![Denis V. Lunev](/assets/img/avatar_default.png)
This patch makes shrink_dcache_sb consistent with dentry pruning policy. On the first pass we iterate over dentry unused list and prepare some dentries for removal. However, since the existing code moves evicted dentries to the beginning of the LRU it can happen that fresh dentries from other superblocks will be inserted *before* our dentries. This can result in significant slowdown of shrink_dcache_sb(). Moreover, for virtual filesystems like unionfs which can call dput() during dentries kill existing code results in O(n^2) complexity. We observed 2 minutes shrink_dcache_sb() with only 35000 dentries. To avoid this effects we propose to isolate sb dentries at the end of LRU list. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: Andrey Mirkin <amirkin@openvz.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
999 lines
30 KiB
C
999 lines
30 KiB
C
#ifndef _LINUX_LIST_H
|
|
#define _LINUX_LIST_H
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/poison.h>
|
|
#include <linux/prefetch.h>
|
|
#include <asm/system.h>
|
|
|
|
/*
|
|
* Simple doubly linked list implementation.
|
|
*
|
|
* Some of the internal functions ("__xxx") are useful when
|
|
* manipulating whole lists rather than single entries, as
|
|
* sometimes we already know the next/prev entries and we can
|
|
* generate better code by using them directly rather than
|
|
* using the generic single-entry routines.
|
|
*/
|
|
|
|
struct list_head {
|
|
struct list_head *next, *prev;
|
|
};
|
|
|
|
#define LIST_HEAD_INIT(name) { &(name), &(name) }
|
|
|
|
#define LIST_HEAD(name) \
|
|
struct list_head name = LIST_HEAD_INIT(name)
|
|
|
|
static inline void INIT_LIST_HEAD(struct list_head *list)
|
|
{
|
|
list->next = list;
|
|
list->prev = list;
|
|
}
|
|
|
|
/*
|
|
* Insert a new entry between two known consecutive entries.
|
|
*
|
|
* This is only for internal list manipulation where we know
|
|
* the prev/next entries already!
|
|
*/
|
|
#ifndef CONFIG_DEBUG_LIST
|
|
static inline void __list_add(struct list_head *new,
|
|
struct list_head *prev,
|
|
struct list_head *next)
|
|
{
|
|
next->prev = new;
|
|
new->next = next;
|
|
new->prev = prev;
|
|
prev->next = new;
|
|
}
|
|
#else
|
|
extern void __list_add(struct list_head *new,
|
|
struct list_head *prev,
|
|
struct list_head *next);
|
|
#endif
|
|
|
|
/**
|
|
* list_add - add a new entry
|
|
* @new: new entry to be added
|
|
* @head: list head to add it after
|
|
*
|
|
* Insert a new entry after the specified head.
|
|
* This is good for implementing stacks.
|
|
*/
|
|
#ifndef CONFIG_DEBUG_LIST
|
|
static inline void list_add(struct list_head *new, struct list_head *head)
|
|
{
|
|
__list_add(new, head, head->next);
|
|
}
|
|
#else
|
|
extern void list_add(struct list_head *new, struct list_head *head);
|
|
#endif
|
|
|
|
|
|
/**
|
|
* list_add_tail - add a new entry
|
|
* @new: new entry to be added
|
|
* @head: list head to add it before
|
|
*
|
|
* Insert a new entry before the specified head.
|
|
* This is useful for implementing queues.
|
|
*/
|
|
static inline void list_add_tail(struct list_head *new, struct list_head *head)
|
|
{
|
|
__list_add(new, head->prev, head);
|
|
}
|
|
|
|
/*
|
|
* Insert a new entry between two known consecutive entries.
|
|
*
|
|
* This is only for internal list manipulation where we know
|
|
* the prev/next entries already!
|
|
*/
|
|
static inline void __list_add_rcu(struct list_head * new,
|
|
struct list_head * prev, struct list_head * next)
|
|
{
|
|
new->next = next;
|
|
new->prev = prev;
|
|
smp_wmb();
|
|
next->prev = new;
|
|
prev->next = new;
|
|
}
|
|
|
|
/**
|
|
* list_add_rcu - add a new entry to rcu-protected list
|
|
* @new: new entry to be added
|
|
* @head: list head to add it after
|
|
*
|
|
* Insert a new entry after the specified head.
