![Domen Puncer](/assets/img/avatar_default.png)
Low-power mode implementation for Lite5200b. Some I/O registers are also saved here. A recent U-Boot that supports this (lite5200b_PM_config) is needed. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
413 lines
7.6 KiB
ArmAsm
413 lines
7.6 KiB
ArmAsm
#include <asm/reg.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
|
|
|
|
#define SDRAM_CTRL 0x104
|
|
#define SC_MODE_EN (1<<31)
|
|
#define SC_CKE (1<<30)
|
|
#define SC_REF_EN (1<<28)
|
|
#define SC_SOFT_PRE (1<<1)
|
|
|
|
#define GPIOW_GPIOE 0xc00
|
|
#define GPIOW_DDR 0xc08
|
|
#define GPIOW_DVO 0xc0c
|
|
|
|
#define CDM_CE 0x214
|
|
#define CDM_SDRAM (1<<3)
|
|
|
|
|
|
/* helpers... beware: r10 and r4 are overwritten */
|
|
#define SAVE_SPRN(reg, addr) \
|
|
mfspr r10, SPRN_##reg; \
|
|
stw r10, ((addr)*4)(r4);
|
|
|
|
#define LOAD_SPRN(reg, addr) \
|
|
lwz r10, ((addr)*4)(r4); \
|
|
mtspr SPRN_##reg, r10; \
|
|
sync; \
|
|
isync;
|
|
|
|
|
|
.data
|
|
registers:
|
|
.space 0x5c*4
|
|
.text
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
/* low-power mode with help of M68HLC908QT1 */
|
|
|
|
.globl lite5200_low_power
|
|
lite5200_low_power:
|
|
|
|
mr r7, r3 /* save SRAM va */
|
|
mr r8, r4 /* save MBAR va */
|
|
|
|
/* setup wakeup address for u-boot at physical location 0x0 */
|
|
lis r3, CONFIG_KERNEL_START@h
|
|
lis r4, lite5200_wakeup@h
|
|
ori r4, r4, lite5200_wakeup@l
|
|
sub r4, r4, r3
|
|
stw r4, 0(r3)
|
|
|
|
|
|
/*
|
|
* save stuff BDI overwrites
|
|
* 0xf0 (0xe0->0x100 gets overwritten when BDI connected;
|
|
* even when CONFIG_BDI* is disabled and MMU XLAT commented; heisenbug?))
|
|
* WARNING: self-refresh doesn't seem to work when BDI2000 is connected,
|
|
* possibly because BDI sets SDRAM registers before wakeup code does
|
|
*/
|
|
lis r4, registers@h
|
|
ori r4, r4, registers@l
|
|
lwz r10, 0xf0(r3)
|
|
stw r10, (0x1d*4)(r4)
|
|
|
|
/* save registers to r4 [destroys r10] */
|
|
SAVE_SPRN(LR, 0x1c)
|
|
bl save_regs
|
|
|
|
/* flush caches [destroys r3, r4] */
|
|
bl flush_data_cache
|
|
|
|
|
|
/* copy code to sram */
|
|
mr r4, r7
|
|
li r3, (sram_code_end - sram_code)/4
|
|
mtctr r3
|
|
lis r3, sram_code@h
|
|
ori r3, r3, sram_code@l
|
|
1:
|
|
lwz r5, 0(r3)
|
|
stw r5, 0(r4)
|
|
addi r3, r3, 4
|
|
addi r4, r4, 4
|
|
bdnz 1b
