![Krzysztof Kozlowski](/assets/img/avatar_default.png)
The driver registered for CPU frequency transitions to recalculate its clock when ARM clock frequency changes (ratio between frequencies of ARM's parent clock (fclk) and clock for peripherals remains fixed). This is needed only on S3C24xx platform when cpufreq driver is enabled so limit the ifdef to respective cpufreq Kconfig. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
1145 lines
28 KiB
C
1145 lines
28 KiB
C
/* linux/drivers/video/s3c2410fb.c
|
|
* Copyright (c) 2004,2005 Arnaud Patard
|
|
* Copyright (c) 2004-2008 Ben Dooks
|
|
*
|
|
* S3C2410 LCD Framebuffer Driver
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*
|
|
* Driver based on skeletonfb.c, sa1100fb.c and others.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
#include <mach/regs-lcd.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/fb.h>
|
|
|
|
#ifdef CONFIG_PM
|
|
#include <linux/pm.h>
|
|
#endif
|
|
|
|
#include "s3c2410fb.h"
|
|
|
|
/* Debugging stuff */
|
|
#ifdef CONFIG_FB_S3C2410_DEBUG
|
|
static int debug = 1;
|
|
#else
|
|
static int debug;
|
|
#endif
|
|
|
|
#define dprintk(msg...) \
|
|
do { \
|
|
if (debug) \
|
|
pr_debug(msg); \
|
|
} while (0)
|
|
|
|
/* useful functions */
|
|
|
|
static int is_s3c2412(struct s3c2410fb_info *fbi)
|
|
{
|
|
return (fbi->drv_type == DRV_S3C2412);
|
|
}
|
|
|
|
/* s3c2410fb_set_lcdaddr
|
|
*
|
|
* initialise lcd controller address pointers
|
|
*/
|
|
static void s3c2410fb_set_lcdaddr(struct fb_info *info)
|
|
{
|
|
unsigned long saddr1, saddr2, saddr3;
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
void __iomem *regs = fbi->io;
|
|
|
|
saddr1 = info->fix.smem_start >> 1;
|
|
saddr2 = info->fix.smem_start;
|
|
saddr2 += info->fix.line_length * info->var.yres;
|
|
saddr2 >>= 1;
|
|
|
|
saddr3 = S3C2410_OFFSIZE(0) |
|
|
S3C2410_PAGEWIDTH((info->fix.line_length / 2) & 0x3ff);
|
|
|
|
dprintk("LCDSADDR1 = 0x%08lx\n", saddr1);
|
|
dprintk("LCDSADDR2 = 0x%08lx\n", saddr2);
|
|
dprintk("LCDSADDR3 = 0x%08lx\n", saddr3);
|
|
|
|
writel(saddr1, regs + S3C2410_LCDSADDR1);
|
|
writel(saddr2, regs + S3C2410_LCDSADDR2);
|
|
writel(saddr3, regs + S3C2410_LCDSADDR3);
|
|
}
|
|
|
|
/* s3c2410fb_calc_pixclk()
|
|
*
|
|
* calculate divisor for clk->pixclk
|
|
*/
|
|
static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
|
|
unsigned long pixclk)
|
|
{
|
|
unsigned long clk = fbi->clk_rate;
|
|
unsigned long long div;
|
|
|
|
/* pixclk is in picoseconds, our clock is in Hz
|
|
*
|
|
* Hz -> picoseconds is / 10^-12
|
|
*/
|
|
|
|
div = (unsigned long long)clk * pixclk;
|
|
div >>= 12; /* div / 2^12 */
|
|
do_div(div, 625 * 625UL * 625); /* div / 5^12 */
|
|
|
|
dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div);
|
|
return div;
|
|
}
|
|
|
|
/*
|
|
* s3c2410fb_check_var():
|
|
* Get the video params out of 'var'. If a value doesn't fit, round it up,
|
|
* if it's too big, return -EINVAL.
