alistair23-linux/drivers/pci/msi.c
Linus Torvalds 3c87b79188 PCI changes for the v4.4 merge window:
Resource management
     Add support for Enhanced Allocation devices (Sean O. Stalley)
     Add Enhanced Allocation register entries (Sean O. Stalley)
     Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
     Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
     Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
     Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
     Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
     Expand Enhanced Allocation BAR output (Bjorn Helgaas)
     Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Add sparc mem64 resource parsing for root bus (Yinghai Lu)
 
   PCI device hotplug
     pciehp: Queue power work requests in dedicated function (Guenter Roeck)
 
   Driver binding
     Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
 
   Virtualization
     Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
     Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
     Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
     Reorder pcibios_sriov_disable() (Alexander Duyck)
     Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
     Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
     Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
     Don't try to restore VF BARs (Wei Yang)
 
   MSI
     Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
     Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
     Export all remapped MSIs to sysfs attributes (Romain Bezut)
     Disable MSI on SiS 761 (Ondrej Zary)
 
   AER
     Clear error status registers during enumeration and restore (Taku Izumi)
 
   Generic host bridge driver
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Allow multiple hosts with different map_bus() methods (David Daney)
     Pass starting bus number to pci_scan_root_bus() (David Daney)
     Fix address window calculation for non-zero starting bus (David Daney)
 
   Altera host bridge driver
     Add msi.h to ARM Kbuild (Ley Foon Tan)
     Add Altera PCIe host controller driver (Ley Foon Tan)
     Add Altera PCIe MSI driver (Ley Foon Tan)
 
   APM X-Gene host bridge driver
     Remove msi_controller assignment (Duc Dang)
 
   Broadcom iProc host bridge driver
     Fix header comment "Corporation" misspelling (Florian Fainelli)
     Fix code comment to match code (Ray Jui)
     Remove unused struct iproc_pcie.irqs[] (Ray Jui)
     Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
     Fix PCIe reset logic (Ray Jui)
     Improve link detection logic (Ray Jui)
     Update PCIe device tree bindings (Ray Jui)
     Add outbound mapping support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Return real error code from imx6_add_pcie_port() (Fabio Estevam)
     Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
 
   Freescale Layerscape host bridge driver
     Remove ls_pcie_establish_link() (Minghuan Lian)
     Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
     Factor out SCFG related function (Minghuan Lian)
     Update ls_add_pcie_port() (Minghuan Lian)
     Remove unused fields from struct ls_pcie (Minghuan Lian)
     Add support for LS1043a and LS2080a (Minghuan Lian)
     Add ls_pcie_msi_host_init() (Minghuan Lian)
 
   HiSilicon host bridge driver
     Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
 
   Marvell MVEBU host bridge driver
     Return zero for reserved or unimplemented config space (Russell King)
     Use exact config access size; don't read/modify/write (Russell King)
     Use of_get_available_child_count() (Russell King)
     Use for_each_available_child_of_node() to walk child nodes (Russell King)
     Report full node name when reporting a DT error (Russell King)
     Use port->name rather than "PCIe%d.%d" (Russell King)
     Move port parsing and resource claiming to  separate function (Russell King)
     Fix memory leaks and refcount leaks (Russell King)
     Split port parsing and resource claiming from  port setup (Russell King)
     Use gpio_set_value_cansleep() (Russell King)
     Use devm_kcalloc() to allocate an array (Russell King)
     Use gpio_desc to carry around gpio (Russell King)
     Improve clock/reset handling (Russell King)
     Add PCI Express root complex capability block (Russell King)
     Remove code restricting accesses to slot 0 (Russell King)
 
   NVIDIA Tegra host bridge driver
     Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
 
   Renesas R-Car host bridge driver
     Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
     Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
     Make PCI aware of the I/O resources (Phil Edworthy)
     Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
     Set root bus nr to that provided in DT (Phil Edworthy)
     Fix I/O offset for multiple host bridges (Phil Edworthy)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
 
   Synopsys DesignWare host bridge driver
     Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
     Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
     Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
     Require config accesses to be naturally aligned (Gabriele Paoloni)
     Make "num-lanes" an optional DT property (Gabriele Paoloni)
     Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
     Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
     Factor out MSI msg setup (Lucas Stach)
     Implement multivector MSI IRQ setup (Lucas Stach)
     Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
     Set up high part of MSI target address (Lucas Stach)
     Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
     Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
     Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
     Make driver arch-agnostic (Zhou Wang)
 
   Miscellaneous
     Make x86 pci_subsys_init() static (Alexander Kuleshov)
     Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPM9aAAoJEFmIoMA60/r89f8QALFMHegqKk5M08ZcCaG7unLF
 5U5t88y6KF/kNYF6HOqLQiHh79U3ToU5HdrNaAtutr0UnvgbFC2WulLqKYgLiq6Y
 YJnwR3EfgGmdG7DKAVAXq19+nc2hgTPAEe8sciU7HKlTbqQmGj6//y3sQULGNLx3
 zur0C33DCtrDgKDP7to273lkHO8Vl0YuLzyqwt0ePCMNcXR0h1dK8QxSTjuXBxaR
 c+T1V1Hw64MTxLz3xJd1/1ipy32u+9LnqqcdRz0zRq6qi48G9ch/i4Z6DHa8kTbj
 DUZrrTYKILQ2TcjcZSBmTueX11Z1Xa4/I/45sehIi6gVWL9qQbmGpt2E5YtFED+4
 GdcmBSbWG/qsNsabXk38uiM3ww7+ltXEOhTXbcK+EgjvIhE6gSK/plYG0fU9pybs
 AKViEXVdHoT1X0N1dLK12mq7kvDCQvShHn08lz97Q9YrZ32wv1Fnij6WVSbJvfWt
 DubtPtisVM+rVy+VTpOImNR9wO54lTmG5jK53yNqH7I20K89y1kqARlN9nMXMB1a
 2nQnwe9yWlsGj9gVNCn1KmyQSPOWjg+3Z+ekfwbxpca14s1AaN3Jm0N9Z61dXFoF
 y2ygoQtZ/z9BHr3quBpxXGt+aVUg2kcNw5GYeDYiALxXdJSObyzRrZ6HDb/zicU2
 ZH9hBj0ctXvucmy6I2mt
 =uZrt
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Resource management:
   - Add support for Enhanced Allocation devices (Sean O. Stalley)
   - Add Enhanced Allocation register entries (Sean O. Stalley)
   - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
   - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
   - Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
   - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
   - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
   - Expand Enhanced Allocation BAR output (Bjorn Helgaas)
   - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Add sparc mem64 resource parsing for root bus (Yinghai Lu)

