![David Woodhouse](/assets/img/avatar_default.png)
It'll take some work before this is really shippable. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2602 lines
70 KiB
C
2602 lines
70 KiB
C
/*
|
|
* NAND Flash Controller Device Driver
|
|
* Copyright (c) 2009, Intel Corporation and its suppliers.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*
|
|
*/
|
|
|
|
#include "lld.h"
|
|
#include "lld_nand.h"
|
|
#include "lld_cdma.h"
|
|
|
|
#include "spectraswconfig.h"
|
|
#include "flash.h"
|
|
#include "ffsdefs.h"
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include "nand_regs.h"
|
|
|
|
#define SPECTRA_NAND_NAME "nd"
|
|
|
|
#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
|
|
#define MAX_PAGES_PER_RW 128
|
|
|
|
#define INT_IDLE_STATE 0
|
|
#define INT_READ_PAGE_MAIN 0x01
|
|
#define INT_WRITE_PAGE_MAIN 0x02
|
|
#define INT_PIPELINE_READ_AHEAD 0x04
|
|
#define INT_PIPELINE_WRITE_AHEAD 0x08
|
|
#define INT_MULTI_PLANE_READ 0x10
|
|
#define INT_MULTI_PLANE_WRITE 0x11
|
|
|
|
static u32 enable_ecc;
|
|
|
|
struct mrst_nand_info info;
|
|
|
|
int totalUsedBanks;
|
|
u32 GLOB_valid_banks[LLD_MAX_FLASH_BANKS];
|
|
|
|
void __iomem *FlashReg;
|
|
void __iomem *FlashMem;
|
|
|
|
u16 conf_parameters[] = {
|
|
0x0000,
|
|
0x0000,
|
|
0x01F4,
|
|
0x01F4,
|
|
0x01F4,
|
|
0x01F4,
|
|
0x0000,
|
|
0x0000,
|
|
0x0001,
|
|
0x0000,
|
|
0x0000,
|
|
0x0000,
|
|
0x0000,
|
|
0x0040,
|
|
0x0001,
|
|
0x000A,
|
|
0x000A,
|
|
0x000A,
|
|
0x0000,
|
|
0x0000,
|
|
0x0005,
|
|
0x0012,
|
|
0x000C
|
|
};
|
|
|
|
u16 NAND_Get_Bad_Block(u32 block)
|
|
{
|
|
u32 status = PASS;
|
|
u32 flag_bytes = 0;
|
|
u32 skip_bytes = DeviceInfo.wSpareSkipBytes;
|
|
u32 page, i;
|
|
u8 *pReadSpareBuf = buf_get_bad_block;
|
|
|
|
if (enable_ecc)
|
|
flag_bytes = DeviceInfo.wNumPageSpareFlag;
|
|
|
|
for (page = 0; page < 2; page++) {
|
|
status = NAND_Read_Page_Spare(pReadSpareBuf, block, page, 1);
|
|
if (status != PASS)
|
|
return READ_ERROR;
|
|
for (i = flag_bytes; i < (flag_bytes + skip_bytes); i++)
|
|
if (pReadSpareBuf[i] != 0xff)
|
|
return DEFECTIVE_BLOCK;
|
|
}
|
|
|
|
for (page = 1; page < 3; page++) {
|
|
status = NAND_Read_Page_Spare(pReadSpareBuf, block,
|
|
DeviceInfo.wPagesPerBlock - page , 1);
|
|
if (status != PASS)
|
|
return READ_ERROR;
|
|
for (i = flag_bytes; i < (flag_bytes + skip_bytes); i++)
|
|
if (pReadSpareBuf[i] != 0xff)
|
|
return DEFECTIVE_BLOCK;
|
|
}
|
|
|
|
return GOOD_BLOCK;
|
|
}
|
|
|
|
|
|
u16 NAND_Flash_Reset(void)
|
|
{
|
|
u32 i;
|
|
u32 intr_status_rst_comp[4] = {INTR_STATUS0__RST_COMP,
|
|
INTR_STATUS1__RST_COMP,
|
|
INTR_STATUS2__RST_COMP,
|
|
INTR_STATUS3__RST_COMP};
|
|
u32 intr_status_time_out[4] = {INTR_STATUS0__TIME_OUT,
|
|
INTR_STATUS1__TIME_OUT,
|
|
INTR_STATUS2__TIME_OUT,
|
|
INTR_STATUS3__TIME_OUT};
|
|
u32 intr_status[4] = {INTR_STATUS0, INTR_STATUS1,
|
|
INTR_STATUS2, INTR_STATUS3};
|
|
u32 device_reset_banks[4] = {DEVICE_RESET__BANK0,
|
|
DEVICE_RESET__BANK1,
|
|
DEVICE_RESET__BANK2,
|
|
DEVICE_RESET__BANK3};
|
|
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
|
|
iowrite32(intr_status_rst_comp[i] | intr_status_time_out[i],
|
|
FlashReg + intr_status[i]);
|
|
|
|
for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
|
|
iowrite32(device_reset_banks[i], FlashReg + DEVICE_RESET);
|
|
while (!(ioread32(FlashReg + intr_status[i]) &
|
|
(intr_status_rst_comp[i] | intr_status_time_out[i])))
|
|
;
|
|
if (ioread32(FlashReg + intr_status[i]) &
|
|
intr_status_time_out[i])
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"NAND Reset operation timed out on bank %d\n", i);
|
|
}
|
|
|
|
for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
|
|
iowrite32(intr_status_rst_comp[i] | intr_status_time_out[i],
|
|
FlashReg + intr_status[i]);
|
|
|
|
return PASS;
|
|
}
|
|
|
|
static void NAND_ONFi_Timing_Mode(u16 mode)
|
|
{
|
|
u16 Trea[6] = {40, 30, 25, 20, 20, 16};
|
|
u16 Trp[6] = {50, 25, 17, 15, 12, 10};
|
|
u16 Treh[6] = {30, 15, 15, 10, 10, 7};
|
|
u16 Trc[6] = {100, 50, 35, 30, 25, 20};
|
|
u16 Trhoh[6] = {0, 15, 15, 15, 15, 15};
|
|
u16 Trloh[6] = {0, 0, 0, 0, 5, 5};
|
|
u16 Tcea[6] = {100, 45, 30, 25, 25, 25};
|
|
u16 Tadl[6] = {200, 100, 100, 100, 70, 70};
|
|
u16 Trhw[6] = {200, 100, 100, 100, 100, 100};
|
|
u16 Trhz[6] = {200, 100, 100, 100, 100, 100};
|
|
u16 Twhr[6] = {120, 80, 80, 60, 60, 60};
|
|
u16 Tcs[6] = {70, 35, 25, 25, 20, 15};
|
|
|
|
u16 TclsRising = 1;
|
|
u16 data_invalid_rhoh, data_invalid_rloh, data_invalid;
|
|
u16 dv_window = 0;
|
|
u16 en_lo, en_hi;
|
|
u16 acc_clks;
|
|
u16 addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
|
|
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
en_lo = CEIL_DIV(Trp[mode], CLK_X);
|
|
en_hi = CEIL_DIV(Treh[mode], CLK_X);
|
|
|
|
#if ONFI_BLOOM_TIME
|
|
if ((en_hi * CLK_X) < (Treh[mode] + 2))
|
|
en_hi++;
|
|
#endif
|
|
|
|
if ((en_lo + en_hi) * CLK_X < Trc[mode])
|
|
en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X);
|
|
|
|
if ((en_lo + en_hi) < CLK_MULTI)
|
|
en_lo += CLK_MULTI - en_lo - en_hi;
|
|
|
|
while (dv_window < 8) {
|
|
data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode];
|
|
|
|
data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode];
|
|
|
|
data_invalid =
|
|
data_invalid_rhoh <
|
|
data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh;
|
|
|
|
dv_window = data_invalid - Trea[mode];
|
|
|
|
if (dv_window < 8)
|
|
en_lo++;
|
|
}
|
|
|
|
acc_clks = CEIL_DIV(Trea[mode], CLK_X);
|
|
|
|
while (((acc_clks * CLK_X) - Trea[mode]) < 3)
|
|
acc_clks++;
|
|
|
|
if ((data_invalid - acc_clks * CLK_X) < 2)
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
|
|
re_2_we = CEIL_DIV(Trhw[mode], CLK_X);
|
|
re_2_re = CEIL_DIV(Trhz[mode], CLK_X);
|
|
we_2_re = CEIL_DIV(Twhr[mode], CLK_X);
|
|
cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X);
|
|
if (!TclsRising)
|
|
cs_cnt = CEIL_DIV(Tcs[mode], CLK_X);
|
|
if (cs_cnt == 0)
|
|
cs_cnt = 1;
|
|
|
|
if (Tcea[mode]) {
|
|
while (((cs_cnt * CLK_X) + Trea[mode]) < Tcea[mode])
|
|
cs_cnt++;
|
|
}
|
|
|
|
#if MODE5_WORKAROUND
|
|
if (mode == 5)
|
|
acc_clks = 5;
|
|
#endif
|
|
|
|
/* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
|
|
if ((ioread32(FlashReg + MANUFACTURER_ID) == 0) &&
|
|
(ioread32(FlashReg + DEVICE_ID) == 0x88))
|
|
acc_clks = 6;
|
|
|
|
iowrite32(acc_clks, FlashReg + ACC_CLKS);
|
|
iowrite32(re_2_we, FlashReg + RE_2_WE);
|
|
iowrite32(re_2_re, FlashReg + RE_2_RE);
|
|
iowrite32(we_2_re, FlashReg + WE_2_RE);
|
|
iowrite32(addr_2_data, FlashReg + ADDR_2_DATA);
|
|
iowrite32(en_lo, FlashReg + RDWR_EN_LO_CNT);
|
|
iowrite32(en_hi, FlashReg + RDWR_EN_HI_CNT);
|
|
iowrite32(cs_cnt, FlashReg + CS_SETUP_CNT);
|
|
}
|
|
|
|
static void index_addr(u32 address, u32 data)
|
|
{
|
|
iowrite32(address, FlashMem);
|
|
iowrite32(data, FlashMem + 0x10);
|
|
}
|
|
|
|
static void index_addr_read_data(u32 address, u32 *pdata)
|
|
{
|
|
iowrite32(address, FlashMem);
|
|
*pdata = ioread32(FlashMem + 0x10);
|
|
}
|
|
|
|
static void set_ecc_config(void)
|
|
{
|
|
#if SUPPORT_8BITECC
|
|
if ((ioread32(FlashReg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
|
|
(ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE) <= 128))
|
|
iowrite32(8, FlashReg + ECC_CORRECTION);
|
|
#endif
|
|
|
|
if ((ioread32(FlashReg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
|
|
== 1) {
|
|
DeviceInfo.wECCBytesPerSector = 4;
|
|
DeviceInfo.wECCBytesPerSector *= DeviceInfo.wDevicesConnected;
|
|
DeviceInfo.wNumPageSpareFlag =
|
|
DeviceInfo.wPageSpareSize -
|
|
DeviceInfo.wPageDataSize /
|
|
(ECC_SECTOR_SIZE * DeviceInfo.wDevicesConnected) *
|
|
DeviceInfo.wECCBytesPerSector
|
|
- DeviceInfo.wSpareSkipBytes;
|
|
} else {
|
|
DeviceInfo.wECCBytesPerSector =
|
|
(ioread32(FlashReg + ECC_CORRECTION) &
|
|
ECC_CORRECTION__VALUE) * 13 / 8;
|
|
if ((DeviceInfo.wECCBytesPerSector) % 2 == 0)
