![Alan Cox](/assets/img/avatar_default.png)
Versus upstream as requested Last of the trivial switches to cable_detect methods. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
1121 lines
32 KiB
C
1121 lines
32 KiB
C
/*
|
|
* ata_piix.c - Intel PATA/SATA controllers
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
*
|
|
* Copyright 2003-2005 Red Hat Inc
|
|
* Copyright 2003-2005 Jeff Garzik
|
|
*
|
|
*
|
|
* Copyright header from piix.c:
|
|
*
|
|
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware documentation available at http://developer.intel.com/
|
|
*
|
|
* Documentation
|
|
* Publically available from Intel web site. Errata documentation
|
|
* is also publically available. As an aide to anyone hacking on this
|
|
* driver the list of errata that are relevant is below, going back to
|
|
* PIIX4. Older device documentation is now a bit tricky to find.
|
|
*
|
|
* The chipsets all follow very much the same design. The orginal Triton
|
|
* series chipsets do _not_ support independant device timings, but this
|
|
* is fixed in Triton II. With the odd mobile exception the chips then
|
|
* change little except in gaining more modes until SATA arrives. This
|
|
* driver supports only the chips with independant timing (that is those
|
|
* with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
|
|
* for the early chip drivers.
|
|
*
|
|
* Errata of note:
|
|
*
|
|
* Unfixable
|
|
* PIIX4 errata #9 - Only on ultra obscure hw
|
|
* ICH3 errata #13 - Not observed to affect real hw
|
|
* by Intel
|
|
*
|
|
* Things we must deal with
|
|
* PIIX4 errata #10 - BM IDE hang with non UDMA
|
|
* (must stop/start dma to recover)
|
|
* 440MX errata #15 - As PIIX4 errata #10
|
|
* PIIX4 errata #15 - Must not read control registers
|
|
* during a PIO transfer
|
|
* 440MX errata #13 - As PIIX4 errata #15
|
|
* ICH2 errata #21 - DMA mode 0 doesn't work right
|
|
* ICH0/1 errata #55 - As ICH2 errata #21
|
|
* ICH2 spec c #9 - Extra operations needed to handle
|
|
* drive hotswap [NOT YET SUPPORTED]
|
|
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
|
|
* and must be dword aligned
|
|
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
|
|
*
|
|
* Should have been BIOS fixed:
|
|
* 450NX: errata #19 - DMA hangs on old 450NX
|
|
* 450NX: errata #20 - DMA hangs on old 450NX
|
|
* 450NX: errata #25 - Corruption with DMA on old 450NX
|
|
* ICH3 errata #15 - IDE deadlock under high load
|
|
* (BIOS must set dev 31 fn 0 bit 23)
|
|
* ICH3 errata #18 - Don't use native mode
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "ata_piix"
|
|
#define DRV_VERSION "2.11"
|
|
|
|
enum {
|
|
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
|
|
ICH5_PMR = 0x90, /* port mapping register */
|
|
ICH5_PCS = 0x92, /* port control and status */
|
|
PIIX_SCC = 0x0A, /* sub-class code register */
|
|
|
|
PIIX_FLAG_SCR = (1 << 26), /* SCR available */
|
|
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
|
|
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
|
|
|
|
PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
|
|
PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
|
|
|
|
/* combined mode. if set, PATA is channel 0.
|
|
* if clear, PATA is channel 1.
|
|
*/
|
|
PIIX_PORT_ENABLED = (1 << 0),
|
|
PIIX_PORT_PRESENT = (1 << 4),
|
|
|
|
PIIX_80C_PRI = (1 << 5) | (1 << 4),
|
|
PIIX_80C_SEC = (1 << 7) | (1 << 6),
|
|
|
|
/* controller IDs */
|
|
piix_pata_33 = 0, /* PIIX4 at 33Mhz */
|
|
ich_pata_33 = 1, /* ICH up to UDMA 33 only */
|
|
ich_pata_66 = 2, /* ICH up to 66 Mhz */
|
|
ich_pata_100 = 3, /* ICH up to UDMA 100 */
|
|
ich_pata_133 = 4, /* ICH up to UDMA 133 */
|
|
ich5_sata = 5,
|
|
ich6_sata = 6,
|
|
ich6_sata_ahci = 7,
|
|
ich6m_sata_ahci = 8,
|
|
ich8_sata_ahci = 9,
|
|
piix_pata_mwdma = 10, /* PIIX3 MWDMA only */
|
|
|
|
/* constants for mapping table */
|
|
P0 = 0, /* port 0 */
|
|
P1 = 1, /* port 1 */
|
|
P2 = 2, /* port 2 */
|
|
P3 = 3, /* port 3 */
|
|
IDE = -1, /* IDE */
|
|
NA = -2, /* not avaliable */
|
|
RV = -3, /* reserved */
|
|
|
|
PIIX_AHCI_DEVICE = 6,
|
|
};
|
|
|
|
struct piix_map_db {
|
|
const u32 mask;
|
|
const u16 port_enable;
|
|
const int map[][4];
|
|
};
|
|
|
|
struct piix_host_priv {
|
|
const int *map;
|
|
};
|
|
|
|
static int piix_init_one (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent);
|
|
static void piix_pata_error_handler(struct ata_port *ap);
|
|
static void piix_sata_error_handler(struct ata_port *ap);
|
|
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
|
|
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
|
|
static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
|
|
static int ich_pata_cable_detect(struct ata_port *ap);
|
|
|
|
static unsigned int in_module_init = 1;
|
|
|
|
static const struct pci_device_id piix_pci_tbl[] = {
|
|
/* Intel PIIX3 for the 430HX etc */
|
|
{ 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
|
|
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
|
|
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
|
|
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
|
|
/* Intel PIIX4 */
|
|
{ 0x8086, 0x7199, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
|
|
/* Intel PIIX4 */
|
|
{ 0x8086, 0x7601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
|
|
/* Intel PIIX */
|
|
