![Satoshi Nagahama](/assets/img/avatar_default.png)
PX-BCUD has the following components: USB interface: Empia EM28178 Demodulator: Toshiba TC90532 (works by code for TC90522) Tuner: Next version of Sharp QM1D1C0042 em28xx_dvb_init(): add init code for PLEX PX-BCUD with calling px_bcud_init() that does things like pin configuration. qm1d1c0042_init(): support the next version of QM1D1C0042, change to choose an appropriate array of initial registers by reading chip id. [mchehab@osg.samsung.com: fold a fixup patch and fix checkpatch.pl errors/warnings, where applicable] Signed-off-by: Satoshi Nagahama <sattnag@aim.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
465 lines
11 KiB
C
465 lines
11 KiB
C
/*
|
|
* Sharp QM1D1C0042 8PSK tuner driver
|
|
*
|
|
* Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* NOTICE:
|
|
* As the disclosed information on the chip is very limited,
|
|
* this driver lacks some features, including chip config like IF freq.
|
|
* It assumes that users of this driver (such as a PCI bridge of
|
|
* DTV receiver cards) know the relevant info and
|
|
* configure the chip via I2C if necessary.
|
|
*
|
|
* Currently, PT3 driver is the only one that uses this driver,
|
|
* and contains init/config code in its firmware.
|
|
* Thus some part of the code might be dependent on PT3 specific config.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/math64.h>
|
|
#include "qm1d1c0042.h"
|
|
|
|
#define QM1D1C0042_NUM_REGS 0x20
|
|
#define QM1D1C0042_NUM_REG_ROWS 2
|
|
|
|
static const u8
|
|
reg_initval[QM1D1C0042_NUM_REG_ROWS][QM1D1C0042_NUM_REGS] = { {
|
|
0x48, 0x1c, 0xa0, 0x10, 0xbc, 0xc5, 0x20, 0x33,
|
|
0x06, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
|
|
0x00, 0xff, 0xf3, 0x00, 0x2a, 0x64, 0xa6, 0x86,
|
|
0x8c, 0xcf, 0xb8, 0xf1, 0xa8, 0xf2, 0x89, 0x00
|
|
}, {
|
|
0x68, 0x1c, 0xc0, 0x10, 0xbc, 0xc1, 0x11, 0x33,
|
|
0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
|
|
0x00, 0xff, 0xf3, 0x00, 0x3f, 0x25, 0x5c, 0xd6,
|
|
0x55, 0xcf, 0x95, 0xf6, 0x36, 0xf2, 0x09, 0x00
|
|
}
|
|
};
|
|
|
|
static int reg_index;
|
|
|
|
static const struct qm1d1c0042_config default_cfg = {
|
|
.xtal_freq = 16000,
|
|
.lpf = 1,
|
|
.fast_srch = 0,
|
|
.lpf_wait = 20,
|
|
.fast_srch_wait = 4,
|
|
.normal_srch_wait = 15,
|
|
};
|
|
|
|
struct qm1d1c0042_state {
|
|
struct qm1d1c0042_config cfg;
|
|
struct i2c_client *i2c;
|
|
u8 regs[QM1D1C0042_NUM_REGS];
|
|
};
|
|
|
|
static struct qm1d1c0042_state *cfg_to_state(struct qm1d1c0042_config *c)
|
|
{
|
|
return container_of(c, struct qm1d1c0042_state, cfg);
|
|
}
|
|
|
|
static int reg_write(struct qm1d1c0042_state *state, u8 reg, u8 val)
|
|
{
|
|
u8 wbuf[2] = { reg, val };
|
|
int ret;
|
|
|
|
ret = i2c_master_send(state->i2c, wbuf, sizeof(wbuf));
|
|
if (ret >= 0 && ret < sizeof(wbuf))
|
|
ret = -EIO;
|
|
return (ret == sizeof(wbuf)) ? 0 : ret;
|
|
}
|
|
|
|
static int reg_read(struct qm1d1c0042_state *state, u8 reg, u8 *val)
|
|
{
|
|
struct i2c_msg msgs[2] = {
|
|
{
|
|
.addr = state->i2c->addr,
|
|
.flags = 0,
|
|
.buf = ®,
|
|
.len = 1,
|
|
},
|
|
{
|
|
.addr = state->i2c->addr,
|
|
.flags = I2C_M_RD,
|