|
|
* This is good for implementing stacks.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as list_add_rcu()
|
|
* or list_del_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* list_for_each_entry_rcu().
|
|
*/
|
|
static inline void list_add_rcu(struct list_head *new, struct list_head *head)
|
|
{
|
|
__list_add_rcu(new, head, head->next);
|
|
}
|
|
|
|
/**
|
|
* list_add_tail_rcu - add a new entry to rcu-protected list
|
|
* @new: new entry to be added
|
|
* @head: list head to add it before
|
|
*
|
|
* Insert a new entry before the specified head.
|
|
* This is useful for implementing queues.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as list_add_tail_rcu()
|
|
* or list_del_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* list_for_each_entry_rcu().
|
|
*/
|
|
static inline void list_add_tail_rcu(struct list_head *new,
|
|
struct list_head *head)
|
|
{
|
|
__list_add_rcu(new, head->prev, head);
|
|
}
|
|
|
|
/*
|
|
* Delete a list entry by making the prev/next entries
|
|
* point to each other.
|
|
*
|
|
* This is only for internal list manipulation where we know
|
|
* the prev/next entries already!
|
|
*/
|
|
static inline void __list_del(struct list_head * prev, struct list_head * next)
|
|
{
|
|
next->prev = prev;
|
|
prev->next = next;
|
|
}
|
|
|
|
/**
|
|
* list_del - deletes entry from list.
|
|
* @entry: the element to delete from the list.
|
|
* Note: list_empty() on entry does not return true after this, the entry is
|
|
* in an undefined state.
|
|
*/
|
|
#ifndef CONFIG_DEBUG_LIST
|
|
static inline void list_del(struct list_head *entry)
|
|
{
|
|
__list_del(entry->prev, entry->next);
|
|
entry->next = LIST_POISON1;
|
|
entry->prev = LIST_POISON2;
|
|
}
|
|
#else
|
|
extern void list_del(struct list_head *entry);
|
|
#endif
|
|
|
|
/**
|
|
* list_del_rcu - deletes entry from list without re-initialization
|
|
* @entry: the element to delete from the list.
|
|
*
|
|
* Note: list_empty() on entry does not return true after this,
|
|
* the entry is in an undefined state. It is useful for RCU based
|
|
* lockfree traversal.
|
|
*
|
|
* In particular, it means that we can not poison the forward
|
|
* pointers that may still be used for walking the list.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as list_del_rcu()
|
|
* or list_add_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* list_for_each_entry_rcu().
|
|
*
|
|
* Note that the caller is not permitted to immediately free
|
|
* the newly deleted entry. Instead, either synchronize_rcu()
|
|
* or call_rcu() must be used to defer freeing until an RCU
|
|
* grace period has elapsed.
|
|
*/
|
|
static inline void list_del_rcu(struct list_head *entry)
|
|
{
|
|
__list_del(entry->prev, entry->next);
|
|
entry->prev = LIST_POISON2;
|
|
}
|
|
|
|
/**
|
|
* list_replace - replace old entry by new one
|
|
* @old : the element to be replaced
|
|
* @new : the new element to insert
|
|
*
|
|
* If @old was empty, it will be overwritten.
|
|
*/
|
|
static inline void list_replace(struct list_head *old,
|
|
struct list_head *new)
|
|
{
|
|
new->next = old->next;
|
|
new->next->prev = new;
|
|
new->prev = old->prev;
|
|
new->prev->next = new;
|
|
}
|
|
|
|
static inline void list_replace_init(struct list_head *old,
|
|
struct list_head *new)
|
|
{
|
|
list_replace(old, new);
|
|
INIT_LIST_HEAD(old);
|
|
}
|
|
|
|
/**
|
|
* list_replace_rcu - replace old entry by new one
|
|
* @old : the element to be replaced
|
|
* @new : the new element to insert
|
|
*
|
|
* The @old entry will be replaced with the @new entry atomically.
|
|
* Note: @old should not be empty.
|
|
*/
|
|
static inline void list_replace_rcu(struct list_head *old,
|
|
struct list_head *new)
|
|
{
|
|
new->next = old->next;
|
|
new->prev = old->prev;
|
|
smp_wmb();
|
|
new->next->prev = new;
|
|
new->prev->next = new;
|
|
old->prev = LIST_POISON2;
|
|
}
|
|
|
|
/**
|
|
* list_del_init - deletes entry from list and reinitialize it.