{ 0x8086, 0x84CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
|
|
/* Intel ICH (i810, i815, i840) UDMA 66*/
|
|
{ 0x8086, 0x2411, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_66 },
|
|
/* Intel ICH0 : UDMA 33*/
|
|
{ 0x8086, 0x2421, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_33 },
|
|
/* Intel ICH2M */
|
|
{ 0x8086, 0x244A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* Intel ICH2 (i810E2, i845, 850, 860) UDMA 100 */
|
|
{ 0x8086, 0x244B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* Intel ICH3M */
|
|
{ 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* Intel ICH3 (E7500/1) UDMA 100 */
|
|
{ 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */
|
|
{ 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
{ 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* Intel ICH5 */
|
|
{ 0x8086, 0x24DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
|
|
/* C-ICH (i810E2) */
|
|
{ 0x8086, 0x245B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* ESB (855GME/875P + 6300ESB) UDMA 100 */
|
|
{ 0x8086, 0x25A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* ICH6 (and 6) (i915) UDMA 100 */
|
|
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
/* ICH7/7-R (i945, i975) UDMA 100*/
|
|
{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
|
|
{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
|
|
|
/* NOTE: The following PCI ids must be kept in sync with the
|
|
* list in drivers/pci/quirks.c.
|
|
*/
|
|
|
|
/* 82801EB (ICH5) */
|
|
{ 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
/* 82801EB (ICH5) */
|
|
{ 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
/* 6300ESB (ICH5 variant with broken PCS present bits) */
|
|
{ 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
/* 6300ESB pretending RAID */
|
|
{ 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
|
|
/* 82801FB/FW (ICH6/ICH6W) */
|
|
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
|
|
/* 82801FR/FRW (ICH6R/ICH6RW) */
|
|
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
|
/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
|
|
{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
|
|
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
|
|
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
|
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
|
|
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
|
|
/* Enterprise Southbridge 2 (631xESB/632xESB) */
|
|
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
|
|
/* SATA Controller 1 IDE (ICH8) */
|
|
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller 2 IDE (ICH8) */
|
|
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* Mobile SATA Controller IDE (ICH8M) */
|
|
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller IDE (ICH9) */
|
|
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller IDE (ICH9) */
|
|
{ 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller IDE (ICH9) */
|
|
{ 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller IDE (ICH9M) */
|
|
{ 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller IDE (ICH9M) */
|
|
{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
/* SATA Controller IDE (ICH9M) */
|
|
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver piix_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = piix_pci_tbl,
|
|
.probe = piix_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static struct scsi_host_template piix_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
#ifdef CONFIG_PM
|
|
.resume = ata_scsi_device_resume,
|
|
.suspend = ata_scsi_device_suspend,
|
|
#endif
|
|
};
|
|
|
|
static const struct ata_port_operations piix_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = piix_set_piomode,
|
|
.set_dmamode = piix_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = piix_pata_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static const struct ata_port_operations ich_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = piix_set_piomode,
|
|
.set_dmamode = ich_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = piix_pata_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ich_pata_cable_detect,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static const struct ata_port_operations piix_sata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = piix_sata_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static const struct piix_map_db ich5_map_db = {
|
|
.mask = 0x7,
|
|
.port_enable = 0x3,
|
|
.map = {
|
|
/* PM PS SM SS MAP */
|
|
{ P0, NA, P1, NA }, /* 000b */
|
|
{ P1, NA, P0, NA }, /* 001b */
|
|
{ RV, RV, RV, RV },
|
|
{ RV, RV, RV, RV },
|
|
{ P0, P1, IDE, IDE }, /* 100b */
|
|
{ P1, P0, IDE, IDE }, /* 101b */
|
|
{ IDE, IDE, P0, P1 }, /* 110b */
|
|
{ IDE, IDE, P1, P0 }, /* 111b */
|
|
},
|
|
};
|
|
|
|
static const struct piix_map_db ich6_map_db = {
|
|
.mask = 0x3,
|
|
.port_enable = 0xf,
|
|
.map = {
|
|
/* PM PS SM SS MAP */
|
|
{ P0, P2, P1, P3 }, /* 00b */
|
|
{ IDE, IDE, P1, P3 }, /* 01b */
|
|
{ P0, P2, IDE, IDE }, /* 10b */
|
|
{ RV, RV, RV, RV },
|
|
},
|
|
};
|
|
|
|
static const struct piix_map_db ich6m_map_db = {
|
|
.mask = 0x3,
|
|
.port_enable = 0x5,
|
|
|
|
/* Map 01b isn't specified in the doc but some notebooks use
|
|
* it anyway. MAP 01b have been spotted on both ICH6M and
|
|
* ICH7M.