|
.buf = val,
|
|
.len = 1,
|
|
},
|
|
};
|
|
int ret;
|
|
|
|
ret = i2c_transfer(state->i2c->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret >= 0 && ret < ARRAY_SIZE(msgs))
|
|
ret = -EIO;
|
|
return (ret == ARRAY_SIZE(msgs)) ? 0 : ret;
|
|
}
|
|
|
|
|
|
static int qm1d1c0042_set_srch_mode(struct qm1d1c0042_state *state, bool fast)
|
|
{
|
|
if (fast)
|
|
state->regs[0x03] |= 0x01; /* set fast search mode */
|
|
else
|
|
state->regs[0x03] &= ~0x01 & 0xff;
|
|
|
|
return reg_write(state, 0x03, state->regs[0x03]);
|
|
}
|
|
|
|
static int qm1d1c0042_wakeup(struct qm1d1c0042_state *state)
|
|
{
|
|
int ret;
|
|
|
|
state->regs[0x01] |= 1 << 3; /* BB_Reg_enable */
|
|
state->regs[0x01] &= (~(1 << 0)) & 0xff; /* NORMAL (wake-up) */
|
|
state->regs[0x05] &= (~(1 << 3)) & 0xff; /* pfd_rst NORMAL */
|
|
ret = reg_write(state, 0x01, state->regs[0x01]);
|
|
if (ret == 0)
|
|
ret = reg_write(state, 0x05, state->regs[0x05]);
|
|
|
|
if (ret < 0)
|
|
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, state->cfg.fe->dvb->num, state->cfg.fe->id);
|
|
return ret;
|
|
}
|
|
|
|
/* tuner_ops */
|
|
|
|
static int qm1d1c0042_set_config(struct dvb_frontend *fe, void *priv_cfg)
|
|
{
|
|
struct qm1d1c0042_state *state;
|
|
struct qm1d1c0042_config *cfg;
|
|
|
|
state = fe->tuner_priv;
|
|
cfg = priv_cfg;
|
|
|
|
if (cfg->fe)
|
|
state->cfg.fe = cfg->fe;
|
|
|
|
if (cfg->xtal_freq != QM1D1C0042_CFG_XTAL_DFLT)
|
|
dev_warn(&state->i2c->dev,
|
|
"(%s) changing xtal_freq not supported. ", __func__);
|
|
state->cfg.xtal_freq = default_cfg.xtal_freq;
|
|
|
|
state->cfg.lpf = cfg->lpf;
|
|
state->cfg.fast_srch = cfg->fast_srch;
|
|
|
|
if (cfg->lpf_wait != QM1D1C0042_CFG_WAIT_DFLT)
|
|
state->cfg.lpf_wait = cfg->lpf_wait;
|
|
else
|
|
state->cfg.lpf_wait = default_cfg.lpf_wait;
|
|
|
|
if (cfg->fast_srch_wait != QM1D1C0042_CFG_WAIT_DFLT)
|
|
state->cfg.fast_srch_wait = cfg->fast_srch_wait;
|
|
else
|
|
state->cfg.fast_srch_wait = default_cfg.fast_srch_wait;
|
|
|
|
if (cfg->normal_srch_wait != QM1D1C0042_CFG_WAIT_DFLT)
|
|
state->cfg.normal_srch_wait = cfg->normal_srch_wait;
|
|
else
|
|
state->cfg.normal_srch_wait = default_cfg.normal_srch_wait;
|
|
return 0;
|
|
}
|
|
|
|
/* divisor, vco_band parameters */
|
|
/* {maxfreq, param1(band?), param2(div?) */
|
|
static const u32 conv_table[9][3] = {
|
|
{ 2151000, 1, 7 },
|
|
{ 1950000, 1, 6 },
|
|
{ 1800000, 1, 5 },
|
|
{ 1600000, 1, 4 },
|
|
{ 1450000, 1, 3 },
|
|
{ 1250000, 1, 2 },
|
|
{ 1200000, 0, 7 },
|
|
{ 975000, 0, 6 },
|
|
{ 950000, 0, 0 }
|
|
};
|
|
|
|
static int qm1d1c0042_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct qm1d1c0042_state *state;
|
|
u32 freq;
|
|
int i, ret;
|
|
u8 val, mask;
|
|
u32 a, sd;
|
|
s32 b;
|
|
|
|
state = fe->tuner_priv;
|
|
freq = fe->dtv_property_cache.frequency;
|
|
|
|
state->regs[0x08] &= 0xf0;
|
|
state->regs[0x08] |= 0x09;
|
|
|
|
state->regs[0x13] &= 0x9f;
|
|
state->regs[0x13] |= 0x20;
|
|
|
|
/* div2/vco_band */
|
|
val = state->regs[0x02] & 0x0f;
|
|
for (i = 0; i < 8; i++)
|
|
if (freq < conv_table[i][0] && freq >= conv_table[i + 1][0]) {
|
|
val |= conv_table[i][1] << 7;
|
|
