2db4a76d5f
Implement selftest feature as specified by chip manufacturer. Control: read selftest sysfs entry Response: "OK x y z" or "FAIL x y z" where x, y, and z are difference between selftest mode and normal mode. Test is passed when values are within acceptance limit values. Acceptance limits are provided via platform data. See chip spesifications for acceptance limits. If limits are not properly set, OK / FAIL decision is meaningless. However, userspace application can still make decision based on the numeric x, y, z values. Selftest is meant for HW diagnostic purposes. It is not meant to be called during normal use of the chip. It may cause false interrupt events. Selftest mode delays polling of the normal results but it doesn't cause wrong values. Chip must be in static state during selftest. Any acceration during the test causes most probably failure. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
241 lines
5.8 KiB
C
241 lines
5.8 KiB
C
/*
|
|
* lis3lv02d.h - ST LIS3LV02DL accelerometer driver
|
|
*
|
|
* Copyright (C) 2007-2008 Yan Burman
|
|
* Copyright (C) 2008-2009 Eric Piel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#include <linux/platform_device.h>
|
|
#include <linux/input-polldev.h>
|
|
|
|
/*
|
|
* This driver tries to support the "digital" accelerometer chips from
|
|
* STMicroelectronics such as LIS3LV02DL, LIS302DL, LIS3L02DQ, LIS331DL,
|
|
* LIS35DE, or LIS202DL. They are very similar in terms of programming, with
|
|
* almost the same registers. In addition to differing on physical properties,
|
|
* they differ on the number of axes (2/3), precision (8/12 bits), and special
|
|
* features (freefall detection, click...). Unfortunately, not all the
|
|
* differences can be probed via a register.
|
|
* They can be connected either via I²C or SPI.
|
|
*/
|
|
|
|
#include <linux/lis3lv02d.h>
|
|
|
|
enum lis3_reg {
|
|
WHO_AM_I = 0x0F,
|
|
OFFSET_X = 0x16,
|
|
OFFSET_Y = 0x17,
|
|
OFFSET_Z = 0x18,
|
|
GAIN_X = 0x19,
|
|
GAIN_Y = 0x1A,
|
|
GAIN_Z = 0x1B,
|
|
CTRL_REG1 = 0x20,
|
|
CTRL_REG2 = 0x21,
|
|
CTRL_REG3 = 0x22,
|
|
HP_FILTER_RESET = 0x23,
|
|
STATUS_REG = 0x27,
|
|
OUTX_L = 0x28,
|
|
OUTX_H = 0x29,
|
|
OUTX = 0x29,
|
|
OUTY_L = 0x2A,
|
|
OUTY_H = 0x2B,
|
|
OUTY = 0x2B,
|
|
OUTZ_L = 0x2C,
|
|
OUTZ_H = 0x2D,
|
|
OUTZ = 0x2D,
|
|
};
|
|
|
|
enum lis302d_reg {
|
|
FF_WU_CFG_1 = 0x30,
|
|
FF_WU_SRC_1 = 0x31,
|
|
FF_WU_THS_1 = 0x32,
|
|
FF_WU_DURATION_1 = 0x33,
|
|
FF_WU_CFG_2 = 0x34,
|
|
FF_WU_SRC_2 = 0x35,
|
|
FF_WU_THS_2 = 0x36,
|
|
FF_WU_DURATION_2 = 0x37,
|
|
CLICK_CFG = 0x38,
|
|
CLICK_SRC = 0x39,
|
|
CLICK_THSY_X = 0x3B,
|
|
CLICK_THSZ = 0x3C,
|
|
CLICK_TIMELIMIT = 0x3D,
|
|
CLICK_LATENCY = 0x3E,
|
|
CLICK_WINDOW = 0x3F,
|
|
};
|
|
|
|
enum lis3lv02d_reg {
|
|
FF_WU_CFG = 0x30,
|
|
FF_WU_SRC = 0x31,
|
|
FF_WU_ACK = 0x32,
|
|
FF_WU_THS_L = 0x34,
|
|
FF_WU_THS_H = 0x35,
|
|
FF_WU_DURATION = 0x36,
|
|
DD_CFG = 0x38,
|
|
DD_SRC = 0x39,
|
|
DD_ACK = 0x3A,
|
|
DD_THSI_L = 0x3C,
|
|
DD_THSI_H = 0x3D,
|
|
DD_THSE_L = 0x3E,
|
|
DD_THSE_H = 0x3F,
|
|
};
|
|
|
|
enum lis3_who_am_i {
|
|
WAI_12B = 0x3A, /* 12 bits: LIS3LV02D[LQ]... */
|
|
WAI_8B = 0x3B, /* 8 bits: LIS[23]02D[LQ]... */
|
|
WAI_6B = 0x52, /* 6 bits: LIS331DLF - not supported */
|
|
};
|
|
|
|
enum lis3lv02d_ctrl1_12b {
|
|
CTRL1_Xen = 0x01,
|
|
CTRL1_Yen = 0x02,
|
|
CTRL1_Zen = 0x04,
|
|
CTRL1_ST = 0x08,
|
|
CTRL1_DF0 = 0x10,
|
|
CTRL1_DF1 = 0x20,
|
|
CTRL1_PD0 = 0x40,
|
|
