4480de8245
Quoting Philipp Zabel: "Since this regulator is used as the TVDAC analog power supply, this range should at least be limited to the analog power supply range of the TVDAC, listed in Table 74-9. of the i.MX53 reference manual (2.5-2.75V). But since the nominal voltage is 2.75V, which was used to determine the analog gain that is supposed to result in the necessary 0.7V peak-to-peak amplitude on the VGA output, I'd say we should just fix the voltage to 2750000 here." , so limit the TVDAC analog power supply as suggested. Suggested-by: Lucas Stach <l.stach@pengutronix.de> Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
157 lines
3.3 KiB
Plaintext
157 lines
3.3 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx53-qsb-common.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX53 Quick Start-R Board";
|
|
compatible = "fsl,imx53-qsrb", "fsl,imx53";
|
|
};
|
|
|
|
&iomuxc {
|
|
imx53-qsrb {
|
|
pinctrl_pmic: pmicgrp {
|
|
fsl,pins = <
|
|
MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pmic: mc34708@8 {
|
|
compatible = "fsl,mc34708";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
reg = <0x08>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
|
|
regulators {
|
|
sw1_reg: sw1a {
|
|
regulator-name = "SW1";
|
|
regulator-min-microvolt = <650000>;
|
|
regulator-max-microvolt = <1437500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw1b_reg: sw1b {
|
|
regulator-name = "SW1B";
|
|
regulator-min-microvolt = <650000>;
|
|
regulator-max-microvolt = <1437500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-name = "SW2";
|
|
regulator-min-microvolt = <650000>;
|
|
regulator-max-microvolt = <1437500>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3_reg: sw3 {
|
|
regulator-name = "SW3";
|
|
regulator-min-microvolt = <650000>;
|
|
regulator-max-microvolt = <1425000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
sw4a_reg: sw4a {
|
|
regulator-name = "SW4A";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4b_reg: sw4b {
|
|
regulator-name = "SW4B";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw5_reg: sw5 {
|
|
regulator-name = "SW5";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-name = "SWBST";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: vpll {
|
|
regulator-name = "VPLL";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vrefddr_reg: vrefddr {
|
|
regulator-name = "VREFDDR";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vusb_reg: vusb {
|
|
regulator-name = "VUSB";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vusb2_reg: vusb2 {
|
|
regulator-name = "VUSB2";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdac_reg: vdac {
|
|
regulator-name = "VDAC";
|
|
regulator-min-microvolt = <2750000>;
|
|
regulator-max-microvolt = <2750000>;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-name = "VGEN1";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-name = "VGEN2";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tve {
|
|
dac-supply = <&vdac_reg>;
|
|
};
|