|
|
* @entry: the element to delete from the list.
|
|
*/
|
|
static inline void list_del_init(struct list_head *entry)
|
|
{
|
|
__list_del(entry->prev, entry->next);
|
|
INIT_LIST_HEAD(entry);
|
|
}
|
|
|
|
/**
|
|
* list_move - delete from one list and add as another's head
|
|
* @list: the entry to move
|
|
* @head: the head that will precede our entry
|
|
*/
|
|
static inline void list_move(struct list_head *list, struct list_head *head)
|
|
{
|
|
__list_del(list->prev, list->next);
|
|
list_add(list, head);
|
|
}
|
|
|
|
/**
|
|
* list_move_tail - delete from one list and add as another's tail
|
|
* @list: the entry to move
|
|
* @head: the head that will follow our entry
|
|
*/
|
|
static inline void list_move_tail(struct list_head *list,
|
|
struct list_head *head)
|
|
{
|
|
__list_del(list->prev, list->next);
|
|
list_add_tail(list, head);
|
|
}
|
|
|
|
/**
|
|
* list_is_last - tests whether @list is the last entry in list @head
|
|
* @list: the entry to test
|
|
* @head: the head of the list
|
|
*/
|
|
static inline int list_is_last(const struct list_head *list,
|
|
const struct list_head *head)
|
|
{
|
|
return list->next == head;
|
|
}
|
|
|
|
/**
|
|
* list_empty - tests whether a list is empty
|
|
* @head: the list to test.
|
|
*/
|
|
static inline int list_empty(const struct list_head *head)
|
|
{
|
|
return head->next == head;
|
|
}
|
|
|
|
/**
|
|
* list_empty_careful - tests whether a list is empty and not being modified
|
|
* @head: the list to test
|
|
*
|
|
* Description:
|
|
* tests whether a list is empty _and_ checks that no other CPU might be
|
|
* in the process of modifying either member (next or prev)
|
|
*
|
|
* NOTE: using list_empty_careful() without synchronization
|
|
* can only be safe if the only activity that can happen
|
|
* to the list entry is list_del_init(). Eg. it cannot be used
|
|
* if another CPU could re-list_add() it.
|
|
*/
|
|
static inline int list_empty_careful(const struct list_head *head)
|
|
{
|
|
struct list_head *next = head->next;
|
|
return (next == head) && (next == head->prev);
|
|
}
|
|
|
|
static inline void __list_splice(struct list_head *list,
|
|
struct list_head *head)
|
|
{
|
|
struct list_head *first = list->next;
|
|
struct list_head *last = list->prev;
|
|
struct list_head *at = head->next;
|
|
|
|
first->prev = head;
|
|
head->next = first;
|
|
|
|
last->next = at;
|
|
at->prev = last;
|
|
}
|
|
|
|
/**
|
|
* list_splice - join two lists
|
|
* @list: the new list to add.
|
|
* @head: the place to add it in the first list.
|
|
*/
|
|
static inline void list_splice(struct list_head *list, struct list_head *head)
|
|
{
|
|
if (!list_empty(list))
|
|
__list_splice(list, head);
|
|
}
|
|
|
|
/**
|
|
* list_splice_init - join two lists and reinitialise the emptied list.
|
|
* @list: the new list to add.
|
|
* @head: the place to add it in the first list.
|
|
*
|
|
* The list at @list is reinitialised
|
|
*/
|
|
static inline void list_splice_init(struct list_head *list,
|
|
struct list_head *head)
|
|
{
|
|
if (!list_empty(list)) {
|
|
__list_splice(list, head);
|
|
INIT_LIST_HEAD(list);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* list_splice_init_rcu - splice an RCU-protected list into an existing list.
|
|
* @list: the RCU-protected list to splice
|
|
* @head: the place in the list to splice the first list into
|
|
* @sync: function to sync: synchronize_rcu(), synchronize_sched(), ...
|
|
*
|
|
* @head can be RCU-read traversed concurrently with this function.
|
|
*
|
|
* Note that this function blocks.
|
|
*
|
|
* Important note: the caller must take whatever action is necessary to
|
|
* prevent any other updates to @head. In principle, it is possible
|
|
* to modify the list as soon as sync() begins execution.
|
|
* If this sort of thing becomes necessary, an alternative version
|
|
* based on call_rcu() could be created. But only if -really-
|
|
* needed -- there is no shortage of RCU API members.