val |= conv_table[i][2] << 4;
|
|
break;
|
|
}
|
|
ret = reg_write(state, 0x02, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
a = (freq + state->cfg.xtal_freq / 2) / state->cfg.xtal_freq;
|
|
|
|
state->regs[0x06] &= 0x40;
|
|
state->regs[0x06] |= (a - 12) / 4;
|
|
ret = reg_write(state, 0x06, state->regs[0x06]);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
state->regs[0x07] &= 0xf0;
|
|
state->regs[0x07] |= (a - 4 * ((a - 12) / 4 + 1) - 5) & 0x0f;
|
|
ret = reg_write(state, 0x07, state->regs[0x07]);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* LPF */
|
|
val = state->regs[0x08];
|
|
if (state->cfg.lpf) {
|
|
/* LPF_CLK, LPF_FC */
|
|
val &= 0xf0;
|
|
val |= 0x02;
|
|
}
|
|
ret = reg_write(state, 0x08, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* b = (freq / state->cfg.xtal_freq - a) << 20;
|
|
* sd = b (b >= 0)
|
|
* 1<<22 + b (b < 0)
|
|
*/
|
|
b = (s32)div64_s64(((s64) freq) << 20, state->cfg.xtal_freq)
|
|
- (((s64) a) << 20);
|
|
|
|
if (b >= 0)
|
|
sd = b;
|
|
else
|
|
sd = (1 << 22) + b;
|
|
|
|
state->regs[0x09] &= 0xc0;
|
|
state->regs[0x09] |= (sd >> 16) & 0x3f;
|
|
state->regs[0x0a] = (sd >> 8) & 0xff;
|
|
state->regs[0x0b] = sd & 0xff;
|
|
ret = reg_write(state, 0x09, state->regs[0x09]);
|
|
if (ret == 0)
|
|
ret = reg_write(state, 0x0a, state->regs[0x0a]);
|
|
if (ret == 0)
|
|
ret = reg_write(state, 0x0b, state->regs[0x0b]);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (!state->cfg.lpf) {
|
|
/* CSEL_Offset */
|
|
ret = reg_write(state, 0x13, state->regs[0x13]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* VCO_TM, LPF_TM */
|
|
mask = state->cfg.lpf ? 0x3f : 0x7f;
|
|
val = state->regs[0x0c] & mask;
|
|
ret = reg_write(state, 0x0c, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(2000, 3000);
|
|
val = state->regs[0x0c] | ~mask;
|
|
ret = reg_write(state, 0x0c, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (state->cfg.lpf)
|
|
msleep(state->cfg.lpf_wait);
|
|
else if (state->regs[0x03] & 0x01)
|
|
msleep(state->cfg.fast_srch_wait);
|
|
else
|
|
msleep(state->cfg.normal_srch_wait);
|
|
|
|
if (state->cfg.lpf) {
|
|
/* LPF_FC */
|
|
ret = reg_write(state, 0x08, 0x09);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* CSEL_Offset */
|
|
ret = reg_write(state, 0x13, state->regs[0x13]);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int qm1d1c0042_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct qm1d1c0042_state *state;
|
|
int ret;
|
|
|
|
state = fe->tuner_priv;
|
|
state->regs[0x01] &= (~(1 << 3)) & 0xff; /* BB_Reg_disable */
|
|
state->regs[0x01] |= 1 << 0; /* STDBY */
|
|
state->regs[0x05] |= 1 << 3; /* pfd_rst STANDBY */
|
|
ret = reg_write(state, 0x05, state->regs[0x05]);
|
|
if (ret == 0)
|
|
ret = reg_write(state, 0x01, state->regs[0x01]);
|
|
if (ret < 0)
|
|
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
static int qm1d1c0042_init(struct dvb_frontend *fe)
|
|
{
|
|
struct qm1d1c0042_state *state;
|
|
u8 val;
|
|
int i, ret;
|
|
|
|
state = fe->tuner_priv;
|
|
|
|
reg_write(state, 0x01, 0x0c);
|
|
reg_write(state, 0x01, 0x0c);
|
|
|
|
ret = reg_write(state, 0x01, 0x0c); /* soft reset on */
