
ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
|
|
} else {
|
|
reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0;
|
|
reg_value |= ENE_IRQ_UNK_EN;
|
|
reg_value &= ~ENE_IRQ_STATUS;
|
|
reg_value |= (dev->irq & ENE_IRQ_MASK);
|
|
ene_write_reg(dev, ENE_IRQ, reg_value);
|
|
}
|
|
|
|
/* Enable inputs */
|
|
ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse);
|
|
ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse);
|
|
|
|
/* ack any pending irqs - just in case */
|
|
ene_irq_status(dev);
|
|
|
|
/* enable firmware bits */
|
|
ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
|
|
|
|
/* enter idle mode */
|
|
ir_raw_event_set_idle(dev->rdev, true);
|
|
}
|
|
|
|
/* Enable the device for receive - wrapper to track the state*/
|
|
static void ene_rx_enable(struct ene_device *dev)
|
|
{
|
|
ene_rx_enable_hw(dev);
|
|
dev->rx_enabled = true;
|
|
}
|
|
|
|
/* Disable the device receiver */
|
|
static void ene_rx_disable_hw(struct ene_device *dev)
|
|
{
|
|
/* disable inputs */
|
|
ene_rx_enable_cir_engine(dev, false);
|
|
ene_rx_enable_fan_input(dev, false);
|
|
|
|
/* disable hardware IRQ and firmware flag */
|
|
ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
|
|
ir_raw_event_set_idle(dev->rdev, true);
|
|
}
|
|
|
|
/* Disable the device receiver - wrapper to track the state */
|
|
static void ene_rx_disable(struct ene_device *dev)
|
|
{
|
|
ene_rx_disable_hw(dev);
|
|
dev->rx_enabled = false;
|
|
}
|
|
|
|
/* This resets the receiver. Useful to stop stream of spaces at end of
|
|
* transmission
|
|
*/
|
|
static void ene_rx_reset(struct ene_device *dev)
|
|
{
|
|
ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
|
|
ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
|
|
}
|
|
|
|
/* Set up the TX carrier frequency and duty cycle */
|
|
static void ene_tx_set_carrier(struct ene_device *dev)
|
|
{
|
|
u8 tx_puls_width;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
|
|
ene_set_clear_reg_mask(dev, ENE_CIRCFG,
|
|
ENE_CIRCFG_TX_CARR, dev->tx_period > 0);
|
|
|
|
if (!dev->tx_period)
|
|
goto unlock;
|
|
|
|
BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0);
|
|
|
|
tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle);
|
|
|
|
if (!tx_puls_width)
|
|
tx_puls_width = 1;
|
|
|
|
dbg("TX: pulse distance = %d * 500 ns", dev->tx_period);
|
|
dbg("TX: pulse width = %d * 500 ns", tx_puls_width);
|
|
|
|
ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL);
|
|
ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width);
|
|
unlock:
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
}
|
|
|
|
/* Enable/disable transmitters */
|
|
static void ene_tx_set_transmitters(struct ene_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41,
|
|
!!(dev->transmitter_mask & 0x01));
|
|
ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D,
|
|
!!(dev->transmitter_mask & 0x02));
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
}
|
|
|
|
/* prepare transmission */
|
|
static void ene_tx_enable(struct ene_device *dev)
|
|
{
|
|
u8 conf1 = ene_read_reg(dev, ENE_CIRCFG);
|
|
u8 fwreg2 = ene_read_reg(dev, ENE_FW2);
|
|
|
|
dev->saved_conf1 = conf1;
|
|
|
|
/* Show information about currently connected transmitter jacks */