|
|
DeviceInfo.wECCBytesPerSector += 2;
|
|
else
|
|
DeviceInfo.wECCBytesPerSector += 1;
|
|
|
|
DeviceInfo.wECCBytesPerSector *= DeviceInfo.wDevicesConnected;
|
|
DeviceInfo.wNumPageSpareFlag = DeviceInfo.wPageSpareSize -
|
|
DeviceInfo.wPageDataSize /
|
|
(ECC_SECTOR_SIZE * DeviceInfo.wDevicesConnected) *
|
|
DeviceInfo.wECCBytesPerSector
|
|
- DeviceInfo.wSpareSkipBytes;
|
|
}
|
|
}
|
|
|
|
static u16 get_onfi_nand_para(void)
|
|
{
|
|
int i;
|
|
u16 blks_lun_l, blks_lun_h, n_of_luns;
|
|
u32 blockperlun, id;
|
|
|
|
iowrite32(DEVICE_RESET__BANK0, FlashReg + DEVICE_RESET);
|
|
|
|
while (!((ioread32(FlashReg + INTR_STATUS0) &
|
|
INTR_STATUS0__RST_COMP) |
|
|
(ioread32(FlashReg + INTR_STATUS0) &
|
|
INTR_STATUS0__TIME_OUT)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
|
|
iowrite32(DEVICE_RESET__BANK1, FlashReg + DEVICE_RESET);
|
|
while (!((ioread32(FlashReg + INTR_STATUS1) &
|
|
INTR_STATUS1__RST_COMP) |
|
|
(ioread32(FlashReg + INTR_STATUS1) &
|
|
INTR_STATUS1__TIME_OUT)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + INTR_STATUS1) &
|
|
INTR_STATUS1__RST_COMP) {
|
|
iowrite32(DEVICE_RESET__BANK2,
|
|
FlashReg + DEVICE_RESET);
|
|
while (!((ioread32(FlashReg + INTR_STATUS2) &
|
|
INTR_STATUS2__RST_COMP) |
|
|
(ioread32(FlashReg + INTR_STATUS2) &
|
|
INTR_STATUS2__TIME_OUT)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + INTR_STATUS2) &
|
|
INTR_STATUS2__RST_COMP) {
|
|
iowrite32(DEVICE_RESET__BANK3,
|
|
FlashReg + DEVICE_RESET);
|
|
while (!((ioread32(FlashReg + INTR_STATUS3) &
|
|
INTR_STATUS3__RST_COMP) |
|
|
(ioread32(FlashReg + INTR_STATUS3) &
|
|
INTR_STATUS3__TIME_OUT)))
|
|
;
|
|
} else {
|
|
printk(KERN_ERR "Getting a time out for bank 2!\n");
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "Getting a time out for bank 1!\n");
|
|
}
|
|
}
|
|
|
|
iowrite32(INTR_STATUS0__TIME_OUT, FlashReg + INTR_STATUS0);
|
|
iowrite32(INTR_STATUS1__TIME_OUT, FlashReg + INTR_STATUS1);
|
|
iowrite32(INTR_STATUS2__TIME_OUT, FlashReg + INTR_STATUS2);
|
|
iowrite32(INTR_STATUS3__TIME_OUT, FlashReg + INTR_STATUS3);
|
|
|
|
DeviceInfo.wONFIDevFeatures =
|
|
ioread32(FlashReg + ONFI_DEVICE_FEATURES);
|
|
DeviceInfo.wONFIOptCommands =
|
|
ioread32(FlashReg + ONFI_OPTIONAL_COMMANDS);
|
|
DeviceInfo.wONFITimingMode =
|
|
ioread32(FlashReg + ONFI_TIMING_MODE);
|
|
DeviceInfo.wONFIPgmCacheTimingMode =
|
|
ioread32(FlashReg + ONFI_PGM_CACHE_TIMING_MODE);
|
|
|
|
n_of_luns = ioread32(FlashReg + ONFI_DEVICE_NO_OF_LUNS) &
|
|
ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
|
|
blks_lun_l = ioread32(FlashReg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
|
|
blks_lun_h = ioread32(FlashReg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
|
|
|
|
blockperlun = (blks_lun_h << 16) | blks_lun_l;
|
|
|
|
DeviceInfo.wTotalBlocks = n_of_luns * blockperlun;
|
|
|
|
if (!(ioread32(FlashReg + ONFI_TIMING_MODE) &
|
|
ONFI_TIMING_MODE__VALUE))
|
|
return FAIL;
|
|
|
|
for (i = 5; i > 0; i--) {
|
|
if (ioread32(FlashReg + ONFI_TIMING_MODE) & (0x01 << i))
|
|
break;
|
|
}
|
|
|
|
NAND_ONFi_Timing_Mode(i);
|
|
|
|
index_addr(MODE_11 | 0, 0x90);
|
|
index_addr(MODE_11 | 1, 0);
|
|
|
|
for (i = 0; i < 3; i++)
|
|
index_addr_read_data(MODE_11 | 2, &id);
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
|
|
|
|
DeviceInfo.MLCDevice = id & 0x0C;
|
|
|
|
/* By now, all the ONFI devices we know support the page cache */
|
|
/* rw feature. So here we enable the pipeline_rw_ahead feature */
|
|
/* iowrite32(1, FlashReg + CACHE_WRITE_ENABLE); */
|
|
/* iowrite32(1, FlashReg + CACHE_READ_ENABLE); */
|
|
|
|
return PASS;
|
|
}
|
|
|
|
static void get_samsung_nand_para(void)
|
|
{
|
|
u8 no_of_planes;
|
|
u32 blk_size;
|
|
u64 plane_size, capacity;
|
|
u32 id_bytes[5];
|
|
int i;
|
|
|
|
index_addr((u32)(MODE_11 | 0), 0x90);
|
|
index_addr((u32)(MODE_11 | 1), 0);
|
|
for (i = 0; i < 5; i++)
|
|
index_addr_read_data((u32)(MODE_11 | 2), &id_bytes[i]);
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG,
|
|
"ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
|
|
id_bytes[0], id_bytes[1], id_bytes[2],
|
|
id_bytes[3], id_bytes[4]);
|
|
|
|
if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
|
|
/* Set timing register values according to datasheet */
|
|
iowrite32(5, FlashReg + ACC_CLKS);
|
|
iowrite32(20, FlashReg + RE_2_WE);
|
|
iowrite32(12, FlashReg + WE_2_RE);
|
|
iowrite32(14, FlashReg + ADDR_2_DATA);
|
|
iowrite32(3, FlashReg + RDWR_EN_LO_CNT);
|
|
iowrite32(2, FlashReg + RDWR_EN_HI_CNT);
|
|
iowrite32(2, FlashReg + CS_SETUP_CNT);
|
|
}
|
|
|
|
no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
|
|
plane_size = (u64)64 << ((id_bytes[4] & 0x70) >> 4);
|
|
blk_size = 64 << ((ioread32(FlashReg + DEVICE_PARAM_1) & 0x30) >> 4);
|
|
capacity = (u64)128 * plane_size * no_of_planes;
|
|
|
|
DeviceInfo.wTotalBlocks = (u32)GLOB_u64_Div(capacity, blk_size);
|
|
}
|
|
|
|
static void get_toshiba_nand_para(void)
|
|
{
|
|
void __iomem *scratch_reg;
|
|
u32 tmp;
|
|
|
|
/* Workaround to fix a controller bug which reports a wrong */
|
|
/* spare area size for some kind of Toshiba NAND device */
|
|
if ((ioread32(FlashReg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
|
|
(ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE) == 64)) {
|
|
iowrite32(216, FlashReg + DEVICE_SPARE_AREA_SIZE);
|
|
tmp = ioread32(FlashReg + DEVICES_CONNECTED) *
|
|
ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE);
|
|
iowrite32(tmp, FlashReg + LOGICAL_PAGE_SPARE_SIZE);
|
|
#if SUPPORT_15BITECC
|
|
iowrite32(15, FlashReg + ECC_CORRECTION);
|
|
#elif SUPPORT_8BITECC
|
|
iowrite32(8, FlashReg + ECC_CORRECTION);
|
|
#endif
|
|
}
|
|
|
|
/* As Toshiba NAND can not provide it's block number, */
|
|
/* so here we need user to provide the correct block */
|
|
/* number in a scratch register before the Linux NAND */
|
|
/* driver is loaded. If no valid value found in the scratch */
|
|
/* register, then we use default block number value */
|
|
scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
|
|
if (!scratch_reg) {
|
|
printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
|
|
__FILE__, __LINE__);
|
|
DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
|
|
} else {
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
|
|
DeviceInfo.wTotalBlocks = 1 << ioread8(scratch_reg);
|
|
if (DeviceInfo.wTotalBlocks < 512)
|
|
DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
|
|
iounmap(scratch_reg);
|
|
}
|
|
}
|
|
|
|
static void get_hynix_nand_para(void)
|
|
{
|
|
void __iomem *scratch_reg;
|
|
u32 main_size, spare_size;
|
|
|
|
switch (DeviceInfo.wDeviceID) {
|
|
case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
|
|
case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
|
|
iowrite32(128, FlashReg + PAGES_PER_BLOCK);
|
|
iowrite32(4096, FlashReg + DEVICE_MAIN_AREA_SIZE);
|
|
iowrite32(224, FlashReg + DEVICE_SPARE_AREA_SIZE);
|
|
main_size = 4096 * ioread32(FlashReg + DEVICES_CONNECTED);
|
|
spare_size = 224 * ioread32(FlashReg + DEVICES_CONNECTED);
|
|
iowrite32(main_size, FlashReg + LOGICAL_PAGE_DATA_SIZE);
|
|
iowrite32(spare_size, FlashReg + LOGICAL_PAGE_SPARE_SIZE);
|
|
iowrite32(0, FlashReg + DEVICE_WIDTH);
|
|
#if SUPPORT_15BITECC
|
|
iowrite32(15, FlashReg + ECC_CORRECTION);
|
|
#elif SUPPORT_8BITECC
|
|
iowrite32(8, FlashReg + ECC_CORRECTION);
|
|
#endif
|
|
DeviceInfo.MLCDevice = 1;
|
|
break;
|
|
default:
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
|
|
"Will use default parameter values instead.\n",
|
|
DeviceInfo.wDeviceID);
|
|
}
|
|
|
|
scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
|
|
if (!scratch_reg) {
|
|
printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
|
|
__FILE__, __LINE__);
|
|
DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
|
|
} else {
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
|