|
|
*
|
|
*/
|
|
static int s3c2410fb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
struct s3c2410fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
|
|
struct s3c2410fb_display *display = NULL;
|
|
struct s3c2410fb_display *default_display = mach_info->displays +
|
|
mach_info->default_display;
|
|
int type = default_display->type;
|
|
unsigned i;
|
|
|
|
dprintk("check_var(var=%p, info=%p)\n", var, info);
|
|
|
|
/* validate x/y resolution */
|
|
/* choose default mode if possible */
|
|
if (var->yres == default_display->yres &&
|
|
var->xres == default_display->xres &&
|
|
var->bits_per_pixel == default_display->bpp)
|
|
display = default_display;
|
|
else
|
|
for (i = 0; i < mach_info->num_displays; i++)
|
|
if (type == mach_info->displays[i].type &&
|
|
var->yres == mach_info->displays[i].yres &&
|
|
var->xres == mach_info->displays[i].xres &&
|
|
var->bits_per_pixel == mach_info->displays[i].bpp) {
|
|
display = mach_info->displays + i;
|
|
break;
|
|
}
|
|
|
|
if (!display) {
|
|
dprintk("wrong resolution or depth %dx%d at %d bpp\n",
|
|
var->xres, var->yres, var->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* it is always the size as the display */
|
|
var->xres_virtual = display->xres;
|
|
var->yres_virtual = display->yres;
|
|
var->height = display->height;
|
|
var->width = display->width;
|
|
|
|
/* copy lcd settings */
|
|
var->pixclock = display->pixclock;
|
|
var->left_margin = display->left_margin;
|
|
var->right_margin = display->right_margin;
|
|
var->upper_margin = display->upper_margin;
|
|
var->lower_margin = display->lower_margin;
|
|
var->vsync_len = display->vsync_len;
|
|
var->hsync_len = display->hsync_len;
|
|
|
|
fbi->regs.lcdcon5 = display->lcdcon5;
|
|
/* set display type */
|
|
fbi->regs.lcdcon1 = display->type;
|
|
|
|
var->transp.offset = 0;
|
|
var->transp.length = 0;
|
|
/* set r/g/b positions */
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
case 2:
|
|
case 4:
|
|
var->red.offset = 0;
|
|
var->red.length = var->bits_per_pixel;
|
|
var->green = var->red;
|
|
var->blue = var->red;
|
|
break;
|
|
case 8:
|
|
if (display->type != S3C2410_LCDCON1_TFT) {
|
|
/* 8 bpp 332 */
|
|
var->red.length = 3;
|
|
var->red.offset = 5;
|
|
var->green.length = 3;
|
|
var->green.offset = 2;
|
|
var->blue.length = 2;
|
|
var->blue.offset = 0;
|
|
} else {
|
|
var->red.offset = 0;
|
|
var->red.length = 8;
|
|
var->green = var->red;
|
|
var->blue = var->red;
|
|
}
|
|
break;
|
|
case 12:
|
|
/* 12 bpp 444 */
|
|
var->red.length = 4;
|
|
var->red.offset = 8;
|
|
var->green.length = 4;
|
|
var->green.offset = 4;
|
|
var->blue.length = 4;
|
|
var->blue.offset = 0;
|
|
break;
|
|
|
|
default:
|
|
case 16:
|
|
if (display->lcdcon5 & S3C2410_LCDCON5_FRM565) {
|
|
/* 16 bpp, 565 format */
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.length = 6;
|
|
var->blue.length = 5;
|
|
} else {
|
|
/* 16 bpp, 5551 format */
|
|
var->red.offset = 11;
|
|
var->green.offset = 6;
|
|
var->blue.offset = 1;
|
|
var->red.length = 5;
|
|
var->green.length = 5;
|
|
var->blue.length = 5;
|
|
}
|
|
break;
|
|
case 32:
|
|
/* 24 bpp 888 and 8 dummy */
|
|
var->red.length = 8;
|
|
var->red.offset = 16;
|
|
var->green.length = 8;
|
|
var->green.offset = 8;
|
|
var->blue.length = 8;
|
|
var->blue.offset = 0;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* s3c2410fb_calculate_stn_lcd_regs
|
|
*
|
|
* calculate register values from var settings
|
|
*/
|
|
static void s3c2410fb_calculate_stn_lcd_regs(const struct fb_info *info,
|
|
struct s3c2410fb_hw *regs)
|
|
{
|
|
const struct s3c2410fb_info *fbi = info->par;
|
|
const struct fb_var_screeninfo *var = &info->var;
|
|
int type = regs->lcdcon1 & ~S3C2410_LCDCON1_TFT;
|
|
int hs = var->xres >> 2;
|
|
unsigned wdly = (var->left_margin >> 4) - 1;
|
|
unsigned wlh = (var->hsync_len >> 4) - 1;
|
|
|
|
if (type != S3C2410_LCDCON1_STN4)
|
|
hs >>= 1;
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_STN1BPP;
|
|
break;
|
|
case 2:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_STN2GREY;
|
|
break;
|
|
case 4:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_STN4GREY;
|
|
break;
|
|
case 8:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_STN8BPP;
|
|
hs *= 3;
|
|
break;
|
|
case 12:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_STN12BPP;
|
|
hs *= 3;
|
|
break;
|
|
|
|
default:
|
|
/* invalid pixel depth */
|
|
