redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/exynos4210-trats.dts
Hoegeun Kwon 4c74ea4e20 ARM: dts: exynos: Add the burst and esc clock frequency properties to DSI node 
Add the burst and esc clock frequency properties to the parent (DSI node).
Currently the clock is parsed from the port node, while it should be
taken from the dsi node.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-03-08 09:09:05 +02:00

496 lines
11 KiB
Plaintext
Raw Blame History

/*
* Samsung's Exynos4210 based Trats board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Device tree source file for Samsung's Trats board which is based on
* Samsung's Exynos4210 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats based on Exynos4210";
compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x10000000
0x50000000 0x10000000
0x60000000 0x10000000
0x70000000 0x10000000>;
};
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
stdout-path = &serial_2;
};
regulators {
compatible = "simple-bus";
vemmc_reg: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
tsp_reg: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cam_af_28v_reg: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cam_io_en_reg: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
cam_io_12v_reg: regulator-4 {
compatible = "regulator-fixed";
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vt_core_15v_reg: regulator-5 {
compatible = "regulator-fixed";
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
gpio-keys {
compatible = "gpio-keys";
vol-down-key {
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
vol-up-key {
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
wakeup-source;
};
ok-key {
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <10>;
};
};
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
clock-frequency = <0>;
};
xusbxti {
compatible = "samsung,clock-xusbxti";
clock-frequency = <24000000>;
};
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 2 2>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 4 4>;
};
};
};
};
camera {
pinctrl-names = "default";
pinctrl-0 = <>;
status = "okay";
fimc_0: fimc@11800000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
<&clock CLK_SCLK_FIMC0>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
<&clock CLK_SCLK_FIMC1>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
fimc_2: fimc@11820000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
<&clock CLK_SCLK_FIMC2>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
fimc_3: fimc@11830000 {
status = "okay";
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
<&clock CLK_SCLK_FIMC3>;
assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
assigned-clock-rates = <0>, <160000000>;
};
};
};
&cpu0 {
cpu0-supply = <&varm_breg>;
};
&dsi_0 {
vddcore-supply = <&vusb_reg>;
vddio-supply = <&vmipi_reg>;
samsung,burst-clock-frequency = <500000000>;
samsung,esc-clock-frequency = <20000000>;
samsung,pll-clock-frequency = <24000000>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&dsi_in>;
samsung,burst-clock-frequency = <500000000>;
samsung,esc-clock-frequency = <20000000>;
};
};
};
panel@0 {
reg = <0>;
compatible = "samsung,s6e8aa0";
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
flip-horizontal;
flip-vertical;
panel-width-mm = <58>;
panel-height-mm = <103>;
display-timings {
timing-0 {
clock-frequency = <57153600>;
hactive = <720>;
vactive = <1280>;
hfront-porch = <5>;
hback-porch = <5>;
hsync-len = <5>;
vfront-porch = <13>;
vback-porch = <1>;
vsync-len = <2>;
};
};
port {
dsi_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
};
&exynos_usbphy {
status = "okay";
vbus-supply = <&safe1_sreg>;
};
&fimd {
status = "okay";
};
&hsotg {
vusb_d-supply = <&vusb_reg>;
vusb_a-supply = <&vusbdac_reg>;
dr_mode = "peripheral";
status = "okay";
};
&i2c_3 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <400000>;
pinctrl-0 = <&i2c3_bus>;
pinctrl-names = "default";
status = "okay";
mms114-touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpx0>;
interrupts = <4 2>;
x-size = <720>;
y-size = <1280>;
avdd-supply = <&tsp_reg>;
vdd-supply = <&tsp_reg>;
};
};
&i2c_5 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <100000>;
pinctrl-0 = <&i2c5_bus>;
pinctrl-names = "default";
status = "okay";
max8997_pmic@66 {
compatible = "maxim,max8997-pmic";
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <7 0>;
max8997,pmic-buck1-uses-gpio-dvs;
max8997,pmic-buck2-uses-gpio-dvs;
max8997,pmic-buck5-uses-gpio-dvs;
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <0>;
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
<&gpx0 6 GPIO_ACTIVE_HIGH>,
<&gpl0 0 GPIO_ACTIVE_HIGH>;
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
<1250000>, <1200000>,
<1150000>, <1100000>,
<1000000>, <950000>;
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
<950000>, <900000>,
<1100000>, <1000000>,
<950000>, <900000>;
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>;
regulators {
valive_reg: LDO2 {
regulator-name = "VALIVE_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vusb_reg: LDO3 {
regulator-name = "VUSB_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
vmipi_reg: LDO4 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vpda_reg: LDO6 {
regulator-name = "VCC_1.8V_PDA";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcam_reg: LDO7 {
regulator-name = "CAM_ISP_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vusbdac_reg: LDO8 {
regulator-name = "VUSB+VDAC_3.3V_C210";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vccpda_reg: LDO9 {
regulator-name = "VCC_2.8V_PDA";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
vpll_reg: LDO10 {
regulator-name = "VPLL_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vtcam_reg: LDO12 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcclcd_reg: LDO13 {
regulator-name = "VCC_3.3V_LCD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vlcd_reg: LDO15 {
regulator-name = "VLCD_2.2V";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
};
camsensor_reg: LDO16 {
regulator-name = "CAM_SENSOR_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddq_reg: LDO21 {
regulator-name = "VDDQ_M1M2_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
varm_breg: BUCK1 {
/*
* HACK: The real name is VARM_1.2V_C210,
* but exynos-cpufreq does not support
* DT-based regulator lookup yet.
*/
regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
vint_breg: BUCK2 {
regulator-name = "VINT_1.1V_C210";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
camisp_breg: BUCK4 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vmem_breg: BUCK5 {
regulator-name = "VMEM_1.2V_C210";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vccsub_breg: BUCK7 {
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
safe1_sreg: ESAFEOUT1 {
regulator-name = "SAFEOUT1";
};
safe2_sreg: ESAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-boot-on;
};
};
};
};
&sdhci_0 {
bus-width = <8>;
non-removable;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
pinctrl-names = "default";
vmmc-supply = <&vemmc_reg>;
status = "okay";
};
&serial_0 {
status = "okay";
};
&serial_1 {
status = "okay";
};
&serial_2 {
status = "okay";
};
&serial_3 {
status = "okay";
};
&tmu {
status = "okay";
};
View git blame Copy permalink