|
DeviceInfo.wTotalBlocks = 1 << ioread8(scratch_reg);
|
|
if (DeviceInfo.wTotalBlocks < 512)
|
|
DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
|
|
iounmap(scratch_reg);
|
|
}
|
|
}
|
|
|
|
static void find_valid_banks(void)
|
|
{
|
|
u32 id[LLD_MAX_FLASH_BANKS];
|
|
int i;
|
|
|
|
totalUsedBanks = 0;
|
|
for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
|
|
index_addr((u32)(MODE_11 | (i << 24) | 0), 0x90);
|
|
index_addr((u32)(MODE_11 | (i << 24) | 1), 0);
|
|
index_addr_read_data((u32)(MODE_11 | (i << 24) | 2), &id[i]);
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG,
|
|
"Return 1st ID for bank[%d]: %x\n", i, id[i]);
|
|
|
|
if (i == 0) {
|
|
if (id[i] & 0x0ff)
|
|
GLOB_valid_banks[i] = 1;
|
|
} else {
|
|
if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
|
|
GLOB_valid_banks[i] = 1;
|
|
}
|
|
|
|
totalUsedBanks += GLOB_valid_banks[i];
|
|
}
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG,
|
|
"totalUsedBanks: %d\n", totalUsedBanks);
|
|
}
|
|
|
|
static void detect_partition_feature(void)
|
|
{
|
|
if (ioread32(FlashReg + FEATURES) & FEATURES__PARTITION) {
|
|
if ((ioread32(FlashReg + PERM_SRC_ID_1) &
|
|
PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
|
|
DeviceInfo.wSpectraStartBlock =
|
|
((ioread32(FlashReg + MIN_MAX_BANK_1) &
|
|
MIN_MAX_BANK_1__MIN_VALUE) *
|
|
DeviceInfo.wTotalBlocks)
|
|
+
|
|
(ioread32(FlashReg + MIN_BLK_ADDR_1) &
|
|
MIN_BLK_ADDR_1__VALUE);
|
|
|
|
DeviceInfo.wSpectraEndBlock =
|
|
(((ioread32(FlashReg + MIN_MAX_BANK_1) &
|
|
MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
|
|
DeviceInfo.wTotalBlocks)
|
|
+
|
|
(ioread32(FlashReg + MAX_BLK_ADDR_1) &
|
|
MAX_BLK_ADDR_1__VALUE);
|
|
|
|
DeviceInfo.wTotalBlocks *= totalUsedBanks;
|
|
|
|
if (DeviceInfo.wSpectraEndBlock >=
|
|
DeviceInfo.wTotalBlocks) {
|
|
DeviceInfo.wSpectraEndBlock =
|
|
DeviceInfo.wTotalBlocks - 1;
|
|
}
|
|
|
|
DeviceInfo.wDataBlockNum =
|
|
DeviceInfo.wSpectraEndBlock -
|
|
DeviceInfo.wSpectraStartBlock + 1;
|
|
} else {
|
|
DeviceInfo.wTotalBlocks *= totalUsedBanks;
|
|
DeviceInfo.wSpectraStartBlock = SPECTRA_START_BLOCK;
|
|
DeviceInfo.wSpectraEndBlock =
|
|
DeviceInfo.wTotalBlocks - 1;
|
|
DeviceInfo.wDataBlockNum =
|
|
DeviceInfo.wSpectraEndBlock -
|
|
DeviceInfo.wSpectraStartBlock + 1;
|
|
}
|
|
} else {
|
|
DeviceInfo.wTotalBlocks *= totalUsedBanks;
|
|
DeviceInfo.wSpectraStartBlock = SPECTRA_START_BLOCK;
|
|
DeviceInfo.wSpectraEndBlock = DeviceInfo.wTotalBlocks - 1;
|
|
DeviceInfo.wDataBlockNum =
|
|
DeviceInfo.wSpectraEndBlock -
|
|
DeviceInfo.wSpectraStartBlock + 1;
|
|
}
|
|
}
|
|
|
|
static void dump_device_info(void)
|
|
{
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceInfo:\n");
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
|
|
DeviceInfo.wDeviceMaker);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
|
|
DeviceInfo.wDeviceID);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
|
|
DeviceInfo.wDeviceType);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
|
|
DeviceInfo.wSpectraStartBlock);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
|
|
DeviceInfo.wSpectraEndBlock);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
|
|
DeviceInfo.wTotalBlocks);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
|
|
DeviceInfo.wPagesPerBlock);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
|
|
DeviceInfo.wPageSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
|
|
DeviceInfo.wPageDataSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
|
|
DeviceInfo.wPageSpareSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
|
|
DeviceInfo.wNumPageSpareFlag);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
|
|
DeviceInfo.wECCBytesPerSector);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
|
|
DeviceInfo.wBlockSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
|
|
DeviceInfo.wBlockDataSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
|
|
DeviceInfo.wDataBlockNum);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
|
|
DeviceInfo.bPlaneNum);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
|
|
DeviceInfo.wDeviceMainAreaSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
|
|
DeviceInfo.wDeviceSpareAreaSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
|
|
DeviceInfo.wDevicesConnected);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
|
|
DeviceInfo.wDeviceWidth);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
|
|
DeviceInfo.wHWRevision);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
|
|
DeviceInfo.wHWFeatures);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
|
|
DeviceInfo.wONFIDevFeatures);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
|
|
DeviceInfo.wONFIOptCommands);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
|
|
DeviceInfo.wONFITimingMode);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
|
|
DeviceInfo.wONFIPgmCacheTimingMode);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
|
|
DeviceInfo.MLCDevice ? "Yes" : "No");
|
|
nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
|
|
DeviceInfo.wSpareSkipBytes);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
|
|
DeviceInfo.nBitsInPageNumber);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
|
|
DeviceInfo.nBitsInPageDataSize);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
|
|
DeviceInfo.nBitsInBlockDataSize);
|
|
}
|
|
|
|
u16 NAND_Read_Device_ID(void)
|
|
{
|
|
u16 status = PASS;
|
|
u8 no_of_planes;
|
|
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
iowrite32(0x02, FlashReg + SPARE_AREA_SKIP_BYTES);
|
|
iowrite32(0xffff, FlashReg + SPARE_AREA_MARKER);
|
|
DeviceInfo.wDeviceMaker = ioread32(FlashReg + MANUFACTURER_ID);
|
|
DeviceInfo.wDeviceID = ioread32(FlashReg + DEVICE_ID);
|
|
DeviceInfo.MLCDevice = ioread32(FlashReg + DEVICE_PARAM_0) & 0x0c;
|
|
|
|
if (ioread32(FlashReg + ONFI_DEVICE_NO_OF_LUNS) &
|
|
ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
|
|
if (FAIL == get_onfi_nand_para())
|
|
return FAIL;
|
|
} else if (DeviceInfo.wDeviceMaker == 0xEC) { /* Samsung NAND */
|
|
get_samsung_nand_para();
|
|
} else if (DeviceInfo.wDeviceMaker == 0x98) { /* Toshiba NAND */
|
|
get_toshiba_nand_para();
|
|
} else if (DeviceInfo.wDeviceMaker == 0xAD) { /* Hynix NAND */
|
|
get_hynix_nand_para();
|
|
} else {
|
|
DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
|
|
}
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
|
|
"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
|
|
"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
|
|
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
|
|
ioread32(FlashReg + ACC_CLKS),
|
|
ioread32(FlashReg + RE_2_WE),
|
|
ioread32(FlashReg + WE_2_RE),
|
|
ioread32(FlashReg + ADDR_2_DATA),
|
|
ioread32(FlashReg + RDWR_EN_LO_CNT),
|
|
ioread32(FlashReg + RDWR_EN_HI_CNT),
|
|
ioread32(FlashReg + CS_SETUP_CNT));
|
|
|
|
DeviceInfo.wHWRevision = ioread32(FlashReg + REVISION);
|
|
DeviceInfo.wHWFeatures = ioread32(FlashReg + FEATURES);
|
|
|
|
DeviceInfo.wDeviceMainAreaSize =
|
|
ioread32(FlashReg + DEVICE_MAIN_AREA_SIZE);
|
|
DeviceInfo.wDeviceSpareAreaSize =
|
|
ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE);
|
|
|
|
DeviceInfo.wPageDataSize =
|
|
ioread32(FlashReg + LOGICAL_PAGE_DATA_SIZE);
|
|
|
|
/* Note: When using the Micon 4K NAND device, the controller will report
|
|
* Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
|
|
* And if force set it to 218 bytes, the controller can not work
|
|
* correctly. So just let it be. But keep in mind that this bug may
|
|
* cause
|
|
* other problems in future. - Yunpeng 2008-10-10
|
|
*/
|
|
DeviceInfo.wPageSpareSize =
|
|
ioread32(FlashReg + LOGICAL_PAGE_SPARE_SIZE);
|
|
|
|
DeviceInfo.wPagesPerBlock = ioread32(FlashReg + PAGES_PER_BLOCK);
|
|
|
|
DeviceInfo.wPageSize =
|
|
DeviceInfo.wPageDataSize + DeviceInfo.wPageSpareSize;
