21677ecca2
This reverts commit 769907ae6e.
This change caused issues with people using USB gadget for serial
consoles. In addition, with the other USB changes coming in, it
makes sense to revert this patch and apply the new set as it
becomes ready.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
1088 lines
22 KiB
Plaintext
1088 lines
22 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
|
|
#include <dt-bindings/clock/qcom,rpmcc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
model = "Qualcomm MSM8974";
|
|
compatible = "qcom,msm8974";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mpss@08000000 {
|
|
reg = <0x08000000 0x5100000>;
|
|
no-map;
|
|
};
|
|
|
|
mba@00d100000 {
|
|
reg = <0x0d100000 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
reserved@0d200000 {
|
|
reg = <0x0d200000 0xa00000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_region: adsp@0dc00000 {
|
|
reg = <0x0dc00000 0x1900000>;
|
|
no-map;
|
|
};
|
|
|
|
venus@0f500000 {
|
|
reg = <0x0f500000 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
smem_region: smem@fa00000 {
|
|
reg = <0xfa00000 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
tz@0fc00000 {
|
|
reg = <0x0fc00000 0x160000>;
|
|
no-map;
|
|
};
|
|
|
|
rfsa@0fd60000 {
|
|
reg = <0x0fd60000 0x20000>;
|
|
no-map;
|
|
};
|
|
|
|
rmtfs@0fd80000 {
|
|
reg = <0x0fd80000 0x180000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <1 9 0xf04>;
|
|
|
|
CPU0: cpu@0 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
qcom,saw = <&saw_l2>;
|
|
};
|
|
|
|
idle-states {
|
|
CPU_SPC: spc {
|
|
compatible = "qcom,idle-state-spc",
|
|
"arm,idle-state";
|
|
entry-latency-us = <150>;
|
|
exit-latency-us = <200>;
|
|
min-residency-us = <2000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal0 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 5>;
|
|
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit0: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal1 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 6>;
|
|
|
|
trips {
|
|
cpu_alert1: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit1: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal2 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 7>;
|
|
|
|
trips {
|
|
cpu_alert2: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit2: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal3 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 8>;
|
|
|
|
trips {
|
|
cpu_alert3: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit3: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <1 7 0xf04>;
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 2 0xf08>,
|
|
<1 3 0xf08>,
|
|
<1 4 0xf08>,
|
|
<1 1 0xf08>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
adsp-pil {
|
|
compatible = "qcom,msm8974-adsp-pil";
|
|
|
|
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
|
|
|
|
cx-supply = <&pm8841_s2>;
|
|
|
|
clocks = <&xo_board>;
|
|
clock-names = "xo";
|
|
|
|
memory-region = <&adsp_region>;
|
|
|
|
qcom,smem-states = <&adsp_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
|
|
memory-region = <&smem_region>;
|
|
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
|
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 10>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-modem {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 14>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-wcnss {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <451>, <431>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 18>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <4>;
|
|
|
|
wcnss_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
wcnss_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smsm {
|
|
compatible = "qcom,smsm";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,ipc-1 = <&apcs 8 13>;
|
|
qcom,ipc-2 = <&apcs 8 9>;
|
|
qcom,ipc-3 = <&apcs 8 19>;
|
|
|
|
apps_smsm: apps@0 {
|
|
reg = <0>;
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smsm: modem@1 {
|
|
reg = <1>;
|
|
interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
adsp_smsm: adsp@2 {
|
|
reg = <2>;
|
|
interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
wcnss_smsm: wcnss@7 {
|
|
reg = <7>;
|
|
interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm";
|
|
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
|
|
clock-names = "core", "bus", "iface";
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@f9000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0xf9000000 0x1000>,
|
|
<0xf9002000 0x1000>;
|
|
};
|
|
|
|
apcs: syscon@f9011000 {
|
|
compatible = "syscon";
|
|
reg = <0xf9011000 0x1000>;
|
|
};
|
|
|
|
qfprom: qfprom@fc4bc000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "qcom,qfprom";
|
|
reg = <0xfc4bc000 0x1000>;
|
|
tsens_calib: calib@d0 {
|
|
reg = <0xd0 0x18>;
|
|
};
|
|
tsens_backup: backup@440 {
|
|
reg = <0x440 0x10>;
|
|
};
|
|
};
|
|
|
|
tsens: thermal-sensor@fc4a8000 {
|
|
compatible = "qcom,msm8974-tsens";
|
|
reg = <0xfc4a8000 0x2000>;
|
|
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
|
|
nvmem-cell-names = "calib", "calib_backup";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
timer@f9020000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0xf9020000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@f9021000 {
|
|
frame-number = <0>;
|
|
interrupts = <0 8 0x4>,
|
|
<0 7 0x4>;
|
|
reg = <0xf9021000 0x1000>,
