alistair23-linux/drivers/gpu/drm/exynos/exynos_drm_drv.h
Inki Dae 832316c704 drm/exynos: use drm generic mmap interface
This patch removes DRM_EXYNOS_GEM_MMAP ictrl feature specific
to Exynos drm and instead uses drm generic mmap.

We had used the interface specific to Exynos drm to do mmap directly,
not to use demand paging which maps each page with physical memory
at page fault handler. We don't need the specific mmap interface
because the drm generic mmap which uses vm offset manager stuff can
also do mmap directly.

This patch makes a userspace region to be mapped with whole physical
memory region allocated by userspace request when mmap system call is
requested.

Changelog v2:
- do not set VM_IO, VM_DONTEXPEND and VM_DONTDUMP. These flags were already
  set by drm_gem_mmap
- do not include <linux/anon_inodes.h>, which isn't needed anymore.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-09-20 01:00:13 +09:00

379 lines
12 KiB
C

/* exynos_drm_drv.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* Authors:
* Inki Dae <inki.dae@samsung.com>
* Joonyoung Shim <jy0922.shim@samsung.com>
* Seung-Woo Kim <sw0312.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _EXYNOS_DRM_DRV_H_
#define _EXYNOS_DRM_DRV_H_
#include <linux/module.h>
#define MAX_CRTC 3
#define MAX_PLANE 5
#define MAX_FB_BUFFER 4
#define DEFAULT_ZPOS -1
#define _wait_for(COND, MS) ({ \
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
int ret__ = 0; \
while (!(COND)) { \
if (time_after(jiffies, timeout__)) { \
ret__ = -ETIMEDOUT; \
break; \
} \
} \
ret__; \
})
#define wait_for(COND, MS) _wait_for(COND, MS)
struct drm_device;
struct exynos_drm_overlay;
struct drm_connector;
/* This enumerates device type. */
enum exynos_drm_device_type {
EXYNOS_DEVICE_TYPE_NONE,
EXYNOS_DEVICE_TYPE_CRTC,
EXYNOS_DEVICE_TYPE_CONNECTOR,
};
/* this enumerates display type. */
enum exynos_drm_output_type {
EXYNOS_DISPLAY_TYPE_NONE,
/* RGB or CPU Interface. */
EXYNOS_DISPLAY_TYPE_LCD,
/* HDMI Interface. */
EXYNOS_DISPLAY_TYPE_HDMI,
/* Virtual Display Interface. */
EXYNOS_DISPLAY_TYPE_VIDI,
};
/*
* Exynos drm common overlay structure.
*
* @fb_x: offset x on a framebuffer to be displayed.
* - the unit is screen coordinates.
* @fb_y: offset y on a framebuffer to be displayed.
* - the unit is screen coordinates.
* @fb_width: width of a framebuffer.
* @fb_height: height of a framebuffer.
* @src_width: width of a partial image to be displayed from framebuffer.
* @src_height: height of a partial image to be displayed from framebuffer.
* @crtc_x: offset x on hardware screen.
* @crtc_y: offset y on hardware screen.
* @crtc_width: window width to be displayed (hardware screen).
* @crtc_height: window height to be displayed (hardware screen).
* @mode_width: width of screen mode.
* @mode_height: height of screen mode.
* @refresh: refresh rate.
* @scan_flag: interlace or progressive way.
* (it could be DRM_MODE_FLAG_*)
* @bpp: pixel size.(in bit)
* @pixel_format: fourcc pixel format of this overlay
* @dma_addr: array of bus(accessed by dma) address to the memory region
* allocated for a overlay.
* @zpos: order of overlay layer(z position).
* @default_win: a window to be enabled.
* @color_key: color key on or off.
* @index_color: if using color key feature then this value would be used
* as index color.
* @local_path: in case of lcd type, local path mode on or off.
* @transparency: transparency on or off.
* @activated: activated or not.
*
* this structure is common to exynos SoC and its contents would be copied
* to hardware specific overlay info.
*/
struct exynos_drm_overlay {
unsigned int fb_x;
unsigned int fb_y;
unsigned int fb_width;
unsigned int fb_height;
unsigned int src_width;
unsigned int src_height;
unsigned int crtc_x;
unsigned int crtc_y;
unsigned int crtc_width;
unsigned int crtc_height;
unsigned int mode_width;
unsigned int mode_height;
unsigned int refresh;
unsigned int scan_flag;
unsigned int bpp;
unsigned int pitch;
uint32_t pixel_format;
dma_addr_t dma_addr[MAX_FB_BUFFER];
int zpos;
bool default_win;
bool color_key;
unsigned int index_color;
bool local_path;
bool transparency;
bool activated;
};
/*
* Exynos DRM Display Structure.
* - this structure is common to analog tv, digital tv and lcd panel.
*