  PCI device hotplug:
   - pciehp: Queue power work requests in dedicated function (Guenter Roeck)

  Driver binding:
   - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)

  Virtualization:
   - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
   - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
   - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
   - Reorder pcibios_sriov_disable() (Alexander Duyck)
   - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
   - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
   - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
   - Don't try to restore VF BARs (Wei Yang)

  MSI:
   - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
   - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
   - Export all remapped MSIs to sysfs attributes (Romain Bezut)
   - Disable MSI on SiS 761 (Ondrej Zary)

  AER:
   - Clear error status registers during enumeration and restore (Taku Izumi)

  Generic host bridge driver:
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Allow multiple hosts with different map_bus() methods (David Daney)
   - Pass starting bus number to pci_scan_root_bus() (David Daney)
   - Fix address window calculation for non-zero starting bus (David Daney)

  Altera host bridge driver:
   - Add msi.h to ARM Kbuild (Ley Foon Tan)
   - Add Altera PCIe host controller driver (Ley Foon Tan)
   - Add Altera PCIe MSI driver (Ley Foon Tan)

  APM X-Gene host bridge driver:
   - Remove msi_controller assignment (Duc Dang)

  Broadcom iProc host bridge driver:
   - Fix header comment "Corporation" misspelling (Florian Fainelli)
   - Fix code comment to match code (Ray Jui)
   - Remove unused struct iproc_pcie.irqs[] (Ray Jui)
   - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
   - Fix PCIe reset logic (Ray Jui)
   - Improve link detection logic (Ray Jui)
   - Update PCIe device tree bindings (Ray Jui)
   - Add outbound mapping support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Return real error code from imx6_add_pcie_port() (Fabio Estevam)
   - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)

  Freescale Layerscape host bridge driver:
   - Remove ls_pcie_establish_link() (Minghuan Lian)
   - Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
   - Factor out SCFG related function (Minghuan Lian)
   - Update ls_add_pcie_port() (Minghuan Lian)
   - Remove unused fields from struct ls_pcie (Minghuan Lian)
   - Add support for LS1043a and LS2080a (Minghuan Lian)
   - Add ls_pcie_msi_host_init() (Minghuan Lian)

  HiSilicon host bridge driver:
   - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)

  Marvell MVEBU host bridge driver:
   - Return zero for reserved or unimplemented config space (Russell King)
   - Use exact config access size; don't read/modify/write (Russell King)
   - Use of_get_available_child_count() (Russell King)
   - Use for_each_available_child_of_node() to walk child nodes (Russell King)
   - Report full node name when reporting a DT error (Russell King)
   - Use port->name rather than "PCIe%d.%d" (Russell King)
   - Move port parsing and resource claiming to  separate function (Russell King)
   - Fix memory leaks and refcount leaks (Russell King)
   - Split port parsing and resource claiming from  port setup (Russell King)
   - Use gpio_set_value_cansleep() (Russell King)
   - Use devm_kcalloc() to allocate an array (Russell King)
   - Use gpio_desc to carry around gpio (Russell King)
   - Improve clock/reset handling (Russell King)
   - Add PCI Express root complex capability block (Russell King)
   - Remove code restricting accesses to slot 0 (Russell King)

  NVIDIA Tegra host bridge driver:
   - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)

  Renesas R-Car host bridge driver:
   - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
   - Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
   - Make PCI aware of the I/O resources (Phil Edworthy)
   - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
   - Set root bus nr to that provided in DT (Phil Edworthy)
   - Fix I/O offset for multiple host bridges (Phil Edworthy)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)

  Synopsys DesignWare host bridge driver:
   - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
   - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
   - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
   - Require config accesses to be naturally aligned (Gabriele Paoloni)
   - Make "num-lanes" an optional DT property (Gabriele Paoloni)
   - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
   - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
   - Factor out MSI msg setup (Lucas Stach)
   - Implement multivector MSI IRQ setup (Lucas Stach)
   - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
   - Set up high part of MSI target address (Lucas Stach)
   - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
   - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
   - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
   - Make driver arch-agnostic (Zhou Wang)

  Miscellaneous:
   - Make x86 pci_subsys_init() static (Alexander Kuleshov)
   - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"

* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: altera: Add Altera PCIe MSI driver
  PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  ...
2015-11-06 11:29:53 -08:00