|
|
<0xf9022000 0x1000>;
|
|
};
|
|
|
|
frame@f9023000 {
|
|
frame-number = <1>;
|
|
interrupts = <0 9 0x4>;
|
|
reg = <0xf9023000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9024000 {
|
|
frame-number = <2>;
|
|
interrupts = <0 10 0x4>;
|
|
reg = <0xf9024000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9025000 {
|
|
frame-number = <3>;
|
|
interrupts = <0 11 0x4>;
|
|
reg = <0xf9025000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9026000 {
|
|
frame-number = <4>;
|
|
interrupts = <0 12 0x4>;
|
|
reg = <0xf9026000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9027000 {
|
|
frame-number = <5>;
|
|
interrupts = <0 13 0x4>;
|
|
reg = <0xf9027000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9028000 {
|
|
frame-number = <6>;
|
|
interrupts = <0 14 0x4>;
|
|
reg = <0xf9028000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
saw0: power-controller@f9089000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw1: power-controller@f9099000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw2: power-controller@f90a9000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw3: power-controller@f90b9000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw_l2: power-controller@f9012000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0xf9012000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
acc0: clock-controller@f9088000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@f9098000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@f90a8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@f90b8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
restart@fc4ab000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0xfc4ab000 0x4>;
|
|
};
|
|
|
|
gcc: clock-controller@fc400000 {
|
|
compatible = "qcom,gcc-msm8974";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfc400000 0x4000>;
|
|
};
|
|
|
|
tcsr_mutex_block: syscon@fd484000 {
|
|
compatible = "syscon";
|
|
reg = <0xfd484000 0x2000>;
|
|
};
|
|
|
|
mmcc: clock-controller@fd8c0000 {
|
|
compatible = "qcom,mmcc-msm8974";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfd8c0000 0x6000>;
|
|
};
|
|
|
|
tcsr_mutex: tcsr-mutex {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_block 0 0x80>;
|
|
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
rpm_msg_ram: memory@fc428000 {
|
|
compatible = "qcom,rpm-msg-ram";
|
|
reg = <0xfc428000 0x4000>;
|
|
};
|
|
|
|
blsp1_uart1: serial@f991d000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf991d000 0x1000>;
|
|
interrupts = <0 107 0x0>;
|
|
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_uart2: serial@f991e000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf991e000 0x1000>;
|
|
interrupts = <0 108 0x0>;
|
|
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f9824900 {
|
|
compatible = "qcom,sdhci-msm-v4";
|
|
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <0 123 0>, <0 138 0>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
|
|
<&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
compatible = "qcom,sdhci-msm-v4";
|
|
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <0 125 0>, <0 221 0>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
|
|
<&gcc GCC_SDCC2_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
rng@f9bff000 {
|
|
compatible = "qcom,prng";
|
|
reg = <0xf9bff000 0x200>;
|
|
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
msmgpio: pinctrl@fd510000 {
|
|
compatible = "qcom,msm8974-pinctrl";
|
|
reg = <0xfd510000 0x4000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 208 0>;
|
|
};
|
|
|
|
i2c@f9924000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9924000 0x1000>;
|
|
interrupts = <0 96 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c8: i2c@f9964000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9964000 0x1000>;
|
|
interrupts = <0 102 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c11: i2c@f9967000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9967000 0x1000>;
|
|
interrupts = <0 105 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
spmi_bus: spmi@fc4cf000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg-names = "core", "intr", "cnfg";
|
|
reg = <0xfc4cf000 0x1000>,
|
|
<0xfc4cb000 0x1000>,
|
|
<0xfc4ca000 0x1000>;
|
|
interrupt-names = "periph_irq";
|
|
interrupts = <0 190 0>;
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
};
|
|
|
|
blsp2_dma: dma-controller@f9944000 {
|
|
compatible = "qcom,bam-v1.4.0";
|
|
reg = <0xf9944000 0x19000>;
|
|
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
etr@fc322000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0xfc322000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
port {
|
|
etr_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&replicator_out0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@fc318000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0xfc318000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
port {
|
|
tpiu_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&replicator_out1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator@fc31c000 {
|
|
compatible = "qcom,coresight-replicator1x", "arm,primecell";
|
|
reg = <0xfc31c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out0: endpoint {
|
|
remote-endpoint = <&etr_in>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out1: endpoint {
|
|
remote-endpoint = <&tpiu_in>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <0>;