|
|
if (fwreg2 & ENE_FW2_EMMITER1_CONN)
|
|
dbg("TX: Transmitter #1 is connected");
|
|
|
|
if (fwreg2 & ENE_FW2_EMMITER2_CONN)
|
|
dbg("TX: Transmitter #2 is connected");
|
|
|
|
if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
|
|
pr_warn("TX: transmitter cable isn't connected!\n");
|
|
|
|
/* disable receive on revc */
|
|
if (dev->hw_revision == ENE_HW_C)
|
|
conf1 &= ~ENE_CIRCFG_RX_EN;
|
|
|
|
/* Enable TX engine */
|
|
conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ;
|
|
ene_write_reg(dev, ENE_CIRCFG, conf1);
|
|
}
|
|
|
|
/* end transmission */
|
|
static void ene_tx_disable(struct ene_device *dev)
|
|
{
|
|
ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1);
|
|
dev->tx_buffer = NULL;
|
|
}
|
|
|
|
|
|
/* TX one sample - must be called with dev->hw_lock*/
|
|
static void ene_tx_sample(struct ene_device *dev)
|
|
{
|
|
u8 raw_tx;
|
|
u32 sample;
|
|
bool pulse = dev->tx_sample_pulse;
|
|
|
|
if (!dev->tx_buffer) {
|
|
pr_warn("TX: BUG: attempt to transmit NULL buffer\n");
|
|
return;
|
|
}
|
|
|
|
/* Grab next TX sample */
|
|
if (!dev->tx_sample) {
|
|
|
|
if (dev->tx_pos == dev->tx_len) {
|
|
if (!dev->tx_done) {
|
|
dbg("TX: no more data to send");
|
|
dev->tx_done = true;
|
|
goto exit;
|
|
} else {
|
|
dbg("TX: last sample sent by hardware");
|
|
ene_tx_disable(dev);
|
|
complete(&dev->tx_complete);
|
|
return;
|
|
}
|
|
}
|
|
|
|
sample = dev->tx_buffer[dev->tx_pos++];
|
|
dev->tx_sample_pulse = !dev->tx_sample_pulse;
|
|
|
|
dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period);
|
|
|
|
if (!dev->tx_sample)
|
|
dev->tx_sample = 1;
|
|
}
|
|
|
|
raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK);
|
|
dev->tx_sample -= raw_tx;
|
|
|
|
dbg("TX: sample %8d (%s)", raw_tx * sample_period,
|
|
pulse ? "pulse" : "space");
|
|
if (pulse)
|
|
raw_tx |= ENE_CIRRLC_OUT_PULSE;
|
|
|
|
ene_write_reg(dev,
|
|
dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx);
|
|
|
|
dev->tx_reg = !dev->tx_reg;
|
|
exit:
|
|
/* simulate TX done interrupt */
|
|
if (txsim)
|
|
mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
|
|
}
|
|
|
|
/* timer to simulate tx done interrupt */
|
|
static void ene_tx_irqsim(unsigned long data)
|
|
{
|
|
struct ene_device *dev = (struct ene_device *)data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
ene_tx_sample(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
}
|
|
|
|
|
|
/* read irq status and ack it */
|
|
static int ene_irq_status(struct ene_device *dev)
|
|
{
|
|
u8 irq_status;
|
|
u8 fw_flags1, fw_flags2;
|
|
int retval = 0;
|
|
|
|
fw_flags2 = ene_read_reg(dev, ENE_FW2);
|
|
|
|
if (dev->hw_revision < ENE_HW_C) {
|
|
irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS);
|
|
|
|
if (!(irq_status & ENEB_IRQ_STATUS_IR))
|
|
return 0;
|
|
|
|
ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR);
|
|
return ENE_IRQ_RX;
|
|
}
|
|
|
|
irq_status = ene_read_reg(dev, ENE_IRQ);
|
|
if (!(irq_status & ENE_IRQ_STATUS))
|
|
return 0;
|
|
|
|
/* original driver does that twice - a workaround ? */
|
|
ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
|
|
ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
|
|
|
|
/* check RX interrupt */
|
|
if (fw_flags2 & ENE_FW2_RXIRQ) {