|
|
if (ret < 0)
|
|
goto failed;
|
|
usleep_range(2000, 3000);
|
|
|
|
ret = reg_write(state, 0x01, 0x1c); /* soft reset off */
|
|
if (ret < 0)
|
|
goto failed;
|
|
|
|
/* check ID and choose initial registers corresponding ID */
|
|
ret = reg_read(state, 0x00, &val);
|
|
if (ret < 0)
|
|
goto failed;
|
|
for (reg_index = 0; reg_index < QM1D1C0042_NUM_REG_ROWS;
|
|
reg_index++) {
|
|
if (val == reg_initval[reg_index][0x00])
|
|
break;
|
|
}
|
|
if (reg_index >= QM1D1C0042_NUM_REG_ROWS)
|
|
goto failed;
|
|
memcpy(state->regs, reg_initval[reg_index], QM1D1C0042_NUM_REGS);
|
|
usleep_range(2000, 3000);
|
|
|
|
state->regs[0x0c] |= 0x40;
|
|
ret = reg_write(state, 0x0c, state->regs[0x0c]);
|
|
if (ret < 0)
|
|
goto failed;
|
|
msleep(state->cfg.lpf_wait);
|
|
|
|
/* set all writable registers */
|
|
for (i = 1; i <= 0x0c ; i++) {
|
|
ret = reg_write(state, i, state->regs[i]);
|
|
if (ret < 0)
|
|
goto failed;
|
|
}
|
|
for (i = 0x11; i < QM1D1C0042_NUM_REGS; i++) {
|
|
ret = reg_write(state, i, state->regs[i]);
|
|
if (ret < 0)
|
|
goto failed;
|
|
}
|
|
|
|
ret = qm1d1c0042_wakeup(state);
|
|
if (ret < 0)
|
|
goto failed;
|
|
|
|
ret = qm1d1c0042_set_srch_mode(state, state->cfg.fast_srch);
|
|
if (ret < 0)
|
|
goto failed;
|
|
|
|
return ret;
|
|
|
|
failed:
|
|
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
|
|
__func__, fe->dvb->num, fe->id);
|
|
return ret;
|
|
}
|
|
|
|
/* I2C driver functions */
|
|
|
|
static const struct dvb_tuner_ops qm1d1c0042_ops = {
|
|
.info = {
|
|
.name = "Sharp QM1D1C0042",
|
|
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
},
|
|
|
|
.init = qm1d1c0042_init,
|
|
.sleep = qm1d1c0042_sleep,
|
|
.set_config = qm1d1c0042_set_config,
|
|
.set_params = qm1d1c0042_set_params,
|
|
};
|
|
|
|
|
|
static int qm1d1c0042_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct qm1d1c0042_state *state;
|
|
struct qm1d1c0042_config *cfg;
|
|
struct dvb_frontend *fe;
|
|
|
|
state = kzalloc(sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
state->i2c = client;
|
|
|
|
cfg = client->dev.platform_data;
|
|
fe = cfg->fe;
|
|
fe->tuner_priv = state;
|
|
qm1d1c0042_set_config(fe, cfg);
|
|
memcpy(&fe->ops.tuner_ops, &qm1d1c0042_ops, sizeof(qm1d1c0042_ops));
|
|
|
|
i2c_set_clientdata(client, &state->cfg);
|
|
dev_info(&client->dev, "Sharp QM1D1C0042 attached.\n");
|
|
return 0;
|
|
}
|
|
|
|
static int qm1d1c0042_remove(struct i2c_client *client)
|
|
{
|
|
struct qm1d1c0042_state *state;
|
|
|
|
state = cfg_to_state(i2c_get_clientdata(client));
|
|
state->cfg.fe->tuner_priv = NULL;
|
|
kfree(state);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct i2c_device_id qm1d1c0042_id[] = {
|
|
{"qm1d1c0042", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, qm1d1c0042_id);
|
|
|
|
static struct i2c_driver qm1d1c0042_driver = {
|
|
.driver = {
|
|
.name = "qm1d1c0042",
|
|
},
|
|
.probe = qm1d1c0042_probe,
|
|
.remove = qm1d1c0042_remove,
|
|
.id_table = qm1d1c0042_id,
|
|
};
|
|
|
|
module_i2c_driver(qm1d1c0042_driver);
|
|
|
|
MODULE_DESCRIPTION("Sharp QM1D1C0042 tuner");
|
|
MODULE_AUTHOR("Akihiro TSUKADA");
|
|
MODULE_LICENSE("GPL");
|