redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/net/mac80211
History
Helmut Schaa 35afa58862 mac80211: Copy tx'ed beacons to monitor mode 
When debugging wireless powersave issues on the AP side it's quite helpful
to see our own beacons that are transmitted by the hardware/driver. However,
this is not that easy since beacons don't pass through the regular TX queues.

Preferably drivers would call ieee80211_tx_status also for tx'ed beacons
but that's not always possible. Hence, just send a copy of each beacon
generated by ieee80211_beacon_get_tim to monitor devices when they are
getting fetched by the driver.

Also add a HW flag IEEE80211_HW_BEACON_TX_STATUS that can be used by
drivers to indicate that they report TX status for beacons.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
(with a fix from Christian Lamparted rolled in)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-29 15:56:33 +02:00
..
aes_ccm.c mac80211: Switch to new AEAD interface 2015-05-28 11:23:20 +08:00
aes_ccm.h
aes_cmac.c mac80211: remove ieee80211_aes_cmac_calculate_k1_k2() 2015-08-13 11:31:45 +02:00
aes_cmac.h
aes_gcm.c mac80211: Switch to new AEAD interface 2015-05-28 11:23:20 +08:00
aes_gcm.h
aes_gmac.c mac80211: Switch to new AEAD interface 2015-05-28 11:23:20 +08:00
aes_gmac.h
agg-rx.c mac80211: allow the driver to advertise A-MSDU within A-MPDU Rx support 2015-09-22 15:21:24 +02:00
agg-tx.c mac80211: allow to transmit A-MSDU within A-MPDU 2015-09-22 15:21:23 +02:00
cfg.c mac80211: introduce per vif frame registration API 2015-09-22 15:21:22 +02:00
cfg.h
chan.c mac80211: upgrade BW of TDLS peers when possible 2015-07-17 15:38:12 +02:00
debug.h
debugfs.c mac80211: Copy tx'ed beacons to monitor mode 2015-09-29 15:56:33 +02:00
debugfs.h
debugfs_key.c mac80211: remove key TX/RX counter 2015-07-17 15:38:01 +02:00
debugfs_key.h
debugfs_netdev.c mac80211: remove last_beacon/ave_beacon debugfs files 2015-09-22 15:21:25 +02:00
debugfs_netdev.h
debugfs_sta.c mac80211: clean up station debugfs 2015-05-05 14:21:55 +02:00
debugfs_sta.h
driver-ops.c mac80211: deinline drv_sta_state 2015-07-17 15:48:50 +02:00
driver-ops.h mac80211: allow to transmit A-MSDU within A-MPDU 2015-09-22 15:21:23 +02:00
ethtool.c mac80211: remove sta->tx_fragments counter 2015-05-05 14:21:55 +02:00
event.c
ht.c mac80211: add VHT support for IBSS 2015-03-30 10:48:26 +02:00
ibss.c mac80211: fix the beacon csa counter for mesh and ibss 2015-06-09 22:04:25 +02:00
ieee80211_i.h mac80211: Split sending tx'ed frames to monitor interfaces into its own function 2015-09-22 15:21:28 +02:00
iface.c mac80211: process skb_queue while scanning in HW 2015-09-22 15:21:20 +02:00
Kconfig mac80211: use DECLARE_EWMA 2015-08-14 17:49:53 +02:00
key.c mac80211: remove sta_info.gtk_idx 2015-07-17 15:37:54 +02:00
key.h mac80211: remove key TX/RX counter 2015-07-17 15:38:01 +02:00
led.c mac80211: fix throughput LED trigger 2015-05-11 19:16:04 +02:00
led.h mac80211: make LED triggering depend on activation 2015-05-05 14:21:56 +02:00