CTRL1_PD1 = 0x80,
|
|
};
|
|
|
|
/* Delta to ctrl1_12b version */
|
|
enum lis3lv02d_ctrl1_8b {
|
|
CTRL1_STM = 0x08,
|
|
CTRL1_STP = 0x10,
|
|
CTRL1_FS = 0x20,
|
|
CTRL1_PD = 0x40,
|
|
CTRL1_DR = 0x80,
|
|
};
|
|
|
|
enum lis3lv02d_ctrl2 {
|
|
CTRL2_DAS = 0x01,
|
|
CTRL2_SIM = 0x02,
|
|
CTRL2_DRDY = 0x04,
|
|
CTRL2_IEN = 0x08,
|
|
CTRL2_BOOT = 0x10,
|
|
CTRL2_BLE = 0x20,
|
|
CTRL2_BDU = 0x40, /* Block Data Update */
|
|
CTRL2_FS = 0x80, /* Full Scale selection */
|
|
};
|
|
|
|
enum lis302d_ctrl2 {
|
|
HP_FF_WU2 = 0x08,
|
|
HP_FF_WU1 = 0x04,
|
|
};
|
|
|
|
enum lis3lv02d_ctrl3 {
|
|
CTRL3_CFS0 = 0x01,
|
|
CTRL3_CFS1 = 0x02,
|
|
CTRL3_FDS = 0x10,
|
|
CTRL3_HPFF = 0x20,
|
|
CTRL3_HPDD = 0x40,
|
|
CTRL3_ECK = 0x80,
|
|
};
|
|
|
|
enum lis3lv02d_status_reg {
|
|
STATUS_XDA = 0x01,
|
|
STATUS_YDA = 0x02,
|
|
STATUS_ZDA = 0x04,
|
|
STATUS_XYZDA = 0x08,
|
|
STATUS_XOR = 0x10,
|
|
STATUS_YOR = 0x20,
|
|
STATUS_ZOR = 0x40,
|
|
STATUS_XYZOR = 0x80,
|
|
};
|
|
|
|
enum lis3lv02d_ff_wu_cfg {
|
|
FF_WU_CFG_XLIE = 0x01,
|
|
FF_WU_CFG_XHIE = 0x02,
|
|
FF_WU_CFG_YLIE = 0x04,
|
|
FF_WU_CFG_YHIE = 0x08,
|
|
FF_WU_CFG_ZLIE = 0x10,
|
|
FF_WU_CFG_ZHIE = 0x20,
|
|
FF_WU_CFG_LIR = 0x40,
|
|
FF_WU_CFG_AOI = 0x80,
|
|
};
|
|
|
|
enum lis3lv02d_ff_wu_src {
|
|
FF_WU_SRC_XL = 0x01,
|
|
FF_WU_SRC_XH = 0x02,
|
|
FF_WU_SRC_YL = 0x04,
|
|
FF_WU_SRC_YH = 0x08,
|
|
FF_WU_SRC_ZL = 0x10,
|
|
FF_WU_SRC_ZH = 0x20,
|
|
FF_WU_SRC_IA = 0x40,
|
|
};
|
|
|
|
enum lis3lv02d_dd_cfg {
|
|
DD_CFG_XLIE = 0x01,
|
|
DD_CFG_XHIE = 0x02,
|
|
DD_CFG_YLIE = 0x04,
|
|
DD_CFG_YHIE = 0x08,
|
|
DD_CFG_ZLIE = 0x10,
|
|
DD_CFG_ZHIE = 0x20,
|
|
DD_CFG_LIR = 0x40,
|
|
DD_CFG_IEND = 0x80,
|
|
};
|
|
|
|
enum lis3lv02d_dd_src {
|
|
DD_SRC_XL = 0x01,
|
|
DD_SRC_XH = 0x02,
|
|
DD_SRC_YL = 0x04,
|
|
DD_SRC_YH = 0x08,
|
|
DD_SRC_ZL = 0x10,
|
|
DD_SRC_ZH = 0x20,
|
|
DD_SRC_IA = 0x40,
|
|
};
|
|
|
|
struct axis_conversion {
|
|
s8 x;
|
|
s8 y;
|
|
s8 z;
|
|
};
|
|
|
|
struct lis3lv02d {
|
|
void *bus_priv; /* used by the bus layer only */
|
|
int (*init) (struct lis3lv02d *lis3);
|
|
int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
|
|
int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
|
|
|
|
u8 whoami; /* indicates measurement precision */
|
|
s16 (*read_data) (struct lis3lv02d *lis3, int reg);
|
|
int mdps_max_val;
|
|
int pwron_delay;
|
|
|
|
struct input_polled_dev *idev; /* input device */
|
|
struct platform_device *pdev; /* platform device */
|
|
atomic_t count; /* interrupt count after last read */
|
|
int xcalib; /* calibrated null value for x */
|
|
int ycalib; /* calibrated null value for y */
|
|
int zcalib; /* calibrated null value for z */
|
|
struct axis_conversion ac; /* hw -> logical axis */
|
|
|
|
u32 irq; /* IRQ number */
|
|
struct fasync_struct *async_queue; /* queue for the misc device */
|
|
wait_queue_head_t misc_wait; /* Wait queue for the misc device */
|
|
unsigned long misc_opened; /* bit0: whether the device is open */
|
|
|
|
struct lis3lv02d_platform_data *pdata; /* for passing board config */
|
|
struct mutex mutex; /* Serialize poll and selftest */
|
|
};
|
|
|
|
int lis3lv02d_init_device(struct lis3lv02d *lis3);
|
|
int lis3lv02d_joystick_enable(void);
|
|
void lis3lv02d_joystick_disable(void);
|
|
void lis3lv02d_poweroff(struct lis3lv02d *lis3);
|
|
void lis3lv02d_poweron(struct lis3lv02d *lis3);
|
|
int lis3lv02d_remove_fs(struct lis3lv02d *lis3);
|
|
|
|
extern struct lis3lv02d lis3_dev;
|