redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/thermal/samsung/exynos_tmu_data.c
Lukasz Majewski 4f11b85a5f thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) 
This patch provides auto disable/enable operation for boost. It uses already
present thermal infrastructure to provide BOOST hysteresis.
The TMU data is modified to work properly with or without BOOST.
Hence, the two first trip points with corresponding clip frequencies are
adjusted.

The first one is reduced from 85 to 70 degrees and the clip frequency is
increased to 1.4 GHz from 800 MHz. This trip point is in fact responsible
for providing BOOST hysteresis. When temperature exceeds 70 deg, the maximal
non BOOST frequency for Exynos4412 is imposed.

Since the first trigger level has been "stolen" for BOOST, the second one
needs to be a compromise for the previously used two for non BOOST
configuration. The 95 deg with modified clip freq (to 400 MHz) should provide
a good balance between cooling down the overheated device and throughput on
an acceptable level.

Two last trigger levels are not modified since, they cause platform shutdown
on emergency overheat to happen.

The third trip point passage results in SW managed shut down of the system.
If the last trip point is crossed, the PMU HW generates the power off
signal.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-17 02:00:45 +01:00

269 lines
8.9 KiB
C
Raw Blame History

/*
* exynos_tmu_data.c - Samsung EXYNOS tmu data file
*
* Copyright (C) 2013 Samsung Electronics
* Amit Daniel Kachhap <amit.daniel@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
#include "exynos_tmu_data.h"
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
.tmu_data = {
{
.threshold = 80,
.trigger_levels[0] = 5,
.trigger_levels[1] = 20,
.trigger_levels[2] = 30,
.trigger_enable[0] = true,
.trigger_enable[1] = true,
.trigger_enable[2] = true,
.trigger_enable[3] = false,
.trigger_type[0] = THROTTLE_ACTIVE,
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
.max_trigger_level = 4,
.gain = 15,
.reference_voltage = 7,
.cal_type = TYPE_ONE_POINT_TRIMMING,
.min_efuse_value = 40,
.max_efuse_value = 100,
.first_point_trim = 25,
.second_point_trim = 85,
.default_temp_offset = 50,
.freq_tab[0] = {
.freq_clip_max = 800 * 1000,
.temp_level = 85,
},
.freq_tab[1] = {
.freq_clip_max = 200 * 1000,
.temp_level = 100,
},
.freq_tab_count = 2,
.type = SOC_ARCH_EXYNOS4210,
.registers = &exynos4210_tmu_registers,
.features = TMU_SUPPORT_READY_STATUS,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
.inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
.inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
.inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
.threshold_falling = 10, \
.trigger_levels[0] = 70, \
.trigger_levels[1] = 95, \
.trigger_levels[2] = 110, \
.trigger_levels[3] = 120, \
.trigger_enable[0] = true, \
.trigger_enable[1] = true, \
.trigger_enable[2] = true, \
.trigger_enable[3] = false, \
.trigger_type[0] = THROTTLE_ACTIVE, \
.trigger_type[1] = THROTTLE_ACTIVE, \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
.efuse_value = 55, \
.min_efuse_value = 40, \
.max_efuse_value = 100, \
.first_point_trim = 25, \
.second_point_trim = 85, \
.default_temp_offset = 50, \
.freq_tab[0] = { \
.freq_clip_max = 1400 * 1000, \
.temp_level = 70, \
}, \
.freq_tab[1] = { \
.freq_clip_max = 400 * 1000, \
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
#if defined(CONFIG_SOC_EXYNOS4412)
struct exynos_tmu_init_data const exynos4412_default_tmu_data = {
.tmu_data = {
{
EXYNOS4412_TMU_DATA,
.type = SOC_ARCH_EXYNOS4412,
.test_mux = EXYNOS4412_MUX_ADDR_VALUE,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS5250)
struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
.tmu_data = {
{
EXYNOS4412_TMU_DATA,
.type = SOC_ARCH_EXYNOS5250,
},
},
.tmu_count = 1,
};
#endif
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
.calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
.calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
.threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.tmu_pmin = EXYNOS5440_TMU_PMIN,
};
#define EXYNOS5440_TMU_DATA \
.trigger_levels[0] = 100, \
.trigger_levels[4] = 105, \
.trigger_enable[0] = 1, \
.trigger_type[0] = SW_TRIP, \
.trigger_type[4] = HW_TRIP, \
.max_trigger_level = 5, \
.gain = 5, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
.cal_mode = 0, \
.efuse_value = 0x5b2d, \
.min_efuse_value = 16, \
.max_efuse_value = 76, \
.first_point_trim = 25, \
.second_point_trim = 70, \
.default_temp_offset = 25, \
.type = SOC_ARCH_EXYNOS5440, \
.registers = &exynos5440_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
.tmu_data = {
{ EXYNOS5440_TMU_DATA } ,
{ EXYNOS5440_TMU_DATA } ,
{ EXYNOS5440_TMU_DATA } ,
},
.tmu_count = 3,
};
#endif
View git blame Copy permalink