1390 lines
35 KiB
C

/*
* File: msi.c
* Purpose: PCI Message Signaled Interrupt (MSI)
*
* Copyright (C) 2003-2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
#include <linux/err.h>
#include <linux/mm.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/export.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/msi.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/irqdomain.h>
#include <linux/of_irq.h>
#include "pci.h"
static int pci_msi_enable = 1;
int pci_msi_ignore_mask;
#define msix_table_size(flags) ((flags & PCI_MSIX_FLAGS_QSIZE) + 1)
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
static struct irq_domain *pci_msi_default_domain;
static DEFINE_MUTEX(pci_msi_domain_lock);
struct irq_domain * __weak arch_get_pci_msi_domain(struct pci_dev *dev)
{
return pci_msi_default_domain;
}
static struct irq_domain *pci_msi_get_domain(struct pci_dev *dev)
{
struct irq_domain *domain;
domain = dev_get_msi_domain(&dev->dev);
if (domain)
return domain;
return arch_get_pci_msi_domain(dev);
}
static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
struct irq_domain *domain;
domain = pci_msi_get_domain(dev);
if (domain)
return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
return arch_setup_msi_irqs(dev, nvec, type);
}
static void pci_msi_teardown_msi_irqs(struct pci_dev *dev)
{
struct irq_domain *domain;
domain = pci_msi_get_domain(dev);
if (domain)
pci_msi_domain_free_irqs(domain, dev);
else
arch_teardown_msi_irqs(dev);
}
#else
#define pci_msi_setup_msi_irqs arch_setup_msi_irqs
#define pci_msi_teardown_msi_irqs arch_teardown_msi_irqs
#endif
/* Arch hooks */
int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_controller *chip = dev->bus->msi;
int err;
if (!chip || !chip->setup_irq)
return -EINVAL;
err = chip->setup_irq(chip, dev, desc);
if (err < 0)
return err;
irq_set_chip_data(desc->irq, chip);
return 0;
}
void __weak arch_teardown_msi_irq(unsigned int irq)
{
struct msi_controller *chip = irq_get_chip_data(irq);
if (!chip || !chip->teardown_irq)
return;
chip->teardown_irq(chip, irq);
}
int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
struct msi_controller *chip = dev->bus->msi;
struct msi_desc *entry;
int ret;
if (chip && chip->setup_irqs)
return chip->setup_irqs(chip, dev, nvec, type);
/*
* If an architecture wants to support multiple MSI, it needs to
* override arch_setup_msi_irqs()
*/
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
for_each_pci_msi_entry(entry, dev) {
ret = arch_setup_msi_irq(dev, entry);
if (ret < 0)
return ret;
if (ret > 0)
return -ENOSPC;
}
return 0;
}
/*
* We have a default implementation available as a separate non-weak
* function, as it is used by the Xen x86 PCI code
*/
void default_teardown_msi_irqs(struct pci_dev *dev)
{
int i;
struct msi_desc *entry;
for_each_pci_msi_entry(entry, dev)
if (entry->irq)
for (i = 0; i < entry->nvec_used; i++)
arch_teardown_msi_irq(entry->irq + i);
}
void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
{
return default_teardown_msi_irqs(dev);
}
static void default_restore_msi_irq(struct pci_dev *dev, int irq)
{
struct msi_desc *entry;
entry = NULL;
if (dev->msix_enabled) {
for_each_pci_msi_entry(entry, dev) {
if (irq == entry->irq)
break;
}
} else if (dev->msi_enabled) {
entry = irq_get_msi_desc(irq);
}
if (entry)
__pci_write_msi_msg(entry, &entry->msg);
}
void __weak arch_restore_msi_irqs(struct pci_dev *dev)
{
return default_restore_msi_irqs(dev);
}
static inline __attribute_const__ u32 msi_mask(unsigned x)
{
/* Don't shift by >= width of type */
if (x >= 5)
return 0xffffffff;
return (1 << (1 << x)) - 1;
}
/*
* PCI 2.3 does not specify mask bits for each MSI interrupt. Attempting to
* mask all MSI interrupts by clearing the MSI enable bit does not work
* reliably as devices without an INTx disable bit will then generate a
* level IRQ which will never be cleared.
*/
u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
u32 mask_bits = desc->masked;
if (pci_msi_ignore_mask || !desc->msi_attrib.maskbit)
return 0;
mask_bits &= ~mask;
mask_bits |= flag;
pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->mask_pos,
mask_bits);
return mask_bits;
}
static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag);
}
/*
* This internal function does not flush PCI writes to the device.
* All users must ensure that they read from the device before either
* assuming that the device state is up to date, or returning out of this
* file. This saves a few milliseconds when initialising devices with lots
* of MSI-X interrupts.
*/
u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag)
{
u32 mask_bits = desc->masked;
unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_VECTOR_CTRL;
if (pci_msi_ignore_mask)
return 0;
mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
if (flag)
mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT;
writel(mask_bits, desc->mask_base + offset);
return mask_bits;
}
static void msix_mask_irq(struct msi_desc *desc, u32 flag)
{
desc->masked = __pci_msix_desc_mask_irq(desc, flag);
}
static void msi_set_mask_bit(struct irq_data *data, u32 flag)
{
struct msi_desc *desc = irq_data_get_msi_desc(data);
if (desc->msi_attrib.is_msix) {
msix_mask_irq(desc, flag);
readl(desc->mask_base); /* Flush write to device */
} else {
unsigned offset = data->irq - desc->irq;
msi_mask_irq(desc, 1 << offset, flag << offset);
}
}
/**
* pci_msi_mask_irq - Generic irq chip callback to mask PCI/MSI interrupts
* @data: pointer to irqdata associated to that interrupt
*/
void pci_msi_mask_irq(struct irq_data *data)
{
msi_set_mask_bit(data, 1);
}
/**
* pci_msi_unmask_irq - Generic irq chip callback to unmask PCI/MSI interrupts
