![Andrew Lunn](/assets/img/avatar_default.png)
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
240 lines
5.8 KiB
C
240 lines
5.8 KiB
C
/*
|
|
* Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
|
|
* Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/orion5x.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
#define MV2120_NOR_BOOT_BASE 0xf4000000
|
|
#define MV2120_NOR_BOOT_SIZE SZ_512K
|
|
|
|
#define MV2120_GPIO_RTC_IRQ 3
|
|
#define MV2120_GPIO_KEY_RESET 17
|
|
#define MV2120_GPIO_KEY_POWER 18
|
|
#define MV2120_GPIO_POWER_OFF 19
|
|
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
static struct mv643xx_eth_platform_data mv2120_eth_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
static struct mv_sata_platform_data mv2120_sata_data = {
|
|
.n_ports = 2,
|
|
};
|
|
|
|
static struct mtd_partition mv2120_partitions[] = {
|
|
{
|
|
.name = "firmware",
|
|
.size = 0x00080000,
|
|
.offset = 0,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data mv2120_nor_flash_data = {
|
|
.width = 1,
|
|
.parts = mv2120_partitions,
|
|
.nr_parts = ARRAY_SIZE(mv2120_partitions)
|
|
};
|
|
|
|
static struct resource mv2120_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = MV2120_NOR_BOOT_BASE,
|
|
.end = MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device mv2120_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &mv2120_nor_flash_data,
|
|
},
|
|
.resource = &mv2120_nor_flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
static struct gpio_keys_button mv2120_buttons[] = {
|
|
{
|
|
.code = KEY_RESTART,
|
|
.gpio = MV2120_GPIO_KEY_RESET,
|
|
.desc = "reset",
|
|
.active_low = 1,
|
|
}, {
|
|
.code = KEY_POWER,
|
|
.gpio = MV2120_GPIO_KEY_POWER,
|
|
.desc = "power",
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data mv2120_button_data = {
|
|
.buttons = mv2120_buttons,
|
|
.nbuttons = ARRAY_SIZE(mv2120_buttons),
|
|
};
|
|
|
|
static struct platform_device mv2120_button_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
.dev = {
|
|
.platform_data = &mv2120_button_data,
|
|
},
|
|
};
|
|
|
|
|
|
/****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
static unsigned int mv2120_mpp_modes[] __initdata = {
|
|
MPP0_GPIO, /* Sys status LED */
|
|
MPP1_GPIO, /* Sys error LED */
|
|
MPP2_GPIO, /* OverTemp interrupt */
|
|
MPP3_GPIO, /* RTC interrupt */
|
|
MPP4_GPIO, /* V_LED 5V */
|
|
MPP5_GPIO, /* V_LED 3.3V */
|
|
MPP6_UNUSED,
|
|
MPP7_UNUSED,
|
|
MPP8_GPIO, /* SATA 0 fail LED */
|
|
MPP9_GPIO, /* SATA 1 fail LED */
|
|
MPP10_UNUSED,
|
|
MPP11_UNUSED,
|
|
MPP12_SATA_LED, /* SATA 0 presence */
|
|
MPP13_SATA_LED, /* SATA 1 presence */
|
|
MPP14_SATA_LED, /* SATA 0 active */
|
|
MPP15_SATA_LED, /* SATA 1 active */
|
|
MPP16_UNUSED,
|
|
MPP17_GPIO, /* Reset button */
|
|
MPP18_GPIO, /* Power button */
|
|
MPP19_GPIO, /* Power off */
|
|
0,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata mv2120_i2c_rtc = {
|
|
I2C_BOARD_INFO("pcf8563", 0x51),
|
|
.irq = 0,
|
|
};
|
|
|
|
static struct gpio_led mv2120_led_pins[] = {
|
|
{
|
|
.name = "mv2120:blue:health",
|
|
.gpio = 0,
|
|
},
|
|
{
|
|
.name = "mv2120:red:health",
|
|
.gpio = 1,
|
|
},
|
|
{
|
|
.name = "mv2120:led:bright",
|
|
.gpio = 4,
|
|
.default_trigger = "default-on",
|
|
},
|
|
{
|
|
.name = "mv2120:led:dimmed",
|
|
.gpio = 5,
|
|
},
|
|
{
|
|
.name = "mv2120:red:sata0",
|
|
.gpio = 8,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "mv2120:red:sata1",
|
|
.gpio = 9,
|
|
.active_low = 1,
|
|
},
|
|
|
|
};
|
|
|
|
static struct gpio_led_platform_data mv2120_led_data = {
|
|
.leds = mv2120_led_pins,
|
|
.num_leds = ARRAY_SIZE(mv2120_led_pins),
|
|
};
|
|
|
|
static struct platform_device mv2120_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &mv2120_led_data,
|
|
}
|
|
};
|
|
|
|
static void mv2120_power_off(void)
|
|
{
|
|
pr_info("%s: triggering power-off...\n", __func__);
|
|
gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
|
|
}
|
|
|
|
static void __init mv2120_init(void)
|
|
{
|
|
/* Setup basic Orion functions. Need to be called early. */
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(mv2120_mpp_modes);
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_ehci1_init();
|
|
orion5x_eth_init(&mv2120_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_sata_init(&mv2120_sata_data);
|
|
orion5x_uart0_init();
|
|
orion5x_xor_init();
|
|
|
|
orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
|
|
platform_device_register(&mv2120_nor_flash);
|
|
|
|
platform_device_register(&mv2120_button_device);
|
|
|
|
if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
|
|
if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
|
|
mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
|
|
else
|
|
gpio_free(MV2120_GPIO_RTC_IRQ);
|
|
}
|
|
i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
|
|
platform_device_register(&mv2120_leds);
|
|
|
|
/* register mv2120 specific power-off method */
|
|
if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
|
|
gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
|
|
pr_err("mv2120: failed to setup power-off GPIO\n");
|
|
pm_power_off = mv2120_power_off;
|
|
}
|
|
|
|
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
|
|
MACHINE_START(MV2120, "HP Media Vault mv2120")
|
|
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
|
|
.boot_params = 0x00000100,
|
|
.init_machine = mv2120_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_early = orion5x_init_early,
|
|
.init_irq = orion5x_init_irq,
|
|
.timer = &orion5x_timer,
|
|
.fixup = tag_fixup_mem32
|
|
MACHINE_END
|