redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/rk3036.dtsi
Heiko Stuebner fbf15046f1 ARM: dts: rockchip: move rk3036 memory definition to board files 
The amount of available memory is clearly a board-specific value, so
the core per-soc dtsi should not define a default of any sort.
Therefore move the memory-nodes to the two board files.

Also fix the amount of memory on Kylin (512MB instead of 1GB).
While in most cases the bootloader will override this with the
actual amount of memory, there is no need to keep known wrong values
in the board-dts.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-06 16:30:33 -07:00

762 lines
19 KiB
Plaintext
Raw Blame History

/*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3036-cru.h>
#include "skeleton.dtsi"
/ {
compatible = "rockchip,rk3036";
interrupt-parent = <&gic>;
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
mshc0 = &emmc;
mshc1 = &sdmmc;
mshc2 = &sdio;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
spi = &spi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "rockchip,rk3036-smp";
cpu0: cpu@f00 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
resets = <&cru SRST_CORE0>;
operating-points = <
/* KHz uV */
816000 1000000
>;
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
};
cpu1: cpu@f01 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf01>;
resets = <&cru SRST_CORE1>;
};
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pdma: pdma@20078000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20078000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
arm,pl330-broken-no-flushp;
clocks = <&cru ACLK_DMAC2>;
clock-names = "apb_pclk";
};
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vop_out>;
};
timer {
compatible = "arm,armv7-timer";
arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
};
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xin24m";
#clock-cells = <0>;
};
bus_intmem@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x2000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x10080000 0x2000>;
smp-sram@0 {
compatible = "rockchip,rk3066-smp-sram";
reg = <0x00 0x10>;
};
};
vop: vop@10118000 {
compatible = "rockchip,rk3036-vop";
reg = <0x10118000 0x19c>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vop_mmu>;
status = "disabled";
vop_out: port {
#address-cells = <1>;
#size-cells = <0>;
vop_out_hdmi: endpoint@0 {
reg = <0>;
remote-endpoint = <&hdmi_in_vop>;
};
};
};
vop_mmu: iommu@10118300 {
compatible = "rockchip,iommu";
reg = <0x10118300 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
#iommu-cells = <0>;
status = "disabled";
};
gic: interrupt-controller@10139000 {
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <0>;
reg = <0x10139000 0x1000>,
<0x1013a000 0x1000>,
<0x1013c000 0x2000>,
<0x1013e000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
usb_otg: usb@10180000 {
compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x10180000 0x40000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <275>;
g-tx-fifo-size = <256 128 128 64 64 32>;
g-use-dma;
status = "disabled";
};
usb_host: usb@101c0000 {
compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x101c0000 0x40000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG1>;
clock-names = "otg";
dr_mode = "host";
status = "disabled";
};
emac: ethernet@10200000 {
compatible = "rockchip,rk3036-emac", "snps,arc-emac";
reg = <0x10200000 0x4000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
rockchip,grf = <&grf>;
clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
clock-names = "hclk", "macref", "macclk";
/*
* Fix the emac parent clock is DPLL instead of APLL.
* since that will cause some unstable things if the cpufreq
* is working. (e.g: the accurate 50MHz what mac_ref need)
*/
assigned-clocks = <&cru SCLK_MACPLL>;
assigned-clock-parents = <&cru PLL_DPLL>;
max-speed = <100>;
phy-mode = "rmii";
status = "disabled";
};
sdmmc: dwmmc@10214000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
clock-frequency = <37500000>;
clock-freq-min-max = <400000 37500000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sdio: dwmmc@10218000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10218000 0x4000>;
clock-freq-min-max = <400000 37500000>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
fifo-depth = <0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
emmc: dwmmc@1021c000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x1021c000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
cap-mmc-highspeed;
clock-frequency = <37500000>;
clock-freq-min-max = <400000 37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
default-sample-phase = <158>;
disable-wp;
dmas = <&pdma 12>;
dma-names = "rx-tx";
fifo-depth = <0x100>;
mmc-ddr-1_8v;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
status = "disabled";
};
i2s: i2s@10220000 {
compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
reg = <0x10220000 0x4000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
dmas = <&pdma 0>, <&pdma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s_bus>;
status = "disabled";
};
cru: clock-controller@20000000 {
compatible = "rockchip,rk3036-cru";
reg = <0x20000000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks = <&cru PLL_GPLL>;
assigned-clock-rates = <594000000>;
};
grf: syscon@20008000 {
compatible = "rockchip,rk3036-grf", "syscon";
reg = <0x20008000 0x1000>;
};
acodec: acodec-ana@20030000 {
compatible = "rk3036-codec";
reg = <0x20030000 0x4000>;
rockchip,grf = <&grf>;
clock-names = "acodec_pclk";
clocks = <&cru PCLK_ACODEC>;
status = "disabled";
};
hdmi: hdmi@20034000 {
compatible = "rockchip,rk3036-inno-hdmi";
reg = <0x20034000 0x4000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>;
clock-names = "pclk";
rockchip,grf = <&grf>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_ctl>;
status = "disabled";
hdmi_in: port {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in_vop: endpoint@0 {
reg = <0>;
remote-endpoint = <&vop_out_hdmi>;
};
};
