![Lucas Stach](/assets/img/avatar_default.png)
This adds support for the i.MX6 QUadPlus PRG unit. It glues together the IPU and the PRE units. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- v4: add missing ipu_soc->prg_priv
425 lines
10 KiB
C
425 lines
10 KiB
C
/*
|
|
* Copyright (c) 2016-2017 Lucas Stach, Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <drm/drm_fourcc.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <video/imx-ipu-v3.h>
|
|
|
|
#include "ipu-prv.h"
|
|
|
|
#define IPU_PRG_CTL 0x00
|
|
#define IPU_PRG_CTL_BYPASS(i) (1 << (0 + i))
|
|
#define IPU_PRG_CTL_SOFT_ARID_MASK 0x3
|
|
#define IPU_PRG_CTL_SOFT_ARID_SHIFT(i) (8 + i * 2)
|
|
#define IPU_PRG_CTL_SOFT_ARID(i, v) ((v & 0x3) << (8 + 2 * i))
|
|
#define IPU_PRG_CTL_SO(i) (1 << (16 + i))
|
|
#define IPU_PRG_CTL_VFLIP(i) (1 << (19 + i))
|
|
#define IPU_PRG_CTL_BLOCK_MODE(i) (1 << (22 + i))
|
|
#define IPU_PRG_CTL_CNT_LOAD_EN(i) (1 << (25 + i))
|
|
#define IPU_PRG_CTL_SOFTRST (1 << 30)
|
|
#define IPU_PRG_CTL_SHADOW_EN (1 << 31)
|
|
|
|
#define IPU_PRG_STATUS 0x04
|
|
#define IPU_PRG_STATUS_BUFFER0_READY(i) (1 << (0 + i * 2))
|
|
#define IPU_PRG_STATUS_BUFFER1_READY(i) (1 << (1 + i * 2))
|
|
|
|
#define IPU_PRG_QOS 0x08
|
|
#define IPU_PRG_QOS_ARID_MASK 0xf
|
|
#define IPU_PRG_QOS_ARID_SHIFT(i) (0 + i * 4)
|
|
|
|
#define IPU_PRG_REG_UPDATE 0x0c
|
|
#define IPU_PRG_REG_UPDATE_REG_UPDATE (1 << 0)
|
|
|
|
#define IPU_PRG_STRIDE(i) (0x10 + i * 0x4)
|
|
#define IPU_PRG_STRIDE_STRIDE_MASK 0x3fff
|
|
|
|
#define IPU_PRG_CROP_LINE 0x1c
|
|
|
|
#define IPU_PRG_THD 0x20
|
|
|
|
#define IPU_PRG_BADDR(i) (0x24 + i * 0x4)
|
|
|
|
#define IPU_PRG_OFFSET(i) (0x30 + i * 0x4)
|
|
|
|
#define IPU_PRG_ILO(i) (0x3c + i * 0x4)
|
|
|
|
#define IPU_PRG_HEIGHT(i) (0x48 + i * 0x4)
|
|
#define IPU_PRG_HEIGHT_PRE_HEIGHT_MASK 0xfff
|
|
#define IPU_PRG_HEIGHT_PRE_HEIGHT_SHIFT 0
|
|
#define IPU_PRG_HEIGHT_IPU_HEIGHT_MASK 0xfff
|
|
#define IPU_PRG_HEIGHT_IPU_HEIGHT_SHIFT 16
|
|
|
|
struct ipu_prg_channel {
|
|
bool enabled;
|
|
int used_pre;
|
|
};
|
|
|
|
struct ipu_prg {
|
|
struct list_head list;
|
|
struct device *dev;
|
|
int id;
|
|
|
|
void __iomem *regs;
|
|
struct clk *clk_ipg, *clk_axi;
|
|
struct regmap *iomuxc_gpr;
|
|
struct ipu_pre *pres[3];
|
|
|
|
struct ipu_prg_channel chan[3];
|
|
};