|
|
retval |= ENE_IRQ_RX;
|
|
ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ);
|
|
}
|
|
|
|
/* check TX interrupt */
|
|
fw_flags1 = ene_read_reg(dev, ENE_FW1);
|
|
if (fw_flags1 & ENE_FW1_TXIRQ) {
|
|
ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
|
|
retval |= ENE_IRQ_TX;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* interrupt handler */
|
|
static irqreturn_t ene_isr(int irq, void *data)
|
|
{
|
|
u16 hw_value, reg;
|
|
int hw_sample, irq_status;
|
|
bool pulse;
|
|
unsigned long flags;
|
|
irqreturn_t retval = IRQ_NONE;
|
|
struct ene_device *dev = (struct ene_device *)data;
|
|
DEFINE_IR_RAW_EVENT(ev);
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
|
|
dbg_verbose("ISR called");
|
|
ene_rx_read_hw_pointer(dev);
|
|
irq_status = ene_irq_status(dev);
|
|
|
|
if (!irq_status)
|
|
goto unlock;
|
|
|
|
retval = IRQ_HANDLED;
|
|
|
|
if (irq_status & ENE_IRQ_TX) {
|
|
dbg_verbose("TX interrupt");
|
|
if (!dev->hw_learning_and_tx_capable) {
|
|
dbg("TX interrupt on unsupported device!");
|
|
goto unlock;
|
|
}
|
|
ene_tx_sample(dev);
|
|
}
|
|
|
|
if (!(irq_status & ENE_IRQ_RX))
|
|
goto unlock;
|
|
|
|
dbg_verbose("RX interrupt");
|
|
|
|
if (dev->hw_learning_and_tx_capable)
|
|
ene_rx_sense_carrier(dev);
|
|
|
|
/* On hardware that don't support extra buffer we need to trust
|
|
the interrupt and not track the read pointer */
|
|
if (!dev->hw_extra_buffer)
|
|
dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0;
|
|
|
|
while (1) {
|
|
|
|
reg = ene_rx_get_sample_reg(dev);
|
|
|
|
dbg_verbose("next sample to read at: %04x", reg);
|
|
if (!reg)
|
|
break;
|
|
|
|
hw_value = ene_read_reg(dev, reg);
|
|
|
|
if (dev->rx_fan_input_inuse) {
|
|
|
|
int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER;
|
|
|
|
/* read high part of the sample */
|
|
hw_value |= ene_read_reg(dev, reg + offset) << 8;
|
|
pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS;
|
|
|
|
/* clear space bit, and other unused bits */
|
|
hw_value &= ENE_FW_SMPL_BUF_FAN_MSK;
|
|
hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN;
|
|
|
|
} else {
|
|
pulse = !(hw_value & ENE_FW_SAMPLE_SPACE);
|
|
hw_value &= ~ENE_FW_SAMPLE_SPACE;
|
|
hw_sample = hw_value * sample_period;
|
|
|
|
if (dev->rx_period_adjust) {
|
|
hw_sample *= 100;
|
|
hw_sample /= (100 + dev->rx_period_adjust);
|
|
}
|
|
}
|
|
|
|
if (!dev->hw_extra_buffer && !hw_sample) {
|
|
dev->r_pointer = dev->w_pointer;
|
|
continue;
|
|
}
|
|
|
|
dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
|
|
|
|
ev.duration = US_TO_NS(hw_sample);
|
|
ev.pulse = pulse;
|
|
ir_raw_event_store_with_filter(dev->rdev, &ev);
|
|
}
|
|
|
|
ir_raw_event_handle(dev->rdev);
|
|
unlock:
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
/* Initialize default settings */
|
|
static void ene_setup_default_settings(struct ene_device *dev)
|
|
{
|
|
dev->tx_period = 32;
|
|
dev->tx_duty_cycle = 50; /*%*/
|
|
dev->transmitter_mask = 0x03;
|
|
dev->learning_mode_enabled = learning_mode_force;
|
|
|
|
/* Set reasonable default timeout */
|
|
dev->rdev->timeout = US_TO_NS(150000);
|
|
}
|
|
|
|
/* Upload all hardware settings at once. Used at load and resume time */
|
|
static void ene_setup_hw_settings(struct ene_device *dev)