dev_err(fbi->dev, "invalid bpp %d\n",
|
|
var->bits_per_pixel);
|
|
}
|
|
/* update X/Y info */
|
|
dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
|
|
var->left_margin, var->right_margin, var->hsync_len);
|
|
|
|
regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1);
|
|
|
|
if (wdly > 3)
|
|
wdly = 3;
|
|
|
|
if (wlh > 3)
|
|
wlh = 3;
|
|
|
|
regs->lcdcon3 = S3C2410_LCDCON3_WDLY(wdly) |
|
|
S3C2410_LCDCON3_LINEBLANK(var->right_margin / 8) |
|
|
S3C2410_LCDCON3_HOZVAL(hs - 1);
|
|
|
|
regs->lcdcon4 = S3C2410_LCDCON4_WLH(wlh);
|
|
}
|
|
|
|
/* s3c2410fb_calculate_tft_lcd_regs
|
|
*
|
|
* calculate register values from var settings
|
|
*/
|
|
static void s3c2410fb_calculate_tft_lcd_regs(const struct fb_info *info,
|
|
struct s3c2410fb_hw *regs)
|
|
{
|
|
const struct s3c2410fb_info *fbi = info->par;
|
|
const struct fb_var_screeninfo *var = &info->var;
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_TFT1BPP;
|
|
break;
|
|
case 2:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_TFT2BPP;
|
|
break;
|
|
case 4:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_TFT4BPP;
|
|
break;
|
|
case 8:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
|
|
regs->lcdcon5 |= S3C2410_LCDCON5_BSWP |
|
|
S3C2410_LCDCON5_FRM565;
|
|
regs->lcdcon5 &= ~S3C2410_LCDCON5_HWSWP;
|
|
break;
|
|
case 16:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
|
|
regs->lcdcon5 &= ~S3C2410_LCDCON5_BSWP;
|
|
regs->lcdcon5 |= S3C2410_LCDCON5_HWSWP;
|
|
break;
|
|
case 32:
|
|
regs->lcdcon1 |= S3C2410_LCDCON1_TFT24BPP;
|
|
regs->lcdcon5 &= ~(S3C2410_LCDCON5_BSWP |
|
|
S3C2410_LCDCON5_HWSWP |
|
|
S3C2410_LCDCON5_BPP24BL);
|
|
break;
|
|
default:
|
|
/* invalid pixel depth */
|
|
dev_err(fbi->dev, "invalid bpp %d\n",
|
|
var->bits_per_pixel);
|
|
}
|
|
/* update X/Y info */
|
|
dprintk("setting vert: up=%d, low=%d, sync=%d\n",
|
|
var->upper_margin, var->lower_margin, var->vsync_len);
|
|
|
|
dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
|
|
var->left_margin, var->right_margin, var->hsync_len);
|
|
|
|
regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1) |
|
|
S3C2410_LCDCON2_VBPD(var->upper_margin - 1) |
|
|
S3C2410_LCDCON2_VFPD(var->lower_margin - 1) |
|
|
S3C2410_LCDCON2_VSPW(var->vsync_len - 1);
|
|
|
|
regs->lcdcon3 = S3C2410_LCDCON3_HBPD(var->right_margin - 1) |
|
|
S3C2410_LCDCON3_HFPD(var->left_margin - 1) |
|
|
S3C2410_LCDCON3_HOZVAL(var->xres - 1);
|
|
|
|
regs->lcdcon4 = S3C2410_LCDCON4_HSPW(var->hsync_len - 1);
|
|
}
|
|
|
|
/* s3c2410fb_activate_var
|
|
*
|
|
* activate (set) the controller from the given framebuffer
|
|
* information
|
|
*/
|
|
static void s3c2410fb_activate_var(struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
void __iomem *regs = fbi->io;
|
|
int type = fbi->regs.lcdcon1 & S3C2410_LCDCON1_TFT;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int clkdiv;
|
|
|
|
clkdiv = DIV_ROUND_UP(s3c2410fb_calc_pixclk(fbi, var->pixclock), 2);
|
|
|
|
dprintk("%s: var->xres = %d\n", __func__, var->xres);
|
|
dprintk("%s: var->yres = %d\n", __func__, var->yres);
|
|
dprintk("%s: var->bpp = %d\n", __func__, var->bits_per_pixel);
|
|
|
|
if (type == S3C2410_LCDCON1_TFT) {
|
|
s3c2410fb_calculate_tft_lcd_regs(info, &fbi->regs);
|
|
--clkdiv;
|
|
if (clkdiv < 0)
|
|
clkdiv = 0;
|
|
} else {
|
|
s3c2410fb_calculate_stn_lcd_regs(info, &fbi->regs);
|
|
if (clkdiv < 2)
|
|
clkdiv = 2;
|
|
}
|
|
|
|
fbi->regs.lcdcon1 |= S3C2410_LCDCON1_CLKVAL(clkdiv);
|
|
|
|
/* write new registers */
|
|
|
|
dprintk("new register set:\n");
|
|
dprintk("lcdcon[1] = 0x%08lx\n", fbi->regs.lcdcon1);
|
|
dprintk("lcdcon[2] = 0x%08lx\n", fbi->regs.lcdcon2);
|
|
dprintk("lcdcon[3] = 0x%08lx\n", fbi->regs.lcdcon3);
|
|
dprintk("lcdcon[4] = 0x%08lx\n", fbi->regs.lcdcon4);
|
|
dprintk("lcdcon[5] = 0x%08lx\n", fbi->regs.lcdcon5);
|
|
|
|
writel(fbi->regs.lcdcon1 & ~S3C2410_LCDCON1_ENVID,
|
|
regs + S3C2410_LCDCON1);
|
|
writel(fbi->regs.lcdcon2, regs + S3C2410_LCDCON2);
|
|
writel(fbi->regs.lcdcon3, regs + S3C2410_LCDCON3);
|
|
writel(fbi->regs.lcdcon4, regs + S3C2410_LCDCON4);
|
|
writel(fbi->regs.lcdcon5, regs + S3C2410_LCDCON5);
|
|
|
|
/* set lcd address pointers */
|
|
s3c2410fb_set_lcdaddr(info);
|
|
|
|
fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID,
|
|
writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
|
|
}
|
|
|
|
/*
|
|
* s3c2410fb_set_par - Alters the hardware state.