|
|
*/
|
|
static inline void list_splice_init_rcu(struct list_head *list,
|
|
struct list_head *head,
|
|
void (*sync)(void))
|
|
{
|
|
struct list_head *first = list->next;
|
|
struct list_head *last = list->prev;
|
|
struct list_head *at = head->next;
|
|
|
|
if (list_empty(head))
|
|
return;
|
|
|
|
/* "first" and "last" tracking list, so initialize it. */
|
|
|
|
INIT_LIST_HEAD(list);
|
|
|
|
/*
|
|
* At this point, the list body still points to the source list.
|
|
* Wait for any readers to finish using the list before splicing
|
|
* the list body into the new list. Any new readers will see
|
|
* an empty list.
|
|
*/
|
|
|
|
sync();
|
|
|
|
/*
|
|
* Readers are finished with the source list, so perform splice.
|
|
* The order is important if the new list is global and accessible
|
|
* to concurrent RCU readers. Note that RCU readers are not
|
|
* permitted to traverse the prev pointers without excluding
|
|
* this function.
|
|
*/
|
|
|
|
last->next = at;
|
|
smp_wmb();
|
|
head->next = first;
|
|
first->prev = head;
|
|
at->prev = last;
|
|
}
|
|
|
|
/**
|
|
* list_entry - get the struct for this entry
|
|
* @ptr: the &struct list_head pointer.
|
|
* @type: the type of the struct this is embedded in.
|
|
* @member: the name of the list_struct within the struct.
|
|
*/
|
|
#define list_entry(ptr, type, member) \
|
|
container_of(ptr, type, member)
|
|
|
|
/**
|
|
* list_first_entry - get the first element from a list
|
|
* @ptr: the list head to take the element from.
|
|
* @type: the type of the struct this is embedded in.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Note, that list is expected to be not empty.
|
|
*/
|
|
#define list_first_entry(ptr, type, member) \
|
|
list_entry((ptr)->next, type, member)
|
|
|
|
/**
|
|
* list_for_each - iterate over a list
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
*/
|
|
#define list_for_each(pos, head) \
|
|
for (pos = (head)->next; prefetch(pos->next), pos != (head); \
|
|
pos = pos->next)
|
|
|
|
/**
|
|
* __list_for_each - iterate over a list
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
*
|
|
* This variant differs from list_for_each() in that it's the
|
|
* simplest possible list iteration code, no prefetching is done.
|
|
* Use this for code that knows the list to be very short (empty
|
|
* or 1 entry) most of the time.
|
|
*/
|
|
#define __list_for_each(pos, head) \
|
|
for (pos = (head)->next; pos != (head); pos = pos->next)
|
|
|
|
/**
|
|
* list_for_each_prev - iterate over a list backwards
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
*/
|
|
#define list_for_each_prev(pos, head) \
|
|
for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \
|
|
pos = pos->prev)
|
|
|
|
/**
|
|
* list_for_each_safe - iterate over a list safe against removal of list entry
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @n: another &struct list_head to use as temporary storage
|
|
* @head: the head for your list.
|
|
*/
|
|
#define list_for_each_safe(pos, n, head) \
|
|
for (pos = (head)->next, n = pos->next; pos != (head); \
|
|
pos = n, n = pos->next)
|
|
|
|
/**
|
|
* list_for_each_prev_safe - iterate over a list backwards safe against removal
|
|
of list entry
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @n: another &struct list_head to use as temporary storage
|
|
* @head: the head for your list.
|
|
*/
|
|
#define list_for_each_prev_safe(pos, n, head) \
|
|
for (pos = (head)->prev, n = pos->prev; \
|
|
prefetch(pos->prev), pos != (head); \
|
|
pos = n, n = pos->prev)
|
|
|
|
/**
|
|
* list_for_each_entry - iterate over list of given type
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*/
|
|
#define list_for_each_entry(pos, head, member) \
|
|
for (pos = list_entry((head)->next, typeof(*pos), member); \
|
|
prefetch(pos->member.next), &pos->member != (head); \
|
|
pos = list_entry(pos->member.next, typeof(*pos), member))
|
|
|
|
/**
|
|
* list_for_each_entry_reverse - iterate backwards over list of given type.