|
|
{
|
|
if (dev->hw_learning_and_tx_capable) {
|
|
ene_tx_set_carrier(dev);
|
|
ene_tx_set_transmitters(dev);
|
|
}
|
|
|
|
ene_rx_setup(dev);
|
|
}
|
|
|
|
/* outside interface: called on first open*/
|
|
static int ene_open(struct rc_dev *rdev)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
ene_rx_enable(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* outside interface: called on device close*/
|
|
static void ene_close(struct rc_dev *rdev)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
|
|
ene_rx_disable(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
}
|
|
|
|
/* outside interface: set transmitter mask */
|
|
static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
dbg("TX: attempt to set transmitter mask %02x", tx_mask);
|
|
|
|
/* invalid txmask */
|
|
if (!tx_mask || tx_mask & ~0x03) {
|
|
dbg("TX: invalid mask");
|
|
/* return count of transmitters */
|
|
return 2;
|
|
}
|
|
|
|
dev->transmitter_mask = tx_mask;
|
|
ene_tx_set_transmitters(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* outside interface : set tx carrier */
|
|
static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
u32 period;
|
|
|
|
dbg("TX: attempt to set tx carrier to %d kHz", carrier);
|
|
if (carrier == 0)
|
|
return -EINVAL;
|
|
|
|
period = 2000000 / carrier;
|
|
if (period && (period > ENE_CIRMOD_PRD_MAX ||
|
|
period < ENE_CIRMOD_PRD_MIN)) {
|
|
|
|
dbg("TX: out of range %d-%d kHz carrier",
|
|
2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev->tx_period = period;
|
|
ene_tx_set_carrier(dev);
|
|
return 0;
|
|
}
|
|
|
|
/*outside interface : set tx duty cycle */
|
|
static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
dbg("TX: setting duty cycle to %d%%", duty_cycle);
|
|
dev->tx_duty_cycle = duty_cycle;
|
|
ene_tx_set_carrier(dev);
|
|
return 0;
|
|
}
|
|
|
|
/* outside interface: enable learning mode */
|
|
static int ene_set_learning_mode(struct rc_dev *rdev, int enable)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
unsigned long flags;
|
|
if (enable == dev->learning_mode_enabled)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
dev->learning_mode_enabled = enable;
|
|
ene_rx_disable(dev);
|
|
ene_rx_setup(dev);
|
|
ene_rx_enable(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int ene_set_carrier_report(struct rc_dev *rdev, int enable)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
unsigned long flags;
|
|
|
|
if (enable == dev->carrier_detect_enabled)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
dev->carrier_detect_enabled = enable;
|
|
ene_rx_disable(dev);
|
|
ene_rx_setup(dev);
|
|
ene_rx_enable(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* outside interface: enable or disable idle mode */
|
|
static void ene_set_idle(struct rc_dev *rdev, bool idle)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
|
|
if (idle) {
|
|
ene_rx_reset(dev);
|
|
dbg("RX: end of data");
|
|
}
|
|
}
|
|
|
|
/* outside interface: transmit */
|
|
static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n)
|
|
{
|
|
struct ene_device *dev = rdev->priv;
|
|
unsigned long flags;
|
|
|
|
dev->tx_buffer = buf;
|
|
dev->tx_len = n;
|
|
dev->tx_pos = 0;
|
|
dev->tx_reg = 0;