|
|
DeviceInfo.wBlockSize =
|
|
DeviceInfo.wPageSize * DeviceInfo.wPagesPerBlock;
|
|
DeviceInfo.wBlockDataSize =
|
|
DeviceInfo.wPagesPerBlock * DeviceInfo.wPageDataSize;
|
|
|
|
DeviceInfo.wDeviceWidth = ioread32(FlashReg + DEVICE_WIDTH);
|
|
DeviceInfo.wDeviceType =
|
|
((ioread32(FlashReg + DEVICE_WIDTH) > 0) ? 16 : 8);
|
|
|
|
DeviceInfo.wDevicesConnected = ioread32(FlashReg + DEVICES_CONNECTED);
|
|
|
|
DeviceInfo.wSpareSkipBytes =
|
|
ioread32(FlashReg + SPARE_AREA_SKIP_BYTES) *
|
|
DeviceInfo.wDevicesConnected;
|
|
|
|
DeviceInfo.nBitsInPageNumber =
|
|
(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPagesPerBlock);
|
|
DeviceInfo.nBitsInPageDataSize =
|
|
(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPageDataSize);
|
|
DeviceInfo.nBitsInBlockDataSize =
|
|
(u8)GLOB_Calc_Used_Bits(DeviceInfo.wBlockDataSize);
|
|
|
|
set_ecc_config();
|
|
|
|
no_of_planes = ioread32(FlashReg + NUMBER_OF_PLANES) &
|
|
NUMBER_OF_PLANES__VALUE;
|
|
|
|
switch (no_of_planes) {
|
|
case 0:
|
|
case 1:
|
|
case 3:
|
|
case 7:
|
|
DeviceInfo.bPlaneNum = no_of_planes + 1;
|
|
break;
|
|
default:
|
|
status = FAIL;
|
|
break;
|
|
}
|
|
|
|
find_valid_banks();
|
|
|
|
detect_partition_feature();
|
|
|
|
dump_device_info();
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_UnlockArrayAll(void)
|
|
{
|
|
u64 start_addr, end_addr;
|
|
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
start_addr = 0;
|
|
end_addr = ((u64)DeviceInfo.wBlockSize *
|
|
(DeviceInfo.wTotalBlocks - 1)) >>
|
|
DeviceInfo.nBitsInPageDataSize;
|
|
|
|
index_addr((u32)(MODE_10 | (u32)start_addr), 0x10);
|
|
index_addr((u32)(MODE_10 | (u32)end_addr), 0x11);
|
|
|
|
return PASS;
|
|
}
|
|
|
|
void NAND_LLD_Enable_Disable_Interrupts(u16 INT_ENABLE)
|
|
{
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
if (INT_ENABLE)
|
|
iowrite32(1, FlashReg + GLOBAL_INT_ENABLE);
|
|
else
|
|
iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
|
|
}
|
|
|
|
u16 NAND_Erase_Block(u32 block)
|
|
{
|
|
u16 status = PASS;
|
|
u64 flash_add;
|
|
u16 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
if (block >= DeviceInfo.wTotalBlocks)
|
|
status = FAIL;
|
|
|
|
if (status == PASS) {
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
|
|
iowrite32(INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL,
|
|
FlashReg + intr_status);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 1);
|
|
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
(INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ERASE_FAIL)
|
|
status = FAIL;
|
|
|
|
iowrite32(INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL,
|
|
FlashReg + intr_status);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static u32 Boundary_Check_Block_Page(u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
|
|
if (block >= DeviceInfo.wTotalBlocks)
|
|
status = FAIL;
|
|
|
|
if (page + page_count > DeviceInfo.wPagesPerBlock)
|
|
status = FAIL;
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Read_Page_Spare(u8 *read_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u32 i;
|
|
u64 flash_add;
|
|
u32 PageSpareSize = DeviceInfo.wPageSpareSize;
|
|
u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u8 *page_spare = buf_read_page_spare;
|
|
|
|
if (block >= DeviceInfo.wTotalBlocks) {
|
|
printk(KERN_ERR "block too big: %d\n", (int)block);
|
|
status = FAIL;
|
|
}
|
|
|
|
if (page >= DeviceInfo.wPagesPerBlock) {
|
|
printk(KERN_ERR "page too big: %d\n", page);
|
|
status = FAIL;
|
|
}
|
|
|
|
if (page_count > 1) {
|
|
printk(KERN_ERR "page count too big: %d\n", page_count);
|
|
status = FAIL;
|
|
}
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
if (status == PASS) {
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)),
|
|
0x41);
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)),
|
|
0x2000 | page_count);
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__LOAD_COMP))
|
|
;
|
|
|
|
iowrite32((u32)(MODE_01 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)),
|
|
FlashMem);
|
|
|
|
for (i = 0; i < (PageSpareSize / 4); i++)
|
|
*((u32 *)page_spare + i) =
|
|
ioread32(FlashMem + 0x10);
|
|
|
|
if (enable_ecc) {
|
|
for (i = 0; i < spareFlagBytes; i++)
|
|
read_data[i] =
|
|
page_spare[PageSpareSize -
|
|
spareFlagBytes + i];
|
|
for (i = 0; i < (PageSpareSize - spareFlagBytes); i++)
|
|
read_data[spareFlagBytes + i] =
|
|
page_spare[i];
|
|
} else {
|
|
for (i = 0; i < PageSpareSize; i++)
|
|
read_data[i] = page_spare[i];
|
|
}
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/* No use function. Should be removed later */
|
|
u16 NAND_Write_Page_Spare(u8 *write_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
printk(KERN_ERR
|
|
"Error! This function (NAND_Write_Page_Spare) should never"
|
|
" be called!\n");
|
|
return ERR;
|
|
}
|
|
|
|
/* op value: 0 - DDMA read; 1 - DDMA write */
|
|
static void ddma_trans(u8 *data, u64 flash_add,
|
|
u32 flash_bank, int op, u32 numPages)
|
|
{
|
|
u32 data_addr;
|
|
|
|
/* Map virtual address to bus address for DDMA */
|
|
data_addr = virt_to_bus(data);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)),
|
|
(u16)(2 << 12) | (op << 8) | numPages);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
((u16)(0x0FFFF & (data_addr >> 16)) << 8)),
|
|
(u16)(2 << 12) | (2 << 8) | 0);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
((u16)(0x0FFFF & data_addr) << 8)),
|
|
(u16)(2 << 12) | (3 << 8) | 0);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(1 << 16) | (0x40 << 8)),
|
|
(u16)(2 << 12) | (4 << 8) | 0);
|
|
}
|
|
|
|
/* If data in buf are all 0xff, then return 1; otherwise return 0 */
|
|
static int check_all_1(u8 *buf)
|
|
{
|
|
int i, j, cnt;
|
|
|
|
for (i = 0; i < DeviceInfo.wPageDataSize; i++) {
|
|
if (buf[i] != 0xff) {
|
|
cnt = 0;
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"the first non-0xff data byte is: %d\n", i);
|
|
for (j = i; j < DeviceInfo.wPageDataSize; j++) {
|
|
nand_dbg_print(NAND_DBG_WARN, "0x%x ", buf[j]);
|
|
cnt++;
|
|
if (cnt > 8)
|
|
break;
|
|
}
|
|
nand_dbg_print(NAND_DBG_WARN, "\n");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int do_ecc_new(unsigned long bank, u8 *buf,
|
|
u32 block, u16 page)
|
|
{
|
|
int status = PASS;
|
|
u16 err_page = 0;
|
|
u16 err_byte;
|
|
u8 err_sect;
|
|
u8 err_dev;
|
|
u16 err_fix_info;
|
|
u16 err_addr;
|
|
u32 ecc_sect_size;
|
|
u8 *err_pos;
|
|
u32 err_page_addr[4] = {ERR_PAGE_ADDR0,
|
|
ERR_PAGE_ADDR1, ERR_PAGE_ADDR2, ERR_PAGE_ADDR3};
|
|
|
|
ecc_sect_size = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
|
|
|
|
do {
|
|
err_page = ioread32(FlashReg + err_page_addr[bank]);
|
|
err_addr = ioread32(FlashReg + ECC_ERROR_ADDRESS);
|
|
err_byte = err_addr & ECC_ERROR_ADDRESS__OFFSET;
|
|
err_sect = ((err_addr & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12);
|
|
err_fix_info = ioread32(FlashReg + ERR_CORRECTION_INFO);
|
|
err_dev = ((err_fix_info & ERR_CORRECTION_INFO__DEVICE_NR)
|
|
>> 8);
|
|
if (err_fix_info & ERR_CORRECTION_INFO__ERROR_TYPE) {
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"%s, Line %d Uncorrectable ECC error "
|
|
"when read block %d page %d."
|
|
"PTN_INTR register: 0x%x "
|
|
"err_page: %d, err_sect: %d, err_byte: %d, "
|
|
"err_dev: %d, ecc_sect_size: %d, "
|
|
"err_fix_info: 0x%x\n",
|
|
__FILE__, __LINE__, block, page,
|
|
ioread32(FlashReg + PTN_INTR),
|
|
err_page, err_sect, err_byte, err_dev,
|
|
ecc_sect_size, (u32)err_fix_info);
|
|
|
|
if (check_all_1(buf))
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d"
|
|
"All 0xff!\n",
|
|
__FILE__, __LINE__);
|
|
else
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d"
|
|
"Not all 0xff!\n",
|
|
__FILE__, __LINE__);
|
|
status = FAIL;
|
|
} else {
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"%s, Line %d Found ECC error "
|
|
"when read block %d page %d."