|
|
* @info: frame buffer structure that represents a single frame buffer
|
|
*
|
|
*/
|
|
static int s3c2410fb_set_par(struct fb_info *info)
|
|
{
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 32:
|
|
case 16:
|
|
case 12:
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
break;
|
|
case 1:
|
|
info->fix.visual = FB_VISUAL_MONO01;
|
|
break;
|
|
default:
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
break;
|
|
}
|
|
|
|
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
|
|
|
|
/* activate this new configuration */
|
|
|
|
s3c2410fb_activate_var(info);
|
|
return 0;
|
|
}
|
|
|
|
static void schedule_palette_update(struct s3c2410fb_info *fbi,
|
|
unsigned int regno, unsigned int val)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long irqen;
|
|
void __iomem *irq_base = fbi->irq_base;
|
|
|
|
local_irq_save(flags);
|
|
|
|
fbi->palette_buffer[regno] = val;
|
|
|
|
if (!fbi->palette_ready) {
|
|
fbi->palette_ready = 1;
|
|
|
|
/* enable IRQ */
|
|
irqen = readl(irq_base + S3C24XX_LCDINTMSK);
|
|
irqen &= ~S3C2410_LCDINT_FRSYNC;
|
|
writel(irqen, irq_base + S3C24XX_LCDINTMSK);
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/* from pxafb.c */
|
|
static inline unsigned int chan_to_field(unsigned int chan,
|
|
struct fb_bitfield *bf)
|
|
{
|
|
chan &= 0xffff;
|
|
chan >>= 16 - bf->length;
|
|
return chan << bf->offset;
|
|
}
|
|
|
|
static int s3c2410fb_setcolreg(unsigned regno,
|
|
unsigned red, unsigned green, unsigned blue,
|
|
unsigned transp, struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
void __iomem *regs = fbi->io;
|
|
unsigned int val;
|
|
|
|
/* dprintk("setcol: regno=%d, rgb=%d,%d,%d\n",
|
|
regno, red, green, blue); */
|
|
|
|
switch (info->fix.visual) {
|
|
case FB_VISUAL_TRUECOLOR:
|
|
/* true-colour, use pseudo-palette */
|
|
|
|
if (regno < 16) {
|
|
u32 *pal = info->pseudo_palette;
|
|
|
|
val = chan_to_field(red, &info->var.red);
|
|
val |= chan_to_field(green, &info->var.green);
|
|
val |= chan_to_field(blue, &info->var.blue);
|
|
|
|
pal[regno] = val;
|
|
}
|
|
break;
|
|
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
if (regno < 256) {
|
|
/* currently assume RGB 5-6-5 mode */
|
|
|
|
val = (red >> 0) & 0xf800;
|
|
val |= (green >> 5) & 0x07e0;
|
|
val |= (blue >> 11) & 0x001f;
|
|
|
|
writel(val, regs + S3C2410_TFTPAL(regno));
|
|
schedule_palette_update(fbi, regno, val);
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
return 1; /* unknown type */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* s3c2410fb_lcd_enable
|
|
*
|
|
* shutdown the lcd controller
|
|
*/
|
|
static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (enable)
|
|
fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
|
|
else
|
|
fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
|
|
|
|
writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
|
|
/*
|
|
* s3c2410fb_blank
|
|
* @blank_mode: the blank mode we want.