|
|
replicator_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etf_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etf@fc307000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0xfc307000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
etf_out: endpoint {
|
|
remote-endpoint = <&replicator_in>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <0>;
|
|
etf_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&merger_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc31b000 {
|
|
compatible = "arm,coresight-funnel", "arm,primecell";
|
|
reg = <0xfc31b000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 0 - connected trought funnel to Audio, Modem and
|
|
* Resource and Power Manager CPU's
|
|
* 2...7 - not-connected
|
|
*/
|
|
port@1 {
|
|
reg = <1>;
|
|
merger_in1: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&funnel1_out>;
|
|
};
|
|
};
|
|
port@8 {
|
|
reg = <0>;
|
|
merger_out: endpoint {
|
|
remote-endpoint = <&etf_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc31a000 {
|
|
compatible = "arm,coresight-funnel", "arm,primecell";
|
|
reg = <0xfc31a000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 0 - not-connected
|
|
* 1 - connected trought funnel to Multimedia CPU
|
|
* 2 - connected to Wireless CPU
|
|
* 3 - not-connected
|
|
* 4 - not-connected
|
|
* 6 - not-connected
|
|
* 7 - connected to STM
|
|
*/
|
|
port@5 {
|
|
reg = <5>;
|
|
funnel1_in5: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&kpss_out>;
|
|
};
|
|
};
|
|
port@8 {
|
|
reg = <0>;
|
|
funnel1_out: endpoint {
|
|
remote-endpoint = <&merger_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
|
|
compatible = "arm,coresight-funnel", "arm,primecell";
|
|
reg = <0xfc345000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
kpss_in0: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm0_out>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
kpss_in1: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm1_out>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
kpss_in2: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm2_out>;
|
|
};
|
|
};
|
|
port@3 {
|
|
reg = <3>;
|
|
kpss_in3: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm3_out>;
|
|
};
|
|
};
|
|
port@8 {
|
|
reg = <0>;
|
|
kpss_out: endpoint {
|
|
remote-endpoint = <&funnel1_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33c000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU0>;
|
|
|
|
port {
|
|
etm0_out: endpoint {
|
|
remote-endpoint = <&kpss_in0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33d000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33d000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU1>;
|
|
|
|
port {
|
|
etm1_out: endpoint {
|
|
remote-endpoint = <&kpss_in1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33e000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33e000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU2>;
|
|
|
|
port {
|
|
etm2_out: endpoint {
|
|
remote-endpoint = <&kpss_in2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33f000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33f000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU3>;
|
|
|
|
port {
|
|
etm3_out: endpoint {
|
|
remote-endpoint = <&kpss_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
smd {
|
|
compatible = "qcom,smd";
|
|
|
|
adsp {
|
|
interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 8>;
|
|
qcom,smd-edge = <1>;
|
|
};
|
|
|
|
modem {
|
|
interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 12>;
|
|
qcom,smd-edge = <0>;
|
|
};
|
|
|
|
rpm {
|
|
interrupts = <0 168 1>;
|
|
qcom,ipc = <&apcs 8 0>;
|
|
qcom,smd-edge = <15>;
|
|
|
|
rpm_requests {
|
|
compatible = "qcom,rpm-msm8974";
|
|
qcom,smd-channels = "rpm_requests";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8841-regulators {
|
|
compatible = "qcom,rpm-pm8841-regulators";
|
|
|
|
pm8841_s1: s1 {};
|
|
pm8841_s2: s2 {};
|
|
pm8841_s3: s3 {};
|
|
pm8841_s4: s4 {};
|
|
pm8841_s5: s5 {};
|
|
pm8841_s6: s6 {};
|
|
pm8841_s7: s7 {};
|
|
pm8841_s8: s8 {};
|
|
};
|
|
|
|
pm8941-regulators {
|
|
compatible = "qcom,rpm-pm8941-regulators";
|
|
|
|
pm8941_s1: s1 {};
|
|
pm8941_s2: s2 {};
|
|
pm8941_s3: s3 {};
|
|
pm8941_5v: s4 {};
|
|
|
|
pm8941_l1: l1 {};
|
|
pm8941_l2: l2 {};
|
|
pm8941_l3: l3 {};
|
|
pm8941_l4: l4 {};
|
|
pm8941_l5: l5 {};
|
|
pm8941_l6: l6 {};
|
|
pm8941_l7: l7 {};
|
|
pm8941_l8: l8 {};
|
|
pm8941_l9: l9 {};
|
|
pm8941_l10: l10 {};
|
|
pm8941_l11: l11 {};
|
|
pm8941_l12: l12 {};
|
|
pm8941_l13: l13 {};
|
|
pm8941_l14: l14 {};
|
|
pm8941_l15: l15 {};
|
|
pm8941_l16: l16 {};
|
|
pm8941_l17: l17 {};
|
|
pm8941_l18: l18 {};
|
|
pm8941_l19: l19 {};
|
|
pm8941_l20: l20 {};
|
|
pm8941_l21: l21 {};
|
|
pm8941_l22: l22 {};
|
|
pm8941_l23: l23 {};
|
|
pm8941_l24: l24 {};
|
|
|
|
pm8941_lvs1: lvs1 {};
|
|
pm8941_lvs2: lvs2 {};
|
|
pm8941_lvs3: lvs3 {};
|
|
|
|
pm8941_5vs1: 5vs1 {};
|
|
pm8941_5vs2: 5vs2 {};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vreg_boost: vreg-boost {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vreg-boost";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&boost_bypass_n_pin>;
|
|
};
|
|
vreg_vph_pwr: vreg-vph-pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph-pwr";
|
|
|
|
regulator-min-microvolt = <3600000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
|
|
regulator-always-on;
|
|
};
|
|
};
|