|
|
dev->tx_done = 0;
|
|
dev->tx_sample = 0;
|
|
dev->tx_sample_pulse = false;
|
|
|
|
dbg("TX: %d samples", dev->tx_len);
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
|
|
ene_tx_enable(dev);
|
|
|
|
/* Transmit first two samples */
|
|
ene_tx_sample(dev);
|
|
ene_tx_sample(dev);
|
|
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
|
|
if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
|
|
dbg("TX: timeout");
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
ene_tx_disable(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
} else
|
|
dbg("TX: done");
|
|
return n;
|
|
}
|
|
|
|
/* probe entry */
|
|
static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
|
|
{
|
|
int error = -ENOMEM;
|
|
struct rc_dev *rdev;
|
|
struct ene_device *dev;
|
|
|
|
/* allocate memory */
|
|
dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
|
|
rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!dev || !rdev)
|
|
goto exit_free_dev_rdev;
|
|
|
|
/* validate resources */
|
|
error = -ENODEV;
|
|
|
|
/* init these to -1, as 0 is valid for both */
|
|
dev->hw_io = -1;
|
|
dev->irq = -1;
|
|
|
|
if (!pnp_port_valid(pnp_dev, 0) ||
|
|
pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
|
|
goto exit_free_dev_rdev;
|
|
|
|
if (!pnp_irq_valid(pnp_dev, 0))
|
|
goto exit_free_dev_rdev;
|
|
|
|
spin_lock_init(&dev->hw_lock);
|
|
|
|
dev->hw_io = pnp_port_start(pnp_dev, 0);
|
|
dev->irq = pnp_irq(pnp_dev, 0);
|
|
|
|
|
|
pnp_set_drvdata(pnp_dev, dev);
|
|
dev->pnp_dev = pnp_dev;
|
|
|
|
/* don't allow too short/long sample periods */
|
|
if (sample_period < 5 || sample_period > 0x7F)
|
|
sample_period = ENE_DEFAULT_SAMPLE_PERIOD;
|
|
|
|
/* detect hardware version and features */
|
|
error = ene_hw_detect(dev);
|
|
if (error)
|
|
goto exit_free_dev_rdev;
|
|
|
|
if (!dev->hw_learning_and_tx_capable && txsim) {
|
|
dev->hw_learning_and_tx_capable = true;
|
|
setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
|
|
(long unsigned int)dev);
|
|
pr_warn("Simulation of TX activated\n");
|
|
}
|
|
|
|
if (!dev->hw_learning_and_tx_capable)
|
|
learning_mode_force = false;
|
|
|
|
rdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
|
|
rdev->priv = dev;
|
|
rdev->open = ene_open;
|
|
rdev->close = ene_close;
|
|
rdev->s_idle = ene_set_idle;
|
|
rdev->driver_name = ENE_DRIVER_NAME;
|
|
rdev->map_name = RC_MAP_RC6_MCE;
|
|
rdev->input_name = "ENE eHome Infrared Remote Receiver";
|
|
|
|
if (dev->hw_learning_and_tx_capable) {
|
|
rdev->s_learning_mode = ene_set_learning_mode;
|
|
init_completion(&dev->tx_complete);
|
|
rdev->tx_ir = ene_transmit;
|
|
rdev->s_tx_mask = ene_set_tx_mask;
|
|
rdev->s_tx_carrier = ene_set_tx_carrier;
|
|
rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle;
|
|
rdev->s_carrier_report = ene_set_carrier_report;
|
|
rdev->input_name = "ENE eHome Infrared Remote Transceiver";
|
|
}
|
|
|
|
dev->rdev = rdev;
|
|
|
|
ene_rx_setup_hw_buffer(dev);
|
|
ene_setup_default_settings(dev);
|
|
ene_setup_hw_settings(dev);
|
|
|
|
device_set_wakeup_capable(&pnp_dev->dev, true);
|
|
device_set_wakeup_enable(&pnp_dev->dev, true);
|
|
|
|
error = rc_register_device(rdev);
|
|
if (error < 0)
|
|
goto exit_free_dev_rdev;
|
|
|
|
