alistair23-linux/arch/mips/lasat/sysctl.c
Paul Gortmaker 26dd3e4ff9 MIPS: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14 09:00:25 +00:00

273 lines
5.7 KiB
C

/*
* Thomas Horsten <thh@lasat.com>
* Copyright (C) 2000 LASAT Networks A/S.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Routines specific to the LASAT boards
*/
#include <linux/types.h>
#include <asm/lasat/lasat.h>
#include <linux/sysctl.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/net.h>
#include <linux/inet.h>
#include <linux/uaccess.h>
#include <asm/time.h>
#ifdef CONFIG_DS1603
#include "ds1603.h"
#endif
/* And the same for proc */
int proc_dolasatstring(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
r = proc_dostring(table, write, buffer, lenp, ppos);
if ((!write) || r)
return r;
lasat_write_eeprom_info();
return 0;
}
#ifdef CONFIG_DS1603
static int rtctmp;
/* proc function to read/write RealTime Clock */
int proc_dolasatrtc(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct timespec64 ts;
int r;
if (!write) {
read_persistent_clock64(&ts);
rtctmp = ts.tv_sec;
/* check for time < 0 and set to 0 */
if (rtctmp < 0)
rtctmp = 0;
}
r = proc_dointvec(table, write, buffer, lenp, ppos);
if (r)
return r;
if (write)
rtc_mips_set_mmss(rtctmp);
return 0;
}
#endif
#ifdef CONFIG_INET
int proc_lasat_ip(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int ip;
char *p, c;
int len;
char ipbuf[32];
if (!table->data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
*lenp = 0;
return 0;
}
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
if (get_user(c, p++))
return -EFAULT;
if (c == 0 || c == '\n')
break;
len++;
}
if (len >= sizeof(ipbuf)-1)
len = sizeof(ipbuf) - 1;
if (copy_from_user(ipbuf, buffer, len))
return -EFAULT;
ipbuf[len] = 0;
*ppos += *lenp;
/* Now see if we can convert it to a valid IP */
ip = in_aton(ipbuf);
*(unsigned int *)(table->data) = ip;
lasat_write_eeprom_info();
} else {
ip = *(unsigned int *)(table->data);
sprintf(ipbuf, "%d.%d.%d.%d",
(ip) & 0xff,
(ip >> 8) & 0xff,
(ip >> 16) & 0xff,
(ip >> 24) & 0xff);
len = strlen(ipbuf);
if (len > *lenp)
len = *lenp;
if (len)
if (copy_to_user(buffer, ipbuf, len))
return -EFAULT;
if (len < *lenp) {
if (put_user('\n', ((char *) buffer) + len))
return -EFAULT;
len++;
}
*lenp = len;
*ppos += len;
}
return 0;
}
#endif
int proc_lasat_prid(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
r = proc_dointvec(table, write, buffer, lenp, ppos);
if (r < 0)
return r;
if (write) {
lasat_board_info.li_eeprom_info.prid =
lasat_board_info.li_prid;
lasat_write_eeprom_info();
lasat_init_board_info();
}
return 0;
}
extern int lasat_boot_to_service;
static struct ctl_table lasat_table[] = {
{
.procname = "cpu-hz",
.data = &lasat_board_info.li_cpu_hz,
.maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "bus-hz",
.data = &lasat_board_info.li_bus_hz,
.maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "bmid",
.data = &lasat_board_info.li_bmid,
.maxlen = sizeof(int),
.mode = 0444,
.proc_handler = proc_dointvec,
},
{
.procname = "prid",
.data = &lasat_board_info.li_prid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_lasat_prid,
},
#ifdef CONFIG_INET
{
.procname = "ipaddr",
.data = &lasat_board_info.li_eeprom_info.ipaddr,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_lasat_ip,
},
{
.procname = "netmask",
.data = &lasat_board_info.li_eeprom_info.netmask,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_lasat_ip,
},
#endif
{
.procname = "passwd_hash",
.data = &lasat_board_info.li_eeprom_info.passwd_hash,
.maxlen =
sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
.mode = 0600,
.proc_handler = proc_dolasatstring,
},
{
.procname = "boot-service",
.data = &lasat_boot_to_service,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec,
},
#ifdef CONFIG_DS1603
{
.procname = "rtc",
.data = &rtctmp,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dolasatrtc,
},
#endif
{
.procname = "namestr",
.data = &lasat_board_info.li_namestr,
.maxlen = sizeof(lasat_board_info.li_namestr),
.mode = 0444,
.proc_handler = proc_dostring,
},
{
.procname = "typestr",
.data = &lasat_board_info.li_typestr,
.maxlen = sizeof(lasat_board_info.li_typestr),
.mode = 0444,
.proc_handler = proc_dostring,
},
{}
};
static struct ctl_table lasat_root_table[] = {
{
.procname = "lasat",
.mode = 0555,
.child = lasat_table
},
{}
};
static int __init lasat_register_sysctl(void)
{
struct ctl_table_header *lasat_table_header;
lasat_table_header =
register_sysctl_table(lasat_root_table);
if (!lasat_table_header) {
printk(KERN_ERR "Unable to register LASAT sysctl\n");
return -ENOMEM;
}
return 0;
}
arch_initcall(lasat_register_sysctl);