|
|
"err_page: %d, err_sect: %d, err_byte: %d, "
|
|
"err_dev: %d, ecc_sect_size: %d, "
|
|
"err_fix_info: 0x%x\n",
|
|
__FILE__, __LINE__, block, page,
|
|
err_page, err_sect, err_byte, err_dev,
|
|
ecc_sect_size, (u32)err_fix_info);
|
|
if (err_byte < ECC_SECTOR_SIZE) {
|
|
err_pos = buf +
|
|
(err_page - page) *
|
|
DeviceInfo.wPageDataSize +
|
|
err_sect * ecc_sect_size +
|
|
err_byte *
|
|
DeviceInfo.wDevicesConnected +
|
|
err_dev;
|
|
|
|
*err_pos ^= err_fix_info &
|
|
ERR_CORRECTION_INFO__BYTEMASK;
|
|
}
|
|
}
|
|
} while (!(err_fix_info & ERR_CORRECTION_INFO__LAST_ERR_INFO));
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Read_Page_Main_Polling(u8 *read_data,
|
|
u32 block, u16 page, u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u64 flash_add;
|
|
u32 intr_status = 0;
|
|
u32 flash_bank;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u8 *read_data_l;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
if (status != PASS)
|
|
return status;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
if (page_count > 1) {
|
|
read_data_l = read_data;
|
|
while (page_count > MAX_PAGES_PER_RW) {
|
|
if (ioread32(FlashReg + MULTIPLANE_OPERATION))
|
|
status = NAND_Multiplane_Read(read_data_l,
|
|
block, page, MAX_PAGES_PER_RW);
|
|
else
|
|
status = NAND_Pipeline_Read_Ahead_Polling(
|
|
read_data_l, block, page,
|
|
MAX_PAGES_PER_RW);
|
|
|
|
if (status == FAIL)
|
|
return status;
|
|
|
|
read_data_l += DeviceInfo.wPageDataSize *
|
|
MAX_PAGES_PER_RW;
|
|
page_count -= MAX_PAGES_PER_RW;
|
|
page += MAX_PAGES_PER_RW;
|
|
}
|
|
if (ioread32(FlashReg + MULTIPLANE_OPERATION))
|
|
status = NAND_Multiplane_Read(read_data_l,
|
|
block, page, page_count);
|
|
else
|
|
status = NAND_Pipeline_Read_Ahead_Polling(
|
|
read_data_l, block, page, page_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
ddma_trans(read_data, flash_add, flash_bank, 0, 1);
|
|
|
|
if (enable_ecc) {
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
(INTR_STATUS0__ECC_TRANSACTION_DONE |
|
|
INTR_STATUS0__ECC_ERR)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
status = do_ecc_new(flash_bank, read_data,
|
|
block, page);
|
|
}
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE &
|
|
INTR_STATUS0__ECC_ERR)
|
|
iowrite32(INTR_STATUS0__ECC_TRANSACTION_DONE |
|
|
INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE)
|
|
iowrite32(INTR_STATUS0__ECC_TRANSACTION_DONE,
|
|
FlashReg + intr_status);
|
|
else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR)
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
} else {
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP))
|
|
;
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP, FlashReg + intr_status);
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Pipeline_Read_Ahead_Polling(u8 *read_data,
|
|
u32 block, u16 page, u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u32 NumPages = page_count;
|
|
u64 flash_add;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u32 ecc_done_OR_dma_comp;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
|
|
if (page_count < 2)
|
|
status = FAIL;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
*DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
if (status == PASS) {
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
ddma_trans(read_data, flash_add, flash_bank, 0, NumPages);
|
|
|
|
ecc_done_OR_dma_comp = 0;
|
|
while (1) {
|
|
if (enable_ecc) {
|
|
while (!ioread32(FlashReg + intr_status))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
status = do_ecc_new(flash_bank,
|
|
read_data, block, page);
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP) {
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
|
|
if (1 == ecc_done_OR_dma_comp)
|
|
break;
|
|
|
|
ecc_done_OR_dma_comp = 1;
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE) {
|
|
iowrite32(
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE,
|
|
FlashReg + intr_status);
|
|
|
|
if (1 == ecc_done_OR_dma_comp)
|
|
break;
|
|
|
|
ecc_done_OR_dma_comp = 1;
|
|
}
|
|
} else {
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP))
|
|
;
|
|
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
break;
|
|
}
|
|
|
|
iowrite32((~INTR_STATUS0__ECC_ERR) &
|
|
(~INTR_STATUS0__ECC_TRANSACTION_DONE) &
|
|
(~INTR_STATUS0__DMA_CMD_COMP),
|
|
FlashReg + intr_status);
|
|
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Read_Page_Main(u8 *read_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u64 flash_add;
|
|
u32 intr_status = 0;
|
|
u32 flash_bank;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
int ret;
|
|
u8 *read_data_l;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
if (status != PASS)
|
|
return status;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
if (page_count > 1) {
|
|
read_data_l = read_data;
|
|
while (page_count > MAX_PAGES_PER_RW) {
|
|
if (ioread32(FlashReg + MULTIPLANE_OPERATION))
|
|
status = NAND_Multiplane_Read(read_data_l,
|
|
block, page, MAX_PAGES_PER_RW);
|
|
else
|
|
status = NAND_Pipeline_Read_Ahead(
|
|
read_data_l, block, page,
|
|
MAX_PAGES_PER_RW);
|
|
|
|
if (status == FAIL)
|
|
return status;
|
|
|
|
read_data_l += DeviceInfo.wPageDataSize *
|
|
MAX_PAGES_PER_RW;
|
|
page_count -= MAX_PAGES_PER_RW;
|
|
page += MAX_PAGES_PER_RW;
|
|
}
|
|
if (ioread32(FlashReg + MULTIPLANE_OPERATION))
|
|
status = NAND_Multiplane_Read(read_data_l,
|
|
block, page, page_count);
|
|
else
|
|
status = NAND_Pipeline_Read_Ahead(
|
|
read_data_l, block, page, page_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
/* Fill the mrst_nand_info structure */
|
|
info.state = INT_READ_PAGE_MAIN;
|
|
info.read_data = read_data;
|
|
info.flash_bank = flash_bank;
|
|
info.block = block;
|
|
info.page = page;
|
|
info.ret = PASS;
|
|
|
|
ddma_trans(read_data, flash_add, flash_bank, 0, 1);
|
|
|
|
iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable Interrupt */
|
|
|
|
ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
|
|
if (!ret) {
|
|
printk(KERN_ERR "Wait for completion timeout "
|
|
"in %s, Line %d\n", __FILE__, __LINE__);
|
|
status = ERR;
|
|
} else {
|
|
status = info.ret;
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
return status;
|
|
}
|
|
|
|
void Conv_Spare_Data_Log2Phy_Format(u8 *data)
|
|
{
|
|
int i;
|
|
const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
const u32 PageSpareSize = DeviceInfo.wPageSpareSize;
|
|
|
|
if (enable_ecc) {
|
|
for (i = spareFlagBytes - 1; i >= 0; i++)
|
|
data[PageSpareSize - spareFlagBytes + i] = data[i];
|
|
}
|
|
}
|
|
|
|
void Conv_Spare_Data_Phy2Log_Format(u8 *data)
|
|
{
|
|
int i;
|
|
const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
const u32 PageSpareSize = DeviceInfo.wPageSpareSize;
|
|
|
|
if (enable_ecc) {
|
|
for (i = 0; i < spareFlagBytes; i++)
|
|
data[i] = data[PageSpareSize - spareFlagBytes + i];
|
|
}
|
|
}
|
|
|
|
|
|
void Conv_Main_Spare_Data_Log2Phy_Format(u8 *data, u16 page_count)
|
|
{
|
|
const u32 PageSize = DeviceInfo.wPageSize;
|
|
const u32 PageDataSize = DeviceInfo.wPageDataSize;
|
|
const u32 eccBytes = DeviceInfo.wECCBytesPerSector;
|
|
const u32 spareSkipBytes = DeviceInfo.wSpareSkipBytes;
|
|
const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
u32 eccSectorSize;
|
|
u32 page_offset;
|
|
int i, j;
|
|
|
|
eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
|
|
if (enable_ecc) {
|
|
while (page_count > 0) {
|
|
page_offset = (page_count - 1) * PageSize;
|
|
j = (DeviceInfo.wPageDataSize / eccSectorSize);
|
|
for (i = spareFlagBytes - 1; i >= 0; i--)
|
|
data[page_offset +
|
|
(eccSectorSize + eccBytes) * j + i] =
|
|
data[page_offset + PageDataSize + i];
|
|
for (j--; j >= 1; j--) {
|
|
for (i = eccSectorSize - 1; i >= 0; i--)
|
|
data[page_offset +
|
|
(eccSectorSize + eccBytes) * j + i] =
|
|
data[page_offset +
|
|
eccSectorSize * j + i];
|
|
}
|
|
for (i = (PageSize - spareSkipBytes) - 1;
|
|
i >= PageDataSize; i--)
|
|
data[page_offset + i + spareSkipBytes] =
|
|
data[page_offset + i];
|
|
page_count--;
|
|
}
|
|
}
|
|
}
|
|
|
|
void Conv_Main_Spare_Data_Phy2Log_Format(u8 *data, u16 page_count)
|
|
{
|
|
const u32 PageSize = DeviceInfo.wPageSize;
|
|
const u32 PageDataSize = DeviceInfo.wPageDataSize;
|
|
const u32 eccBytes = DeviceInfo.wECCBytesPerSector;
|
|
const u32 spareSkipBytes = DeviceInfo.wSpareSkipBytes;
|
|
const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
u32 eccSectorSize;
|
|
u32 page_offset;
|
|
int i, j;
|
|
|
|
eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
|
|
if (enable_ecc) {
|
|
while (page_count > 0) {
|
|