|
|
|
|
static DEFINE_MUTEX(ipu_prg_list_mutex);
|
|
static LIST_HEAD(ipu_prg_list);
|
|
|
|
struct ipu_prg *
|
|
ipu_prg_lookup_by_phandle(struct device *dev, const char *name, int ipu_id)
|
|
{
|
|
struct device_node *prg_node = of_parse_phandle(dev->of_node,
|
|
name, 0);
|
|
struct ipu_prg *prg;
|
|
|
|
mutex_lock(&ipu_prg_list_mutex);
|
|
list_for_each_entry(prg, &ipu_prg_list, list) {
|
|
if (prg_node == prg->dev->of_node) {
|
|
mutex_unlock(&ipu_prg_list_mutex);
|
|
device_link_add(dev, prg->dev, DL_FLAG_AUTOREMOVE);
|
|
prg->id = ipu_id;
|
|
return prg;
|
|
}
|
|
}
|
|
mutex_unlock(&ipu_prg_list_mutex);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
int ipu_prg_max_active_channels(void)
|
|
{
|
|
return ipu_pre_get_available_count();
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_max_active_channels);
|
|
|
|
bool ipu_prg_present(struct ipu_soc *ipu)
|
|
{
|
|
if (ipu->prg_priv)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_present);
|
|
|
|
bool ipu_prg_format_supported(struct ipu_soc *ipu, uint32_t format,
|
|
uint64_t modifier)
|
|
{
|
|
const struct drm_format_info *info = drm_format_info(format);
|
|
|
|
if (info->num_planes != 1)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_format_supported);
|
|
|
|
int ipu_prg_enable(struct ipu_soc *ipu)
|
|
{
|
|
struct ipu_prg *prg = ipu->prg_priv;
|
|
int ret;
|
|
|
|
if (!prg)
|
|
return 0;
|
|
|
|
ret = clk_prepare_enable(prg->clk_axi);
|
|
if (ret)
|
|
goto fail_disable_ipg;
|
|
|
|
return 0;
|
|
|
|
fail_disable_ipg:
|
|
clk_disable_unprepare(prg->clk_ipg);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_enable);
|
|
|
|
void ipu_prg_disable(struct ipu_soc *ipu)
|
|
{
|
|
struct ipu_prg *prg = ipu->prg_priv;
|
|
|
|
if (!prg)
|
|
return;
|
|
|
|
clk_disable_unprepare(prg->clk_axi);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_disable);
|
|
|
|
/*
|
|
* The channel configuartion functions below are not thread safe, as they
|
|
* must be only called from the atomic commit path in the DRM driver, which
|
|
* is properly serialized.
|
|
*/
|
|
static int ipu_prg_ipu_to_prg_chan(int ipu_chan)
|
|
{
|
|
/*
|
|
* This isn't clearly documented in the RM, but IPU to PRG channel
|
|
* assignment is fixed, as only with this mapping the control signals
|
|
* match up.