/* claim the resources */
|
|
error = -EBUSY;
|
|
if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
|
|
goto exit_unregister_device;
|
|
}
|
|
|
|
if (request_irq(dev->irq, ene_isr,
|
|
IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
|
|
goto exit_release_hw_io;
|
|
}
|
|
|
|
pr_notice("driver has been successfully loaded\n");
|
|
return 0;
|
|
|
|
exit_release_hw_io:
|
|
release_region(dev->hw_io, ENE_IO_SIZE);
|
|
exit_unregister_device:
|
|
rc_unregister_device(rdev);
|
|
rdev = NULL;
|
|
exit_free_dev_rdev:
|
|
rc_free_device(rdev);
|
|
kfree(dev);
|
|
return error;
|
|
}
|
|
|
|
/* main unload function */
|
|
static void ene_remove(struct pnp_dev *pnp_dev)
|
|
{
|
|
struct ene_device *dev = pnp_get_drvdata(pnp_dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->hw_lock, flags);
|
|
ene_rx_disable(dev);
|
|
ene_rx_restore_hw_buffer(dev);
|
|
spin_unlock_irqrestore(&dev->hw_lock, flags);
|
|
|
|
free_irq(dev->irq, dev);
|
|
release_region(dev->hw_io, ENE_IO_SIZE);
|
|
rc_unregister_device(dev->rdev);
|
|
kfree(dev);
|
|
}
|
|
|
|
/* enable wake on IR (wakes on specific button on original remote) */
|
|
static void ene_enable_wake(struct ene_device *dev, bool enable)
|
|
{
|
|
dbg("wake on IR %s", enable ? "enabled" : "disabled");
|
|
ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
|
|
{
|
|
struct ene_device *dev = pnp_get_drvdata(pnp_dev);
|
|
bool wake = device_may_wakeup(&dev->pnp_dev->dev);
|
|
|
|
if (!wake && dev->rx_enabled)
|
|
ene_rx_disable_hw(dev);
|
|
|
|
ene_enable_wake(dev, wake);
|
|
return 0;
|
|
}
|
|
|
|
static int ene_resume(struct pnp_dev *pnp_dev)
|
|
{
|
|
struct ene_device *dev = pnp_get_drvdata(pnp_dev);
|
|
ene_setup_hw_settings(dev);
|
|
|
|
if (dev->rx_enabled)
|
|
ene_rx_enable(dev);
|
|
|
|
ene_enable_wake(dev, false);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void ene_shutdown(struct pnp_dev *pnp_dev)
|
|
{
|
|
struct ene_device *dev = pnp_get_drvdata(pnp_dev);
|
|
ene_enable_wake(dev, true);
|
|
}
|
|
|
|
static const struct pnp_device_id ene_ids[] = {
|
|
{.id = "ENE0100",},
|
|
{.id = "ENE0200",},
|
|
{.id = "ENE0201",},
|
|
{.id = "ENE0202",},
|
|
{},
|
|
};
|
|
|
|
static struct pnp_driver ene_driver = {
|
|
.name = ENE_DRIVER_NAME,
|
|
.id_table = ene_ids,
|
|
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
|
|
|
|
.probe = ene_probe,
|
|
.remove = ene_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ene_suspend,
|
|
.resume = ene_resume,
|
|
#endif
|
|
.shutdown = ene_shutdown,
|
|
};
|
|
|
|
module_param(sample_period, int, S_IRUGO);
|
|
MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
|
|
|
|
module_param(learning_mode_force, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default");
|
|
|
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug level");
|
|
|
|
module_param(txsim, bool, S_IRUGO);
|
|
MODULE_PARM_DESC(txsim,
|
|
"Simulate TX features on unsupported hardware (dangerous)");
|
|
|
|
MODULE_DEVICE_TABLE(pnp, ene_ids);
|
|
MODULE_DESCRIPTION
|
|
("Infrared input driver for KB3926B/C/D/E/F (aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
|
|
|
|
MODULE_AUTHOR("Maxim Levitsky");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_pnp_driver(ene_driver);
|