![Stephen Boyd](/assets/img/avatar_default.png)
The #size-cells for the pmics are 0, but we specify a size in the reg property so that MPP and GPIO modules can figure out how many pins there are. Now that we've done that by counting irqs, we can remove the size elements in the reg properties and be DT compliant. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
171 lines
4.3 KiB
Plaintext
171 lines
4.3 KiB
Plaintext
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
|
|
&spmi_bus {
|
|
|
|
pm8941_0: pm8941@0 {
|
|
compatible = "qcom,pm8941", "qcom,spmi-pmic";
|
|
reg = <0x0 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rtc@6000 {
|
|
compatible = "qcom,pm8941-rtc";
|
|
reg = <0x6000>,
|
|
<0x6100>;
|
|
reg-names = "rtc", "alarm";
|
|
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
pwrkey@800 {
|
|
compatible = "qcom,pm8941-pwrkey";
|
|
reg = <0x800>;
|
|
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
|
|
debounce = <15625>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
charger@1000 {
|
|
compatible = "qcom,pm8941-charger";
|
|
reg = <0x1000>;
|
|
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
|
|
interrupt-names = "chg-done",
|
|
"chg-fast",
|
|
"chg-trkl",
|
|
"bat-temp-ok",
|
|
"bat-present",
|
|
"chg-gone",
|
|
"usb-valid",
|
|
"dc-valid";
|
|
};
|
|
|
|
pm8941_gpios: gpios@c000 {
|
|
compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
|
|
reg = <0xc000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
|
|
<0 0xc1 0 IRQ_TYPE_NONE>,
|
|
<0 0xc2 0 IRQ_TYPE_NONE>,
|
|
<0 0xc3 0 IRQ_TYPE_NONE>,
|
|
<0 0xc4 0 IRQ_TYPE_NONE>,
|
|
<0 0xc5 0 IRQ_TYPE_NONE>,
|
|
<0 0xc6 0 IRQ_TYPE_NONE>,
|
|
<0 0xc7 0 IRQ_TYPE_NONE>,
|
|
<0 0xc8 0 IRQ_TYPE_NONE>,
|
|
<0 0xc9 0 IRQ_TYPE_NONE>,
|
|
<0 0xca 0 IRQ_TYPE_NONE>,
|
|
<0 0xcb 0 IRQ_TYPE_NONE>,
|
|
<0 0xcc 0 IRQ_TYPE_NONE>,
|
|
<0 0xcd 0 IRQ_TYPE_NONE>,
|
|
<0 0xce 0 IRQ_TYPE_NONE>,
|
|
<0 0xcf 0 IRQ_TYPE_NONE>,
|
|
<0 0xd0 0 IRQ_TYPE_NONE>,
|
|
<0 0xd1 0 IRQ_TYPE_NONE>,
|
|
<0 0xd2 0 IRQ_TYPE_NONE>,
|
|
<0 0xd3 0 IRQ_TYPE_NONE>,
|
|
<0 0xd4 0 IRQ_TYPE_NONE>,
|
|
<0 0xd5 0 IRQ_TYPE_NONE>,
|
|
<0 0xd6 0 IRQ_TYPE_NONE>,
|
|
<0 0xd7 0 IRQ_TYPE_NONE>,
|
|
<0 0xd8 0 IRQ_TYPE_NONE>,
|
|
<0 0xd9 0 IRQ_TYPE_NONE>,
|
|
<0 0xda 0 IRQ_TYPE_NONE>,
|
|
<0 0xdb 0 IRQ_TYPE_NONE>,
|
|
<0 0xdc 0 IRQ_TYPE_NONE>,
|
|
<0 0xdd 0 IRQ_TYPE_NONE>,
|
|
<0 0xde 0 IRQ_TYPE_NONE>,
|
|
<0 0xdf 0 IRQ_TYPE_NONE>,
|
|
<0 0xe0 0 IRQ_TYPE_NONE>,
|
|
<0 0xe1 0 IRQ_TYPE_NONE>,
|
|
<0 0xe2 0 IRQ_TYPE_NONE>,
|
|
<0 0xe3 0 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
pm8941_mpps: mpps@a000 {
|
|
compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
|
|
reg = <0xa000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
|
|
<0 0xa1 0 IRQ_TYPE_NONE>,
|
|
<0 0xa2 0 IRQ_TYPE_NONE>,
|
|
<0 0xa3 0 IRQ_TYPE_NONE>,
|
|
<0 0xa4 0 IRQ_TYPE_NONE>,
|
|
<0 0xa5 0 IRQ_TYPE_NONE>,
|
|
<0 0xa6 0 IRQ_TYPE_NONE>,
|
|
<0 0xa7 0 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
pm8941_temp: temp-alarm@2400 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0x2400>;
|
|
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
|
|
io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
|
|
io-channel-names = "thermal";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pm8941_vadc: vadc@3100 {
|
|
compatible = "qcom,spmi-vadc";
|
|
reg = <0x3100>;
|
|
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <1>;
|
|
|
|
die_temp {
|
|
reg = <VADC_DIE_TEMP>;
|
|
};
|
|
ref_625mv {
|
|
reg = <VADC_REF_625MV>;
|
|
};
|
|
ref_1250v {
|
|
reg = <VADC_REF_1250MV>;
|
|
};
|
|
ref_gnd {
|
|
reg = <VADC_GND_REF>;
|
|
};
|
|
ref_vdd {
|
|
reg = <VADC_VDD_VADC>;
|
|
};
|
|
};
|
|
|
|
pm8941_iadc: iadc@3600 {
|
|
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
|
|
reg = <0x3600>;
|
|
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
|
|
qcom,external-resistor-micro-ohms = <10000>;
|
|
};
|
|
|
|
coincell@2800 {
|
|
compatible = "qcom,pm8941-coincell";
|
|
reg = <0x2800>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pm8941_1: pm8941@1 {
|
|
compatible = "qcom,pm8941", "qcom,spmi-pmic";
|
|
reg = <0x1 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8941_wled: wled@d800 {
|
|
compatible = "qcom,pm8941-wled";
|
|
reg = <0xd800>;
|
|
label = "backlight";
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|