|
|
*/
|
|
switch (ipu_chan) {
|
|
case IPUV3_CHANNEL_MEM_BG_SYNC:
|
|
return 0;
|
|
case IPUV3_CHANNEL_MEM_FG_SYNC:
|
|
return 1;
|
|
case IPUV3_CHANNEL_MEM_DC_SYNC:
|
|
return 2;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ipu_prg_get_pre(struct ipu_prg *prg, int prg_chan)
|
|
{
|
|
int i, ret;
|
|
|
|
/* channel 0 is special as it is hardwired to one of the PREs */
|
|
if (prg_chan == 0) {
|
|
ret = ipu_pre_get(prg->pres[0]);
|
|
if (ret)
|
|
goto fail;
|
|
prg->chan[prg_chan].used_pre = 0;
|
|
return 0;
|
|
}
|
|
|
|
for (i = 1; i < 3; i++) {
|
|
ret = ipu_pre_get(prg->pres[i]);
|
|
if (!ret) {
|
|
u32 val, mux;
|
|
int shift;
|
|
|
|
prg->chan[prg_chan].used_pre = i;
|
|
|
|
/* configure the PRE to PRG channel mux */
|
|
shift = (i == 1) ? 12 : 14;
|
|
mux = (prg->id << 1) | (prg_chan - 1);
|
|
regmap_update_bits(prg->iomuxc_gpr, IOMUXC_GPR5,
|
|
0x3 << shift, mux << shift);
|
|
|
|
/* check other mux, must not point to same channel */
|
|
shift = (i == 1) ? 14 : 12;
|
|
regmap_read(prg->iomuxc_gpr, IOMUXC_GPR5, &val);
|
|
if (((val >> shift) & 0x3) == mux) {
|
|
regmap_update_bits(prg->iomuxc_gpr, IOMUXC_GPR5,
|
|
0x3 << shift,
|
|
(mux ^ 0x1) << shift);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
fail:
|
|
dev_err(prg->dev, "could not get PRE for PRG chan %d", prg_chan);
|
|
return ret;
|
|
}
|
|
|
|
static void ipu_prg_put_pre(struct ipu_prg *prg, int prg_chan)
|
|
{
|
|
struct ipu_prg_channel *chan = &prg->chan[prg_chan];
|
|
|
|
ipu_pre_put(prg->pres[chan->used_pre]);
|
|
chan->used_pre = -1;
|
|
}
|
|
|
|
void ipu_prg_channel_disable(struct ipuv3_channel *ipu_chan)
|
|
{
|
|
int prg_chan = ipu_prg_ipu_to_prg_chan(ipu_chan->num);
|
|
struct ipu_prg *prg = ipu_chan->ipu->prg_priv;
|
|
struct ipu_prg_channel *chan = &prg->chan[prg_chan];
|
|
u32 val;
|
|
|
|
if (!chan->enabled || prg_chan < 0)
|
|
return;
|
|
|
|
clk_prepare_enable(prg->clk_ipg);
|
|
|
|
val = readl(prg->regs + IPU_PRG_CTL);
|
|
val |= IPU_PRG_CTL_BYPASS(prg_chan);
|
|
writel(val, prg->regs + IPU_PRG_CTL);
|
|
|
|
val = IPU_PRG_REG_UPDATE_REG_UPDATE;
|
|
writel(val, prg->regs + IPU_PRG_REG_UPDATE);
|
|
|
|
clk_disable_unprepare(prg->clk_ipg);
|
|
|
|
ipu_prg_put_pre(prg, prg_chan);
|
|
|
|
chan->enabled = false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_channel_disable);
|
|
|
|
int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
|
|
unsigned int axi_id, unsigned int width,
|
|
unsigned int height, unsigned int stride,
|
|
u32 format, unsigned long *eba)
|
|
{
|
|
int prg_chan = ipu_prg_ipu_to_prg_chan(ipu_chan->num);
|
|
struct ipu_prg *prg = ipu_chan->ipu->prg_priv;
|
|
struct ipu_prg_channel *chan = &prg->chan[prg_chan];
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (prg_chan < 0)
|
|
return prg_chan;
|
|
|
|
if (chan->enabled) {
|
|
ipu_pre_update(prg->pres[chan->used_pre], *eba);
|
|
return 0;
|
|
}
|
|
|
|
ret = ipu_prg_get_pre(prg, prg_chan);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ipu_pre_configure(prg->pres[chan->used_pre],
|
|
width, height, stride, format, *eba);
|
|
|
|
|
|
ret = clk_prepare_enable(prg->clk_ipg);
|
|
if (ret) {
|
|
ipu_prg_put_pre(prg, prg_chan);
|
|
return ret;
|
|
}
|
|
|
|
