redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/media/tuners/fc0012.c
Sakari Ailus bcb63314e2 [media] media: Drop FSF's postal address from the source code files 
Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.

The patch has been created with the following command without manual edits:

git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
	drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", <F>);
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
	&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2017-01-27 11:38:09 -02:00

514 lines
12 KiB
C
Raw Blame History

/*
* Fitipower FC0012 tuner driver
*
* Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "fc0012.h"
#include "fc0012-priv.h"
static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
{
u8 buf[2] = {reg, val};
struct i2c_msg msg = {
.addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
};
if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
dev_err(&priv->i2c->dev,
"%s: I2C write reg failed, reg: %02x, val: %02x\n",
KBUILD_MODNAME, reg, val);
return -EREMOTEIO;
}
return 0;
}
static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
{
struct i2c_msg msg[2] = {
{ .addr = priv->cfg->i2c_address, .flags = 0,
.buf = &reg, .len = 1 },
{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
.buf = val, .len = 1 },
};
if (i2c_transfer(priv->i2c, msg, 2) != 2) {
dev_err(&priv->i2c->dev,
"%s: I2C read reg failed, reg: %02x\n",
KBUILD_MODNAME, reg);
return -EREMOTEIO;
}
return 0;
}
static void fc0012_release(struct dvb_frontend *fe)
{
kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
}
static int fc0012_init(struct dvb_frontend *fe)
{
struct fc0012_priv *priv = fe->tuner_priv;
int i, ret = 0;
unsigned char reg[] = {
0x00, /* dummy reg. 0 */
0x05, /* reg. 0x01 */
0x10, /* reg. 0x02 */
0x00, /* reg. 0x03 */
0x00, /* reg. 0x04 */
0x0f, /* reg. 0x05: may also be 0x0a */
0x00, /* reg. 0x06: divider 2, VCO slow */
0x00, /* reg. 0x07: may also be 0x0f */
0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
Loop Bw 1/8 */
0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
0xb8, /* reg. 0x0a: Disable LO Test Buffer */
0x82, /* reg. 0x0b: Output Clock is same as clock frequency,
may also be 0x83 */
0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
0x00, /* reg. 0x0e */
0x00, /* reg. 0x0f */
0x00, /* reg. 0x10: may also be 0x0d */
0x00, /* reg. 0x11 */
0x1f, /* reg. 0x12: Set to maximum gain */
0x08, /* reg. 0x13: Set to Middle Gain: 0x08,
Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
0x00, /* reg. 0x14 */
0x04, /* reg. 0x15: Enable LNA COMPS */
};
switch (priv->cfg->xtal_freq) {
case FC_XTAL_27_MHZ:
case FC_XTAL_28_8_MHZ:
reg[0x07] |= 0x20;
break;
case FC_XTAL_36_MHZ:
default:
break;
}
if (priv->cfg->dual_master)
reg[0x0c] |= 0x02;
if (priv->cfg->loop_through)
reg[0x09] |= 0x01;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
for (i = 1; i < sizeof(reg); i++) {
ret = fc0012_writereg(priv, i, reg[i]);
if (ret)
break;
}
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (ret)
dev_err(&priv->i2c->dev, "%s: fc0012_writereg failed: %d\n",
KBUILD_MODNAME, ret);
return ret;
}
static int fc0012_set_params(struct dvb_frontend *fe)
{
struct fc0012_priv *priv = fe->tuner_priv;
int i, ret = 0;
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
u32 freq = p->frequency / 1000;
u32 delsys = p->delivery_system;
unsigned char reg[7], am, pm, multi, tmp;
unsigned long f_vco;
unsigned short xtal_freq_khz_2, xin, xdiv;