* @data: pointer to irqdata associated to that interrupt
*/
void pci_msi_unmask_irq(struct irq_data *data)
{
msi_set_mask_bit(data, 0);
}
void default_restore_msi_irqs(struct pci_dev *dev)
{
struct msi_desc *entry;
for_each_pci_msi_entry(entry, dev)
default_restore_msi_irq(dev, entry->irq);
}
void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
{
struct pci_dev *dev = msi_desc_to_pci_dev(entry);
BUG_ON(dev->current_state != PCI_D0);
if (entry->msi_attrib.is_msix) {
void __iomem *base = entry->mask_base +
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR);
msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR);
msg->data = readl(base + PCI_MSIX_ENTRY_DATA);
} else {
int pos = dev->msi_cap;
u16 data;
pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_LO,
&msg->address_lo);
if (entry->msi_attrib.is_64) {
pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_HI,
&msg->address_hi);
pci_read_config_word(dev, pos + PCI_MSI_DATA_64, &data);
} else {
msg->address_hi = 0;
pci_read_config_word(dev, pos + PCI_MSI_DATA_32, &data);
}
msg->data = data;
}
}
void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
{
struct pci_dev *dev = msi_desc_to_pci_dev(entry);
if (dev->current_state != PCI_D0) {
/* Don't touch the hardware now */
} else if (entry->msi_attrib.is_msix) {
void __iomem *base;
base = entry->mask_base +
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR);
writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR);
writel(msg->data, base + PCI_MSIX_ENTRY_DATA);
} else {
int pos = dev->msi_cap;
u16 msgctl;
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
msgctl &= ~PCI_MSI_FLAGS_QSIZE;
msgctl |= entry->msi_attrib.multiple << 4;
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, msgctl);
pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO,
msg->address_lo);
if (entry->msi_attrib.is_64) {
pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI,
msg->address_hi);
pci_write_config_word(dev, pos + PCI_MSI_DATA_64,
msg->data);
} else {
pci_write_config_word(dev, pos + PCI_MSI_DATA_32,
msg->data);
}
}
entry->msg = *msg;
}
void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg)
{
struct msi_desc *entry = irq_get_msi_desc(irq);
__pci_write_msi_msg(entry, msg);
}
EXPORT_SYMBOL_GPL(pci_write_msi_msg);
static void free_msi_irqs(struct pci_dev *dev)
{
struct list_head *msi_list = dev_to_msi_list(&dev->dev);
struct msi_desc *entry, *tmp;
struct attribute **msi_attrs;
struct device_attribute *dev_attr;
int i, count = 0;
for_each_pci_msi_entry(entry, dev)
if (entry->irq)
for (i = 0; i < entry->nvec_used; i++)
BUG_ON(irq_has_action(entry->irq + i));
pci_msi_teardown_msi_irqs(dev);
list_for_each_entry_safe(entry, tmp, msi_list, list) {
if (entry->msi_attrib.is_msix) {
if (list_is_last(&entry->list, msi_list))
iounmap(entry->mask_base);
}
list_del(&entry->list);
kfree(entry);
}
if (dev->msi_irq_groups) {
sysfs_remove_groups(&dev->dev.kobj, dev->msi_irq_groups);
msi_attrs = dev->msi_irq_groups[0]->attrs;
while (msi_attrs[count]) {
dev_attr = container_of(msi_attrs[count],
struct device_attribute, attr);
kfree(dev_attr->attr.name);
kfree(dev_attr);
++count;
}
kfree(msi_attrs);
kfree(dev->msi_irq_groups[0]);
kfree(dev->msi_irq_groups);
dev->msi_irq_groups = NULL;
}
}
static void pci_intx_for_msi(struct pci_dev *dev, int enable)
{
if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG))
pci_intx(dev, enable);
}
static void __pci_restore_msi_state(struct pci_dev *dev)
{
u16 control;
struct msi_desc *entry;
if (!dev->msi_enabled)
return;
entry = irq_get_msi_desc(dev->irq);
pci_intx_for_msi(dev, 0);
pci_msi_set_enable(dev, 0);
arch_restore_msi_irqs(dev);
pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
entry->masked);
control &= ~PCI_MSI_FLAGS_QSIZE;
control |= (entry->msi_attrib.multiple << 4) | PCI_MSI_FLAGS_ENABLE;
pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control);
}
static void __pci_restore_msix_state(struct pci_dev *dev)
{
struct msi_desc *entry;
if (!dev->msix_enabled)
return;
BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));
/* route the table */
pci_intx_for_msi(dev, 0);
pci_msix_clear_and_set_ctrl(dev, 0,
PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
arch_restore_msi_irqs(dev);
for_each_pci_msi_entry(entry, dev)
msix_mask_irq(entry, entry->masked);
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
}
void pci_restore_msi_state(struct pci_dev *dev)
{
__pci_restore_msi_state(dev);
__pci_restore_msix_state(dev);
}
EXPORT_SYMBOL_GPL(pci_restore_msi_state);
static ssize_t msi_mode_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct msi_desc *entry;
unsigned long irq;
int retval;
retval = kstrtoul(attr->attr.name, 10, &irq);
if (retval)
return retval;
entry = irq_get_msi_desc(irq);
if (entry)
return sprintf(buf, "%s\n",
entry->msi_attrib.is_msix ? "msix" : "msi");
return -ENODEV;
}
static int populate_msi_sysfs(struct pci_dev *pdev)
{
struct attribute **msi_attrs;
struct attribute *msi_attr;
struct device_attribute *msi_dev_attr;
struct attribute_group *msi_irq_group;
const struct attribute_group **msi_irq_groups;
struct msi_desc *entry;
int ret = -ENOMEM;
int num_msi = 0;
int count = 0;
int i;
/* Determine how many msi entries we have */
for_each_pci_msi_entry(entry, pdev)
num_msi += entry->nvec_used;
if (!num_msi)
return 0;
/* Dynamically create the MSI attributes for the PCI device */
msi_attrs = kzalloc(sizeof(void *) * (num_msi + 1), GFP_KERNEL);
if (!msi_attrs)
return -ENOMEM;
for_each_pci_msi_entry(entry, pdev) {
for (i = 0; i < entry->nvec_used; i++) {
msi_dev_attr = kzalloc(sizeof(*msi_dev_attr), GFP_KERNEL);
