1
0
Fork 0
alistair23-linux/drivers/usb
George Cherian 2fc711d763 usb: phy: am335x: Enable USB remote wakeup using PHY wakeup
USB remote wakeup using PHY wakeup is supported only in standby mode.
Enabling the PHY_WKUP will break DS0 mode of system suspend.
If the same is enabled while entering DS0, AM33xx never stays in DS0,
it returns immediately from DS0. By default make the PHY wakeup
disabled, using sysfs entry enable the same manually to get
the remote wakeup working from standby.

echo enabled > /sys/bus/platform/device/<usb phy id>/power/wakeup
This will enable the PHY wakeup while going to standby.

PHY wakeup feature is required to wakeup  the system from standby
state. Since AM33xx has a bug in which PHY wakeup should not
be enabled while entering DS0, disable the same by default.
A user wishing to use USB wakeup from standby mode need to enable
the same using the sysfs entries.

Also remove am335x_phy_runtime_(suspend/resume) this driver doesnot really
enable/disable the clocks to the PHY.
Add am335x_phy_(suspend/resume) and use the same for enabling the PHY_WKUP.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-19 09:27:41 -06:00
..
atm usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros 2013-10-29 16:50:52 -07:00
c67x00 tree-wide: use reinit_completion instead of INIT_COMPLETION 2013-11-15 09:32:21 +09:00
chipidea usb: gadget: add "maxpacket_limit" field to struct usb_ep 2013-12-17 13:17:41 -06:00
class USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem 2013-12-04 16:53:03 -08:00
core usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED 2013-12-04 17:00:43 -08:00
dwc3 Linux 3.13-rc4 2013-12-19 09:18:53 -06:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget Linux 3.13-rc4 2013-12-19 09:18:53 -06:00
host usb: ohci-pxa27x: include linux/dma-mapping.h 2013-12-04 16:57:46 -08:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc usb: usbtest: support container id descriptor test 2013-10-30 10:15:41 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb Linux 3.13-rc4 2013-12-19 09:18:53 -06:00
phy usb: phy: am335x: Enable USB remote wakeup using PHY wakeup 2013-12-19 09:27:41 -06:00
renesas_usbhs usb: gadget: add "maxpacket_limit" field to struct usb_ep 2013-12-17 13:17:41 -06:00
serial USB: pl2303: fixed handling of CS5 setting 2013-12-02 21:52:57 -08:00
storage usb-storage: add quirk for mandatory READ_CAPACITY_16 2013-10-16 13:32:04 -07:00
wusbcore usb: wusbcore: fix deadlock in wusbhc_gtk_rekey 2013-12-02 15:21:04 -08:00
Kconfig usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs. 2013-08-12 12:18:38 -07:00
Makefile usb: patches for v3.12 merge window 2013-08-13 15:28:01 -07:00
README
usb-common.c usb: common: introduce of_usb_get_maximum_speed() 2013-07-29 13:56:46 +03:00
usb-skeleton.c USB: usb-skeleton.c: add retry for nonblocking read 2013-07-25 12:01:13 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.