|
|
|
|
/* get tb_ticks_per_usec */
|
|
lis r3, tb_ticks_per_usec@h
|
|
lwz r11, tb_ticks_per_usec@l(r3)
|
|
|
|
/* disable I and D caches */
|
|
mfspr r3, SPRN_HID0
|
|
ori r3, r3, HID0_ICE | HID0_DCE
|
|
xori r3, r3, HID0_ICE | HID0_DCE
|
|
sync; isync;
|
|
mtspr SPRN_HID0, r3
|
|
sync; isync;
|
|
|
|
/* jump to sram */
|
|
mtlr r7
|
|
blrl
|
|
/* doesn't return */
|
|
|
|
|
|
sram_code:
|
|
/* self refresh */
|
|
lwz r4, SDRAM_CTRL(r8)
|
|
|
|
/* send NOP (precharge) */
|
|
oris r4, r4, SC_MODE_EN@h /* mode_en */
|
|
stw r4, SDRAM_CTRL(r8)
|
|
sync
|
|
|
|
ori r4, r4, SC_SOFT_PRE /* soft_pre */
|
|
stw r4, SDRAM_CTRL(r8)
|
|
sync
|
|
xori r4, r4, SC_SOFT_PRE
|
|
|
|
xoris r4, r4, SC_MODE_EN@h /* !mode_en */
|
|
stw r4, SDRAM_CTRL(r8)
|
|
sync
|
|
|
|
/* delay (for NOP to finish) */
|
|
li r12, 1
|
|
bl udelay
|
|
|
|
/*
|
|
* mode_en must not be set when enabling self-refresh
|
|
* send AR with CKE low (self-refresh)
|
|
*/
|
|
oris r4, r4, (SC_REF_EN | SC_CKE)@h
|
|
xoris r4, r4, (SC_CKE)@h /* ref_en !cke */
|
|
stw r4, SDRAM_CTRL(r8)
|
|
sync
|
|
|
|
/* delay (after !CKE there should be two cycles) */
|
|
li r12, 1
|
|
bl udelay
|
|
|
|
/* disable clock */
|
|
lwz r4, CDM_CE(r8)
|
|
ori r4, r4, CDM_SDRAM
|
|
xori r4, r4, CDM_SDRAM
|
|
stw r4, CDM_CE(r8)
|
|
sync
|
|
|
|
/* delay a bit */
|
|
li r12, 1
|
|
bl udelay
|
|
|
|
|
|
/* turn off with QT chip */
|
|
li r4, 0x02
|
|
stb r4, GPIOW_GPIOE(r8) /* enable gpio_wkup1 */
|
|
sync
|
|
|
|
stb r4, GPIOW_DVO(r8) /* "output" high */
|
|
sync
|
|
stb r4, GPIOW_DDR(r8) /* output */
|
|
sync
|
|
stb r4, GPIOW_DVO(r8) /* output high */
|
|
sync
|
|
|
|
/* 10uS delay */
|
|
li r12, 10
|
|
bl udelay
|
|
|
|
/* turn off */
|
|
li r4, 0
|
|
stb r4, GPIOW_DVO(r8) /* output low */
|
|
sync
|
|
|
|
/* wait until we're offline */
|
|
1:
|
|
b 1b
|
|
|
|
|
|
/* local udelay in sram is needed */
|
|
udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
|
|
mullw r12, r12, r11
|
|
mftb r13 /* start */
|
|
addi r12, r13, r12 /* end */
|
|
1:
|
|
mftb r13 /* current */
|
|
cmp cr0, r13, r12
|
|
blt 1b
|
|
blr
|
|
|
|
sram_code_end:
|
|
|
|
|
|
|
|
/* uboot jumps here on resume */
|
|
lite5200_wakeup:
|
|
bl restore_regs
|
|
|
|
|
|
/* HIDs, MSR */
|
|
LOAD_SPRN(HID1, 0x19)
|
|
LOAD_SPRN(HID2, 0x1a)
|
|
|
|
|
|