if (!msi_dev_attr)
goto error_attrs;
msi_attrs[count] = &msi_dev_attr->attr;
sysfs_attr_init(&msi_dev_attr->attr);
msi_dev_attr->attr.name = kasprintf(GFP_KERNEL, "%d",
entry->irq + i);
if (!msi_dev_attr->attr.name)
goto error_attrs;
msi_dev_attr->attr.mode = S_IRUGO;
msi_dev_attr->show = msi_mode_show;
++count;
}
}
msi_irq_group = kzalloc(sizeof(*msi_irq_group), GFP_KERNEL);
if (!msi_irq_group)
goto error_attrs;
msi_irq_group->name = "msi_irqs";
msi_irq_group->attrs = msi_attrs;
msi_irq_groups = kzalloc(sizeof(void *) * 2, GFP_KERNEL);
if (!msi_irq_groups)
goto error_irq_group;
msi_irq_groups[0] = msi_irq_group;
ret = sysfs_create_groups(&pdev->dev.kobj, msi_irq_groups);
if (ret)
goto error_irq_groups;
pdev->msi_irq_groups = msi_irq_groups;
return 0;
error_irq_groups:
kfree(msi_irq_groups);
error_irq_group:
kfree(msi_irq_group);
error_attrs:
count = 0;
msi_attr = msi_attrs[count];
while (msi_attr) {
msi_dev_attr = container_of(msi_attr, struct device_attribute, attr);
kfree(msi_attr->name);
kfree(msi_dev_attr);
++count;
msi_attr = msi_attrs[count];
}
kfree(msi_attrs);
return ret;
}
static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec)
{
u16 control;
struct msi_desc *entry;
/* MSI Entry Initialization */
entry = alloc_msi_entry(&dev->dev);
if (!entry)
return NULL;
pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
entry->msi_attrib.is_msix = 0;
entry->msi_attrib.is_64 = !!(control & PCI_MSI_FLAGS_64BIT);
entry->msi_attrib.entry_nr = 0;
entry->msi_attrib.maskbit = !!(control & PCI_MSI_FLAGS_MASKBIT);
entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */
entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
entry->nvec_used = nvec;
if (control & PCI_MSI_FLAGS_64BIT)
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
else
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
/* Save the initial mask status */
if (entry->msi_attrib.maskbit)
pci_read_config_dword(dev, entry->mask_pos, &entry->masked);
return entry;
}
static int msi_verify_entries(struct pci_dev *dev)
{
struct msi_desc *entry;
for_each_pci_msi_entry(entry, dev) {
if (!dev->no_64bit_msi || !entry->msg.address_hi)
continue;
dev_err(&dev->dev, "Device has broken 64-bit MSI but arch"
" tried to assign one above 4G\n");
return -EIO;
}
return 0;
}
/**
* msi_capability_init - configure device's MSI capability structure
* @dev: pointer to the pci_dev data structure of MSI device function
* @nvec: number of interrupts to allocate
*
* Setup the MSI capability structure of the device with the requested
* number of interrupts. A return value of zero indicates the successful
* setup of an entry with the new MSI irq. A negative return value indicates
* an error, and a positive return value indicates the number of interrupts
* which could have been allocated.
*/
static int msi_capability_init(struct pci_dev *dev, int nvec)
{
struct msi_desc *entry;
int ret;
unsigned mask;
pci_msi_set_enable(dev, 0); /* Disable MSI during set up */
entry = msi_setup_entry(dev, nvec);
if (!entry)
return -ENOMEM;
/* All MSIs are unmasked by default, Mask them all */
mask = msi_mask(entry->msi_attrib.multi_cap);
msi_mask_irq(entry, mask, mask);
list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
/* Configure MSI capability structure */
ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
if (ret) {
msi_mask_irq(entry, mask, ~mask);
free_msi_irqs(dev);
return ret;
}
ret = msi_verify_entries(dev);
if (ret) {
msi_mask_irq(entry, mask, ~mask);
free_msi_irqs(dev);
return ret;
}
ret = populate_msi_sysfs(dev);
if (ret) {
msi_mask_irq(entry, mask, ~mask);
free_msi_irqs(dev);
return ret;
}
/* Set MSI enabled bits */
pci_intx_for_msi(dev, 0);
pci_msi_set_enable(dev, 1);
dev->msi_enabled = 1;
pcibios_free_irq(dev);
dev->irq = entry->irq;
return 0;
}
static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries)
{
resource_size_t phys_addr;
u32 table_offset;
unsigned long flags;
u8 bir;
pci_read_config_dword(dev, dev->msix_cap + PCI_MSIX_TABLE,
&table_offset);
bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR);
flags = pci_resource_flags(dev, bir);
if (!flags || (flags & IORESOURCE_UNSET))
return NULL;
table_offset &= PCI_MSIX_TABLE_OFFSET;
phys_addr = pci_resource_start(dev, bir) + table_offset;
return ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE);
}
static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
struct msix_entry *entries, int nvec)
{
struct msi_desc *entry;
int i;
for (i = 0; i < nvec; i++) {
entry = alloc_msi_entry(&dev->dev);
if (!entry) {
if (!i)
iounmap(base);
else
free_msi_irqs(dev);
/* No enough memory. Don't try again */
return -ENOMEM;
}
entry->msi_attrib.is_msix = 1;
entry->msi_attrib.is_64 = 1;
entry->msi_attrib.entry_nr = entries[i].entry;
entry->msi_attrib.default_irq = dev->irq;
entry->mask_base = base;
entry->nvec_used = 1;
list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
}
return 0;
}
static void msix_program_entries(struct pci_dev *dev,
struct msix_entry *entries)
{
struct msi_desc *entry;
int i = 0;
for_each_pci_msi_entry(entry, dev) {
int offset = entries[i].entry * PCI_MSIX_ENTRY_SIZE +
PCI_MSIX_ENTRY_VECTOR_CTRL;
entries[i].vector = entry->irq;
entry->masked = readl(entry->mask_base + offset);
msix_mask_irq(entry, 1);
i++;
}
}
/**
* msix_capability_init - configure device's MSI-X capability
* @dev: pointer to the pci_dev data structure of MSI-X device function
* @entries: pointer to an array of struct msix_entry entries
* @nvec: number of @entries
*
* Setup the MSI-X capability structure of device function with a
* single MSI-X irq. A return of zero indicates the successful setup of