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*/
|
|
#define list_for_each_entry_reverse(pos, head, member) \
|
|
for (pos = list_entry((head)->prev, typeof(*pos), member); \
|
|
prefetch(pos->member.prev), &pos->member != (head); \
|
|
pos = list_entry(pos->member.prev, typeof(*pos), member))
|
|
|
|
/**
|
|
* list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
|
|
* @pos: the type * to use as a start point
|
|
* @head: the head of the list
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Prepares a pos entry for use as a start point in list_for_each_entry_continue().
|
|
*/
|
|
#define list_prepare_entry(pos, head, member) \
|
|
((pos) ? : list_entry(head, typeof(*pos), member))
|
|
|
|
/**
|
|
* list_for_each_entry_continue - continue iteration over list of given type
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Continue to iterate over list of given type, continuing after
|
|
* the current position.
|
|
*/
|
|
#define list_for_each_entry_continue(pos, head, member) \
|
|
for (pos = list_entry(pos->member.next, typeof(*pos), member); \
|
|
prefetch(pos->member.next), &pos->member != (head); \
|
|
pos = list_entry(pos->member.next, typeof(*pos), member))
|
|
|
|
/**
|
|
* list_for_each_entry_continue_reverse - iterate backwards from the given point
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Start to iterate over list of given type backwards, continuing after
|
|
* the current position.
|
|
*/
|
|
#define list_for_each_entry_continue_reverse(pos, head, member) \
|
|
for (pos = list_entry(pos->member.prev, typeof(*pos), member); \
|
|
prefetch(pos->member.prev), &pos->member != (head); \
|
|
pos = list_entry(pos->member.prev, typeof(*pos), member))
|
|
|
|
/**
|
|
* list_for_each_entry_from - iterate over list of given type from the current point
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Iterate over list of given type, continuing from current position.
|
|
*/
|
|
#define list_for_each_entry_from(pos, head, member) \
|
|
for (; prefetch(pos->member.next), &pos->member != (head); \
|
|
pos = list_entry(pos->member.next, typeof(*pos), member))
|
|
|
|
/**
|
|
* list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @n: another type * to use as temporary storage
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*/
|
|
#define list_for_each_entry_safe(pos, n, head, member) \
|
|
for (pos = list_entry((head)->next, typeof(*pos), member), \
|
|
n = list_entry(pos->member.next, typeof(*pos), member); \
|
|
&pos->member != (head); \
|
|
pos = n, n = list_entry(n->member.next, typeof(*n), member))
|
|
|
|
/**
|
|
* list_for_each_entry_safe_continue
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @n: another type * to use as temporary storage
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Iterate over list of given type, continuing after current point,
|
|
* safe against removal of list entry.
|
|
*/
|
|
#define list_for_each_entry_safe_continue(pos, n, head, member) \
|
|
for (pos = list_entry(pos->member.next, typeof(*pos), member), \
|
|
n = list_entry(pos->member.next, typeof(*pos), member); \
|
|
&pos->member != (head); \
|
|
pos = n, n = list_entry(n->member.next, typeof(*n), member))
|
|
|
|
/**
|
|
* list_for_each_entry_safe_from
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @n: another type * to use as temporary storage
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Iterate over list of given type from current point, safe against
|
|
* removal of list entry.
|
|
*/
|
|
#define list_for_each_entry_safe_from(pos, n, head, member) \
|
|
for (n = list_entry(pos->member.next, typeof(*pos), member); \
|
|
&pos->member != (head); \
|
|
pos = n, n = list_entry(n->member.next, typeof(*n), member))
|
|
|
|
/**
|
|
* list_for_each_entry_safe_reverse
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @n: another type * to use as temporary storage
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* Iterate backwards over list of given type, safe against removal
|
|
* of list entry.
|
|
*/
|
|
#define list_for_each_entry_safe_reverse(pos, n, head, member) \
|
|
for (pos = list_entry((head)->prev, typeof(*pos), member), \
|
|
n = list_entry(pos->member.prev, typeof(*pos), member); \
|
|
&pos->member != (head); \
|
|
pos = n, n = list_entry(n->member.prev, typeof(*n), member))
|
|
|
|
/**
|
|
* list_for_each_rcu - iterate over an rcu-protected list
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
*
|
|
* This list-traversal primitive may safely run concurrently with
|
|
* the _rcu list-mutation primitives such as list_add_rcu()
|
|
* as long as the traversal is guarded by rcu_read_lock().
|
|
*/
|
|
#define list_for_each_rcu(pos, head) \
|
|
for (pos = (head)->next; \
|
|
prefetch(rcu_dereference(pos)->next), pos != (head); \
|
|
pos = pos->next)
|
|
|
|
#define __list_for_each_rcu(pos, head) \
|
|
for (pos = (head)->next; \
|
|
rcu_dereference(pos) != (head); \
|
|
pos = pos->next)
|
|
|
|
/**
|
|
* list_for_each_safe_rcu
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @n: another &struct list_head to use as temporary storage
|
|
* @head: the head for your list.
|
|
*
|
|
* Iterate over an rcu-protected list, safe against removal of list entry.
|
|
*
|
|
* This list-traversal primitive may safely run concurrently with
|
|
* the _rcu list-mutation primitives such as list_add_rcu()
|
|
* as long as the traversal is guarded by rcu_read_lock().
|
|
*/
|
|
#define list_for_each_safe_rcu(pos, n, head) \
|
|
for (pos = (head)->next; \
|
|
n = rcu_dereference(pos)->next, pos != (head); \
|
|
pos = n)
|
|
|
|
/**
|
|
* list_for_each_entry_rcu - iterate over rcu list of given type
|
|
* @pos: the type * to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the list_struct within the struct.
|
|
*
|
|
* This list-traversal primitive may safely run concurrently with
|
|
* the _rcu list-mutation primitives such as list_add_rcu()
|
|
* as long as the traversal is guarded by rcu_read_lock().
|
|
*/
|
|
#define list_for_each_entry_rcu(pos, head, member) \
|
|
for (pos = list_entry((head)->next, typeof(*pos), member); \
|
|
prefetch(rcu_dereference(pos)->member.next), \
|
|
&pos->member != (head); \
|
|
pos = list_entry(pos->member.next, typeof(*pos), member))
|
|
|
|
|
|
/**
|
|
* list_for_each_continue_rcu
|
|
* @pos: the &struct list_head to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
*
|
|
* Iterate over an rcu-protected list, continuing after current point.
|
|
*
|
|
* This list-traversal primitive may safely run concurrently with
|
|
* the _rcu list-mutation primitives such as list_add_rcu()
|
|
* as long as the traversal is guarded by rcu_read_lock().
|
|
*/
|
|
#define list_for_each_continue_rcu(pos, head) \
|
|
for ((pos) = (pos)->next; \
|
|
prefetch(rcu_dereference((pos))->next), (pos) != (head); \
|
|
(pos) = (pos)->next)
|
|
|
|
/*
|
|
* Double linked lists with a single pointer list head.
|
|
* Mostly useful for hash tables where the two pointer list head is
|
|
* too wasteful.
|
|
* You lose the ability to access the tail in O(1).
|
|
*/
|
|
|
|
struct hlist_head {
|
|
struct hlist_node *first;
|
|
};
|
|
|
|
struct hlist_node {
|
|
struct hlist_node *next, **pprev;
|
|
};
|
|
|
|
#define HLIST_HEAD_INIT { .first = NULL }
|
|
#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL }
|
|
#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
|
|
static inline void INIT_HLIST_NODE(struct hlist_node *h)
|
|
{
|
|
h->next = NULL;
|
|
h->pprev = NULL;
|
|
}
|
|
|
|
static inline int hlist_unhashed(const struct hlist_node *h)
|
|
{
|
|
return !h->pprev;
|
|
}
|
|
|
|
static inline int hlist_empty(const struct hlist_head *h)
|
|
{
|
|
return !h->first;
|
|
}
|
|
|
|
static inline void __hlist_del(struct hlist_node *n)
|
|
{
|
|
struct hlist_node *next = n->next;
|
|
struct hlist_node **pprev = n->pprev;
|
|
*pprev = next;
|
|
if (next)
|
|
next->pprev = pprev;
|
|
}
|
|
|
|
static inline void hlist_del(struct hlist_node *n)
|
|
{
|
|
__hlist_del(n);
|
|
n->next = LIST_POISON1;
|
|
n->pprev = LIST_POISON2;
|
|
}
|
|
|
|
/**
|
|
* hlist_del_rcu - deletes entry from hash list without re-initialization
|
|
* @n: the element to delete from the hash list.
|
|
*
|
|
* Note: list_unhashed() on entry does not return true after this,
|
|
* the entry is in an undefined state. It is useful for RCU based
|
|
* lockfree traversal.
|
|
*
|
|
* In particular, it means that we can not poison the forward
|
|
* pointers that may still be used for walking the hash list.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as hlist_add_head_rcu()
|
|
* or hlist_del_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* hlist_for_each_entry().
|
|
*/
|
|
static inline void hlist_del_rcu(struct hlist_node *n)
|
|
{
|
|
__hlist_del(n);
|
|
n->pprev = LIST_POISON2;
|
|
}
|
|
|
|
static inline void hlist_del_init(struct hlist_node *n)
|
|
{
|
|
if (!hlist_unhashed(n)) {
|
|
__hlist_del(n);
|
|
INIT_HLIST_NODE(n);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* hlist_replace_rcu - replace old entry by new one
|
|
* @old : the element to be replaced
|
|
* @new : the new element to insert
|
|
*
|
|
* The @old entry will be replaced with the @new entry atomically.
|
|
*/
|
|
static inline void hlist_replace_rcu(struct hlist_node *old,
|
|
struct hlist_node *new)
|
|
{
|
|
struct hlist_node *next = old->next;
|
|
|
|
new->next = next;
|
|
new->pprev = old->pprev;
|
|
smp_wmb();
|
|
if (next)
|
|
new->next->pprev = &new->next;
|
|
*new->pprev = new;
|
|
old->pprev = LIST_POISON2;
|
|
}
|
|
|
|
static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
|
|
{
|
|
struct hlist_node *first = h->first;
|
|
n->next = first;
|
|
if (first)
|
|
first->pprev = &n->next;
|
|
h->first = n;
|
|
n->pprev = &h->first;
|
|
}
|
|
|
|
|
|
/**
|
|
* hlist_add_head_rcu
|
|
* @n: the element to add to the hash list.
|
|
* @h: the list to add to.
|
|
*
|
|
* Description:
|
|
* Adds the specified element to the specified hlist,
|
|
* while permitting racing traversals.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as hlist_add_head_rcu()
|
|
* or hlist_del_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* hlist_for_each_entry_rcu(), used to prevent memory-consistency
|
|
* problems on Alpha CPUs. Regardless of the type of CPU, the
|
|
* list-traversal primitive must be guarded by rcu_read_lock().
|
|
*/
|
|
static inline void hlist_add_head_rcu(struct hlist_node *n,
|
|
struct hlist_head *h)
|
|
{
|
|
struct hlist_node *first = h->first;
|
|
n->next = first;
|
|
n->pprev = &h->first;
|
|
smp_wmb();
|
|
if (first)
|
|
first->pprev = &n->next;
|
|
h->first = n;
|
|
}
|
|
|
|
/* next must be != NULL */
|
|
static inline void hlist_add_before(struct hlist_node *n,
|
|
struct hlist_node *next)
|
|
{
|
|
n->pprev = next->pprev;
|
|
n->next = next;
|
|
next->pprev = &n->next;
|
|
*(n->pprev) = n;
|
|
}
|
|
|
|
static inline void hlist_add_after(struct hlist_node *n,
|
|
struct hlist_node *next)
|
|
{
|
|
next->next = n->next;
|
|
n->next = next;
|
|
next->pprev = &n->next;
|
|
|
|
if(next->next)
|
|
next->next->pprev = &next->next;
|
|
}
|
|
|
|
/**
|
|
* hlist_add_before_rcu
|
|
* @n: the new element to add to the hash list.
|
|
* @next: the existing element to add the new element before.
|
|
*
|
|
* Description:
|
|
* Adds the specified element to the specified hlist
|
|
* before the specified node while permitting racing traversals.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as hlist_add_head_rcu()
|
|
* or hlist_del_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* hlist_for_each_entry_rcu(), used to prevent memory-consistency
|
|
* problems on Alpha CPUs.
|
|
*/
|
|
static inline void hlist_add_before_rcu(struct hlist_node *n,
|
|
struct hlist_node *next)
|
|
{
|
|
n->pprev = next->pprev;
|
|
n->next = next;
|
|
smp_wmb();
|
|
next->pprev = &n->next;
|
|
*(n->pprev) = n;
|
|
}
|
|
|
|
/**
|
|
* hlist_add_after_rcu
|
|
* @prev: the existing element to add the new element after.
|
|
* @n: the new element to add to the hash list.
|
|
*
|
|
* Description:
|
|
* Adds the specified element to the specified hlist
|
|
* after the specified node while permitting racing traversals.
|
|
*
|
|
* The caller must take whatever precautions are necessary
|
|
* (such as holding appropriate locks) to avoid racing
|
|
* with another list-mutation primitive, such as hlist_add_head_rcu()
|
|
* or hlist_del_rcu(), running on this same list.
|
|
* However, it is perfectly legal to run concurrently with
|
|
* the _rcu list-traversal primitives, such as
|
|
* hlist_for_each_entry_rcu(), used to prevent memory-consistency
|
|
* problems on Alpha CPUs.
|
|
*/
|
|
static inline void hlist_add_after_rcu(struct hlist_node *prev,
|
|
struct hlist_node *n)
|
|
{
|
|
n->next = prev->next;
|
|
n->pprev = &prev->next;
|
|
smp_wmb();
|
|
prev->next = n;
|
|
if (n->next)
|
|
n->next->pprev = &n->next;
|
|
}
|
|
|
|
#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
|
|
|
|
#define hlist_for_each(pos, head) \
|
|
for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \
|
|
pos = pos->next)
|
|
|
|
#define hlist_for_each_safe(pos, n, head) \
|
|
for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
|
|
pos = n)
|
|
|
|
/**
|
|
* hlist_for_each_entry - iterate over list of given type
|
|
* @tpos: the type * to use as a loop cursor.
|
|
* @pos: the &struct hlist_node to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the hlist_node within the struct.
|
|
*/
|
|
#define hlist_for_each_entry(tpos, pos, head, member) \
|
|
for (pos = (head)->first; \
|
|
pos && ({ prefetch(pos->next); 1;}) && \
|
|
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
|
|
pos = pos->next)
|
|
|
|
/**
|
|
* hlist_for_each_entry_continue - iterate over a hlist continuing after current point
|
|
* @tpos: the type * to use as a loop cursor.
|
|
* @pos: the &struct hlist_node to use as a loop cursor.
|
|
* @member: the name of the hlist_node within the struct.
|
|
*/
|
|
#define hlist_for_each_entry_continue(tpos, pos, member) \
|
|
for (pos = (pos)->next; \
|
|
pos && ({ prefetch(pos->next); 1;}) && \
|
|
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
|
|
pos = pos->next)
|
|
|
|
/**
|
|
* hlist_for_each_entry_from - iterate over a hlist continuing from current point
|
|
* @tpos: the type * to use as a loop cursor.
|
|
* @pos: the &struct hlist_node to use as a loop cursor.
|
|
* @member: the name of the hlist_node within the struct.
|
|
*/
|
|
#define hlist_for_each_entry_from(tpos, pos, member) \
|
|
for (; pos && ({ prefetch(pos->next); 1;}) && \
|
|
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
|
|
pos = pos->next)
|
|
|
|
/**
|
|
* hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
|
|
* @tpos: the type * to use as a loop cursor.
|
|
* @pos: the &struct hlist_node to use as a loop cursor.
|
|
* @n: another &struct hlist_node to use as temporary storage
|
|
* @head: the head for your list.
|
|
* @member: the name of the hlist_node within the struct.
|
|
*/
|
|
#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \
|
|
for (pos = (head)->first; \
|
|
pos && ({ n = pos->next; 1; }) && \
|
|
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
|
|
pos = n)
|
|
|
|
/**
|
|
* hlist_for_each_entry_rcu - iterate over rcu list of given type
|
|
* @tpos: the type * to use as a loop cursor.
|
|
* @pos: the &struct hlist_node to use as a loop cursor.
|
|
* @head: the head for your list.
|
|
* @member: the name of the hlist_node within the struct.
|
|
*
|
|
* This list-traversal primitive may safely run concurrently with
|
|
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
|
|
* as long as the traversal is guarded by rcu_read_lock().
|
|
*/
|
|
#define hlist_for_each_entry_rcu(tpos, pos, head, member) \
|
|
for (pos = (head)->first; \
|
|
rcu_dereference(pos) && ({ prefetch(pos->next); 1;}) && \
|
|
({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
|
|
pos = pos->next)
|
|
|
|
#else
|
|
#warning "don't include kernel headers in userspace"
|
|
#endif /* __KERNEL__ */
|
|
#endif
|