|
|
* @info: frame buffer structure that represents a single frame buffer
|
|
*
|
|
* Blank the screen if blank_mode != 0, else unblank. Return 0 if
|
|
* blanking succeeded, != 0 if un-/blanking failed due to e.g. a
|
|
* video mode which doesn't support it. Implements VESA suspend
|
|
* and powerdown modes on hardware that supports disabling hsync/vsync:
|
|
*
|
|
* Returns negative errno on error, or zero on success.
|
|
*
|
|
*/
|
|
static int s3c2410fb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
void __iomem *tpal_reg = fbi->io;
|
|
|
|
dprintk("blank(mode=%d, info=%p)\n", blank_mode, info);
|
|
|
|
tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
|
|
|
|
if (blank_mode == FB_BLANK_POWERDOWN)
|
|
s3c2410fb_lcd_enable(fbi, 0);
|
|
else
|
|
s3c2410fb_lcd_enable(fbi, 1);
|
|
|
|
if (blank_mode == FB_BLANK_UNBLANK)
|
|
writel(0x0, tpal_reg);
|
|
else {
|
|
dprintk("setting TPAL to output 0x000000\n");
|
|
writel(S3C2410_TPAL_EN, tpal_reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c2410fb_debug_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off");
|
|
}
|
|
|
|
static int s3c2410fb_debug_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
if (len < 1)
|
|
return -EINVAL;
|
|
|
|
if (strncasecmp(buf, "on", 2) == 0 ||
|
|
strncasecmp(buf, "1", 1) == 0) {
|
|
debug = 1;
|
|
dev_dbg(dev, "s3c2410fb: Debug On");
|
|
} else if (strncasecmp(buf, "off", 3) == 0 ||
|
|
strncasecmp(buf, "0", 1) == 0) {
|
|
debug = 0;
|
|
dev_dbg(dev, "s3c2410fb: Debug Off");
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(debug, 0664, s3c2410fb_debug_show, s3c2410fb_debug_store);
|
|
|
|
static struct fb_ops s3c2410fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = s3c2410fb_check_var,
|
|
.fb_set_par = s3c2410fb_set_par,
|
|
.fb_blank = s3c2410fb_blank,
|
|
.fb_setcolreg = s3c2410fb_setcolreg,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
/*
|
|
* s3c2410fb_map_video_memory():
|
|
* Allocates the DRAM memory for the frame buffer. This buffer is
|
|
* remapped into a non-cached, non-buffered, memory region to
|
|
* allow palette and pixel writes to occur without flushing the
|
|
* cache. Once this area is remapped, all virtual memory
|
|
* access to the video memory should occur at the new region.
|
|
*/
|
|
static int s3c2410fb_map_video_memory(struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
dma_addr_t map_dma;
|
|
unsigned map_size = PAGE_ALIGN(info->fix.smem_len);
|
|
|
|
dprintk("map_video_memory(fbi=%p) map_size %u\n", fbi, map_size);
|
|
|
|
info->screen_base = dma_alloc_wc(fbi->dev, map_size, &map_dma,
|
|
GFP_KERNEL);
|
|
|
|
if (info->screen_base) {
|
|
/* prevent initial garbage on screen */
|
|
dprintk("map_video_memory: clear %p:%08x\n",
|
|
info->screen_base, map_size);
|
|
memset(info->screen_base, 0x00, map_size);
|
|
|
|
info->fix.smem_start = map_dma;
|
|
|
|
dprintk("map_video_memory: dma=%08lx cpu=%p size=%08x\n",
|
|
info->fix.smem_start, info->screen_base, map_size);
|
|
}
|
|
|
|
return info->screen_base ? 0 : -ENOMEM;
|
|
}
|
|
|
|
static inline void s3c2410fb_unmap_video_memory(struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
|
|
dma_free_wc(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
|
|
info->screen_base, info->fix.smem_start);
|
|
}
|
|
|
|
static inline void modify_gpio(void __iomem *reg,
|
|
unsigned long set, unsigned long mask)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
tmp = readl(reg) & ~mask;
|
|
writel(tmp | set, reg);
|
|
}
|
|
|
|
/*
|
|
* s3c2410fb_init_registers - Initialise all LCD-related registers
|
|
*/
|
|
static int s3c2410fb_init_registers(struct fb_info *info)
|
|
{
|
|
struct s3c2410fb_info *fbi = info->par;
|
|
struct s3c2410fb_mach_info *mach_info = dev_get_platdata(fbi->dev);
|
|
unsigned long flags;
|
|
void __iomem *regs = fbi->io;
|
|