main.c mac80211: TDLS: handle chan-switch in RTNL locked work 2015-07-17 15:40:15 +02:00
Makefile mac80211: deinline drv_sta_state 2015-07-17 15:48:50 +02:00
mesh.c mac80211: implement VHT support for mesh 2015-09-22 15:21:25 +02:00
mesh.h mac80211: implement VHT support for mesh 2015-09-22 15:21:25 +02:00
mesh_hwmp.c mac80211: mesh: move fail_avg into mesh struct 2015-07-17 15:38:24 +02:00
mesh_pathtbl.c
mesh_plink.c mac80211: implement VHT support for mesh 2015-09-22 15:21:25 +02:00
mesh_ps.c mac80211: mesh: separate plid and aid concepts 2015-07-17 15:47:11 +02:00
mesh_sync.c mac80211: move mesh related station fields to own struct 2015-07-17 15:38:06 +02:00
michael.c
michael.h
mlme.c mac80211: use DECLARE_EWMA for ave_beacon_signal 2015-09-22 15:21:26 +02:00
ocb.c mac80211: Make OCB mode set BSSID 2015-08-14 17:49:49 +02:00
offchannel.c mac80211: convert HW flags to unsigned long bitmap 2015-06-10 16:05:36 +02:00
pm.c mac80211: wowlan: enable powersave if suspend while ps-polling 2015-07-17 11:13:21 +02:00
rate.c mac80211: add rate mask logic for vht rates 2015-08-14 17:49:51 +02:00
rate.h mac80211: deinline rate_control_rate_init, rate_control_rate_update 2015-07-17 15:50:02 +02:00
rc80211_minstrel.c mac80211: fix invalid read in minstrel_sort_best_tp_rates() 2015-08-13 13:52:34 +02:00
rc80211_minstrel.h mac80211: add standard deviation to Minstrel stats 2015-04-01 20:44:33 +02:00
rc80211_minstrel_debugfs.c mac80211: add standard deviation to Minstrel stats 2015-04-01 20:44:33 +02:00
rc80211_minstrel_ht.c mac80211: minstrel_ht: handle peers in dynamic SMPS 2015-07-17 15:38:20 +02:00
rc80211_minstrel_ht.h mac80211: add max lossless throughput per rate 2015-04-01 20:44:32 +02:00
rc80211_minstrel_ht_debugfs.c mac80211: add standard deviation to Minstrel stats 2015-04-01 20:44:33 +02:00
rx.c mac80211: use DECLARE_EWMA 2015-08-14 17:49:53 +02:00
scan.c mac80211: convert HW flags to unsigned long bitmap 2015-06-10 16:05:36 +02:00
spectmgmt.c
sta_info.c mac80211: use DECLARE_EWMA 2015-08-14 17:49:53 +02:00
sta_info.h mac80211: allow to transmit A-MSDU within A-MPDU 2015-09-22 15:21:23 +02:00
status.c mac80211: Split sending tx'ed frames to monitor interfaces into its own function 2015-09-22 15:21:28 +02:00
tdls.c mac80211: TDLS: check reg with IR-relax on chandef upgrade 2015-09-22 15:21:21 +02:00
tkip.c
tkip.h
trace.c mac80211: Move message tracepoints to their own header 2015-04-07 12:32:09 -04:00
trace.h mac80211: allow to transmit A-MSDU within A-MPDU 2015-09-22 15:21:23 +02:00
trace_msg.h mac80211: Move message tracepoints to their own header 2015-04-07 12:32:09 -04:00
tx.c mac80211: Copy tx'ed beacons to monitor mode 2015-09-29 15:56:33 +02:00
util.c mac80211: use DECLARE_EWMA for ave_beacon_signal 2015-09-22 15:21:26 +02:00
vht.c mac80211: add rate mask logic for vht rates 2015-08-14 17:49:51 +02:00
wep.c mac80211: move WEP tailroom size check 2015-05-11 14:51:29 +02:00
wep.h
wme.c
wme.h
wpa.c mac80211: support device/driver PN check for CCMP/GCMP 2015-07-17 15:38:02 +02:00
wpa.h