page_offset = (page_count - 1) * PageSize;
|
|
for (i = PageDataSize;
|
|
i < PageSize - spareSkipBytes;
|
|
i++)
|
|
data[page_offset + i] =
|
|
data[page_offset + i +
|
|
spareSkipBytes];
|
|
for (j = 1;
|
|
j < DeviceInfo.wPageDataSize / eccSectorSize;
|
|
j++) {
|
|
for (i = 0; i < eccSectorSize; i++)
|
|
data[page_offset +
|
|
eccSectorSize * j + i] =
|
|
data[page_offset +
|
|
(eccSectorSize + eccBytes) * j
|
|
+ i];
|
|
}
|
|
for (i = 0; i < spareFlagBytes; i++)
|
|
data[page_offset + PageDataSize + i] =
|
|
data[page_offset +
|
|
(eccSectorSize + eccBytes) * j + i];
|
|
page_count--;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Un-tested function */
|
|
u16 NAND_Multiplane_Read(u8 *read_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u32 NumPages = page_count;
|
|
u64 flash_add;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u32 ecc_done_OR_dma_comp;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
if (status == PASS) {
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
iowrite32(0x01, FlashReg + MULTIPLANE_OPERATION);
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
ddma_trans(read_data, flash_add, flash_bank, 0, NumPages);
|
|
|
|
ecc_done_OR_dma_comp = 0;
|
|
while (1) {
|
|
if (enable_ecc) {
|
|
while (!ioread32(FlashReg + intr_status))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
status = do_ecc_new(flash_bank,
|
|
read_data, block, page);
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP) {
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
|
|
if (1 == ecc_done_OR_dma_comp)
|
|
break;
|
|
|
|
ecc_done_OR_dma_comp = 1;
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE) {
|
|
iowrite32(
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE,
|
|
FlashReg + intr_status);
|
|
|
|
if (1 == ecc_done_OR_dma_comp)
|
|
break;
|
|
|
|
ecc_done_OR_dma_comp = 1;
|
|
}
|
|
} else {
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP))
|
|
;
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
break;
|
|
}
|
|
|
|
iowrite32((~INTR_STATUS0__ECC_ERR) &
|
|
(~INTR_STATUS0__ECC_TRANSACTION_DONE) &
|
|
(~INTR_STATUS0__DMA_CMD_COMP),
|
|
FlashReg + intr_status);
|
|
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + MULTIPLANE_OPERATION);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Pipeline_Read_Ahead(u8 *read_data, u32 block,
|
|
u16 page, u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u32 NumPages = page_count;
|
|
u64 flash_add;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
int ret;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
|
|
if (page_count < 2)
|
|
status = FAIL;
|
|
|
|
if (status != PASS)
|
|
return status;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
*DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
/* Fill the mrst_nand_info structure */
|
|
info.state = INT_PIPELINE_READ_AHEAD;
|
|
info.read_data = read_data;
|
|
info.flash_bank = flash_bank;
|
|
info.block = block;
|
|
info.page = page;
|
|
info.ret = PASS;
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
|
|
ddma_trans(read_data, flash_add, flash_bank, 0, NumPages);
|
|
|
|
iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable Interrupt */
|
|
|
|
ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
|
|
if (!ret) {
|
|
printk(KERN_ERR "Wait for completion timeout "
|
|
"in %s, Line %d\n", __FILE__, __LINE__);
|
|
status = ERR;
|
|
} else {
|
|
status = info.ret;
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
u16 NAND_Write_Page_Main(u8 *write_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u64 flash_add;
|
|
u32 intr_status = 0;
|
|
u32 flash_bank;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
int ret;
|
|
u8 *write_data_l;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
if (status != PASS)
|
|
return status;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
iowrite32(INTR_STATUS0__PROGRAM_COMP |
|
|
INTR_STATUS0__PROGRAM_FAIL, FlashReg + intr_status);
|
|
|
|
if (page_count > 1) {
|
|
write_data_l = write_data;
|
|
while (page_count > MAX_PAGES_PER_RW) {
|
|
if (ioread32(FlashReg + MULTIPLANE_OPERATION))
|
|
status = NAND_Multiplane_Write(write_data_l,
|
|
block, page, MAX_PAGES_PER_RW);
|
|
else
|
|
status = NAND_Pipeline_Write_Ahead(
|
|
write_data_l, block, page,
|
|
MAX_PAGES_PER_RW);
|
|
if (status == FAIL)
|
|
return status;
|
|
|
|
write_data_l += DeviceInfo.wPageDataSize *
|
|
MAX_PAGES_PER_RW;
|
|
page_count -= MAX_PAGES_PER_RW;
|
|
page += MAX_PAGES_PER_RW;
|
|
}
|
|
if (ioread32(FlashReg + MULTIPLANE_OPERATION))
|
|
status = NAND_Multiplane_Write(write_data_l,
|
|
block, page, page_count);
|
|
else
|
|
status = NAND_Pipeline_Write_Ahead(write_data_l,
|
|
block, page, page_count);
|
|
|
|
return status;
|
|
}
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
/* Fill the mrst_nand_info structure */
|
|
info.state = INT_WRITE_PAGE_MAIN;
|
|
info.write_data = write_data;
|
|
info.flash_bank = flash_bank;
|
|
info.block = block;
|
|
info.page = page;
|
|
info.ret = PASS;
|
|
|
|
ddma_trans(write_data, flash_add, flash_bank, 1, 1);
|
|
|
|
iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable interrupt */
|
|
|
|
ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
|
|
if (!ret) {
|
|
printk(KERN_ERR "Wait for completion timeout "
|
|
"in %s, Line %d\n", __FILE__, __LINE__);
|
|
status = ERR;
|
|
} else {
|
|
status = info.ret;
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
while (ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG)
|
|
;
|
|
|
|
return status;
|
|
}
|
|
|
|
void NAND_ECC_Ctrl(int enable)
|
|
{
|
|
if (enable) {
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Will enable ECC in %s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
iowrite32(1, FlashReg + ECC_ENABLE);
|
|
enable_ecc = 1;
|
|
} else {
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Will disable ECC in %s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
iowrite32(0, FlashReg + ECC_ENABLE);
|
|
enable_ecc = 0;
|
|
}
|
|
}
|
|
|
|
u16 NAND_Write_Page_Main_Spare(u8 *write_data, u32 block,
|
|
u16 page, u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u32 i, j, page_num = 0;
|
|
u32 PageSize = DeviceInfo.wPageSize;
|
|
u32 PageDataSize = DeviceInfo.wPageDataSize;
|
|
u32 eccBytes = DeviceInfo.wECCBytesPerSector;
|
|
u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
u32 spareSkipBytes = DeviceInfo.wSpareSkipBytes;
|
|
u64 flash_add;
|
|
u32 eccSectorSize;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u8 *page_main_spare = buf_write_page_main_spare;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
if (status == PASS) {
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
|
|
iowrite32(1, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
while ((status != FAIL) && (page_count > 0)) {
|
|
flash_add = (u64)(block %
|
|
(DeviceInfo.wTotalBlocks / totalUsedBanks)) *
|
|
DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
iowrite32((u32)(MODE_01 | (flash_bank << 24) |
|
|
(flash_add >>
|
|
DeviceInfo.nBitsInPageDataSize)),
|
|
FlashMem);
|
|
|
|
if (enable_ecc) {
|
|
for (j = 0;
|
|
j <
|
|
DeviceInfo.wPageDataSize / eccSectorSize;
|
|
j++) {
|
|
for (i = 0; i < eccSectorSize; i++)
|
|
page_main_spare[(eccSectorSize +
|
|
eccBytes) * j +
|
|
i] =
|
|
write_data[eccSectorSize *
|
|
j + i];
|
|
|
|
for (i = 0; i < eccBytes; i++)
|
|
page_main_spare[(eccSectorSize +
|
|
eccBytes) * j +
|
|
eccSectorSize +
|
|
i] =
|
|
write_data[PageDataSize +
|
|
spareFlagBytes +
|
|
eccBytes * j +
|
|
i];
|
|
}
|
|
|
|
for (i = 0; i < spareFlagBytes; i++)
|
|
page_main_spare[(eccSectorSize +
|
|
eccBytes) * j + i] =
|
|
write_data[PageDataSize + i];
|
|
|
|
for (i = PageSize - 1; i >= PageDataSize +
|
|
spareSkipBytes; i--)
|
|
page_main_spare[i] = page_main_spare[i -
|
|
spareSkipBytes];
|
|
|
|
for (i = PageDataSize; i < PageDataSize +
|
|
spareSkipBytes; i++)
|
|
page_main_spare[i] = 0xff;
|
|
|
|
for (i = 0; i < PageSize / 4; i++)
|
|
iowrite32(
|
|
*((u32 *)page_main_spare + i),
|
|
FlashMem + 0x10);
|
|
} else {
|
|
|
|
for (i = 0; i < PageSize / 4; i++)
|
|
iowrite32(*((u32 *)write_data + i),
|
|
FlashMem + 0x10);
|
|
}
|
|
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
(INTR_STATUS0__PROGRAM_COMP |
|
|
INTR_STATUS0__PROGRAM_FAIL)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__PROGRAM_FAIL)
|
|
status = FAIL;
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
page_num++;
|
|
page_count--;
|
|
write_data += PageSize;
|
|
}
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Read_Page_Main_Spare(u8 *read_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u32 status = PASS;