val = (stride - 1) & IPU_PRG_STRIDE_STRIDE_MASK;
|
|
writel(val, prg->regs + IPU_PRG_STRIDE(prg_chan));
|
|
|
|
val = ((height & IPU_PRG_HEIGHT_PRE_HEIGHT_MASK) <<
|
|
IPU_PRG_HEIGHT_PRE_HEIGHT_SHIFT) |
|
|
((height & IPU_PRG_HEIGHT_IPU_HEIGHT_MASK) <<
|
|
IPU_PRG_HEIGHT_IPU_HEIGHT_SHIFT);
|
|
writel(val, prg->regs + IPU_PRG_HEIGHT(prg_chan));
|
|
|
|
val = ipu_pre_get_baddr(prg->pres[chan->used_pre]);
|
|
*eba = val;
|
|
writel(val, prg->regs + IPU_PRG_BADDR(prg_chan));
|
|
|
|
val = readl(prg->regs + IPU_PRG_CTL);
|
|
/* counter load enable */
|
|
val |= IPU_PRG_CTL_CNT_LOAD_EN(prg_chan);
|
|
/* config AXI ID */
|
|
val &= ~(IPU_PRG_CTL_SOFT_ARID_MASK <<
|
|
IPU_PRG_CTL_SOFT_ARID_SHIFT(prg_chan));
|
|
val |= IPU_PRG_CTL_SOFT_ARID(prg_chan, axi_id);
|
|
/* enable channel */
|
|
val &= ~IPU_PRG_CTL_BYPASS(prg_chan);
|
|
writel(val, prg->regs + IPU_PRG_CTL);
|
|
|
|
val = IPU_PRG_REG_UPDATE_REG_UPDATE;
|
|
writel(val, prg->regs + IPU_PRG_REG_UPDATE);
|
|
|
|
clk_disable_unprepare(prg->clk_ipg);
|
|
|
|
chan->enabled = true;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ipu_prg_channel_configure);
|
|
|
|
static int ipu_prg_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct ipu_prg *prg;
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
prg = devm_kzalloc(dev, sizeof(*prg), GFP_KERNEL);
|
|
if (!prg)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
prg->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(prg->regs))
|
|
return PTR_ERR(prg->regs);
|
|
|
|
|
|
prg->clk_ipg = devm_clk_get(dev, "ipg");
|
|
if (IS_ERR(prg->clk_ipg))
|
|
return PTR_ERR(prg->clk_ipg);
|
|
|
|
prg->clk_axi = devm_clk_get(dev, "axi");
|
|
if (IS_ERR(prg->clk_axi))
|
|
return PTR_ERR(prg->clk_axi);
|
|
|
|
prg->iomuxc_gpr =
|
|
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (IS_ERR(prg->iomuxc_gpr))
|
|
return PTR_ERR(prg->iomuxc_gpr);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
prg->pres[i] = ipu_pre_lookup_by_phandle(dev, "fsl,pres", i);
|
|
if (!prg->pres[i])
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
ret = clk_prepare_enable(prg->clk_ipg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* init to free running mode */
|
|
val = readl(prg->regs + IPU_PRG_CTL);
|
|
val |= IPU_PRG_CTL_SHADOW_EN;
|
|
writel(val, prg->regs + IPU_PRG_CTL);
|
|
|
|
/* disable address threshold */
|
|
writel(0xffffffff, prg->regs + IPU_PRG_THD);
|
|
|
|
clk_disable_unprepare(prg->clk_ipg);
|
|
|
|
prg->dev = dev;
|
|
platform_set_drvdata(pdev, prg);
|
|
mutex_lock(&ipu_prg_list_mutex);
|
|
list_add(&prg->list, &ipu_prg_list);
|
|
mutex_unlock(&ipu_prg_list_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ipu_prg_remove(struct platform_device *pdev)
|
|
{
|
|
struct ipu_prg *prg = platform_get_drvdata(pdev);
|
|
|
|
mutex_lock(&ipu_prg_list_mutex);
|
|
list_del(&prg->list);
|
|
mutex_unlock(&ipu_prg_list_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ipu_prg_dt_ids[] = {
|
|
{ .compatible = "fsl,imx6qp-prg", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
struct platform_driver ipu_prg_drv = {
|
|
.probe = ipu_prg_probe,
|
|
.remove = ipu_prg_remove,
|
|
.driver = {
|
|
.name = "imx-ipu-prg",
|
|
.of_match_table = ipu_prg_dt_ids,
|
|
},
|
|
};
|