bool vco_select = false;
if (fe->callback) {
ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
if (ret)
goto exit;
}
switch (priv->cfg->xtal_freq) {
case FC_XTAL_27_MHZ:
xtal_freq_khz_2 = 27000 / 2;
break;
case FC_XTAL_36_MHZ:
xtal_freq_khz_2 = 36000 / 2;
break;
case FC_XTAL_28_8_MHZ:
default:
xtal_freq_khz_2 = 28800 / 2;
break;
}
/* select frequency divider and the frequency of VCO */
if (freq < 37084) { /* freq * 96 < 3560000 */
multi = 96;
reg[5] = 0x82;
reg[6] = 0x00;
} else if (freq < 55625) { /* freq * 64 < 3560000 */
multi = 64;
reg[5] = 0x82;
reg[6] = 0x02;
} else if (freq < 74167) { /* freq * 48 < 3560000 */
multi = 48;
reg[5] = 0x42;
reg[6] = 0x00;
} else if (freq < 111250) { /* freq * 32 < 3560000 */
multi = 32;
reg[5] = 0x42;
reg[6] = 0x02;
} else if (freq < 148334) { /* freq * 24 < 3560000 */
multi = 24;
reg[5] = 0x22;
reg[6] = 0x00;
} else if (freq < 222500) { /* freq * 16 < 3560000 */
multi = 16;
reg[5] = 0x22;
reg[6] = 0x02;
} else if (freq < 296667) { /* freq * 12 < 3560000 */
multi = 12;
reg[5] = 0x12;
reg[6] = 0x00;
} else if (freq < 445000) { /* freq * 8 < 3560000 */
multi = 8;
reg[5] = 0x12;
reg[6] = 0x02;
} else if (freq < 593334) { /* freq * 6 < 3560000 */
multi = 6;
reg[5] = 0x0a;
reg[6] = 0x00;
} else {
multi = 4;
reg[5] = 0x0a;
reg[6] = 0x02;
}
f_vco = freq * multi;
if (f_vco >= 3060000) {
reg[6] |= 0x08;
vco_select = true;
}
if (freq >= 45000) {
/* From divided value (XDIV) determined the FA and FP value */
xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
xdiv++;
pm = (unsigned char)(xdiv / 8);
am = (unsigned char)(xdiv - (8 * pm));
if (am < 2) {
reg[1] = am + 8;
reg[2] = pm - 1;
} else {
reg[1] = am;
reg[2] = pm;
}
} else {
/* fix for frequency less than 45 MHz */
reg[1] = 0x06;
reg[2] = 0x11;
}
/* fix clock out */
reg[6] |= 0x20;
/* From VCO frequency determines the XIN ( fractional part of Delta
Sigma PLL) and divided value (XDIV) */
xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
xin = (xin << 15) / xtal_freq_khz_2;
if (xin >= 16384)
xin += 32768;
reg[3] = xin >> 8; /* xin with 9 bit resolution */
reg[4] = xin & 0xff;
if (delsys == SYS_DVBT) {
reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
switch (p->bandwidth_hz) {
case 6000000:
reg[6] |= 0x80;
break;
case 7000000:
reg[6] |= 0x40;
break;
case 8000000:
default:
break;
}
} else {
dev_err(&priv->i2c->dev, "%s: modulation type not supported!\n",
KBUILD_MODNAME);
return -EINVAL;
}
/* modified for Realtek demod */
reg[5] |= 0x07;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
for (i = 1; i <= 6; i++) {
ret = fc0012_writereg(priv, i, reg[i]);
if (ret)
goto exit;
}
/* VCO Calibration */
ret = fc0012_writereg(priv, 0x0e, 0x80);
if (!ret)
ret = fc0012_writereg(priv, 0x0e, 0x00);
/* VCO Re-Calibration if needed */
if (!ret)
ret = fc0012_writereg(priv, 0x0e, 0x00);
if (!ret) {
msleep(10);
ret = fc0012_readreg(priv, 0x0e, &tmp);
}
if (ret)
goto exit;
/* vco selection */
tmp &= 0x3f;
if (vco_select) {
if (tmp > 0x3c) {
reg[6] &= ~0x08;
ret = fc0012_writereg(priv, 0x06, reg[6]);
if (!ret)
ret = fc0012_writereg(priv, 0x0e, 0x80);
if (!ret)
ret = fc0012_writereg(priv, 0x0e, 0x00);
}
} else {
if (tmp < 0x02) {
reg[6] |= 0x08;
ret = fc0012_writereg(priv, 0x06, reg[6]);
if (!ret)
ret = fc0012_writereg(priv, 0x0e, 0x80);
if (!ret)
ret = fc0012_writereg(priv, 0x0e, 0x00);
}
}
priv->frequency = p->frequency;
priv->bandwidth = p->bandwidth_hz;
exit:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (ret)
dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
KBUILD_MODNAME, __func__, ret);
return ret;
}
static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct fc0012_priv *priv = fe->tuner_priv;
*frequency = priv->frequency;
return 0;
}
static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
*frequency = 0; /* Zero-IF */
return 0;
}
static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
{
struct fc0012_priv *priv = fe->tuner_priv;
*bandwidth = priv->bandwidth;
return 0;
}
#define INPUT_ADC_LEVEL -8
static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
{
struct fc0012_priv *priv = fe->tuner_priv;
int ret;
unsigned char tmp;
int int_temp, lna_gain, int_lna, tot_agc_gain, power;
const int fc0012_lna_gain_table[] = {
/* low gain */
-63, -58, -99, -73,
-63, -65, -54, -60,
/* middle gain */
71, 70, 68, 67,
65, 63, 61, 58,
/* high gain */
197, 191, 188, 186,
184, 182, 181, 179,
};
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
ret = fc0012_writereg(priv, 0x12, 0x00);
if (ret)
goto err;
ret = fc0012_readreg(priv, 0x12, &tmp);
if (ret)
goto err;
int_temp = tmp;
ret = fc0012_readreg(priv, 0x13, &tmp);
if (ret)
goto err;
lna_gain = tmp & 0x1f;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) {
int_lna = fc0012_lna_gain_table[lna_gain];
tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
(int_temp & 0x1f)) * 2;
power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
if (power >= 45)
*strength = 255; /* 100% */
else if (power < -95)
*strength = 0;
else
*strength = (power + 95) * 255 / 140;
*strength |= *strength << 8;
} else {
ret = -1;
}
goto exit;
err:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
exit:
if (ret)
dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
KBUILD_MODNAME, __func__, ret);
return ret;
}
static const struct dvb_tuner_ops fc0012_tuner_ops = {
.info = {
.name = "Fitipower FC0012",
.frequency_min = 37000000, /* estimate */
.frequency_max = 862000000, /* estimate */
.frequency_step = 0,
},
.release = fc0012_release,
.init = fc0012_init,
.set_params = fc0012_set_params,
.get_frequency = fc0012_get_frequency,
.get_if_frequency = fc0012_get_if_frequency,
.get_bandwidth = fc0012_get_bandwidth,
.get_rf_strength = fc0012_get_rf_strength,
};
struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c, const struct fc0012_config *cfg)
{
struct fc0012_priv *priv;
int ret;
u8 chip_id;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
goto err;
}
priv->cfg = cfg;
priv->i2c = i2c;
/* check if the tuner is there */
ret = fc0012_readreg(priv, 0x00, &chip_id);
if (ret < 0)
goto err;
dev_dbg(&i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id);
switch (chip_id) {
case 0xa1:
break;
default:
ret = -ENODEV;
goto err;
}
dev_info(&i2c->dev, "%s: Fitipower FC0012 successfully identified\n",
KBUILD_MODNAME);
if (priv->cfg->loop_through) {
ret = fc0012_writereg(priv, 0x09, 0x6f);
if (ret < 0)
goto err;
}
/*
* TODO: Clock out en or div?
* For dual tuner configuration clearing bit [0] is required.
*/
if (priv->cfg->clock_out) {
ret = fc0012_writereg(priv, 0x0b, 0x82);
if (ret < 0)
goto err;
}
fe->tuner_priv = priv;
memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
sizeof(struct dvb_tuner_ops));
err:
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
if (ret) {
dev_dbg(&i2c->dev, "%s: failed: %d\n", __func__, ret);
kfree(priv);
return NULL;
}
return fe;
}
EXPORT_SYMBOL(fc0012_attach);
MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.6");
View git blame Copy permalink