void __iomem *tpal;
|
|
void __iomem *lpcsel;
|
|
|
|
if (is_s3c2412(fbi)) {
|
|
tpal = regs + S3C2412_TPAL;
|
|
lpcsel = regs + S3C2412_TCONSEL;
|
|
} else {
|
|
tpal = regs + S3C2410_TPAL;
|
|
lpcsel = regs + S3C2410_LPCSEL;
|
|
}
|
|
|
|
/* Initialise LCD with values from haret */
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* modify the gpio(s) with interrupts set (bjd) */
|
|
|
|
modify_gpio(S3C2410_GPCUP, mach_info->gpcup, mach_info->gpcup_mask);
|
|
modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
|
|
modify_gpio(S3C2410_GPDUP, mach_info->gpdup, mach_info->gpdup_mask);
|
|
modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
dprintk("LPCSEL = 0x%08lx\n", mach_info->lpcsel);
|
|
writel(mach_info->lpcsel, lpcsel);
|
|
|
|
dprintk("replacing TPAL %08x\n", readl(tpal));
|
|
|
|
/* ensure temporary palette disabled */
|
|
writel(0x00, tpal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void s3c2410fb_write_palette(struct s3c2410fb_info *fbi)
|
|
{
|
|
unsigned int i;
|
|
void __iomem *regs = fbi->io;
|
|
|
|
fbi->palette_ready = 0;
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
unsigned long ent = fbi->palette_buffer[i];
|
|
if (ent == PALETTE_BUFF_CLEAR)
|
|
continue;
|
|
|
|
writel(ent, regs + S3C2410_TFTPAL(i));
|
|
|
|
/* it seems the only way to know exactly
|
|
* if the palette wrote ok, is to check
|
|
* to see if the value verifies ok
|
|
*/
|
|
|
|
if (readw(regs + S3C2410_TFTPAL(i)) == ent)
|
|
fbi->palette_buffer[i] = PALETTE_BUFF_CLEAR;
|
|
else
|
|
fbi->palette_ready = 1; /* retry */
|
|
}
|
|
}
|
|
|
|
static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
|
|
{
|
|
struct s3c2410fb_info *fbi = dev_id;
|
|
void __iomem *irq_base = fbi->irq_base;
|
|
unsigned long lcdirq = readl(irq_base + S3C24XX_LCDINTPND);
|
|
|
|
if (lcdirq & S3C2410_LCDINT_FRSYNC) {
|
|
if (fbi->palette_ready)
|
|
s3c2410fb_write_palette(fbi);
|
|
|
|
writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDINTPND);
|
|
writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDSRCPND);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
|
|
|
|
static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
|
|
unsigned long val, void *data)
|
|
{
|
|
struct s3c2410fb_info *info;
|
|
struct fb_info *fbinfo;
|
|
long delta_f;
|
|
|
|
info = container_of(nb, struct s3c2410fb_info, freq_transition);
|
|
fbinfo = platform_get_drvdata(to_platform_device(info->dev));
|
|
|
|
/* work out change, <0 for speed-up */
|
|
delta_f = info->clk_rate - clk_get_rate(info->clk);
|
|
|
|
if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
|
|
(val == CPUFREQ_PRECHANGE && delta_f < 0)) {
|
|
info->clk_rate = clk_get_rate(info->clk);
|
|
s3c2410fb_activate_var(fbinfo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
|
|
{
|
|
info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;
|
|
|
|
return cpufreq_register_notifier(&info->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
|
|
{
|
|
cpufreq_unregister_notifier(&info->freq_transition,
|
|
CPUFREQ_TRANSITION_NOTIFIER);
|
|
}
|
|
|
|
#else
|
|
static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
|
|
static const char driver_name[] = "s3c2410fb";
|
|
|
|
static int s3c24xxfb_probe(struct platform_device *pdev,
|
|
enum s3c_drv_type drv_type)
|
|
{
|
|
struct s3c2410fb_info *info;
|
|
struct s3c2410fb_display *display;
|
|
struct fb_info *fbinfo;
|
|
struct s3c2410fb_mach_info *mach_info;
|
|
struct resource *res;
|
|
int ret;
|
|
int irq;
|
|
int i;
|
|
int size;
|
|
u32 lcdcon1;
|
|
|
|
mach_info = dev_get_platdata(&pdev->dev);
|
|
if (mach_info == NULL) {
|
|
dev_err(&pdev->dev,
|
|
"no platform data for lcd, cannot attach\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mach_info->default_display >= mach_info->num_displays) {
|
|
dev_err(&pdev->dev, "default is %d but only %d displays\n",