* requested MSI-X entries with allocated irqs or non-zero for otherwise.
**/
static int msix_capability_init(struct pci_dev *dev,
struct msix_entry *entries, int nvec)
{
int ret;
u16 control;
void __iomem *base;
/* Ensure MSI-X is disabled while it is set up */
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
/* Request & Map MSI-X table region */
base = msix_map_region(dev, msix_table_size(control));
if (!base)
return -ENOMEM;
ret = msix_setup_entries(dev, base, entries, nvec);
if (ret)
return ret;
ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
goto out_avail;
/* Check if all MSI entries honor device restrictions */
ret = msi_verify_entries(dev);
if (ret)
goto out_free;
/*
* Some devices require MSI-X to be enabled before we can touch the
* MSI-X registers. We need to mask all the vectors to prevent
* interrupts coming in before they're fully set up.
*/
pci_msix_clear_and_set_ctrl(dev, 0,
PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE);
msix_program_entries(dev, entries);
ret = populate_msi_sysfs(dev);
if (ret)
goto out_free;
/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
dev->msix_enabled = 1;
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
pcibios_free_irq(dev);
return 0;
out_avail:
if (ret < 0) {
/*
* If we had some success, report the number of irqs
* we succeeded in setting up.
*/
struct msi_desc *entry;
int avail = 0;
for_each_pci_msi_entry(entry, dev) {
if (entry->irq != 0)
avail++;
}
if (avail != 0)
ret = avail;
}
out_free:
free_msi_irqs(dev);
return ret;
}
/**
* pci_msi_supported - check whether MSI may be enabled on a device
* @dev: pointer to the pci_dev data structure of MSI device function
* @nvec: how many MSIs have been requested ?
*
* Look at global flags, the device itself, and its parent buses
* to determine if MSI/-X are supported for the device. If MSI/-X is
* supported return 1, else return 0.
**/
static int pci_msi_supported(struct pci_dev *dev, int nvec)
{
struct pci_bus *bus;
/* MSI must be globally enabled and supported by the device */
if (!pci_msi_enable)
return 0;
if (!dev || dev->no_msi || dev->current_state != PCI_D0)
return 0;
/*
* You can't ask to have 0 or less MSIs configured.
* a) it's stupid ..
* b) the list manipulation code assumes nvec >= 1.
*/
if (nvec < 1)
return 0;
/*
* Any bridge which does NOT route MSI transactions from its
* secondary bus to its primary bus must set NO_MSI flag on
* the secondary pci_bus.
* We expect only arch-specific PCI host bus controller driver
* or quirks for specific PCI bridges to be setting NO_MSI.
*/
for (bus = dev->bus; bus; bus = bus->parent)
if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
return 0;
return 1;
}
/**
* pci_msi_vec_count - Return the number of MSI vectors a device can send
* @dev: device to report about
*
* This function returns the number of MSI vectors a device requested via
* Multiple Message Capable register. It returns a negative errno if the
* device is not capable sending MSI interrupts. Otherwise, the call succeeds
* and returns a power of two, up to a maximum of 2^5 (32), according to the
* MSI specification.
**/
int pci_msi_vec_count(struct pci_dev *dev)
{
int ret;
u16 msgctl;
if (!dev->msi_cap)
return -EINVAL;
pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
return ret;
}
EXPORT_SYMBOL(pci_msi_vec_count);
void pci_msi_shutdown(struct pci_dev *dev)
{
struct msi_desc *desc;
u32 mask;
if (!pci_msi_enable || !dev || !dev->msi_enabled)
return;
BUG_ON(list_empty(dev_to_msi_list(&dev->dev)));
desc = first_pci_msi_entry(dev);
pci_msi_set_enable(dev, 0);
pci_intx_for_msi(dev, 1);
dev->msi_enabled = 0;
/* Return the device with MSI unmasked as initial states */
mask = msi_mask(desc->msi_attrib.multi_cap);
/* Keep cached state to be restored */
__pci_msi_desc_mask_irq(desc, mask, ~mask);
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = desc->msi_attrib.default_irq;
pcibios_alloc_irq(dev);
}
void pci_disable_msi(struct pci_dev *dev)
{
if (!pci_msi_enable || !dev || !dev->msi_enabled)
return;
pci_msi_shutdown(dev);
free_msi_irqs(dev);
}
EXPORT_SYMBOL(pci_disable_msi);
/**
* pci_msix_vec_count - return the number of device's MSI-X table entries
* @dev: pointer to the pci_dev data structure of MSI-X device function
* This function returns the number of device's MSI-X table entries and
* therefore the number of MSI-X vectors device is capable of sending.
* It returns a negative errno if the device is not capable of sending MSI-X
* interrupts.
**/
int pci_msix_vec_count(struct pci_dev *dev)
{
u16 control;
if (!dev->msix_cap)
return -EINVAL;
pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
return msix_table_size(control);
}
EXPORT_SYMBOL(pci_msix_vec_count);
/**
* pci_enable_msix - configure device's MSI-X capability structure
* @dev: pointer to the pci_dev data structure of MSI-X device function
* @entries: pointer to an array of MSI-X entries
* @nvec: number of MSI-X irqs requested for allocation by device driver
*
* Setup the MSI-X capability structure of device function with the number
* of requested irqs upon its software driver call to request for
* MSI-X mode enabled on its hardware device function. A return of zero
* indicates the successful configuration of MSI-X capability structure
* with new allocated MSI-X irqs. A return of < 0 indicates a failure.
* Or a return of > 0 indicates that driver request is exceeding the number
* of irqs or MSI-X vectors available. Driver should use the returned value to
* re-send its request.
**/
int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
{
int nr_entries;
int i, j;
if (!pci_msi_supported(dev, nvec))