/* address translation is tricky (see turn_on_mmu) */
|
|
mfmsr r10
|
|
ori r10, r10, MSR_DR | MSR_IR
|
|
|
|
|
|
mtspr SPRN_SRR1, r10
|
|
lis r10, mmu_on@h
|
|
ori r10, r10, mmu_on@l
|
|
mtspr SPRN_SRR0, r10
|
|
sync
|
|
rfi
|
|
mmu_on:
|
|
/* kernel offset (r4 is still set from restore_registers) */
|
|
addis r4, r4, CONFIG_KERNEL_START@h
|
|
|
|
|
|
/* restore MSR */
|
|
lwz r10, (4*0x1b)(r4)
|
|
mtmsr r10
|
|
sync; isync;
|
|
|
|
/* invalidate caches */
|
|
mfspr r10, SPRN_HID0
|
|
ori r5, r10, HID0_ICFI | HID0_DCI
|
|
mtspr SPRN_HID0, r5 /* invalidate caches */
|
|
sync; isync;
|
|
mtspr SPRN_HID0, r10
|
|
sync; isync;
|
|
|
|
/* enable caches */
|
|
lwz r10, (4*0x18)(r4)
|
|
mtspr SPRN_HID0, r10 /* restore (enable caches, DPM) */
|
|
/* ^ this has to be after address translation set in MSR */
|
|
sync
|
|
isync
|
|
|
|
|
|
/* restore 0xf0 (BDI2000) */
|
|
lis r3, CONFIG_KERNEL_START@h
|
|
lwz r10, (0x1d*4)(r4)
|
|
stw r10, 0xf0(r3)
|
|
|
|
LOAD_SPRN(LR, 0x1c)
|
|
|
|
|
|
blr
|
|
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
/* boring code: helpers */
|
|
|
|
/* save registers */
|
|
#define SAVE_BAT(n, addr) \
|
|
SAVE_SPRN(DBAT##n##L, addr); \
|
|
SAVE_SPRN(DBAT##n##U, addr+1); \
|
|
SAVE_SPRN(IBAT##n##L, addr+2); \
|
|
SAVE_SPRN(IBAT##n##U, addr+3);
|
|
|
|
#define SAVE_SR(n, addr) \
|
|
mfsr r10, n; \
|
|
stw r10, ((addr)*4)(r4);
|
|
|
|
#define SAVE_4SR(n, addr) \
|
|
SAVE_SR(n, addr); \
|
|
SAVE_SR(n+1, addr+1); \
|
|
SAVE_SR(n+2, addr+2); \
|
|
SAVE_SR(n+3, addr+3);
|
|
|
|
save_regs:
|
|
stw r0, 0(r4)
|
|
stw r1, 0x4(r4)
|
|
stw r2, 0x8(r4)
|
|
stmw r11, 0xc(r4) /* 0xc -> 0x5f, (0x18*4-1) */
|
|
|
|
SAVE_SPRN(HID0, 0x18)
|
|
SAVE_SPRN(HID1, 0x19)
|
|
SAVE_SPRN(HID2, 0x1a)
|
|
mfmsr r10
|
|
stw r10, (4*0x1b)(r4)
|
|
/*SAVE_SPRN(LR, 0x1c) have to save it before the call */
|
|
/* 0x1d reserved by 0xf0 */
|
|
SAVE_SPRN(RPA, 0x1e)
|
|
SAVE_SPRN(SDR1, 0x1f)
|
|
|
|
/* save MMU regs */
|
|
SAVE_BAT(0, 0x20)
|
|
SAVE_BAT(1, 0x24)
|
|
SAVE_BAT(2, 0x28)
|
|
SAVE_BAT(3, 0x2c)
|
|
SAVE_BAT(4, 0x30)
|
|
SAVE_BAT(5, 0x34)
|
|
SAVE_BAT(6, 0x38)
|
|
SAVE_BAT(7, 0x3c)
|
|
|
|
SAVE_4SR(0, 0x40)
|
|
SAVE_4SR(4, 0x44)
|
|
SAVE_4SR(8, 0x48)
|
|
SAVE_4SR(12, 0x4c)
|
|
|
|
SAVE_SPRN(SPRG0, 0x50)
|
|
SAVE_SPRN(SPRG1, 0x51)
|
|
SAVE_SPRN(SPRG2, 0x52)
|
|