* @remove: cleans up the display for removal
* @mode_fixup: fix mode data comparing to hw specific display mode.
* @mode_set: convert drm_display_mode to hw specific display mode and
* would be called by encoder->mode_set().
* @check_mode: check if mode is valid or not.
* @dpms: display device on or off.
* @commit: apply changes to hw
*/
struct exynos_drm_display;
struct exynos_drm_display_ops {
int (*create_connector)(struct exynos_drm_display *display,
struct drm_encoder *encoder);
void (*remove)(struct exynos_drm_display *display);
void (*mode_fixup)(struct exynos_drm_display *display,
struct drm_connector *connector,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*mode_set)(struct exynos_drm_display *display,
struct drm_display_mode *mode);
int (*check_mode)(struct exynos_drm_display *display,
struct drm_display_mode *mode);
void (*dpms)(struct exynos_drm_display *display, int mode);
void (*commit)(struct exynos_drm_display *display);
};
/*
* Exynos drm display structure, maps 1:1 with an encoder/connector
*
* @list: the list entry for this manager
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @encoder: encoder object this display maps to
* @connector: connector object this display maps to
* @ops: pointer to callbacks for exynos drm specific functionality
* @ctx: A pointer to the display's implementation specific context
*/
struct exynos_drm_display {
struct list_head list;
enum exynos_drm_output_type type;
struct drm_encoder *encoder;
struct drm_connector *connector;
struct exynos_drm_display_ops *ops;
void *ctx;
};
/*
* Exynos drm manager ops
*
* @dpms: control device power.
* @mode_fixup: fix mode data before applying it
* @mode_set: set the given mode to the manager
* @commit: set current hw specific display mode to hw.
* @enable_vblank: specific driver callback for enabling vblank interrupt.
* @disable_vblank: specific driver callback for disabling vblank interrupt.
* @wait_for_vblank: wait for vblank interrupt to make sure that
* hardware overlay is updated.
* @win_mode_set: copy drm overlay info to hw specific overlay info.
* @win_commit: apply hardware specific overlay data to registers.
* @win_enable: enable hardware specific overlay.
* @win_disable: disable hardware specific overlay.
* @te_handler: trigger to transfer video image at the tearing effect
* synchronization signal if there is a page flip request.
*/
struct exynos_drm_manager;
struct exynos_drm_manager_ops {
void (*dpms)(struct exynos_drm_manager *mgr, int mode);
bool (*mode_fixup)(struct exynos_drm_manager *mgr,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*mode_set)(struct exynos_drm_manager *mgr,
const struct drm_display_mode *mode);
void (*commit)(struct exynos_drm_manager *mgr);
int (*enable_vblank)(struct exynos_drm_manager *mgr);
void (*disable_vblank)(struct exynos_drm_manager *mgr);
void (*wait_for_vblank)(struct exynos_drm_manager *mgr);
void (*win_mode_set)(struct exynos_drm_manager *mgr,
struct exynos_drm_overlay *overlay);
void (*win_commit)(struct exynos_drm_manager *mgr, int zpos);
void (*win_enable)(struct exynos_drm_manager *mgr, int zpos);
void (*win_disable)(struct exynos_drm_manager *mgr, int zpos);
void (*te_handler)(struct exynos_drm_manager *mgr);
};
/*
* Exynos drm common manager structure, maps 1:1 with a crtc
*
* @list: the list entry for this manager
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @drm_dev: pointer to the drm device
* @crtc: crtc object.
* @pipe: the pipe number for this crtc/manager
* @ops: pointer to callbacks for exynos drm specific functionality
* @ctx: A pointer to the manager's implementation specific context
*/
struct exynos_drm_manager {
struct list_head list;
enum exynos_drm_output_type type;
struct drm_device *drm_dev;
struct drm_crtc *crtc;
int pipe;
struct exynos_drm_manager_ops *ops;
void *ctx;
};
struct exynos_drm_g2d_private {
struct device *dev;
struct list_head inuse_cmdlist;
struct list_head event_list;
struct list_head userptr_list;
};
struct drm_exynos_file_private {
struct exynos_drm_g2d_private *g2d_priv;
struct device *ipp_dev;
};
/*
* Exynos drm private structure.
*
* @da_start: start address to device address space.
* with iommu, device address space starts from this address
* otherwise default one.