|
|
u32 i, j;
|
|
u64 flash_add = 0;
|
|
u32 PageSize = DeviceInfo.wPageSize;
|
|
u32 PageDataSize = DeviceInfo.wPageDataSize;
|
|
u32 PageSpareSize = DeviceInfo.wPageSpareSize;
|
|
u32 eccBytes = DeviceInfo.wECCBytesPerSector;
|
|
u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
|
|
u32 spareSkipBytes = DeviceInfo.wSpareSkipBytes;
|
|
u32 eccSectorSize;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u8 *read_data_l = read_data;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u8 *page_main_spare = buf_read_page_main_spare;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
if (status == PASS) {
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
|
|
iowrite32(1, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status),
|
|
FlashReg + intr_status);
|
|
|
|
while ((status != FAIL) && (page_count > 0)) {
|
|
flash_add = (u64)(block %
|
|
(DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)),
|
|
0x43);
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)),
|
|
0x2000 | page_count);
|
|
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__LOAD_COMP))
|
|
;
|
|
|
|
iowrite32((u32)(MODE_01 | (flash_bank << 24) |
|
|
(flash_add >>
|
|
DeviceInfo.nBitsInPageDataSize)),
|
|
FlashMem);
|
|
|
|
for (i = 0; i < PageSize / 4; i++)
|
|
*(((u32 *)page_main_spare) + i) =
|
|
ioread32(FlashMem + 0x10);
|
|
|
|
if (enable_ecc) {
|
|
for (i = PageDataSize; i < PageSize -
|
|
spareSkipBytes; i++)
|
|
page_main_spare[i] = page_main_spare[i +
|
|
spareSkipBytes];
|
|
|
|
for (j = 0;
|
|
j < DeviceInfo.wPageDataSize / eccSectorSize;
|
|
j++) {
|
|
|
|
for (i = 0; i < eccSectorSize; i++)
|
|
read_data_l[eccSectorSize * j +
|
|
i] =
|
|
page_main_spare[
|
|
(eccSectorSize +
|
|
eccBytes) * j + i];
|
|
|
|
for (i = 0; i < eccBytes; i++)
|
|
read_data_l[PageDataSize +
|
|
spareFlagBytes +
|
|
eccBytes * j + i] =
|
|
page_main_spare[
|
|
(eccSectorSize +
|
|
eccBytes) * j +
|
|
eccSectorSize + i];
|
|
}
|
|
|
|
for (i = 0; i < spareFlagBytes; i++)
|
|
read_data_l[PageDataSize + i] =
|
|
page_main_spare[(eccSectorSize +
|
|
eccBytes) * j + i];
|
|
} else {
|
|
for (i = 0; i < (PageDataSize + PageSpareSize);
|
|
i++)
|
|
read_data_l[i] = page_main_spare[i];
|
|
|
|
}
|
|
|
|
if (enable_ecc) {
|
|
while (!(ioread32(FlashReg + intr_status) &
|
|
(INTR_STATUS0__ECC_TRANSACTION_DONE |
|
|
INTR_STATUS0__ECC_ERR)))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
status = do_ecc_new(flash_bank,
|
|
read_data, block, page);
|
|
}
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR |
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE,
|
|
FlashReg + intr_status);
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE) {
|
|
iowrite32(
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE,
|
|
FlashReg + intr_status);
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
}
|
|
}
|
|
|
|
page++;
|
|
page_count--;
|
|
read_data_l += PageSize;
|
|
}
|
|
}
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
|
|
return status;
|
|
}
|
|
|
|
u16 NAND_Pipeline_Write_Ahead(u8 *write_data, u32 block,
|
|
u16 page, u16 page_count)
|
|
{
|
|
u16 status = PASS;
|
|
u32 NumPages = page_count;
|
|
u64 flash_add;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
int ret;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
|
|
if (page_count < 2)
|
|
status = FAIL;
|
|
|
|
if (status != PASS)
|
|
return status;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
/* Fill the mrst_nand_info structure */
|
|
info.state = INT_PIPELINE_WRITE_AHEAD;
|
|
info.write_data = write_data;
|
|
info.flash_bank = flash_bank;
|
|
info.block = block;
|
|
info.page = page;
|
|
info.ret = PASS;
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
|
|
ddma_trans(write_data, flash_add, flash_bank, 1, NumPages);
|
|
|
|
iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable interrupt */
|
|
|
|
ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
|
|
if (!ret) {
|
|
printk(KERN_ERR "Wait for completion timeout "
|
|
"in %s, Line %d\n", __FILE__, __LINE__);
|
|
status = ERR;
|
|
} else {
|
|
status = info.ret;
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
return status;
|
|
}
|
|
|
|
/* Un-tested function */
|
|
u16 NAND_Multiplane_Write(u8 *write_data, u32 block, u16 page,
|
|
u16 page_count)
|
|
{
|
|
u16 status = PASS;
|
|
u32 NumPages = page_count;
|
|
u64 flash_add;
|
|
u32 flash_bank;
|
|
u32 intr_status = 0;
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u16 status2 = PASS;
|
|
u32 t;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
status = Boundary_Check_Block_Page(block, page, page_count);
|
|
if (status != PASS)
|
|
return status;
|
|
|
|
flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
|
|
* DeviceInfo.wBlockDataSize +
|
|
(u64)page * DeviceInfo.wPageDataSize;
|
|
|
|
flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
|
|
|
|
intr_status = intr_status_addresses[flash_bank];
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
iowrite32(0x01, FlashReg + MULTIPLANE_OPERATION);
|
|
|
|
iowrite32(1, FlashReg + DMA_ENABLE);
|
|
while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
|
|
|
|
index_addr((u32)(MODE_10 | (flash_bank << 24) |
|
|
(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
|
|
|
|
ddma_trans(write_data, flash_add, flash_bank, 1, NumPages);
|
|
|
|
while (1) {
|
|
while (!ioread32(FlashReg + intr_status))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP) {
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
status = PASS;
|
|
if (status2 == FAIL)
|
|
status = FAIL;
|
|
break;
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__PROGRAM_FAIL) {
|
|
status2 = FAIL;
|
|
status = FAIL;
|
|
t = ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__PROGRAM_FAIL;
|
|
iowrite32(t, FlashReg + intr_status);
|
|
} else {
|
|
iowrite32((~INTR_STATUS0__PROGRAM_FAIL) &
|
|
(~INTR_STATUS0__DMA_CMD_COMP),
|
|
FlashReg + intr_status);
|
|
}
|
|
}
|
|
|
|
iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
|
|
|
|
iowrite32(0, FlashReg + DMA_ENABLE);
|
|
|
|
while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
|
|
;
|
|
|
|
iowrite32(0, FlashReg + MULTIPLANE_OPERATION);
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
#if CMD_DMA
|
|
static irqreturn_t cdma_isr(int irq, void *dev_id)
|
|
{
|
|
struct mrst_nand_info *dev = dev_id;
|
|
int first_failed_cmd;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
if (!is_cdma_interrupt())
|
|
return IRQ_NONE;
|
|
|
|
/* Disable controller interrupts */
|
|
iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
|
|
GLOB_FTL_Event_Status(&first_failed_cmd);
|
|
complete(&dev->complete);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
#else
|
|
static void handle_nand_int_read(struct mrst_nand_info *dev)
|
|
{
|
|
u32 intr_status_addresses[4] = {INTR_STATUS0,
|
|
INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
|
|
u32 intr_status;
|
|
u32 ecc_done_OR_dma_comp = 0;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
dev->ret = PASS;
|
|
intr_status = intr_status_addresses[dev->flash_bank];
|
|
|
|
while (1) {
|
|
if (enable_ecc) {
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_ERR) {
|
|
iowrite32(INTR_STATUS0__ECC_ERR,
|
|
FlashReg + intr_status);
|
|
dev->ret = do_ecc_new(dev->flash_bank,
|
|
dev->read_data,
|
|
dev->block, dev->page);
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP) {
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
if (1 == ecc_done_OR_dma_comp)
|
|
break;
|
|
ecc_done_OR_dma_comp = 1;
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE) {
|
|
iowrite32(INTR_STATUS0__ECC_TRANSACTION_DONE,
|
|
FlashReg + intr_status);
|
|
if (1 == ecc_done_OR_dma_comp)
|
|
break;
|
|
ecc_done_OR_dma_comp = 1;
|
|
}
|
|
} else {
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP) {
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
break;
|
|
} else {
|
|
printk(KERN_ERR "Illegal INTS "
|
|
"(offset addr 0x%x) value: 0x%x\n",
|
|
intr_status,
|
|
ioread32(FlashReg + intr_status));
|
|
}
|
|
}
|
|
|
|
iowrite32((~INTR_STATUS0__ECC_ERR) &
|
|
(~INTR_STATUS0__ECC_TRANSACTION_DONE) &
|
|
(~INTR_STATUS0__DMA_CMD_COMP),
|
|
FlashReg + intr_status);
|
|
}
|
|
}
|
|
|
|
static void handle_nand_int_write(struct mrst_nand_info *dev)
|
|
{
|
|
u32 intr_status;
|
|
u32 intr[4] = {INTR_STATUS0, INTR_STATUS1,
|
|
INTR_STATUS2, INTR_STATUS3};
|
|
int status = PASS;
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
dev->ret = PASS;
|
|
intr_status = intr[dev->flash_bank];
|
|
|
|
while (1) {
|
|