SAVE_SPRN(SPRG3, 0x53)
|
|
SAVE_SPRN(SPRG4, 0x54)
|
|
SAVE_SPRN(SPRG5, 0x55)
|
|
SAVE_SPRN(SPRG6, 0x56)
|
|
SAVE_SPRN(SPRG7, 0x57)
|
|
|
|
SAVE_SPRN(IABR, 0x58)
|
|
SAVE_SPRN(DABR, 0x59)
|
|
SAVE_SPRN(TBRL, 0x5a)
|
|
SAVE_SPRN(TBRU, 0x5b)
|
|
|
|
blr
|
|
|
|
|
|
/* restore registers */
|
|
#define LOAD_BAT(n, addr) \
|
|
LOAD_SPRN(DBAT##n##L, addr); \
|
|
LOAD_SPRN(DBAT##n##U, addr+1); \
|
|
LOAD_SPRN(IBAT##n##L, addr+2); \
|
|
LOAD_SPRN(IBAT##n##U, addr+3);
|
|
|
|
#define LOAD_SR(n, addr) \
|
|
lwz r10, ((addr)*4)(r4); \
|
|
mtsr n, r10;
|
|
|
|
#define LOAD_4SR(n, addr) \
|
|
LOAD_SR(n, addr); \
|
|
LOAD_SR(n+1, addr+1); \
|
|
LOAD_SR(n+2, addr+2); \
|
|
LOAD_SR(n+3, addr+3);
|
|
|
|
restore_regs:
|
|
lis r4, registers@h
|
|
ori r4, r4, registers@l
|
|
|
|
/* MMU is not up yet */
|
|
subis r4, r4, CONFIG_KERNEL_START@h
|
|
|
|
lwz r0, 0(r4)
|
|
lwz r1, 0x4(r4)
|
|
lwz r2, 0x8(r4)
|
|
lmw r11, 0xc(r4)
|
|
|
|
/*
|
|
* these are a bit tricky
|
|
*
|
|
* 0x18 - HID0
|
|
* 0x19 - HID1
|
|
* 0x1a - HID2
|
|
* 0x1b - MSR
|
|
* 0x1c - LR
|
|
* 0x1d - reserved by 0xf0 (BDI2000)
|
|
*/
|
|
LOAD_SPRN(RPA, 0x1e);
|
|
LOAD_SPRN(SDR1, 0x1f);
|
|
|
|
/* restore MMU regs */
|
|
LOAD_BAT(0, 0x20)
|
|
LOAD_BAT(1, 0x24)
|
|
LOAD_BAT(2, 0x28)
|
|
LOAD_BAT(3, 0x2c)
|
|
LOAD_BAT(4, 0x30)
|
|
LOAD_BAT(5, 0x34)
|
|
LOAD_BAT(6, 0x38)
|
|
LOAD_BAT(7, 0x3c)
|
|
|
|
LOAD_4SR(0, 0x40)
|
|
LOAD_4SR(4, 0x44)
|
|
LOAD_4SR(8, 0x48)
|
|
LOAD_4SR(12, 0x4c)
|
|
|
|
/* rest of regs */
|
|
LOAD_SPRN(SPRG0, 0x50);
|
|
LOAD_SPRN(SPRG1, 0x51);
|
|
LOAD_SPRN(SPRG2, 0x52);
|
|
LOAD_SPRN(SPRG3, 0x53);
|
|
LOAD_SPRN(SPRG4, 0x54);
|
|
LOAD_SPRN(SPRG5, 0x55);
|
|
LOAD_SPRN(SPRG6, 0x56);
|
|
LOAD_SPRN(SPRG7, 0x57);
|
|
|
|
LOAD_SPRN(IABR, 0x58);
|
|
LOAD_SPRN(DABR, 0x59);
|
|
LOAD_SPRN(TBWL, 0x5a); /* these two have separate R/W regs */
|
|
LOAD_SPRN(TBWU, 0x5b);
|
|
|
|
blr
|
|
|
|
|
|
|
|
/* cache flushing code. copied from arch/ppc/boot/util.S */
|
|
#define NUM_CACHE_LINES (128*8)
|
|
|
|
/*
|
|
* Flush data cache
|
|
* Do this by just reading lots of stuff into the cache.
|
|
*/
|
|
flush_data_cache:
|
|
lis r3,CONFIG_KERNEL_START@h
|
|
ori r3,r3,CONFIG_KERNEL_START@l
|
|
li r4,NUM_CACHE_LINES
|
|
mtctr r4
|
|
1:
|
|
lwz r4,0(r3)
|
|
addi r3,r3,L1_CACHE_BYTES /* Next line, please */
|
|
bdnz 1b
|
|
blr
|