|
|
*/
|
|
.map = {
|
|
/* PM PS SM SS MAP */
|
|
{ P0, P2, RV, RV }, /* 00b */
|
|
{ IDE, IDE, P1, P3 }, /* 01b */
|
|
{ P0, P2, IDE, IDE }, /* 10b */
|
|
{ RV, RV, RV, RV },
|
|
},
|
|
};
|
|
|
|
static const struct piix_map_db ich8_map_db = {
|
|
.mask = 0x3,
|
|
.port_enable = 0x3,
|
|
.map = {
|
|
/* PM PS SM SS MAP */
|
|
{ P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
|
|
{ RV, RV, RV, RV },
|
|
{ IDE, IDE, NA, NA }, /* 10b (IDE mode) */
|
|
{ RV, RV, RV, RV },
|
|
},
|
|
};
|
|
|
|
static const struct piix_map_db *piix_map_db_table[] = {
|
|
[ich5_sata] = &ich5_map_db,
|
|
[ich6_sata] = &ich6_map_db,
|
|
[ich6_sata_ahci] = &ich6_map_db,
|
|
[ich6m_sata_ahci] = &ich6m_map_db,
|
|
[ich8_sata_ahci] = &ich8_map_db,
|
|
};
|
|
|
|
static struct ata_port_info piix_port_info[] = {
|
|
/* piix_pata_33: 0: PIIX4 at 33MHz */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_PATA_FLAGS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
|
|
.udma_mask = ATA_UDMA_MASK_40C,
|
|
.port_ops = &piix_pata_ops,
|
|
},
|
|
|
|
/* ich_pata_33: 1 ICH0 - ICH at 33Mhz*/
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_PATA_FLAGS,
|
|
.pio_mask = 0x1f, /* pio 0-4 */
|
|
.mwdma_mask = 0x06, /* Check: maybe 0x07 */
|
|
.udma_mask = ATA_UDMA2, /* UDMA33 */
|
|
.port_ops = &ich_pata_ops,
|
|
},
|
|
/* ich_pata_66: 2 ICH controllers up to 66MHz */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_PATA_FLAGS,
|
|
.pio_mask = 0x1f, /* pio 0-4 */
|
|
.mwdma_mask = 0x06, /* MWDMA0 is broken on chip */
|
|
.udma_mask = ATA_UDMA4,
|
|
.port_ops = &ich_pata_ops,
|
|
},
|
|
|
|
/* ich_pata_100: 3 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x06, /* mwdma1-2 */
|
|
.udma_mask = ATA_UDMA5, /* udma0-5 */
|
|
.port_ops = &ich_pata_ops,
|
|
},
|
|
|
|
/* ich_pata_133: 4 ICH with full UDMA6 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
|
|
.pio_mask = 0x1f, /* pio 0-4 */
|
|
.mwdma_mask = 0x06, /* Check: maybe 0x07 */
|
|
.udma_mask = ATA_UDMA6, /* UDMA133 */
|
|
.port_ops = &ich_pata_ops,
|
|
},
|
|
|
|
/* ich5_sata: 5 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_SATA_FLAGS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* ich6_sata: 6 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* ich6_sata_ahci: 7 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
|
|
PIIX_FLAG_AHCI,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* ich6m_sata_ahci: 8 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
|
|
PIIX_FLAG_AHCI,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* ich8_sata_ahci: 9 */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
|
|
PIIX_FLAG_AHCI,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &piix_sata_ops,
|
|
},
|
|
|
|
/* piix_pata_mwdma: 10: PIIX3 MWDMA only */
|
|
{
|
|
.sht = &piix_sht,
|
|
.flags = PIIX_PATA_FLAGS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
|
|
.port_ops = &piix_pata_ops,
|
|
},
|
|
};
|
|
|
|
static struct pci_bits piix_enable_bits[] = {
|
|
{ 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
|
|
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
|
|
};
|
|
|
|
MODULE_AUTHOR("Andre Hedrick, Alan Cox, Andrzej Krzysztofowicz, Jeff Garzik");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Intel PIIX/ICH ATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
struct ich_laptop {
|
|
u16 device;
|
|
u16 subvendor;
|
|
u16 subdevice;
|
|
};
|
|
|
|
/*
|
|
* List of laptops that use short cables rather than 80 wire
|
|
*/
|
|
|
|
static const struct ich_laptop ich_laptop[] = {
|
|
/* devid, subvendor, subdev */
|
|
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
|
|
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
|
|
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
|
|
/* end marker */
|
|
{ 0, }
|
|
};
|
|
|
|
/**
|
|
* ich_pata_cable_detect - Probe host controller cable detect info
|
|
* @ap: Port for which cable detect info is desired
|
|
*
|
|
* Read 80c cable indicator from ATA PCI device's PCI config
|
|
* register. This register is normally set by firmware (BIOS).
