![David Daney](/assets/img/avatar_default.png)
The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui ports present on the Cavium OCTEON family of SOCs. These SOCs are multi-core mips64 processors with existing support over in arch/mips. The driver files can be categorized into three basic groups: 1) Register definitions, these are named cvmx-*-defs.h 2) Main driver code, these have names that don't start cvmx-. 3) Interface specific functions and other utility code, names starting with cvmx- Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
1059 lines
32 KiB
C
1059 lines
32 KiB
C
/***********************license start***************
|
|
* Author: Cavium Networks
|
|
*
|
|
* Contact: support@caviumnetworks.com
|
|
* This file is part of the OCTEON SDK
|
|
*
|
|
* Copyright (c) 2003-2008 Cavium Networks
|
|
*
|
|
* This file is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License, Version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This file is distributed in the hope that it will be useful, but
|
|
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
|
|
* NONINFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this file; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
* or visit http://www.gnu.org/licenses/.
|
|
*
|
|
* This file may also be available under a different license from Cavium.
|
|
* Contact Cavium Networks for more information
|
|
***********************license end**************************************/
|
|
|
|
/*
|
|
*
|
|
* Helper functions for common, but complicated tasks.
|
|
*
|
|
*/
|
|
#include <asm/octeon/octeon.h>
|
|
|
|
#include "cvmx-config.h"
|
|
|
|
#include "cvmx-fpa.h"
|
|
#include "cvmx-pip.h"
|
|
#include "cvmx-pko.h"
|
|
#include "cvmx-ipd.h"
|
|
#include "cvmx-spi.h"
|
|
#include "cvmx-helper.h"
|
|
#include "cvmx-helper-board.h"
|
|
|
|
#include "cvmx-pip-defs.h"
|
|
#include "cvmx-smix-defs.h"
|
|
#include "cvmx-asxx-defs.h"
|
|
|
|
/**
|
|
* cvmx_override_pko_queue_priority(int ipd_port, uint64_t
|
|
* priorities[16]) is a function pointer. It is meant to allow
|
|
* customization of the PKO queue priorities based on the port
|
|
* number. Users should set this pointer to a function before
|
|
* calling any cvmx-helper operations.
|
|
*/
|
|
void (*cvmx_override_pko_queue_priority) (int pko_port,
|
|
uint64_t priorities[16]);
|
|
|
|
/**
|
|
* cvmx_override_ipd_port_setup(int ipd_port) is a function
|
|
* pointer. It is meant to allow customization of the IPD port
|
|
* setup before packet input/output comes online. It is called
|
|
* after cvmx-helper does the default IPD configuration, but
|
|
* before IPD is enabled. Users should set this pointer to a
|
|
* function before calling any cvmx-helper operations.
|
|
*/
|
|
void (*cvmx_override_ipd_port_setup) (int ipd_port);
|
|
|
|
/* Port count per interface */
|
|
static int interface_port_count[4] = { 0, 0, 0, 0 };
|
|
|
|
/* Port last configured link info index by IPD/PKO port */
|
|
static cvmx_helper_link_info_t
|
|
port_link_info[CVMX_PIP_NUM_INPUT_PORTS];
|
|
|
|
/**
|
|
* Return the number of interfaces the chip has. Each interface
|
|
* may have multiple ports. Most chips support two interfaces,
|
|
* but the CNX0XX and CNX1XX are exceptions. These only support
|
|
* one interface.
|
|
*
|
|
* Returns Number of interfaces on chip
|
|
*/
|
|
int cvmx_helper_get_number_of_interfaces(void)
|
|
{
|
|
if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
return 4;
|
|
else
|
|
return 3;
|
|
}
|
|
|
|
/**
|
|
* Return the number of ports on an interface. Depending on the
|
|
* chip and configuration, this can be 1-16. A value of 0
|
|
* specifies that the interface doesn't exist or isn't usable.
|
|
*
|
|
* @interface: Interface to get the port count for
|
|
*
|
|
* Returns Number of ports on interface. Can be Zero.
|
|
*/
|
|
int cvmx_helper_ports_on_interface(int interface)
|
|
{
|
|
return interface_port_count[interface];
|
|
}
|
|
|
|
/**
|
|
* Get the operating mode of an interface. Depending on the Octeon
|
|
* chip and configuration, this function returns an enumeration
|
|
* of the type of packet I/O supported by an interface.
|
|
*
|
|
* @interface: Interface to probe
|
|
*
|
|
* Returns Mode of the interface. Unknown or unsupported interfaces return
|
|
* DISABLED.