|
|
mach_info->default_display, mach_info->num_displays);
|
|
return -EINVAL;
|
|
}
|
|
|
|
display = mach_info->displays + mach_info->default_display;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "no irq for device\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
fbinfo = framebuffer_alloc(sizeof(struct s3c2410fb_info), &pdev->dev);
|
|
if (!fbinfo)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, fbinfo);
|
|
|
|
info = fbinfo->par;
|
|
info->dev = &pdev->dev;
|
|
info->drv_type = drv_type;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "failed to get memory registers\n");
|
|
ret = -ENXIO;
|
|
goto dealloc_fb;
|
|
}
|
|
|
|
size = resource_size(res);
|
|
info->mem = request_mem_region(res->start, size, pdev->name);
|
|
if (info->mem == NULL) {
|
|
dev_err(&pdev->dev, "failed to get memory region\n");
|
|
ret = -ENOENT;
|
|
goto dealloc_fb;
|
|
}
|
|
|
|
info->io = ioremap(res->start, size);
|
|
if (info->io == NULL) {
|
|
dev_err(&pdev->dev, "ioremap() of registers failed\n");
|
|
ret = -ENXIO;
|
|
goto release_mem;
|
|
}
|
|
|
|
if (drv_type == DRV_S3C2412)
|
|
info->irq_base = info->io + S3C2412_LCDINTBASE;
|
|
else
|
|
info->irq_base = info->io + S3C2410_LCDINTBASE;
|
|
|
|
dprintk("devinit\n");
|
|
|
|
strcpy(fbinfo->fix.id, driver_name);
|
|
|
|
/* Stop the video */
|
|
lcdcon1 = readl(info->io + S3C2410_LCDCON1);
|
|
writel(lcdcon1 & ~S3C2410_LCDCON1_ENVID, info->io + S3C2410_LCDCON1);
|
|
|
|
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
fbinfo->fix.type_aux = 0;
|
|
fbinfo->fix.xpanstep = 0;
|
|
fbinfo->fix.ypanstep = 0;
|
|
fbinfo->fix.ywrapstep = 0;
|
|
fbinfo->fix.accel = FB_ACCEL_NONE;
|
|
|
|
fbinfo->var.nonstd = 0;
|
|
fbinfo->var.activate = FB_ACTIVATE_NOW;
|
|
fbinfo->var.accel_flags = 0;
|
|
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
fbinfo->fbops = &s3c2410fb_ops;
|
|
fbinfo->flags = FBINFO_FLAG_DEFAULT;
|
|
fbinfo->pseudo_palette = &info->pseudo_pal;
|
|
|
|
for (i = 0; i < 256; i++)
|
|
info->palette_buffer[i] = PALETTE_BUFF_CLEAR;
|
|
|
|
ret = request_irq(irq, s3c2410fb_irq, 0, pdev->name, info);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot get irq %d - err %d\n", irq, ret);
|
|
ret = -EBUSY;
|
|
goto release_regs;
|
|
}
|
|
|
|
info->clk = clk_get(NULL, "lcd");
|
|
if (IS_ERR(info->clk)) {
|
|
dev_err(&pdev->dev, "failed to get lcd clock source\n");
|
|
ret = PTR_ERR(info->clk);
|
|
goto release_irq;
|
|
}
|
|
|
|
clk_prepare_enable(info->clk);
|
|
dprintk("got and enabled clock\n");
|
|
|
|
usleep_range(1000, 1100);
|
|
|
|
info->clk_rate = clk_get_rate(info->clk);
|
|
|
|
/* find maximum required memory size for display */
|
|
for (i = 0; i < mach_info->num_displays; i++) {
|
|
unsigned long smem_len = mach_info->displays[i].xres;
|
|
|
|
smem_len *= mach_info->displays[i].yres;
|
|
smem_len *= mach_info->displays[i].bpp;
|
|
smem_len >>= 3;
|
|
if (fbinfo->fix.smem_len < smem_len)
|
|
fbinfo->fix.smem_len = smem_len;
|
|
}
|
|
|
|
/* Initialize video memory */
|
|
ret = s3c2410fb_map_video_memory(fbinfo);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret);
|
|
ret = -ENOMEM;
|
|
goto release_clock;
|
|
}
|
|
|
|
dprintk("got video memory\n");
|
|
|
|
fbinfo->var.xres = display->xres;
|
|
fbinfo->var.yres = display->yres;
|
|
fbinfo->var.bits_per_pixel = display->bpp;
|
|
|
|
s3c2410fb_init_registers(fbinfo);
|
|
|
|
s3c2410fb_check_var(&fbinfo->var, fbinfo);
|
|
|
|
ret = s3c2410fb_cpufreq_register(info);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register cpufreq\n");
|
|
goto free_video_memory;
|
|
}
|
|
|
|
ret = register_framebuffer(fbinfo);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register framebuffer device: %d\n",
|
|
ret);
|
|
goto free_cpufreq;
|
|
}
|
|
|
|
/* create device files */
|
|
