2c8788bfd8
USB EHCI, OHCI, and common PHY are the SoC devices but are wrongly defined and registered in the Marzen board file. Move the data and code to their proper place in setup-r8a7779.c; while at it, we have to rename r8a7779_late_devices[] to r8a7779_standard_devices[] -- this seems legitimate since they are registered from r8a7779_add_standard_devices() anyway. Note that I'm deliberately changing the USB PHY platform device's 'id' field from (previously just omitted) 0 to -1 as the device is a single of its kind. Note also that the board and SoC code have to be in one patch to keep the code bisectable... The patch has been tested on the Marzen board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: manually applied] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
247 lines
6.5 KiB
C
247 lines
6.5 KiB
C
/*
|
|
* marzen board support
|
|
*
|
|
* Copyright (C) 2011 Renesas Solutions Corp.
|
|
* Copyright (C) 2011 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/platform_data/gpio-rcar.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/sh_hspi.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sh_mobile_sdhi.h>
|
|
#include <linux/mfd/tmio.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/r8a7779.h>
|
|
#include <mach/common.h>
|
|
#include <mach/irqs.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/traps.h>
|
|
|
|
/* Fixed 3.3V regulator to be used by SDHI0 */
|
|
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
|
|
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
|
|
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
|
|
};
|
|
|
|
/* Dummy supplies, where voltage doesn't matter */
|
|
static struct regulator_consumer_supply dummy_supplies[] = {
|
|
REGULATOR_SUPPLY("vddvario", "smsc911x"),
|
|
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
|
|
};
|
|
|
|
/* SMSC LAN89218 */
|
|
static struct resource smsc911x_resources[] = {
|
|
[0] = {
|
|
.start = 0x18000000, /* ExCS0 */
|
|
.end = 0x180000ff, /* A1->A7 */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = gic_iid(0x3c), /* IRQ 1 */
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc911x_platdata = {
|
|
.flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
};
|
|
|
|
static struct platform_device eth_device = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &smsc911x_platdata,
|
|
},
|
|
.resource = smsc911x_resources,
|
|
.num_resources = ARRAY_SIZE(smsc911x_resources),
|
|
};
|
|
|
|
static struct resource sdhi0_resources[] = {
|
|
[0] = {
|
|
.name = "sdhi0",
|
|
.start = 0xffe4c000,
|
|
.end = 0xffe4c0ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = gic_iid(0x88),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sh_mobile_sdhi_info sdhi0_platform_data = {
|
|
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
|
|
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
|
|
};
|
|
|
|
static struct platform_device sdhi0_device = {
|
|
.name = "sh_mobile_sdhi",
|
|
.num_resources = ARRAY_SIZE(sdhi0_resources),
|
|
.resource = sdhi0_resources,
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &sdhi0_platform_data,
|
|
}
|
|
};
|
|
|
|
/* Thermal */
|
|
static struct resource thermal_resources[] = {
|
|
[0] = {
|
|
.start = 0xFFC48000,
|
|
.end = 0xFFC48038 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device thermal_device = {
|
|
.name = "rcar_thermal",
|
|
.resource = thermal_resources,
|
|
.num_resources = ARRAY_SIZE(thermal_resources),
|
|
};
|
|
|
|
/* HSPI */
|
|
static struct resource hspi_resources[] = {
|
|
[0] = {
|
|
.start = 0xFFFC7000,
|
|
.end = 0xFFFC7018 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device hspi_device = {
|
|
.name = "sh-hspi",
|
|
.id = 0,
|
|
.resource = hspi_resources,
|
|
.num_resources = ARRAY_SIZE(hspi_resources),
|
|
};
|
|
|
|
/* LEDS */
|
|
static struct gpio_led marzen_leds[] = {
|
|
{
|
|
.name = "led2",
|
|
.gpio = RCAR_GP_PIN(4, 29),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led3",
|
|
.gpio = RCAR_GP_PIN(4, 30),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
}, {
|
|
.name = "led4",
|
|
.gpio = RCAR_GP_PIN(4, 31),
|
|
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data marzen_leds_pdata = {
|
|
.leds = marzen_leds,
|
|
.num_leds = ARRAY_SIZE(marzen_leds),
|
|
};
|
|
|
|
static struct platform_device leds_device = {
|
|
.name = "leds-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &marzen_leds_pdata,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *marzen_devices[] __initdata = {
|
|
ð_device,
|
|
&sdhi0_device,
|
|
&thermal_device,
|
|
&hspi_device,
|
|
&leds_device,
|
|
};
|
|
|
|
static const struct pinctrl_map marzen_pinctrl_map[] = {
|
|
/* HSPI0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
|
|
"hspi0", "hspi0"),
|
|
/* SCIF2 (CN18: DEBUG0) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
|
|
"scif2_data_c", "scif2"),
|
|
/* SCIF4 (CN19: DEBUG1) */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
|
|
"scif4_data", "scif4"),
|
|
/* SDHI0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_data4", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_ctrl", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_cd", "sdhi0"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
|
|
"sdhi0_wp", "sdhi0"),
|
|
/* SMSC */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
|
|
"intc_irq1_b", "intc"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
|
|
"lbsc_ex_cs0", "lbsc"),
|
|
/* USB0 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
|
|
"usb0", "usb0"),
|
|
/* USB1 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
|
|
"usb1", "usb1"),
|
|
/* USB2 */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
|
|
"usb2", "usb2"),
|
|
};
|
|
|
|
static void __init marzen_init(void)
|
|
{
|
|
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
|
|
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
|
regulator_register_fixed(1, dummy_supplies,
|
|
ARRAY_SIZE(dummy_supplies));
|
|
|
|
pinctrl_register_mappings(marzen_pinctrl_map,
|
|
ARRAY_SIZE(marzen_pinctrl_map));
|
|
r8a7779_pinmux_init();
|
|
|
|
r8a7779_add_standard_devices();
|
|
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
|
|
}
|
|
|
|
MACHINE_START(MARZEN, "marzen")
|
|
.smp = smp_ops(r8a7779_smp_ops),
|
|
.map_io = r8a7779_map_io,
|
|
.init_early = r8a7779_add_early_devices,
|
|
.nr_irqs = NR_IRQS_LEGACY,
|
|
.init_irq = r8a7779_init_irq,
|
|
.init_machine = marzen_init,
|
|
.init_late = r8a7779_init_late,
|
|
.init_time = r8a7779_earlytimer_init,
|
|
MACHINE_END
|