|
|
*/
|
|
cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
|
|
{
|
|
union cvmx_gmxx_inf_mode mode;
|
|
if (interface == 2)
|
|
return CVMX_HELPER_INTERFACE_MODE_NPI;
|
|
|
|
if (interface == 3) {
|
|
if (OCTEON_IS_MODEL(OCTEON_CN56XX)
|
|
|| OCTEON_IS_MODEL(OCTEON_CN52XX))
|
|
return CVMX_HELPER_INTERFACE_MODE_LOOP;
|
|
else
|
|
return CVMX_HELPER_INTERFACE_MODE_DISABLED;
|
|
}
|
|
|
|
if (interface == 0
|
|
&& cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5
|
|
&& cvmx_sysinfo_get()->board_rev_major == 1) {
|
|
/*
|
|
* Lie about interface type of CN3005 board. This
|
|
* board has a switch on port 1 like the other
|
|
* evaluation boards, but it is connected over RGMII
|
|
* instead of GMII. Report GMII mode so that the
|
|
* speed is forced to 1 Gbit full duplex. Other than
|
|
* some initial configuration (which does not use the
|
|
* output of this function) there is no difference in
|
|
* setup between GMII and RGMII modes.
|
|
*/
|
|
return CVMX_HELPER_INTERFACE_MODE_GMII;
|
|
}
|
|
|
|
/* Interface 1 is always disabled on CN31XX and CN30XX */
|
|
if ((interface == 1)
|
|
&& (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN30XX)
|
|
|| OCTEON_IS_MODEL(OCTEON_CN50XX)
|
|
|| OCTEON_IS_MODEL(OCTEON_CN52XX)))
|
|
return CVMX_HELPER_INTERFACE_MODE_DISABLED;
|
|
|
|
mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
|
|
|
|
if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
|
|
switch (mode.cn56xx.mode) {
|
|
case 0:
|
|
return CVMX_HELPER_INTERFACE_MODE_DISABLED;
|
|
case 1:
|
|
return CVMX_HELPER_INTERFACE_MODE_XAUI;
|
|
case 2:
|
|
return CVMX_HELPER_INTERFACE_MODE_SGMII;
|
|
case 3:
|
|
return CVMX_HELPER_INTERFACE_MODE_PICMG;
|
|
default:
|
|
return CVMX_HELPER_INTERFACE_MODE_DISABLED;
|
|
}
|
|
} else {
|
|
if (!mode.s.en)
|
|
return CVMX_HELPER_INTERFACE_MODE_DISABLED;
|
|
|
|
if (mode.s.type) {
|
|
if (OCTEON_IS_MODEL(OCTEON_CN38XX)
|
|
|| OCTEON_IS_MODEL(OCTEON_CN58XX))
|
|
return CVMX_HELPER_INTERFACE_MODE_SPI;
|
|
else
|
|
return CVMX_HELPER_INTERFACE_MODE_GMII;
|
|
} else
|
|
return CVMX_HELPER_INTERFACE_MODE_RGMII;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Configure the IPD/PIP tagging and QoS options for a specific
|
|
* port. This function determines the POW work queue entry
|
|
* contents for a port. The setup performed here is controlled by
|
|
* the defines in executive-config.h.
|
|
*
|
|
* @ipd_port: Port to configure. This follows the IPD numbering, not the
|
|
* per interface numbering
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
static int __cvmx_helper_port_setup_ipd(int ipd_port)
|
|
{
|
|
union cvmx_pip_prt_cfgx port_config;
|
|
union cvmx_pip_prt_tagx tag_config;
|
|
|
|
port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
|
|
tag_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_TAGX(ipd_port));
|
|
|
|
/* Have each port go to a different POW queue */
|
|
port_config.s.qos = ipd_port & 0x7;
|
|
|
|
/* Process the headers and place the IP header in the work queue */
|
|
port_config.s.mode = CVMX_HELPER_INPUT_PORT_SKIP_MODE;
|
|
|
|
tag_config.s.ip6_src_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP;
|
|
tag_config.s.ip6_dst_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_IP;
|
|
tag_config.s.ip6_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT;
|
|
tag_config.s.ip6_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT;
|
|
tag_config.s.ip6_nxth_flag = CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER;
|
|
tag_config.s.ip4_src_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP;
|
|
tag_config.s.ip4_dst_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_IP;
|
|
tag_config.s.ip4_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT;
|
|
tag_config.s.ip4_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT;
|
|
tag_config.s.ip4_pctl_flag = CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL;
|
|
tag_config.s.inc_prt_flag = CVMX_HELPER_INPUT_TAG_INPUT_PORT;
|
|
tag_config.s.tcp6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
|
|
tag_config.s.tcp4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
|
|
tag_config.s.ip6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
|
|
tag_config.s.ip4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
|
|
tag_config.s.non_tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
|
|
/* Put all packets in group 0. Other groups can be used by the app */
|
|
tag_config.s.grp = 0;
|
|
|
|
cvmx_pip_config_port(ipd_port, port_config, tag_config);
|
|
|
|
/* Give the user a chance to override our setting for each port */
|
|
if (cvmx_override_ipd_port_setup)
|
|
cvmx_override_ipd_port_setup(ipd_port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* This function probes an interface to determine the actual
|
|
* number of hardware ports connected to it. It doesn't setup the
|
|
* ports or enable them. The main goal here is to set the global
|
|
* interface_port_count[interface] correctly. Hardware setup of the
|
|
* ports will be performed later.