};
timer: timer@20044000 {
compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
reg = <0x20044000 0x20>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>, <&cru PCLK_TIMER>;
clock-names = "timer", "pclk";
};
pwm0: pwm@20050000 {
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
reg = <0x20050000 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
status = "disabled";
};
pwm1: pwm@20050010 {
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
reg = <0x20050010 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
status = "disabled";
};
pwm2: pwm@20050020 {
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
reg = <0x20050020 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
status = "disabled";
};
pwm3: pwm@20050030 {
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
reg = <0x20050030 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
status = "disabled";
};
i2c1: i2c@20056000 {
compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
reg = <0x20056000 0x1000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
status = "disabled";
};
i2c2: i2c@2005a000 {
compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
reg = <0x2005a000 0x1000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
status = "disabled";
};
uart0: serial@20060000 {
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
reg = <0x20060000 0x100>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "disabled";
};
uart1: serial@20064000 {
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
reg = <0x20064000 0x100>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
status = "disabled";
};
uart2: serial@20068000 {
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
reg = <0x20068000 0x100>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
status = "disabled";
};
i2c0: i2c@20072000 {
compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
reg = <0x20072000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
status = "disabled";
};
spi: spi@20074000 {
compatible = "rockchip,rockchip-spi";
reg = <0x20074000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
clock-names = "apb-pclk","spi_pclk";
dmas = <&pdma 8>, <&pdma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pinctrl: pinctrl {
compatible = "rockchip,rk3036-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@2007c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2007c000 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_default: pcfg_pull_default {
bias-pull-pin-default;
};
pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins = <0 1 2 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
rockchip,pins = <0 27 1 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
};
sdmmc_cd: sdmcc-cd {
rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
};
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
<1 19 RK_FUNC_1 &pcfg_pull_default>,
<1 20 RK_FUNC_1 &pcfg_pull_default>,
<1 21 RK_FUNC_1 &pcfg_pull_default>;
};
};
sdio {
sdio_bus1: sdio-bus1 {
rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
};
sdio_bus4: sdio-bus4 {
rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
<0 12 RK_FUNC_1 &pcfg_pull_default>,
<0 13 RK_FUNC_1 &pcfg_pull_default>,
<0 14 RK_FUNC_1 &pcfg_pull_default>;
};
sdio_cmd: sdio-cmd {
rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
};
sdio_clk: sdio-clk {
rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
};
};
emmc {
/*
* We run eMMC at max speed; bump up drive strength.
* We also have external pulls, so disable the internal ones.
*/
emmc_clk: emmc-clk {
rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
};
emmc_bus8: emmc-bus8 {
rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
<1 25 RK_FUNC_2 &pcfg_pull_default>,
<1 26 RK_FUNC_2 &pcfg_pull_default>,
<1 27 RK_FUNC_2 &pcfg_pull_default>,
<1 28 RK_FUNC_2 &pcfg_pull_default>,
<1 29 RK_FUNC_2 &pcfg_pull_default>,
<1 30 RK_FUNC_2 &pcfg_pull_default>,
<1 31 RK_FUNC_2 &pcfg_pull_default>;
};
};
emac {
emac_xfer: emac-xfer {
rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
<2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
<2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
<2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
<2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
<2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
<2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
<2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
};
emac_mdio: emac-mdio {
rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
<2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
<0 1 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
<0 3 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
<2 21 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2s {
i2s_bus: i2s-bus {
rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
<1 1 RK_FUNC_1 &pcfg_pull_default>,
<1 2 RK_FUNC_1 &pcfg_pull_default>,
<1 3 RK_FUNC_1 &pcfg_pull_default>,
<1 4 RK_FUNC_1 &pcfg_pull_default>,
<1 5 RK_FUNC_1 &pcfg_pull_default>;
};
};
hdmi {
hdmi_ctl: hdmi-ctl {
rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
<1 9 RK_FUNC_1 &pcfg_pull_none>,
<1 10 RK_FUNC_1 &pcfg_pull_none>,
<1 11 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
<0 17 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
};
uart0_rts: uart0-rts {
rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
<2 23 RK_FUNC_1 &pcfg_pull_none>;
};
/* no rts / cts for uart1 */
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
<1 19 RK_FUNC_2 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
};
spi {
spi_txd:spi-txd {
rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
};
spi_rxd:spi-rxd {
rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
};
spi_clk:spi-clk {
rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
};
spi_cs0:spi-cs0 {
rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
};
spi_cs1:spi-cs1 {
rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
};
};
};
};
View git blame Copy permalink