alistair23-linux/drivers/usb/host/ehci-atmel.c
Alan Stern 1a49e2ac96 EHCI: centralize controller initialization
This patch (as1564c) converts the EHCI platform drivers to use the
central ehci_setup() routine for generic controller initialization
rather than each having its own idiosyncratic approach.

The major point of difficulty lies in ehci-pci's many vendor- and
device-specific workarounds.  Some of them have to be applied before
calling ehci_setup() and some after, which necessitates a fair amount
of code motion.  The other platform drivers require much smaller
changes.

One point not addressed by the patch is whether ports should be
powered on or off following initialization.  The different drivers
appear to handle this pretty much at random.  In fact it shouldn't
matter, because the hub driver turns on power to all ports when it
binds to the root hub.  Straightening that out will be left for
another day.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09 13:35:05 -07:00

242 lines
5.5 KiB
C

/*
* Driver for EHCI UHP on Atmel chips
*
* Copyright (C) 2009 Atmel Corporation,
* Nicolas Ferre <nicolas.ferre@atmel.com>
*
* Based on various ehci-*.c drivers
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_platform.h>
/* interface and function clocks */
static struct clk *iclk, *fclk;
static int clocked;
/*-------------------------------------------------------------------------*/
static void atmel_start_clock(void)
{
clk_enable(iclk);
clk_enable(fclk);
clocked = 1;
}
static void atmel_stop_clock(void)
{
clk_disable(fclk);
clk_disable(iclk);
clocked = 0;
}
static void atmel_start_ehci(struct platform_device *pdev)
{
dev_dbg(&pdev->dev, "start\n");
atmel_start_clock();
}
static void atmel_stop_ehci(struct platform_device *pdev)
{
dev_dbg(&pdev->dev, "stop\n");
atmel_stop_clock();
}
/*-------------------------------------------------------------------------*/
static int ehci_atmel_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
/* registers start at offset 0x0 */
ehci->caps = hcd->regs;
retval = ehci_setup(hcd);
if (retval)
return retval;
ehci_port_power(ehci, 0);
return retval;
}
static const struct hc_driver ehci_atmel_hc_driver = {
.description = hcd_name,
.product_desc = "Atmel EHCI UHP HS",
.hcd_priv_size = sizeof(struct ehci_hcd),
/* generic hardware linkage */
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
/* basic lifecycle operations */
.reset = ehci_atmel_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/* managing i/o requests and associated device resources */
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/* scheduling support */
.get_frame_number = ehci_get_frame,
/* root hub support */
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
const struct hc_driver *driver = &ehci_atmel_hc_driver;
struct resource *res;
int irq;
int retval;
if (usb_disabled())
return -ENODEV;
pr_debug("Initializing Atmel-SoC USB Host Controller\n");
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
dev_name(&pdev->dev));
retval = -ENODEV;
goto fail_create_hcd;
}
/* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &at91_ehci_dma_mask;
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
goto fail_create_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev,
"Found HC with no register addr. Check %s setup!\n",
dev_name(&pdev->dev));
retval = -ENODEV;
goto fail_request_resource;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
retval = -EBUSY;
goto fail_request_resource;
}
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&pdev->dev, "error mapping memory\n");
retval = -EFAULT;
goto fail_ioremap;
}
iclk = clk_get(&pdev->dev, "ehci_clk");
if (IS_ERR(iclk)) {
dev_err(&pdev->dev, "Error getting interface clock\n");
retval = -ENOENT;
goto fail_get_iclk;
}
fclk = clk_get(&pdev->dev, "uhpck");
if (IS_ERR(fclk)) {
dev_err(&pdev->dev, "Error getting function clock\n");
retval = -ENOENT;
goto fail_get_fclk;
}
atmel_start_ehci(pdev);
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (retval)
goto fail_add_hcd;
return retval;
fail_add_hcd:
atmel_stop_ehci(pdev);
clk_put(fclk);
fail_get_fclk:
clk_put(iclk);
fail_get_iclk:
iounmap(hcd->regs);
fail_ioremap:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
fail_request_resource:
usb_put_hcd(hcd);
fail_create_hcd:
dev_err(&pdev->dev, "init %s fail, %d\n",
dev_name(&pdev->dev), retval);
return retval;
}
static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
ehci_shutdown(hcd);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
atmel_stop_ehci(pdev);
clk_put(fclk);
clk_put(iclk);
fclk = iclk = NULL;
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id atmel_ehci_dt_ids[] = {
{ .compatible = "atmel,at91sam9g45-ehci" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_ehci_dt_ids);
#endif
static struct platform_driver ehci_atmel_driver = {
.probe = ehci_atmel_drv_probe,
.remove = __devexit_p(ehci_atmel_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "atmel-ehci",
.of_match_table = of_match_ptr(atmel_ehci_dt_ids),
},
};