![Samuel Holland](/assets/img/avatar_default.png)
According to the BSP source code, both the AR100 and R_APB2 clocks have PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre- divider used for PLL_PERIPH0 should be changed to index 3 to match. This was verified by running a rough benchmark on the AR100 with various clock settings: | mux | pre-divider | iterations/second | clock source | |=====|=============|===================|==============| | 0 | 0 | 19033 (stable) | osc24M | | 2 | 5 | 11466 (unstable) | iosc/osc16M | | 2 | 17 | 11422 (unstable) | iosc/osc16M | | 3 | 5 | 85338 (stable) | pll-periph0 | | 3 | 17 | 27167 (stable) | pll-periph0 | The relative performance numbers all match up (with pll-periph0 running at its default 600MHz). Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
198 lines
5.6 KiB
C
198 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include "ccu_common.h"
|
|
#include "ccu_reset.h"
|
|
|
|
#include "ccu_div.h"
|
|
#include "ccu_gate.h"
|
|
#include "ccu_mp.h"
|
|
#include "ccu_nm.h"
|
|
|
|
#include "ccu-sun50i-h6-r.h"
|
|
|
|
/*
|
|
* Information about AR100 and AHB/APB clocks in R_CCU are gathered from
|
|
* clock definitions in the BSP source code.
|
|
*/
|
|
|
|
static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k",
|
|
"iosc", "pll-periph0" };
|
|
static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = {
|
|
{ .index = 3, .shift = 0, .width = 5 },
|
|
};
|
|
|
|
static struct ccu_div ar100_clk = {
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
|
|
.mux = {
|
|
.shift = 24,
|
|
.width = 2,
|
|
|
|
.var_predivs = ar100_r_apb2_predivs,
|
|
.n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs),
|
|
},
|
|
|
|
.common = {
|
|
.reg = 0x000,
|
|
.features = CCU_FEATURE_VARIABLE_PREDIV,
|
|
.hw.init = CLK_HW_INIT_PARENTS("ar100",
|
|
ar100_r_apb2_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &ar100_clk.common.hw, 1, 1, 0);
|
|
|
|
static SUNXI_CCU_M(r_apb1_clk, "r-apb1", "r-ahb", 0x00c, 0, 2, 0);
|
|
|
|
static struct ccu_div r_apb2_clk = {
|
|
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
|
|
|
|
.mux = {
|
|
.shift = 24,
|
|
.width = 2,
|
|
|
|
.var_predivs = ar100_r_apb2_predivs,
|
|
.n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs),
|
|
},
|
|
|
|
.common = {
|
|
.reg = 0x010,
|
|
.features = CCU_FEATURE_VARIABLE_PREDIV,
|
|
.hw.init = CLK_HW_INIT_PARENTS("r-apb2",
|
|
ar100_r_apb2_parents,
|
|
&ccu_div_ops,
|
|
0),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Information about the gate/resets are gathered from the clock header file
|
|
* in the BSP source code, although most of them are unused. The existence
|
|
* of the hardware block is verified with "3.1 Memory Mapping" chapter in
|
|
* "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified
|
|
* with "3.3.2.1 System Bus Tree" chapter inthe same document.
|
|
*/
|
|
static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1",
|
|
0x11c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1",
|
|
0x12c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1",
|
|
0x13c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2",
|
|
0x18c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2",
|
|
0x19c, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1",
|
|
0x1cc, BIT(0), 0);
|
|
static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1",
|
|
0x1ec, BIT(0), 0);
|
|
|
|
/* Information of IR(RX) mod clock is gathered from BSP source code */
|
|
static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
|
|
r_mod0_default_parents, 0x1c0,
|
|
0, 5, /* M */
|
|
8, 2, /* P */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
/*
|
|
* BSP didn't use the 1-wire function at all now, and the information about
|
|
* this mod clock is guessed from the IR mod clock above. The existence of
|
|
* this mod clock is proven by BSP clock header, and the dividers are verified
|
|
* by contents in the 1-wire related chapter of the User Manual.
|
|
*/
|
|
|
|
static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1",
|
|
r_mod0_default_parents, 0x1e0,
|
|
0, 5, /* M */
|
|
8, 2, /* P */
|
|
24, 1, /* mux */
|
|
BIT(31), /* gate */
|
|
0);
|
|
|
|
static struct ccu_common *sun50i_h6_r_ccu_clks[] = {
|
|
&ar100_clk.common,
|
|
&r_apb1_clk.common,
|
|
&r_apb2_clk.common,
|
|
&r_apb1_timer_clk.common,
|
|
&r_apb1_twd_clk.common,
|
|
&r_apb1_pwm_clk.common,
|
|
&r_apb2_uart_clk.common,
|
|
&r_apb2_i2c_clk.common,
|
|
&r_apb1_ir_clk.common,
|
|
&r_apb1_w1_clk.common,
|
|
&ir_clk.common,
|
|
&w1_clk.common,
|
|
};
|
|
|
|
static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
|
|
.hws = {
|
|
[CLK_AR100] = &ar100_clk.common.hw,
|
|
[CLK_R_AHB] = &r_ahb_clk.hw,
|
|
[CLK_R_APB1] = &r_apb1_clk.common.hw,
|
|
[CLK_R_APB2] = &r_apb2_clk.common.hw,
|
|
[CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw,
|
|
[CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw,
|
|
[CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw,
|
|
[CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw,
|
|
[CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw,
|
|
[CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw,
|
|
[CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw,
|
|
[CLK_IR] = &ir_clk.common.hw,
|
|
[CLK_W1] = &w1_clk.common.hw,
|
|
},
|
|
.num = CLK_NUMBER,
|
|
};
|
|
|
|
static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = {
|
|
[RST_R_APB1_TIMER] = { 0x11c, BIT(16) },
|
|
[RST_R_APB1_TWD] = { 0x12c, BIT(16) },
|
|
[RST_R_APB1_PWM] = { 0x13c, BIT(16) },
|
|
[RST_R_APB2_UART] = { 0x18c, BIT(16) },
|
|
[RST_R_APB2_I2C] = { 0x19c, BIT(16) },
|
|
[RST_R_APB1_IR] = { 0x1cc, BIT(16) },
|
|
[RST_R_APB1_W1] = { 0x1ec, BIT(16) },
|
|
};
|
|
|
|
static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = {
|
|
.ccu_clks = sun50i_h6_r_ccu_clks,
|
|
.num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks),
|
|
|
|
.hw_clks = &sun50i_h6_r_hw_clks,
|
|
|
|
.resets = sun50i_h6_r_ccu_resets,
|
|
.num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets),
|
|
};
|
|
|
|
static void __init sunxi_r_ccu_init(struct device_node *node,
|
|
const struct sunxi_ccu_desc *desc)
|
|
{
|
|
void __iomem *reg;
|
|
|
|
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
|
|
if (IS_ERR(reg)) {
|
|
pr_err("%pOF: Could not map the clock registers\n", node);
|
|
return;
|
|
}
|
|
|
|
sunxi_ccu_probe(node, reg, desc);
|
|
}
|
|
|
|
static void __init sun50i_h6_r_ccu_setup(struct device_node *node)
|
|
{
|
|
sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc);
|
|
}
|
|
CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu",
|
|
sun50i_h6_r_ccu_setup);
|