return -EINVAL;
if (!entries)
return -EINVAL;
nr_entries = pci_msix_vec_count(dev);
if (nr_entries < 0)
return nr_entries;
if (nvec > nr_entries)
return nr_entries;
/* Check for any invalid entries */
for (i = 0; i < nvec; i++) {
if (entries[i].entry >= nr_entries)
return -EINVAL; /* invalid entry */
for (j = i + 1; j < nvec; j++) {
if (entries[i].entry == entries[j].entry)
return -EINVAL; /* duplicate entry */
}
}
WARN_ON(!!dev->msix_enabled);
/* Check whether driver already requested for MSI irq */
if (dev->msi_enabled) {
dev_info(&dev->dev, "can't enable MSI-X (MSI IRQ already assigned)\n");
return -EINVAL;
}
return msix_capability_init(dev, entries, nvec);
}
EXPORT_SYMBOL(pci_enable_msix);
void pci_msix_shutdown(struct pci_dev *dev)
{
struct msi_desc *entry;
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
/* Return the device with MSI-X masked as initial states */
for_each_pci_msi_entry(entry, dev) {
/* Keep cached states to be restored */
__pci_msix_desc_mask_irq(entry, 1);
}
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
pci_intx_for_msi(dev, 1);
dev->msix_enabled = 0;
pcibios_alloc_irq(dev);
}
void pci_disable_msix(struct pci_dev *dev)
{
if (!pci_msi_enable || !dev || !dev->msix_enabled)
return;
pci_msix_shutdown(dev);
free_msi_irqs(dev);
}
EXPORT_SYMBOL(pci_disable_msix);
void pci_no_msi(void)
{
pci_msi_enable = 0;
}
/**
* pci_msi_enabled - is MSI enabled?
*
* Returns true if MSI has not been disabled by the command-line option
* pci=nomsi.
**/
int pci_msi_enabled(void)
{
return pci_msi_enable;
}
EXPORT_SYMBOL(pci_msi_enabled);
void pci_msi_init_pci_dev(struct pci_dev *dev)
{
}
/**
* pci_enable_msi_range - configure device's MSI capability structure
* @dev: device to configure
* @minvec: minimal number of interrupts to configure
* @maxvec: maximum number of interrupts to configure
*
* This function tries to allocate a maximum possible number of interrupts in a
* range between @minvec and @maxvec. It returns a negative errno if an error
* occurs. If it succeeds, it returns the actual number of interrupts allocated
* and updates the @dev's irq member to the lowest new interrupt number;
* the other interrupt numbers allocated to this device are consecutive.
**/
int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
{
int nvec;
int rc;
if (!pci_msi_supported(dev, minvec))
return -EINVAL;
WARN_ON(!!dev->msi_enabled);
/* Check whether driver already requested MSI-X irqs */
if (dev->msix_enabled) {
dev_info(&dev->dev,
"can't enable MSI (MSI-X already enabled)\n");
return -EINVAL;
}
if (maxvec < minvec)
return -ERANGE;
nvec = pci_msi_vec_count(dev);
if (nvec < 0)
return nvec;
else if (nvec < minvec)
return -EINVAL;
else if (nvec > maxvec)
nvec = maxvec;
do {
rc = msi_capability_init(dev, nvec);
if (rc < 0) {
return rc;
} else if (rc > 0) {
if (rc < minvec)
return -ENOSPC;
nvec = rc;
}
} while (rc);
return nvec;
}
EXPORT_SYMBOL(pci_enable_msi_range);
/**
* pci_enable_msix_range - configure device's MSI-X capability structure
* @dev: pointer to the pci_dev data structure of MSI-X device function
* @entries: pointer to an array of MSI-X entries
* @minvec: minimum number of MSI-X irqs requested
* @maxvec: maximum number of MSI-X irqs requested
*
* Setup the MSI-X capability structure of device function with a maximum
* possible number of interrupts in the range between @minvec and @maxvec
* upon its software driver call to request for MSI-X mode enabled on its
* hardware device function. It returns a negative errno if an error occurs.
* If it succeeds, it returns the actual number of interrupts allocated and
* indicates the successful configuration of MSI-X capability structure
* with new allocated MSI-X interrupts.
**/
int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
int minvec, int maxvec)
{
int nvec = maxvec;
int rc;
if (maxvec < minvec)
return -ERANGE;
do {
rc = pci_enable_msix(dev, entries, nvec);
if (rc < 0) {
return rc;
} else if (rc > 0) {
if (rc < minvec)
return -ENOSPC;
nvec = rc;
}
} while (rc);
return nvec;
}
EXPORT_SYMBOL(pci_enable_msix_range);
struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc)
{
return to_pci_dev(desc->dev);
}
void *msi_desc_to_pci_sysdata(struct msi_desc *desc)
{
struct pci_dev *dev = msi_desc_to_pci_dev(desc);
return dev->bus->sysdata;
}
EXPORT_SYMBOL_GPL(msi_desc_to_pci_sysdata);
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
/**
* pci_msi_domain_write_msg - Helper to write MSI message to PCI config space
* @irq_data: Pointer to interrupt data of the MSI interrupt
* @msg: Pointer to the message
*/
void pci_msi_domain_write_msg(struct irq_data *irq_data, struct msi_msg *msg)
{
struct msi_desc *desc = irq_data_get_msi_desc(irq_data);
/*
* For MSI-X desc->irq is always equal to irq_data->irq. For
* MSI only the first interrupt of MULTI MSI passes the test.
*/
if (desc->irq == irq_data->irq)
__pci_write_msi_msg(desc, msg);
}
/**
* pci_msi_domain_calc_hwirq - Generate a unique ID for an MSI source
* @dev: Pointer to the PCI device
* @desc: Pointer to the msi descriptor
*
* The ID number is only used within the irqdomain.
*/
irq_hw_number_t pci_msi_domain_calc_hwirq(struct pci_dev *dev,
struct msi_desc *desc)
{
return (irq_hw_number_t)desc->msi_attrib.entry_nr |
PCI_DEVID(dev->bus->number, dev->devfn) << 11 |
(pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 27;
}
static inline bool pci_msi_desc_is_multi_msi(struct msi_desc *desc)
{
return !desc->msi_attrib.is_msix && desc->nvec_used > 1;
}
/**
* pci_msi_domain_check_cap - Verify that @domain supports the capabilities for @dev
* @domain: The interrupt domain to check