* @da_space_size: size of device address space.
* if 0 then default value is used for it.
* @pipe: the pipe number for this crtc/manager.
*/
struct exynos_drm_private {
struct drm_fb_helper *fb_helper;
/* list head for new event to be added. */
struct list_head pageflip_event_list;
/*
* created crtc object would be contained at this array and
* this array is used to be aware of which crtc did it request vblank.
*/
struct drm_crtc *crtc[MAX_CRTC];
struct drm_property *plane_zpos_property;
struct drm_property *crtc_mode_property;
unsigned long da_start;
unsigned long da_space_size;
unsigned int pipe;
};
/*
* Exynos drm sub driver structure.
*
* @list: sub driver has its own list object to register to exynos drm driver.
* @dev: pointer to device object for subdrv device driver.
* @drm_dev: pointer to drm_device and this pointer would be set
* when sub driver calls exynos_drm_subdrv_register().
* @manager: subdrv has its own manager to control a hardware appropriately
* and we can access a hardware drawing on this manager.
* @probe: this callback would be called by exynos drm driver after
* subdrv is registered to it.
* @remove: this callback is used to release resources created
* by probe callback.
* @open: this would be called with drm device file open.
* @close: this would be called with drm device file close.
*/
struct exynos_drm_subdrv {
struct list_head list;
struct device *dev;
struct drm_device *drm_dev;
int (*probe)(struct drm_device *drm_dev, struct device *dev);
void (*remove)(struct drm_device *drm_dev, struct device *dev);
int (*open)(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file);
void (*close)(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file);
};
/* This function would be called by non kms drivers such as g2d and ipp. */
int exynos_drm_subdrv_register(struct exynos_drm_subdrv *drm_subdrv);
/* this function removes subdrv list from exynos drm driver */
int exynos_drm_subdrv_unregister(struct exynos_drm_subdrv *drm_subdrv);
int exynos_drm_device_subdrv_probe(struct drm_device *dev);
int exynos_drm_device_subdrv_remove(struct drm_device *dev);
int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file);
void exynos_drm_subdrv_close(struct drm_device *dev, struct drm_file *file);
/*
* this function registers exynos drm hdmi platform device. It ensures only one
* instance of the device is created.
*/
int exynos_platform_device_hdmi_register(void);
/*
* this function unregisters exynos drm hdmi platform device if it exists.
*/
void exynos_platform_device_hdmi_unregister(void);
/*
* this function registers exynos drm ipp platform device.
*/
int exynos_platform_device_ipp_register(void);
/*
* this function unregisters exynos drm ipp platform device if it exists.
*/
void exynos_platform_device_ipp_unregister(void);
#ifdef CONFIG_DRM_EXYNOS_DPI
struct exynos_drm_display * exynos_dpi_probe(struct device *dev);
int exynos_dpi_remove(struct device *dev);
#else
static inline struct exynos_drm_display *
exynos_dpi_probe(struct device *dev) { return NULL; }
static inline int exynos_dpi_remove(struct device *dev) { return 0; }
#endif
/*
* this function registers exynos drm vidi platform device/driver.
*/
int exynos_drm_probe_vidi(void);
/*
* this function unregister exynos drm vidi platform device/driver.
*/
void exynos_drm_remove_vidi(void);
/* This function creates a encoder and a connector, and initializes them. */
int exynos_drm_create_enc_conn(struct drm_device *dev,
struct exynos_drm_display *display);
int exynos_drm_component_add(struct device *dev,
enum exynos_drm_device_type dev_type,
enum exynos_drm_output_type out_type);
void exynos_drm_component_del(struct device *dev,
enum exynos_drm_device_type dev_type);
extern struct platform_driver fimd_driver;
extern struct platform_driver dp_driver;
extern struct platform_driver dsi_driver;
extern struct platform_driver mixer_driver;
extern struct platform_driver hdmi_driver;
extern struct platform_driver exynos_drm_common_hdmi_driver;
extern struct platform_driver vidi_driver;
extern struct platform_driver g2d_driver;
extern struct platform_driver fimc_driver;
extern struct platform_driver rotator_driver;
extern struct platform_driver gsc_driver;
extern struct platform_driver ipp_driver;
#endif