ret = device_create_file(&pdev->dev, &dev_attr_debug);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "failed to add debug attribute\n");
|
|
|
|
dev_info(&pdev->dev, "fb%d: %s frame buffer device\n",
|
|
fbinfo->node, fbinfo->fix.id);
|
|
|
|
return 0;
|
|
|
|
free_cpufreq:
|
|
s3c2410fb_cpufreq_deregister(info);
|
|
free_video_memory:
|
|
s3c2410fb_unmap_video_memory(fbinfo);
|
|
release_clock:
|
|
clk_disable_unprepare(info->clk);
|
|
clk_put(info->clk);
|
|
release_irq:
|
|
free_irq(irq, info);
|
|
release_regs:
|
|
iounmap(info->io);
|
|
release_mem:
|
|
release_mem_region(res->start, size);
|
|
dealloc_fb:
|
|
framebuffer_release(fbinfo);
|
|
return ret;
|
|
}
|
|
|
|
static int s3c2410fb_probe(struct platform_device *pdev)
|
|
{
|
|
return s3c24xxfb_probe(pdev, DRV_S3C2410);
|
|
}
|
|
|
|
static int s3c2412fb_probe(struct platform_device *pdev)
|
|
{
|
|
return s3c24xxfb_probe(pdev, DRV_S3C2412);
|
|
}
|
|
|
|
|
|
/*
|
|
* Cleanup
|
|
*/
|
|
static int s3c2410fb_remove(struct platform_device *pdev)
|
|
{
|
|
struct fb_info *fbinfo = platform_get_drvdata(pdev);
|
|
struct s3c2410fb_info *info = fbinfo->par;
|
|
int irq;
|
|
|
|
unregister_framebuffer(fbinfo);
|
|
s3c2410fb_cpufreq_deregister(info);
|
|
|
|
s3c2410fb_lcd_enable(info, 0);
|
|
usleep_range(1000, 1100);
|
|
|
|
s3c2410fb_unmap_video_memory(fbinfo);
|
|
|
|
if (info->clk) {
|
|
clk_disable_unprepare(info->clk);
|
|
clk_put(info->clk);
|
|
info->clk = NULL;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
free_irq(irq, info);
|
|
|
|
iounmap(info->io);
|
|
|
|
release_mem_region(info->mem->start, resource_size(info->mem));
|
|
|
|
framebuffer_release(fbinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* suspend and resume support for the lcd controller */
|
|
static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct fb_info *fbinfo = platform_get_drvdata(dev);
|
|
struct s3c2410fb_info *info = fbinfo->par;
|
|
|
|
s3c2410fb_lcd_enable(info, 0);
|
|
|
|
/* sleep before disabling the clock, we need to ensure
|
|
* the LCD DMA engine is not going to get back on the bus
|
|
* before the clock goes off again (bjd) */
|
|
|
|
usleep_range(1000, 1100);
|
|
clk_disable_unprepare(info->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c2410fb_resume(struct platform_device *dev)
|
|
{
|
|
struct fb_info *fbinfo = platform_get_drvdata(dev);
|
|
struct s3c2410fb_info *info = fbinfo->par;
|
|
|
|
clk_prepare_enable(info->clk);
|
|
usleep_range(1000, 1100);
|
|
|
|
s3c2410fb_init_registers(fbinfo);
|
|
|
|
/* re-activate our display after resume */
|
|
s3c2410fb_activate_var(fbinfo);
|
|
s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define s3c2410fb_suspend NULL
|
|
#define s3c2410fb_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver s3c2410fb_driver = {
|
|
.probe = s3c2410fb_probe,
|
|
.remove = s3c2410fb_remove,
|
|
.suspend = s3c2410fb_suspend,
|
|
.resume = s3c2410fb_resume,
|
|
.driver = {
|
|
.name = "s3c2410-lcd",
|
|
},
|
|
};
|
|
|
|
static struct platform_driver s3c2412fb_driver = {
|
|
.probe = s3c2412fb_probe,
|
|
.remove = s3c2410fb_remove,
|
|
.suspend = s3c2410fb_suspend,
|
|
.resume = s3c2410fb_resume,
|
|
.driver = {
|
|
.name = "s3c2412-lcd",
|
|
},
|
|
};
|
|
|
|
int __init s3c2410fb_init(void)
|
|
{
|
|
int ret = platform_driver_register(&s3c2410fb_driver);
|
|
|
|
if (ret == 0)
|
|
ret = platform_driver_register(&s3c2412fb_driver);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit s3c2410fb_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&s3c2410fb_driver);
|
|
platform_driver_unregister(&s3c2412fb_driver);
|
|
}
|
|
|
|
module_init(s3c2410fb_init);
|
|
module_exit(s3c2410fb_cleanup);
|
|
|
|
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
|
|
MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:s3c2410-lcd");
|
|
MODULE_ALIAS("platform:s3c2412-lcd");
|