while (!ioread32(FlashReg + intr_status))
|
|
;
|
|
|
|
if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__DMA_CMD_COMP) {
|
|
iowrite32(INTR_STATUS0__DMA_CMD_COMP,
|
|
FlashReg + intr_status);
|
|
if (FAIL == status)
|
|
dev->ret = FAIL;
|
|
break;
|
|
} else if (ioread32(FlashReg + intr_status) &
|
|
INTR_STATUS0__PROGRAM_FAIL) {
|
|
status = FAIL;
|
|
iowrite32(INTR_STATUS0__PROGRAM_FAIL,
|
|
FlashReg + intr_status);
|
|
} else {
|
|
iowrite32((~INTR_STATUS0__PROGRAM_FAIL) &
|
|
(~INTR_STATUS0__DMA_CMD_COMP),
|
|
FlashReg + intr_status);
|
|
}
|
|
}
|
|
}
|
|
|
|
static irqreturn_t ddma_isr(int irq, void *dev_id)
|
|
{
|
|
struct mrst_nand_info *dev = dev_id;
|
|
u32 int_mask, ints0, ints1, ints2, ints3, ints_offset;
|
|
u32 intr[4] = {INTR_STATUS0, INTR_STATUS1,
|
|
INTR_STATUS2, INTR_STATUS3};
|
|
|
|
int_mask = INTR_STATUS0__DMA_CMD_COMP |
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE |
|
|
INTR_STATUS0__ECC_ERR |
|
|
INTR_STATUS0__PROGRAM_FAIL |
|
|
INTR_STATUS0__ERASE_FAIL;
|
|
|
|
ints0 = ioread32(FlashReg + INTR_STATUS0);
|
|
ints1 = ioread32(FlashReg + INTR_STATUS1);
|
|
ints2 = ioread32(FlashReg + INTR_STATUS2);
|
|
ints3 = ioread32(FlashReg + INTR_STATUS3);
|
|
|
|
ints_offset = intr[dev->flash_bank];
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG,
|
|
"INTR0: 0x%x, INTR1: 0x%x, INTR2: 0x%x, INTR3: 0x%x, "
|
|
"DMA_INTR: 0x%x, "
|
|
"dev->state: 0x%x, dev->flash_bank: %d\n",
|
|
ints0, ints1, ints2, ints3,
|
|
ioread32(FlashReg + DMA_INTR),
|
|
dev->state, dev->flash_bank);
|
|
|
|
if (!(ioread32(FlashReg + ints_offset) & int_mask)) {
|
|
iowrite32(ints0, FlashReg + INTR_STATUS0);
|
|
iowrite32(ints1, FlashReg + INTR_STATUS1);
|
|
iowrite32(ints2, FlashReg + INTR_STATUS2);
|
|
iowrite32(ints3, FlashReg + INTR_STATUS3);
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"ddma_isr: Invalid interrupt for NAND controller. "
|
|
"Ignore it\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
switch (dev->state) {
|
|
case INT_READ_PAGE_MAIN:
|
|
case INT_PIPELINE_READ_AHEAD:
|
|
/* Disable controller interrupts */
|
|
iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
|
|
handle_nand_int_read(dev);
|
|
break;
|
|
case INT_WRITE_PAGE_MAIN:
|
|
case INT_PIPELINE_WRITE_AHEAD:
|
|
iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
|
|
handle_nand_int_write(dev);
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "ddma_isr - Illegal state: 0x%x\n",
|
|
dev->state);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
dev->state = INT_IDLE_STATE;
|
|
complete(&dev->complete);
|
|
return IRQ_HANDLED;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id nand_pci_ids[] = {
|
|
{
|
|
.vendor = 0x8086,
|
|
.device = 0x0809,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{ /* end: all zeroes */ }
|
|
};
|
|
|
|
static int nand_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
int ret = -ENODEV;
|
|
unsigned long csr_base;
|
|
unsigned long csr_len;
|
|
struct mrst_nand_info *pndev = &info;
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
ret = pci_enable_device(dev);
|
|
if (ret) {
|
|
printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
pci_set_master(dev);
|
|
pndev->dev = dev;
|
|
|
|
csr_base = pci_resource_start(dev, 0);
|
|
if (!csr_base) {
|
|
printk(KERN_ERR "Spectra: pci_resource_start failed!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
csr_len = pci_resource_len(dev, 0);
|
|
if (!csr_len) {
|
|
printk(KERN_ERR "Spectra: pci_resource_len failed!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = pci_request_regions(dev, SPECTRA_NAND_NAME);
|
|
if (ret) {
|
|
printk(KERN_ERR "Spectra: Unable to request "
|
|
"memory region\n");
|
|
goto failed_req_csr;
|
|
}
|
|
|
|
pndev->ioaddr = ioremap_nocache(csr_base, csr_len);
|
|
if (!pndev->ioaddr) {
|
|
printk(KERN_ERR "Spectra: Unable to remap memory region\n");
|
|
ret = -ENOMEM;
|
|
goto failed_remap_csr;
|
|
}
|
|
nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08lx -> 0x%p (0x%lx)\n",
|
|
csr_base, pndev->ioaddr, csr_len);
|
|
|
|
init_completion(&pndev->complete);
|
|
nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
|
|
|
|
#if CMD_DMA
|
|
if (request_irq(dev->irq, cdma_isr, IRQF_SHARED,
|
|
SPECTRA_NAND_NAME, &info)) {
|
|
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
|
|
ret = -ENODEV;
|
|
iounmap(pndev->ioaddr);
|
|
goto failed_remap_csr;
|
|
}
|
|
#else
|
|
if (request_irq(dev->irq, ddma_isr, IRQF_SHARED,
|
|
SPECTRA_NAND_NAME, &info)) {
|
|
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
|
|
ret = -ENODEV;
|
|
iounmap(pndev->ioaddr);
|
|
goto failed_remap_csr;
|
|
}
|
|
#endif
|
|
|
|
pci_set_drvdata(dev, pndev);
|
|
|
|
return 0;
|
|
|
|
failed_remap_csr:
|
|
pci_release_regions(dev);
|
|
failed_req_csr:
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void nand_pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct mrst_nand_info *pndev = pci_get_drvdata(dev);
|
|
|
|
nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
#if CMD_DMA
|
|
free_irq(dev->irq, pndev);
|
|
#endif
|
|
iounmap(pndev->ioaddr);
|
|
pci_release_regions(dev);
|
|
pci_disable_device(dev);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(pci, nand_pci_ids);
|
|
|
|
static struct pci_driver nand_pci_driver = {
|
|
.name = SPECTRA_NAND_NAME,
|
|
.id_table = nand_pci_ids,
|
|
.probe = nand_pci_probe,
|
|
.remove = nand_pci_remove,
|
|
};
|
|
|
|
int NAND_Flash_Init(void)
|
|
{
|
|
int retval;
|
|
u32 int_mask;
|
|
|
|
nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
|
|
__FILE__, __LINE__, __func__);
|
|
|
|
FlashReg = ioremap_nocache(GLOB_HWCTL_REG_BASE,
|
|
GLOB_HWCTL_REG_SIZE);
|
|
if (!FlashReg) {
|
|
printk(KERN_ERR "Spectra: ioremap_nocache failed!");
|
|
return -ENOMEM;
|
|
}
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Spectra: Remapped reg base address: "
|
|
"0x%p, len: %d\n",
|
|
FlashReg, GLOB_HWCTL_REG_SIZE);
|
|
|
|
FlashMem = ioremap_nocache(GLOB_HWCTL_MEM_BASE,
|
|
GLOB_HWCTL_MEM_SIZE);
|
|
if (!FlashMem) {
|
|
printk(KERN_ERR "Spectra: ioremap_nocache failed!");
|
|
iounmap(FlashReg);
|
|
return -ENOMEM;
|
|
}
|
|
nand_dbg_print(NAND_DBG_WARN,
|
|
"Spectra: Remapped flash base address: "
|
|
"0x%p, len: %d\n",
|
|
(void *)FlashMem, GLOB_HWCTL_MEM_SIZE);
|
|
|
|
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
|
|
"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
|
|
"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
|
|
"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
|
|
ioread32(FlashReg + ACC_CLKS),
|
|
ioread32(FlashReg + RE_2_WE),
|
|
ioread32(FlashReg + WE_2_RE),
|
|
ioread32(FlashReg + ADDR_2_DATA),
|
|
ioread32(FlashReg + RDWR_EN_LO_CNT),
|
|
ioread32(FlashReg + RDWR_EN_HI_CNT),
|
|
ioread32(FlashReg + CS_SETUP_CNT));
|
|
|
|
NAND_Flash_Reset();
|
|
|
|
iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
|
|
|
|
#if CMD_DMA
|
|
info.pcmds_num = 0;
|
|
info.flash_bank = 0;
|
|
info.cdma_num = 0;
|
|
int_mask = (DMA_INTR__DESC_COMP_CHANNEL0 |
|
|
DMA_INTR__DESC_COMP_CHANNEL1 |
|
|
DMA_INTR__DESC_COMP_CHANNEL2 |
|
|
DMA_INTR__DESC_COMP_CHANNEL3 |
|
|
DMA_INTR__MEMCOPY_DESC_COMP);
|
|
iowrite32(int_mask, FlashReg + DMA_INTR_EN);
|
|
iowrite32(0xFFFF, FlashReg + DMA_INTR);
|
|
|
|
int_mask = (INTR_STATUS0__ECC_ERR |
|
|
INTR_STATUS0__PROGRAM_FAIL |
|
|
INTR_STATUS0__ERASE_FAIL);
|
|
#else
|
|
int_mask = INTR_STATUS0__DMA_CMD_COMP |
|
|
INTR_STATUS0__ECC_TRANSACTION_DONE |
|
|
INTR_STATUS0__ECC_ERR |
|
|
INTR_STATUS0__PROGRAM_FAIL |
|
|
INTR_STATUS0__ERASE_FAIL;
|
|
#endif
|
|
iowrite32(int_mask, FlashReg + INTR_EN0);
|
|
iowrite32(int_mask, FlashReg + INTR_EN1);
|
|
iowrite32(int_mask, FlashReg + INTR_EN2);
|
|
iowrite32(int_mask, FlashReg + INTR_EN3);
|
|
|
|
/* Clear all status bits */
|
|
iowrite32(0xFFFF, FlashReg + INTR_STATUS0);
|
|
iowrite32(0xFFFF, FlashReg + INTR_STATUS1);
|
|
iowrite32(0xFFFF, FlashReg + INTR_STATUS2);
|
|
iowrite32(0xFFFF, FlashReg + INTR_STATUS3);
|
|
|
|
iowrite32(0x0F, FlashReg + RB_PIN_ENABLED);
|
|
iowrite32(CHIP_EN_DONT_CARE__FLAG, FlashReg + CHIP_ENABLE_DONT_CARE);
|
|
|
|
/* Should set value for these registers when init */
|
|
iowrite32(0, FlashReg + TWO_ROW_ADDR_CYCLES);
|
|
iowrite32(1, FlashReg + ECC_ENABLE);
|
|
enable_ecc = 1;
|
|
|
|
retval = pci_register_driver(&nand_pci_driver);
|
|
if (retval)
|
|
return -ENOMEM;
|
|
|
|
return PASS;
|
|
}
|
|
|
|
/* Free memory */
|
|
int nand_release_spectra(void)
|
|
{
|
|
pci_unregister_driver(&nand_pci_driver);
|
|
iounmap(FlashMem);
|
|
iounmap(FlashReg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|