|
|
*
|
|
* @interface: Interface to probe
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
int cvmx_helper_interface_probe(int interface)
|
|
{
|
|
/* At this stage in the game we don't want packets to be moving yet.
|
|
The following probe calls should perform hardware setup
|
|
needed to determine port counts. Receive must still be disabled */
|
|
switch (cvmx_helper_interface_get_mode(interface)) {
|
|
/* These types don't support ports to IPD/PKO */
|
|
case CVMX_HELPER_INTERFACE_MODE_DISABLED:
|
|
case CVMX_HELPER_INTERFACE_MODE_PCIE:
|
|
interface_port_count[interface] = 0;
|
|
break;
|
|
/* XAUI is a single high speed port */
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_xaui_probe(interface);
|
|
break;
|
|
/*
|
|
* RGMII/GMII/MII are all treated about the same. Most
|
|
* functions refer to these ports as RGMII.
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_rgmii_probe(interface);
|
|
break;
|
|
/*
|
|
* SPI4 can have 1-16 ports depending on the device at
|
|
* the other end.
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_SPI:
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_spi_probe(interface);
|
|
break;
|
|
/*
|
|
* SGMII can have 1-4 ports depending on how many are
|
|
* hooked up.
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_PICMG:
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_sgmii_probe(interface);
|
|
break;
|
|
/* PCI target Network Packet Interface */
|
|
case CVMX_HELPER_INTERFACE_MODE_NPI:
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_npi_probe(interface);
|
|
break;
|
|
/*
|
|
* Special loopback only ports. These are not the same
|
|
* as other ports in loopback mode.
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_LOOP:
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_loop_probe(interface);
|
|
break;
|
|
}
|
|
|
|
interface_port_count[interface] =
|
|
__cvmx_helper_board_interface_probe(interface,
|
|
interface_port_count
|
|
[interface]);
|
|
|
|
/* Make sure all global variables propagate to other cores */
|
|
CVMX_SYNCWS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Setup the IPD/PIP for the ports on an interface. Packet
|
|
* classification and tagging are set for every port on the
|
|
* interface. The number of ports on the interface must already
|
|
* have been probed.
|
|
*
|
|
* @interface: Interface to setup IPD/PIP for
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
static int __cvmx_helper_interface_setup_ipd(int interface)
|
|
{
|
|
int ipd_port = cvmx_helper_get_ipd_port(interface, 0);
|
|
int num_ports = interface_port_count[interface];
|
|
|
|
while (num_ports--) {
|
|
__cvmx_helper_port_setup_ipd(ipd_port);
|
|
ipd_port++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Setup global setting for IPD/PIP not related to a specific
|
|
* interface or port. This must be called before IPD is enabled.
|
|
*
|
|
* Returns Zero on success, negative on failure.
|
|
*/
|
|
static int __cvmx_helper_global_setup_ipd(void)
|
|
{
|
|
/* Setup the global packet input options */
|
|
cvmx_ipd_config(CVMX_FPA_PACKET_POOL_SIZE / 8,
|
|
CVMX_HELPER_FIRST_MBUFF_SKIP / 8,
|
|
CVMX_HELPER_NOT_FIRST_MBUFF_SKIP / 8,
|
|
/* The +8 is to account for the next ptr */
|
|
(CVMX_HELPER_FIRST_MBUFF_SKIP + 8) / 128,
|
|
/* The +8 is to account for the next ptr */
|
|
(CVMX_HELPER_NOT_FIRST_MBUFF_SKIP + 8) / 128,
|
|
CVMX_FPA_WQE_POOL,
|
|
CVMX_IPD_OPC_MODE_STT,
|
|
CVMX_HELPER_ENABLE_BACK_PRESSURE);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Setup the PKO for the ports on an interface. The number of
|
|
* queues per port and the priority of each PKO output queue
|
|
* is set here. PKO must be disabled when this function is called.
|
|
*
|
|
* @interface: Interface to setup PKO for
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
static int __cvmx_helper_interface_setup_pko(int interface)
|
|
{
|
|
/*
|
|
* Each packet output queue has an associated priority. The
|
|
* higher the priority, the more often it can send a packet. A
|
|
* priority of 8 means it can send in all 8 rounds of
|
|
* contention. We're going to make each queue one less than
|
|
* the last. The vector of priorities has been extended to
|
|
* support CN5xxx CPUs, where up to 16 queues can be
|
|
* associated to a port. To keep backward compatibility we
|
|
* don't change the initial 8 priorities and replicate them in
|
|
* the second half. With per-core PKO queues (PKO lockless
|
|
* operation) all queues have the same priority.