* @info: The domain info for verification
* @dev: The device to check
*
* Returns:
* 0 if the functionality is supported
* 1 if Multi MSI is requested, but the domain does not support it
* -ENOTSUPP otherwise
*/
int pci_msi_domain_check_cap(struct irq_domain *domain,
struct msi_domain_info *info, struct device *dev)
{
struct msi_desc *desc = first_pci_msi_entry(to_pci_dev(dev));
/* Special handling to support pci_enable_msi_range() */
if (pci_msi_desc_is_multi_msi(desc) &&
!(info->flags & MSI_FLAG_MULTI_PCI_MSI))
return 1;
else if (desc->msi_attrib.is_msix && !(info->flags & MSI_FLAG_PCI_MSIX))
return -ENOTSUPP;
return 0;
}
static int pci_msi_domain_handle_error(struct irq_domain *domain,
struct msi_desc *desc, int error)
{
/* Special handling to support pci_enable_msi_range() */
if (pci_msi_desc_is_multi_msi(desc) && error == -ENOSPC)
return 1;
return error;
}
#ifdef GENERIC_MSI_DOMAIN_OPS
static void pci_msi_domain_set_desc(msi_alloc_info_t *arg,
struct msi_desc *desc)
{
arg->desc = desc;
arg->hwirq = pci_msi_domain_calc_hwirq(msi_desc_to_pci_dev(desc),
desc);
}
#else
#define pci_msi_domain_set_desc NULL
#endif
static struct msi_domain_ops pci_msi_domain_ops_default = {
.set_desc = pci_msi_domain_set_desc,
.msi_check = pci_msi_domain_check_cap,
.handle_error = pci_msi_domain_handle_error,
};
static void pci_msi_domain_update_dom_ops(struct msi_domain_info *info)
{
struct msi_domain_ops *ops = info->ops;
if (ops == NULL) {
info->ops = &pci_msi_domain_ops_default;
} else {
if (ops->set_desc == NULL)
ops->set_desc = pci_msi_domain_set_desc;
if (ops->msi_check == NULL)
ops->msi_check = pci_msi_domain_check_cap;
if (ops->handle_error == NULL)
ops->handle_error = pci_msi_domain_handle_error;
}
}
static void pci_msi_domain_update_chip_ops(struct msi_domain_info *info)
{
struct irq_chip *chip = info->chip;
BUG_ON(!chip);
if (!chip->irq_write_msi_msg)
chip->irq_write_msi_msg = pci_msi_domain_write_msg;
if (!chip->irq_mask)
chip->irq_mask = pci_msi_mask_irq;
if (!chip->irq_unmask)
chip->irq_unmask = pci_msi_unmask_irq;
}
/**
* pci_msi_create_irq_domain - Create a MSI interrupt domain
* @fwnode: Optional fwnode of the interrupt controller
* @info: MSI domain info
* @parent: Parent irq domain
*
* Updates the domain and chip ops and creates a MSI interrupt domain.
*
* Returns:
* A domain pointer or NULL in case of failure.
*/
struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode,
struct msi_domain_info *info,
struct irq_domain *parent)
{
struct irq_domain *domain;
if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS)
pci_msi_domain_update_dom_ops(info);
if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS)
pci_msi_domain_update_chip_ops(info);
domain = msi_create_irq_domain(fwnode, info, parent);
if (!domain)
return NULL;
domain->bus_token = DOMAIN_BUS_PCI_MSI;
return domain;
}
/**
* pci_msi_domain_alloc_irqs - Allocate interrupts for @dev in @domain
* @domain: The interrupt domain to allocate from
* @dev: The device for which to allocate
* @nvec: The number of interrupts to allocate
* @type: Unused to allow simpler migration from the arch_XXX interfaces
*
* Returns:
* A virtual interrupt number or an error code in case of failure
*/
int pci_msi_domain_alloc_irqs(struct irq_domain *domain, struct pci_dev *dev,
int nvec, int type)
{
return msi_domain_alloc_irqs(domain, &dev->dev, nvec);
}
/**
* pci_msi_domain_free_irqs - Free interrupts for @dev in @domain
* @domain: The interrupt domain
* @dev: The device for which to free interrupts
*/
void pci_msi_domain_free_irqs(struct irq_domain *domain, struct pci_dev *dev)
{
msi_domain_free_irqs(domain, &dev->dev);
}
/**
* pci_msi_create_default_irq_domain - Create a default MSI interrupt domain
* @fwnode: Optional fwnode of the interrupt controller
* @info: MSI domain info
* @parent: Parent irq domain
*
* Returns: A domain pointer or NULL in case of failure. If successful
* the default PCI/MSI irqdomain pointer is updated.
*/
struct irq_domain *pci_msi_create_default_irq_domain(struct fwnode_handle *fwnode,
struct msi_domain_info *info, struct irq_domain *parent)
{
struct irq_domain *domain;
mutex_lock(&pci_msi_domain_lock);
if (pci_msi_default_domain) {
pr_err("PCI: default irq domain for PCI MSI has already been created.\n");
domain = NULL;
} else {
domain = pci_msi_create_irq_domain(fwnode, info, parent);
pci_msi_default_domain = domain;
}
mutex_unlock(&pci_msi_domain_lock);
return domain;
}
static int get_msi_id_cb(struct pci_dev *pdev, u16 alias, void *data)
{
u32 *pa = data;
*pa = alias;
return 0;
}
/**
* pci_msi_domain_get_msi_rid - Get the MSI requester id (RID)
* @domain: The interrupt domain
* @pdev: The PCI device.
*
* The RID for a device is formed from the alias, with a firmware
* supplied mapping applied
*
* Returns: The RID.
*/
u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev)
{
struct device_node *of_node;
u32 rid = 0;
pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid);
of_node = irq_domain_get_of_node(domain);
if (of_node)
rid = of_msi_map_rid(&pdev->dev, of_node, rid);
return rid;
}
/**
* pci_msi_get_device_domain - Get the MSI domain for a given PCI device
* @pdev: The PCI device
*
* Use the firmware data to find a device-specific MSI domain
* (i.e. not one that is ste as a default).
*
* Returns: The coresponding MSI domain or NULL if none has been found.
*/
struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev)
{
u32 rid = 0;
pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid);
return of_msi_map_get_device_domain(&pdev->dev, rid);
}
#endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */