redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/input/misc/cm109.c
Greg Kroah-Hartman ab242a73a1 USB: input: cm109.c: fix up dev_* messages 
Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 15:32:55 -07:00

919 lines
24 KiB
C
Raw Blame History

/*
* Driver for the VoIP USB phones with CM109 chipsets.
*
* Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*/
/*
* Tested devices:
* - Komunikate KIP1000
* - Genius G-talk
* - Allied-Telesis Corega USBPH01
* - ...
*
* This driver is based on the yealink.c driver
*
* Thanks to:
* - Authors of yealink.c
* - Thomas Reitmayr
* - Oliver Neukum for good review comments and code
* - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
* - Dmitry Torokhov for valuable input and review
*
* Todo:
* - Read/write EEPROM
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/rwsem.h>
#include <linux/usb/input.h>
#define DRIVER_VERSION "20080805"
#define DRIVER_AUTHOR "Alfred E. Heggestad"
#define DRIVER_DESC "CM109 phone driver"
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */
HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */
HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */
HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */
HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
HID_OR1 = 0x01, /* GPO - General Purpose Output */
HID_OR2 = 0x02, /* Set GPIO to input/output mode */
HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */
/* HID_IR0 */
RECORD_MUTE = 1 << 3,
PLAYBACK_MUTE = 1 << 2,
VOLUME_DOWN = 1 << 1,
VOLUME_UP = 1 << 0,
/* HID_OR0 */
/* bits 7-6
0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
and SPDIF
1: HID_OR0-3 are used as generic HID registers
2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
EEPROM_DATA0-1, EEPROM_CTRL (see Note)
3: Reserved
*/
HID_OR_GPO_BUZ_SPDIF = 0 << 6,
HID_OR_GENERIC_HID_REG = 1 << 6,
HID_OR_MAP_MCU_EEPROM = 2 << 6,
BUZZER_ON = 1 << 5,
/* up to 256 normal keys, up to 16 special keys */
KEYMAP_SIZE = 256 + 16,
};
/* CM109 protocol packet */
struct cm109_ctl_packet {
u8 byte[4];
} __attribute__ ((packed));
enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
/* CM109 device structure */
struct cm109_dev {
struct input_dev *idev; /* input device */
struct usb_device *udev; /* usb device */
struct usb_interface *intf;
/* irq input channel */
struct cm109_ctl_packet *irq_data;
dma_addr_t irq_dma;
struct urb *urb_irq;
/* control output channel */
struct cm109_ctl_packet *ctl_data;
dma_addr_t ctl_dma;
struct usb_ctrlrequest *ctl_req;
struct urb *urb_ctl;
/*
* The 3 bitfields below are protected by ctl_submit_lock.
* They have to be separate since they are accessed from IRQ
* context.
*/
unsigned irq_urb_pending:1; /* irq_urb is in flight */
unsigned ctl_urb_pending:1; /* ctl_urb is in flight */
unsigned buzzer_pending:1; /* need to issue buzz command */
spinlock_t ctl_submit_lock;
unsigned char buzzer_state; /* on/off */
/* flags */
unsigned open:1;
unsigned resetting:1;
unsigned shutdown:1;
/* This mutex protects writes to the above flags */
struct mutex pm_mutex;
unsigned short keymap[KEYMAP_SIZE];
char phys[64]; /* physical device path */
int key_code; /* last reported key */
int keybit; /* 0=new scan 1,2,4,8=scan columns */
u8 gpi; /* Cached value of GPI (high nibble) */
};
/******************************************************************************
* CM109 key interface
*****************************************************************************/
static unsigned short special_keymap(int code)
{
if (code > 0xff) {
switch (code - 0xff) {
case RECORD_MUTE: return KEY_MUTE;
case PLAYBACK_MUTE: return KEY_MUTE;
case VOLUME_DOWN: return KEY_VOLUMEDOWN;
case VOLUME_UP: return KEY_VOLUMEUP;
}
}
return KEY_RESERVED;
}
/* Map device buttons to internal key events.
*
* The "up" and "down" keys, are symbolised by arrows on the button.
* The "pickup" and "hangup" keys are symbolised by a green and red phone
* on the button.
Komunikate KIP1000 Keyboard Matrix
-> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10)
| | | |
<- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20)
| | | |
END - 7 -- 8 -- 9 --> GPI pin 6 (0x40)
| | | |
OK -- * -- 0 -- # --> GPI pin 7 (0x80)
| | | |
/|\ /|\ /|\ /|\
| | | |
GPO
pin: 3 2 1 0
0x8 0x4 0x2 0x1
*/
static unsigned short keymap_kip1000(int scancode)
{
switch (scancode) { /* phone key: */
case 0x82: return KEY_NUMERIC_0; /* 0 */
case 0x14: return KEY_NUMERIC_1; /* 1 */
case 0x12: return KEY_NUMERIC_2; /* 2 */
case 0x11: return KEY_NUMERIC_3; /* 3 */
case 0x24: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x21: return KEY_NUMERIC_6; /* 6 */
case 0x44: return KEY_NUMERIC_7; /* 7 */
case 0x42: return KEY_NUMERIC_8; /* 8 */
case 0x41: return KEY_NUMERIC_9; /* 9 */
case 0x81: return KEY_NUMERIC_POUND; /* # */
case 0x84: return KEY_NUMERIC_STAR; /* * */
case 0x88: return KEY_ENTER; /* pickup */
case 0x48: return KEY_ESC; /* hangup */
case 0x28: return KEY_LEFT; /* IN */
case 0x18: return KEY_RIGHT; /* OUT */
default: return special_keymap(scancode);
}
}
/*
Contributed by Shaun Jackman <sjackman@gmail.com>
Genius G-Talk keyboard matrix
0 1 2 3
4: 0 4 8 Talk
5: 1 5 9 End
6: 2 6 # Up
7: 3 7 * Down
*/
static unsigned short keymap_gtalk(int scancode)
{
switch (scancode) {
case 0x11: return KEY_NUMERIC_0;
case 0x21: return KEY_NUMERIC_1;
case 0x41: return KEY_NUMERIC_2;
case 0x81: return KEY_NUMERIC_3;
case 0x12: return KEY_NUMERIC_4;
case 0x22: return KEY_NUMERIC_5;
case 0x42: return KEY_NUMERIC_6;
case 0x82: return KEY_NUMERIC_7;
case 0x14: return KEY_NUMERIC_8;
case 0x24: return KEY_NUMERIC_9;
case 0x44: return KEY_NUMERIC_POUND; /* # */
case 0x84: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* Talk (green handset) */
case 0x28: return KEY_ESC; /* End (red handset) */
case 0x48: return KEY_UP; /* Menu up (rocker switch) */
case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */
default: return special_keymap(scancode);
}
}
/*
* Keymap for Allied-Telesis Corega USBPH01
* http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
*
* Contributed by july@nat.bg
*/
static unsigned short keymap_usbph01(int scancode)
{
switch (scancode) {
case 0x11: return KEY_NUMERIC_0; /* 0 */
case 0x21: return KEY_NUMERIC_1; /* 1 */
case 0x41: return KEY_NUMERIC_2; /* 2 */
case 0x81: return KEY_NUMERIC_3; /* 3 */
case 0x12: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x42: return KEY_NUMERIC_6; /* 6 */
case 0x82: return KEY_NUMERIC_7; /* 7 */
case 0x14: return KEY_NUMERIC_8; /* 8 */
case 0x24: return KEY_NUMERIC_9; /* 9 */
case 0x44: return KEY_NUMERIC_POUND; /* # */
case 0x84: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* pickup */
case 0x28: return KEY_ESC; /* hangup */
case 0x48: return KEY_LEFT; /* IN */
case 0x88: return KEY_RIGHT; /* OUT */
default: return special_keymap(scancode);
}
}
/*
* Keymap for ATCom AU-100
* http://www.atcom.cn/products.html
* http://www.packetizer.com/products/au100/
* http://www.voip-info.org/wiki/view/AU-100
*
* Contributed by daniel@gimpelevich.san-francisco.ca.us
*/
static unsigned short keymap_atcom(int scancode)
{
switch (scancode) { /* phone key: */
case 0x82: return KEY_NUMERIC_0; /* 0 */
case 0x11: return KEY_NUMERIC_1; /* 1 */
case 0x12: return KEY_NUMERIC_2; /* 2 */
case 0x14: return KEY_NUMERIC_3; /* 3 */
case 0x21: return KEY_NUMERIC_4; /* 4 */
case 0x22: return KEY_NUMERIC_5; /* 5 */
case 0x24: return KEY_NUMERIC_6; /* 6 */
case 0x41: return KEY_NUMERIC_7; /* 7 */
case 0x42: return KEY_NUMERIC_8; /* 8 */
case 0x44: return KEY_NUMERIC_9; /* 9 */
case 0x84: return KEY_NUMERIC_POUND; /* # */
case 0x81: return KEY_NUMERIC_STAR; /* * */
case 0x18: return KEY_ENTER; /* pickup */
case 0x28: return KEY_ESC; /* hangup */
case 0x48: return KEY_LEFT; /* left arrow */
case 0x88: return KEY_RIGHT; /* right arrow */
default: return special_keymap(scancode);
}
}
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
* Completes a request by converting the data into events for the
* input subsystem.
*/
static void report_key(struct cm109_dev *dev, int key)
{
struct input_dev *idev = dev->idev;
if (dev->key_code >= 0) {
/* old key up */
input_report_key(idev, dev->key_code, 0);
}
dev->key_code = key;
if (key >= 0) {
/* new valid key */
input_report_key(idev, key, 1);
}
input_sync(idev);
}
/******************************************************************************
* CM109 usb communication interface
*****************************************************************************/
static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
{
int error;
if (dev->buzzer_state)
dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
else
dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
if (error)
dev_err(&dev->intf->dev,
"%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
}
/*
* IRQ handler
*/
static void cm109_urb_irq_callback(struct urb *urb)
{
struct cm109_dev *dev = urb->context;
const int status = urb->status;
int error;
dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
dev->irq_data->byte[0],
dev->irq_data->byte[1],
dev->irq_data->byte[2],
dev->irq_data->byte[3],
dev->keybit);
if (status) {
if (status == -ESHUTDOWN)
return;
dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
}
/* Special keys */
if (dev->irq_data->byte[HID_IR0] & 0x0f) {
const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
report_key(dev, dev->keymap[0xff + code]);
}
/* Scan key column */
if (dev->keybit == 0xf) {
/* Any changes ? */
if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
goto out;
dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
dev->keybit = 0x1;
} else {
report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
dev->keybit <<= 1;
if (dev->keybit > 0x8)
dev->keybit = 0xf;
}
out:
spin_lock(&dev->ctl_submit_lock);
dev->irq_urb_pending = 0;
if (likely(!dev->shutdown)) {
if (dev->buzzer_state)
dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
else
dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
dev->ctl_data->byte[HID_OR1] = dev->keybit;
dev->ctl_data->byte[HID_OR2] = dev->keybit;
dev->buzzer_pending = 0;
dev->ctl_urb_pending = 1;
error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
if (error)
dev_err(&dev->intf->dev,
"%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
}
spin_unlock(&dev->ctl_submit_lock);
}
static void cm109_urb_ctl_callback(struct urb *urb)
{
struct cm109_dev *dev = urb->context;
const int status = urb->status;
int error;
dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
dev->ctl_data->byte[0],
dev->ctl_data->byte[1],
dev->ctl_data->byte[2],
dev->ctl_data->byte[3]);
if (status)
dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
spin_lock(&dev->ctl_submit_lock);
dev->ctl_urb_pending = 0;
if (likely(!dev->shutdown)) {
if (dev->buzzer_pending) {
dev->buzzer_pending = 0;
dev->ctl_urb_pending = 1;
cm109_submit_buzz_toggle(dev);
} else if (likely(!dev->irq_urb_pending)) {
/* ask for key data */
dev->irq_urb_pending = 1;
error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
if (error)
dev_err(&dev->intf->dev,
"%s: usb_submit_urb (urb_irq) failed %d\n",
__func__, error);
}
}
spin_unlock(&dev->ctl_submit_lock);
}
static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
{
unsigned long flags;
spin_lock_irqsave(&dev->ctl_submit_lock, flags);
if (dev->ctl_urb_pending) {
/* URB completion will resubmit */
dev->buzzer_pending = 1;
} else {
dev->ctl_urb_pending = 1;
cm109_submit_buzz_toggle(dev);
}
spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
}
static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
{
int error;
if (on)
dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
else
dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
error = usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
dev->ctl_req->bRequest,
dev->ctl_req->bRequestType,
le16_to_cpu(dev->ctl_req->wValue),
le16_to_cpu(dev->ctl_req->wIndex),
dev->ctl_data,
USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
if (error < 0 && error != -EINTR)
dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
__func__, error);
}
static void cm109_stop_traffic(struct cm109_dev *dev)
{
dev->shutdown = 1;
/*
* Make sure other CPUs see this
*/
smp_wmb();
usb_kill_urb(dev->urb_ctl);
usb_kill_urb(dev->urb_irq);
cm109_toggle_buzzer_sync(dev, 0);
dev->shutdown = 0;
smp_wmb();
}
static void cm109_restore_state(struct cm109_dev *dev)
{
if (dev->open) {
/*
* Restore buzzer state.