|
|
*/
|
|
uint64_t priorities[16] =
|
|
{ 8, 7, 6, 5, 4, 3, 2, 1, 8, 7, 6, 5, 4, 3, 2, 1 };
|
|
|
|
/*
|
|
* Setup the IPD/PIP and PKO for the ports discovered
|
|
* above. Here packet classification, tagging and output
|
|
* priorities are set.
|
|
*/
|
|
int ipd_port = cvmx_helper_get_ipd_port(interface, 0);
|
|
int num_ports = interface_port_count[interface];
|
|
while (num_ports--) {
|
|
/*
|
|
* Give the user a chance to override the per queue
|
|
* priorities.
|
|
*/
|
|
if (cvmx_override_pko_queue_priority)
|
|
cvmx_override_pko_queue_priority(ipd_port, priorities);
|
|
|
|
cvmx_pko_config_port(ipd_port,
|
|
cvmx_pko_get_base_queue_per_core(ipd_port,
|
|
0),
|
|
cvmx_pko_get_num_queues(ipd_port),
|
|
priorities);
|
|
ipd_port++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Setup global setting for PKO not related to a specific
|
|
* interface or port. This must be called before PKO is enabled.
|
|
*
|
|
* Returns Zero on success, negative on failure.
|
|
*/
|
|
static int __cvmx_helper_global_setup_pko(void)
|
|
{
|
|
/*
|
|
* Disable tagwait FAU timeout. This needs to be done before
|
|
* anyone might start packet output using tags.
|
|
*/
|
|
union cvmx_iob_fau_timeout fau_to;
|
|
fau_to.u64 = 0;
|
|
fau_to.s.tout_val = 0xfff;
|
|
fau_to.s.tout_enb = 0;
|
|
cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_to.u64);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Setup global backpressure setting.
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
static int __cvmx_helper_global_setup_backpressure(void)
|
|
{
|
|
#if CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE
|
|
/* Disable backpressure if configured to do so */
|
|
/* Disable backpressure (pause frame) generation */
|
|
int num_interfaces = cvmx_helper_get_number_of_interfaces();
|
|
int interface;
|
|
for (interface = 0; interface < num_interfaces; interface++) {
|
|
switch (cvmx_helper_interface_get_mode(interface)) {
|
|
case CVMX_HELPER_INTERFACE_MODE_DISABLED:
|
|
case CVMX_HELPER_INTERFACE_MODE_PCIE:
|
|
case CVMX_HELPER_INTERFACE_MODE_NPI:
|
|
case CVMX_HELPER_INTERFACE_MODE_LOOP:
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_SPI:
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_PICMG:
|
|
cvmx_gmx_set_backpressure_override(interface, 0xf);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Enable packet input/output from the hardware. This function is
|
|
* called after all internal setup is complete and IPD is enabled.
|
|
* After this function completes, packets will be accepted from the
|
|
* hardware ports. PKO should still be disabled to make sure packets
|
|
* aren't sent out partially setup hardware.
|
|
*
|
|
* @interface: Interface to enable
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
static int __cvmx_helper_packet_hardware_enable(int interface)
|
|
{
|
|
int result = 0;
|
|
switch (cvmx_helper_interface_get_mode(interface)) {
|
|
/* These types don't support ports to IPD/PKO */
|
|
case CVMX_HELPER_INTERFACE_MODE_DISABLED:
|
|
case CVMX_HELPER_INTERFACE_MODE_PCIE:
|
|
/* Nothing to do */
|
|
break;
|
|
/* XAUI is a single high speed port */
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
result = __cvmx_helper_xaui_enable(interface);
|
|
break;
|
|
/*
|
|
* RGMII/GMII/MII are all treated about the same. Most
|
|
* functions refer to these ports as RGMII
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
result = __cvmx_helper_rgmii_enable(interface);
|
|
break;
|
|
/*
|
|
* SPI4 can have 1-16 ports depending on the device at
|
|
* the other end
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_SPI:
|
|
result = __cvmx_helper_spi_enable(interface);
|
|
break;
|
|
/*
|
|
* SGMII can have 1-4 ports depending on how many are
|
|
* hooked up
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_PICMG:
|
|
result = __cvmx_helper_sgmii_enable(interface);
|
|
break;
|
|
/* PCI target Network Packet Interface */
|
|
case CVMX_HELPER_INTERFACE_MODE_NPI:
|
|
result = __cvmx_helper_npi_enable(interface);
|
|
break;
|
|
/*
|
|
* Special loopback only ports. These are not the same
|
|
* as other ports in loopback mode
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_LOOP:
|
|
result = __cvmx_helper_loop_enable(interface);
|
|
break;
|
|
}
|
|
result |= __cvmx_helper_board_hardware_enable(interface);
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* Function to adjust internal IPD pointer alignments
|
|
*
|
|
* Returns 0 on success
|
|
* !0 on failure
|
|
*/
|
|
int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
|
|
{
|
|
#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES \
|
|
(CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_FIRST_MBUFF_SKIP)
|
|
#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES \
|
|
(CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_NOT_FIRST_MBUFF_SKIP)
|
|
#define FIX_IPD_OUTPORT 0
|
|
/* Ports 0-15 are interface 0, 16-31 are interface 1 */
|
|
#define INTERFACE(port) (port >> 4)
|
|
#define INDEX(port) (port & 0xf)
|
|
uint64_t *p64;
|
|
cvmx_pko_command_word0_t pko_command;
|
|
union cvmx_buf_ptr g_buffer, pkt_buffer;
|
|
cvmx_wqe_t *work;
|
|
int size, num_segs = 0, wqe_pcnt, pkt_pcnt;
|
|
union cvmx_gmxx_prtx_cfg gmx_cfg;
|
|
int retry_cnt;
|
|
int retry_loop_cnt;
|
|
int mtu;
|
|
int i;
|
|
cvmx_helper_link_info_t link_info;
|
|
|
|
/* Save values for restore at end */
|
|
uint64_t prtx_cfg =
|
|
cvmx_read_csr(CVMX_GMXX_PRTX_CFG
|
|
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
|
|
uint64_t tx_ptr_en =
|
|
cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)));
|
|
uint64_t rx_ptr_en =
|
|
cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)));
|
|
uint64_t rxx_jabber =
|
|
cvmx_read_csr(CVMX_GMXX_RXX_JABBER
|
|
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
|
|
uint64_t frame_max =
|
|
cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX
|
|
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)));
|
|
|
|
/* Configure port to gig FDX as required for loopback mode */
|
|
cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT);
|
|
|
|
/*
|
|
* Disable reception on all ports so if traffic is present it
|
|
* will not interfere.
|
|
*/
|
|
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0);
|
|
|
|
cvmx_wait(100000000ull);
|
|
|
|
for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) {
|
|
retry_cnt = 100000;
|
|
wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT);
|
|
pkt_pcnt = (wqe_pcnt >> 7) & 0x7f;
|
|
wqe_pcnt &= 0x7f;
|
|
|
|
num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3;
|
|
|
|
if (num_segs == 0)
|
|
goto fix_ipd_exit;
|
|
|
|
num_segs += 1;
|
|
|
|
size =
|
|
FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES +
|
|
((num_segs - 1) * FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) -
|
|
(FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2);
|
|
|
|
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)),
|
|
1 << INDEX(FIX_IPD_OUTPORT));
|
|
CVMX_SYNC;
|
|
|
|
g_buffer.u64 = 0;
|
|
g_buffer.s.addr =
|
|
cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL));
|
|
if (g_buffer.s.addr == 0) {
|
|
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
|
|
"buffer allocation failure.\n");
|
|
goto fix_ipd_exit;
|
|
}
|
|
|
|
g_buffer.s.pool = CVMX_FPA_WQE_POOL;
|
|
g_buffer.s.size = num_segs;
|
|
|
|
pkt_buffer.u64 = 0;
|
|
pkt_buffer.s.addr =
|
|
cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL));
|
|
if (pkt_buffer.s.addr == 0) {
|
|
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
|
|
"buffer allocation failure.\n");
|
|
goto fix_ipd_exit;
|
|
}
|
|
pkt_buffer.s.i = 1;
|
|
pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL;
|
|
pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES;
|
|
|
|
p64 = (uint64_t *) cvmx_phys_to_ptr(pkt_buffer.s.addr);
|
|
p64[0] = 0xffffffffffff0000ull;
|
|
p64[1] = 0x08004510ull;
|
|
p64[2] = ((uint64_t) (size - 14) << 48) | 0x5ae740004000ull;
|
|
p64[3] = 0x3a5fc0a81073c0a8ull;
|
|
|
|
for (i = 0; i < num_segs; i++) {
|
|
if (i > 0)
|
|
pkt_buffer.s.size =
|
|
FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES;
|
|
|
|
if (i == (num_segs - 1))
|
|
pkt_buffer.s.i = 0;
|
|
|
|
*(uint64_t *) cvmx_phys_to_ptr(g_buffer.s.addr +
|
|
8 * i) = pkt_buffer.u64;
|
|
}
|
|
|
|
/* Build the PKO command */
|
|
pko_command.u64 = 0;
|
|
pko_command.s.segs = num_segs;
|
|
pko_command.s.total_bytes = size;
|
|
pko_command.s.dontfree = 0;
|
|
pko_command.s.gather = 1;
|
|
|
|
gmx_cfg.u64 =
|
|
cvmx_read_csr(CVMX_GMXX_PRTX_CFG
|
|
(INDEX(FIX_IPD_OUTPORT),
|
|
INTERFACE(FIX_IPD_OUTPORT)));
|
|
gmx_cfg.s.en = 1;
|
|
cvmx_write_csr(CVMX_GMXX_PRTX_CFG
|
|
(INDEX(FIX_IPD_OUTPORT),
|
|
INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64);
|
|
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
|
|
1 << INDEX(FIX_IPD_OUTPORT));
|
|
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
|
|
1 << INDEX(FIX_IPD_OUTPORT));
|
|
|
|
mtu =
|
|
cvmx_read_csr(CVMX_GMXX_RXX_JABBER
|
|
(INDEX(FIX_IPD_OUTPORT),
|
|
INTERFACE(FIX_IPD_OUTPORT)));
|
|
cvmx_write_csr(CVMX_GMXX_RXX_JABBER
|
|
(INDEX(FIX_IPD_OUTPORT),
|
|
INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4);
|
|
cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX
|
|
(INDEX(FIX_IPD_OUTPORT),
|
|
INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4);
|
|
|
|
cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT,
|
|
cvmx_pko_get_base_queue
|
|
(FIX_IPD_OUTPORT),
|
|
CVMX_PKO_LOCK_CMD_QUEUE);
|
|
cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT,
|
|
cvmx_pko_get_base_queue
|
|
(FIX_IPD_OUTPORT), pko_command,
|
|
g_buffer, CVMX_PKO_LOCK_CMD_QUEUE);
|
|
|
|
CVMX_SYNC;
|
|
|
|
do {
|
|
work = cvmx_pow_work_request_sync(CVMX_POW_WAIT);
|
|
retry_cnt--;
|
|
} while ((work == NULL) && (retry_cnt > 0));
|
|
|
|
if (!retry_cnt)
|
|
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
|
|
"get_work() timeout occured.\n");
|
|
|
|
/* Free packet */
|
|
if (work)
|
|
cvmx_helper_free_packet_data(work);
|
|
}
|
|
|
|
fix_ipd_exit:
|
|
|
|
/* Return CSR configs to saved values */
|
|
cvmx_write_csr(CVMX_GMXX_PRTX_CFG
|
|
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
|
|
prtx_cfg);
|
|
cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
|
|
tx_ptr_en);
|
|
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)),
|
|
rx_ptr_en);
|
|
cvmx_write_csr(CVMX_GMXX_RXX_JABBER
|
|
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
|
|
rxx_jabber);
|
|
cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX
|
|
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
|
|
frame_max);
|
|
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
|
|
/* Set link to down so autonegotiation will set it up again */
|
|
link_info.u64 = 0;
|
|
cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
|
|
|
|
/*
|
|
* Bring the link back up as autonegotiation is not done in
|
|
* user applications.
|
|
*/
|
|
cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
|
|
|
|
CVMX_SYNC;
|
|
if (num_segs)
|
|
cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n");
|
|
|
|
return !!num_segs;
|
|
|
|
}
|
|
|
|
/**
|
|
* Called after all internal packet IO paths are setup. This
|
|
* function enables IPD/PIP and begins packet input and output.
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
int cvmx_helper_ipd_and_packet_input_enable(void)
|
|
{
|
|
int num_interfaces;
|
|
int interface;
|
|
|
|
/* Enable IPD */
|
|
cvmx_ipd_enable();
|
|
|
|
/*
|
|
* Time to enable hardware ports packet input and output. Note
|
|
* that at this point IPD/PIP must be fully functional and PKO
|
|
* must be disabled
|
|
*/
|
|
num_interfaces = cvmx_helper_get_number_of_interfaces();
|
|
for (interface = 0; interface < num_interfaces; interface++) {
|
|
if (cvmx_helper_ports_on_interface(interface) > 0)
|
|
__cvmx_helper_packet_hardware_enable(interface);
|
|
}
|
|
|
|
/* Finally enable PKO now that the entire path is up and running */
|
|
cvmx_pko_enable();
|
|
|
|
if ((OCTEON_IS_MODEL(OCTEON_CN31XX_PASS1)
|
|
|| OCTEON_IS_MODEL(OCTEON_CN30XX_PASS1))
|
|
&& (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM))
|
|
__cvmx_helper_errata_fix_ipd_ptr_alignment();
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Initialize the PIP, IPD, and PKO hardware to support
|
|
* simple priority based queues for the ethernet ports. Each
|
|
* port is configured with a number of priority queues based
|
|
* on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
|
|
* priority than the previous.
|
|
*
|
|
* Returns Zero on success, non-zero on failure
|
|
*/
|
|
int cvmx_helper_initialize_packet_io_global(void)
|
|
{
|
|
int result = 0;
|
|
int interface;
|
|
union cvmx_l2c_cfg l2c_cfg;
|
|
union cvmx_smix_en smix_en;
|
|
const int num_interfaces = cvmx_helper_get_number_of_interfaces();
|
|
|
|
/*
|
|
* CN52XX pass 1: Due to a bug in 2nd order CDR, it needs to
|
|
* be disabled.
|
|
*/
|
|
if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0))
|
|
__cvmx_helper_errata_qlm_disable_2nd_order_cdr(1);
|
|
|
|
/*
|
|
* Tell L2 to give the IOB statically higher priority compared
|
|
* to the cores. This avoids conditions where IO blocks might
|
|
* be starved under very high L2 loads.
|
|
*/
|
|
l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG);
|
|
l2c_cfg.s.lrf_arb_mode = 0;
|
|
l2c_cfg.s.rfb_arb_mode = 0;
|
|
cvmx_write_csr(CVMX_L2C_CFG, l2c_cfg.u64);
|
|
|
|
/* Make sure SMI/MDIO is enabled so we can query PHYs */
|
|
smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(0));
|
|
if (!smix_en.s.en) {
|
|
smix_en.s.en = 1;
|
|
cvmx_write_csr(CVMX_SMIX_EN(0), smix_en.u64);
|
|
}
|
|
|
|
/* Newer chips actually have two SMI/MDIO interfaces */
|
|
if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) &&
|
|
!OCTEON_IS_MODEL(OCTEON_CN58XX) &&
|
|
!OCTEON_IS_MODEL(OCTEON_CN50XX)) {
|
|
smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(1));
|
|
if (!smix_en.s.en) {
|
|
smix_en.s.en = 1;
|
|
cvmx_write_csr(CVMX_SMIX_EN(1), smix_en.u64);
|
|
}
|
|
}
|
|
|
|
cvmx_pko_initialize_global();
|
|
for (interface = 0; interface < num_interfaces; interface++) {
|
|
result |= cvmx_helper_interface_probe(interface);
|
|
if (cvmx_helper_ports_on_interface(interface) > 0)
|
|
cvmx_dprintf("Interface %d has %d ports (%s)\n",
|
|
interface,
|
|
cvmx_helper_ports_on_interface(interface),
|
|
cvmx_helper_interface_mode_to_string
|
|
(cvmx_helper_interface_get_mode
|
|
(interface)));
|
|
result |= __cvmx_helper_interface_setup_ipd(interface);
|
|
result |= __cvmx_helper_interface_setup_pko(interface);
|
|
}
|
|
|
|
result |= __cvmx_helper_global_setup_ipd();
|
|
result |= __cvmx_helper_global_setup_pko();
|
|
|
|
/* Enable any flow control and backpressure */
|
|
result |= __cvmx_helper_global_setup_backpressure();
|
|
|
|
#if CVMX_HELPER_ENABLE_IPD
|
|
result |= cvmx_helper_ipd_and_packet_input_enable();
|
|
#endif
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* Does core local initialization for packet io
|
|
*
|
|
* Returns Zero on success, non-zero on failure
|
|
*/
|
|
int cvmx_helper_initialize_packet_io_local(void)
|
|
{
|
|
return cvmx_pko_initialize_local();
|
|
}
|
|
|
|
/**
|
|
* Auto configure an IPD/PKO port link state and speed. This
|
|
* function basically does the equivalent of:
|
|
* cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
|
|
*
|
|
* @ipd_port: IPD/PKO port to auto configure
|
|
*
|
|
* Returns Link state after configure
|
|
*/
|
|
cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port)
|
|
{
|
|
cvmx_helper_link_info_t link_info;
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
|
|
if (index >= cvmx_helper_ports_on_interface(interface)) {
|
|
link_info.u64 = 0;
|
|
return link_info;
|
|
}
|
|
|
|
link_info = cvmx_helper_link_get(ipd_port);
|
|
if (link_info.u64 == port_link_info[ipd_port].u64)
|
|
return link_info;
|
|
|
|
/* If we fail to set the link speed, port_link_info will not change */
|
|
cvmx_helper_link_set(ipd_port, link_info);
|
|
|
|
/*
|
|
* port_link_info should be the current value, which will be
|
|
* different than expect if cvmx_helper_link_set() failed.
|
|
*/
|
|
return port_link_info[ipd_port];
|
|
}
|
|
|
|
/**
|
|
* Return the link state of an IPD/PKO port as returned by
|
|
* auto negotiation. The result of this function may not match
|
|
* Octeon's link config if auto negotiation has changed since
|
|
* the last call to cvmx_helper_link_set().
|
|
*
|
|
* @ipd_port: IPD/PKO port to query
|
|
*
|
|
* Returns Link state
|
|
*/
|
|
cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
|
|
/* The default result will be a down link unless the code below
|
|
changes it */
|
|
result.u64 = 0;
|
|
|
|
if (index >= cvmx_helper_ports_on_interface(interface))
|
|
return result;
|
|
|
|
switch (cvmx_helper_interface_get_mode(interface)) {
|
|
case CVMX_HELPER_INTERFACE_MODE_DISABLED:
|
|
case CVMX_HELPER_INTERFACE_MODE_PCIE:
|
|
/* Network links are not supported */
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
result = __cvmx_helper_xaui_link_get(ipd_port);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
if (index == 0)
|
|
result = __cvmx_helper_rgmii_link_get(ipd_port);
|
|
else {
|
|
result.s.full_duplex = 1;
|
|
result.s.link_up = 1;
|
|
result.s.speed = 1000;
|
|
}
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
result = __cvmx_helper_rgmii_link_get(ipd_port);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_SPI:
|
|
result = __cvmx_helper_spi_link_get(ipd_port);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_PICMG:
|
|
result = __cvmx_helper_sgmii_link_get(ipd_port);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_NPI:
|
|
case CVMX_HELPER_INTERFACE_MODE_LOOP:
|
|
/* Network links are not supported */
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* Configure an IPD/PKO port for the specified link state. This
|
|
* function does not influence auto negotiation at the PHY level.
|
|
* The passed link state must always match the link state returned
|
|
* by cvmx_helper_link_get(). It is normally best to use
|
|
* cvmx_helper_link_autoconf() instead.
|
|
*
|
|
* @ipd_port: IPD/PKO port to configure
|
|
* @link_info: The new link state
|
|
*
|
|
* Returns Zero on success, negative on failure
|
|
*/
|
|
int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
|
|
{
|
|
int result = -1;
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
|
|
if (index >= cvmx_helper_ports_on_interface(interface))
|
|
return -1;
|
|
|
|
switch (cvmx_helper_interface_get_mode(interface)) {
|
|
case CVMX_HELPER_INTERFACE_MODE_DISABLED:
|
|
case CVMX_HELPER_INTERFACE_MODE_PCIE:
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
result = __cvmx_helper_xaui_link_set(ipd_port, link_info);
|
|
break;
|
|
/*
|
|
* RGMII/GMII/MII are all treated about the same. Most
|
|
* functions refer to these ports as RGMII.
|
|
*/
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
result = __cvmx_helper_rgmii_link_set(ipd_port, link_info);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_SPI:
|
|
result = __cvmx_helper_spi_link_set(ipd_port, link_info);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_PICMG:
|
|
result = __cvmx_helper_sgmii_link_set(ipd_port, link_info);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_NPI:
|
|
case CVMX_HELPER_INTERFACE_MODE_LOOP:
|
|
break;
|
|
}
|
|
/* Set the port_link_info here so that the link status is updated
|
|
no matter how cvmx_helper_link_set is called. We don't change
|
|
the value if link_set failed */
|
|
if (result == 0)
|
|
port_link_info[ipd_port].u64 = link_info.u64;
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* Configure a port for internal and/or external loopback. Internal loopback
|
|
* causes packets sent by the port to be received by Octeon. External loopback
|
|
* causes packets received from the wire to sent out again.
|
|
*
|
|
* @ipd_port: IPD/PKO port to loopback.
|
|
* @enable_internal:
|
|
* Non zero if you want internal loopback
|
|
* @enable_external:
|
|
* Non zero if you want external loopback
|
|
*
|
|
* Returns Zero on success, negative on failure.
|
|
*/
|
|
int cvmx_helper_configure_loopback(int ipd_port, int enable_internal,
|
|
int enable_external)
|
|
{
|
|
int result = -1;
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
|
|
if (index >= cvmx_helper_ports_on_interface(interface))
|
|
return -1;
|
|
|
|
switch (cvmx_helper_interface_get_mode(interface)) {
|
|
case CVMX_HELPER_INTERFACE_MODE_DISABLED:
|
|
case CVMX_HELPER_INTERFACE_MODE_PCIE:
|
|
case CVMX_HELPER_INTERFACE_MODE_SPI:
|
|
case CVMX_HELPER_INTERFACE_MODE_NPI:
|
|
case CVMX_HELPER_INTERFACE_MODE_LOOP:
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
result =
|
|
__cvmx_helper_xaui_configure_loopback(ipd_port,
|
|
enable_internal,
|
|
enable_external);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
result =
|
|
__cvmx_helper_rgmii_configure_loopback(ipd_port,
|
|
enable_internal,
|
|
enable_external);
|
|
break;
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_PICMG:
|
|
result =
|
|
__cvmx_helper_sgmii_configure_loopback(ipd_port,
|
|
enable_internal,
|
|
enable_external);
|
|
break;
|
|
}
|
|
return result;
|
|
}
|