* This will also kick regular URB submission
*/
cm109_toggle_buzzer_async(dev);
}
}
/******************************************************************************
* input event interface
*****************************************************************************/
static int cm109_input_open(struct input_dev *idev)
{
struct cm109_dev *dev = input_get_drvdata(idev);
int error;
error = usb_autopm_get_interface(dev->intf);
if (error < 0) {
dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
__func__, error);
return error;
}
mutex_lock(&dev->pm_mutex);
dev->buzzer_state = 0;
dev->key_code = -1; /* no keys pressed */
dev->keybit = 0xf;
/* issue INIT */
dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
dev->ctl_data->byte[HID_OR1] = dev->keybit;
dev->ctl_data->byte[HID_OR2] = dev->keybit;
dev->ctl_data->byte[HID_OR3] = 0x00;
error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
if (error)
dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
else
dev->open = 1;
mutex_unlock(&dev->pm_mutex);
if (error)
usb_autopm_put_interface(dev->intf);
return error;
}
static void cm109_input_close(struct input_dev *idev)
{
struct cm109_dev *dev = input_get_drvdata(idev);
mutex_lock(&dev->pm_mutex);
/*
* Once we are here event delivery is stopped so we
* don't need to worry about someone starting buzzer
* again
*/
cm109_stop_traffic(dev);
dev->open = 0;
mutex_unlock(&dev->pm_mutex);
usb_autopm_put_interface(dev->intf);
}
static int cm109_input_ev(struct input_dev *idev, unsigned int type,
unsigned int code, int value)
{
struct cm109_dev *dev = input_get_drvdata(idev);
dev_dbg(&dev->intf->dev,
"input_ev: type=%u code=%u value=%d\n", type, code, value);
if (type != EV_SND)
return -EINVAL;
switch (code) {
case SND_TONE:
case SND_BELL:
dev->buzzer_state = !!value;
if (!dev->resetting)
cm109_toggle_buzzer_async(dev);
return 0;
default:
return -EINVAL;
}
}
/******************************************************************************
* Linux interface and usb initialisation
*****************************************************************************/
struct driver_info {
char *name;
};
static const struct driver_info info_cm109 = {
.name = "CM109 USB driver",
};
enum {
VENDOR_ID = 0x0d8c, /* C-Media Electronics */
PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
};
/* table of devices that work with this driver */
static const struct usb_device_id cm109_usb_table[] = {
{
.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = VENDOR_ID,
.idProduct = PRODUCT_ID_CM109,
.bInterfaceClass = USB_CLASS_HID,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.driver_info = (kernel_ulong_t) &info_cm109
},
/* you can add more devices here with product ID 0x0008 - 0x000f */
{ }
};
static void cm109_usb_cleanup(struct cm109_dev *dev)
{
kfree(dev->ctl_req);
if (dev->ctl_data)
usb_free_coherent(dev->udev, USB_PKT_LEN,
dev->ctl_data, dev->ctl_dma);
if (dev->irq_data)
usb_free_coherent(dev->udev, USB_PKT_LEN,
dev->irq_data, dev->irq_dma);
usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */
usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */
kfree(dev);
}
static void cm109_usb_disconnect(struct usb_interface *interface)
{
struct cm109_dev *dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
input_unregister_device(dev->idev);
cm109_usb_cleanup(dev);
}
static int cm109_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct driver_info *nfo = (struct driver_info *)id->driver_info;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct cm109_dev *dev;
struct input_dev *input_dev = NULL;
int ret, pipe, i;
int error = -ENOMEM;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
spin_lock_init(&dev->ctl_submit_lock);
mutex_init(&dev->pm_mutex);
dev->udev = udev;
dev->intf = intf;
dev->idev = input_dev = input_allocate_device();
if (!input_dev)
goto err_out;
/* allocate usb buffers */
dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
GFP_KERNEL, &dev->irq_dma);
if (!dev->irq_data)
goto err_out;
dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
GFP_KERNEL, &dev->ctl_dma);
if (!dev->ctl_data)
goto err_out;
dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
if (!dev->ctl_req)
goto err_out;
/* allocate urb structures */
dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb_irq)
goto err_out;
dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb_ctl)
goto err_out;
/* get a handle to the interrupt data pipe */
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
if (ret != USB_PKT_LEN)
dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
ret, USB_PKT_LEN);
/* initialise irq urb */
usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
USB_PKT_LEN,
cm109_urb_irq_callback, dev, endpoint->bInterval);
dev->urb_irq->transfer_dma = dev->irq_dma;
dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
dev->urb_irq->dev = udev;
/* initialise ctl urb */
dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
USB_DIR_OUT;
dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
dev->ctl_req->wValue = cpu_to_le16(0x200);
dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
(void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
cm109_urb_ctl_callback, dev);
dev->urb_ctl->transfer_dma = dev->ctl_dma;
dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
dev->urb_ctl->dev = udev;
/* find out the physical bus location */
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
/* register settings for the input device */
input_dev->name = nfo->name;
input_dev->phys = dev->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev;
input_set_drvdata(input_dev, dev);
input_dev->open = cm109_input_open;
input_dev->close = cm109_input_close;
input_dev->event = cm109_input_ev;
input_dev->keycode = dev->keymap;
input_dev->keycodesize = sizeof(unsigned char);
input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
/* register available key events */
for (i = 0; i < KEYMAP_SIZE; i++) {
unsigned short k = keymap(i);
dev->keymap[i] = k;
__set_bit(k, input_dev->keybit);
}
__clear_bit(KEY_RESERVED, input_dev->keybit);
error = input_register_device(dev->idev);
if (error)
goto err_out;
usb_set_intfdata(intf, dev);
return 0;
err_out:
input_free_device(input_dev);
cm109_usb_cleanup(dev);
return error;
}
static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
mutex_lock(&dev->pm_mutex);
cm109_stop_traffic(dev);
mutex_unlock(&dev->pm_mutex);
return 0;
}
static int cm109_usb_resume(struct usb_interface *intf)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
dev_info(&intf->dev, "cm109: usb_resume\n");
mutex_lock(&dev->pm_mutex);
cm109_restore_state(dev);
mutex_unlock(&dev->pm_mutex);
return 0;
}
static int cm109_usb_pre_reset(struct usb_interface *intf)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
mutex_lock(&dev->pm_mutex);
/*
* Make sure input events don't try to toggle buzzer
* while we are resetting
*/
dev->resetting = 1;
smp_wmb();
cm109_stop_traffic(dev);
return 0;
}
static int cm109_usb_post_reset(struct usb_interface *intf)
{
struct cm109_dev *dev = usb_get_intfdata(intf);
dev->resetting = 0;
smp_wmb();
cm109_restore_state(dev);
mutex_unlock(&dev->pm_mutex);
return 0;
}
static struct usb_driver cm109_driver = {
.name = "cm109",
.probe = cm109_usb_probe,
.disconnect = cm109_usb_disconnect,
.suspend = cm109_usb_suspend,
.resume = cm109_usb_resume,
.reset_resume = cm109_usb_resume,
.pre_reset = cm109_usb_pre_reset,
.post_reset = cm109_usb_post_reset,
.id_table = cm109_usb_table,
.supports_autosuspend = 1,
};
static int __init cm109_select_keymap(void)
{
/* Load the phone keymap */
if (!strcasecmp(phone, "kip1000")) {
keymap = keymap_kip1000;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Komunikate KIP1000 phone loaded\n");
} else if (!strcasecmp(phone, "gtalk")) {
keymap = keymap_gtalk;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Genius G-talk phone loaded\n");
} else if (!strcasecmp(phone, "usbph01")) {
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
} else if (!strcasecmp(phone, "atcom")) {
keymap = keymap_atcom;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
return -EINVAL;
}
return 0;
}
static int __init cm109_init(void)
{
int err;
err = cm109_select_keymap();
if (err)
return err;
err = usb_register(&cm109_driver);
if (err)
return err;
printk(KERN_INFO KBUILD_MODNAME ": "
DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
return 0;
}
static void __exit cm109_exit(void)
{
usb_deregister(&cm109_driver);
}
module_init(cm109_init);
module_exit(cm109_exit);
MODULE_DEVICE_TABLE(usb, cm109_usb_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
View git blame Copy permalink