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static int ich_pata_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
const struct ich_laptop *lap = &ich_laptop[0];
|
|
u8 tmp, mask;
|
|
|
|
/* Check for specials - Acer Aspire 5602WLMi */
|
|
while (lap->device) {
|
|
if (lap->device == pdev->device &&
|
|
lap->subvendor == pdev->subsystem_vendor &&
|
|
lap->subdevice == pdev->subsystem_device) {
|
|
return ATA_CBL_PATA40_SHORT;
|
|
}
|
|
lap++;
|
|
}
|
|
|
|
/* check BIOS cable detect results */
|
|
mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
|
|
pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
|
|
if ((tmp & mask) == 0)
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
/**
|
|
* piix_pata_prereset - prereset for PATA host controller
|
|
* @ap: Target port
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
static int piix_pata_prereset(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
|
|
return -ENOENT;
|
|
return ata_std_prereset(ap);
|
|
}
|
|
|
|
static void piix_pata_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
|
|
static void piix_sata_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* piix_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set PIO mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
unsigned int is_slave = (adev->devno != 0);
|
|
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
|
|
unsigned int slave_port = 0x44;
|
|
u16 master_data;
|
|
u8 slave_data;
|
|
u8 udma_enable;
|
|
int control = 0;
|
|
|
|
/*
|
|
* See Intel Document 298600-004 for the timing programing rules
|
|
* for ICH controllers.
|
|
*/
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
if (pio >= 2)
|
|
control |= 1; /* TIME1 enable */
|
|
if (ata_pio_need_iordy(adev))
|
|
control |= 2; /* IE enable */
|
|
|
|
/* Intel specifies that the PPE functionality is for disk only */
|
|
if (adev->class == ATA_DEV_ATA)
|
|
control |= 4; /* PPE enable */
|
|
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
if (is_slave) {
|
|
/* Enable SITRE (seperate slave timing register) */
|
|
master_data |= 0x4000;
|
|
/* enable PPE1, IE1 and TIME1 as needed */
|
|
master_data |= (control << 4);
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
|
slave_data &= (ap->port_no ? 0x0f : 0xf0);
|
|
/* Load the timing nibble for this slave */
|
|
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
|
|
} else {
|
|
/* Master keeps the bits in a different format */
|
|
master_data &= 0xccf8;
|
|
/* Enable PPE, IE and TIME as appropriate */
|
|
master_data |= control;
|
|
master_data |=
|
|
(timings[pio][0] << 12) |
|
|
(timings[pio][1] << 8);
|
|
}
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
if (is_slave)
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
|
|
|
/* Ensure the UDMA bit is off - it will be turned back on if
|
|
UDMA is selected */
|
|
|
|
if (ap->udma_mask) {
|
|
pci_read_config_byte(dev, 0x48, &udma_enable);
|
|
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
|
|
pci_write_config_byte(dev, 0x48, udma_enable);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* do_pata_set_dmamode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: Drive in question
|
|
* @udma: udma mode, 0 - 6
|
|
* @isich: set if the chip is an ICH device
|
|
*
|
|
* Set UDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, int isich)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
u8 master_port = ap->port_no ? 0x42 : 0x40;
|
|
u16 master_data;
|
|
u8 speed = adev->dma_mode;
|
|
int devid = adev->devno + 2 * ap->port_no;
|
|
u8 udma_enable = 0;
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 0 },
|
|
{ 2, 1 },
|
|
{ 2, 3 }, };
|
|
|
|
pci_read_config_word(dev, master_port, &master_data);
|
|
if (ap->udma_mask)
|
|
pci_read_config_byte(dev, 0x48, &udma_enable);
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
|
unsigned int udma = adev->dma_mode - XFER_UDMA_0;
|
|
u16 udma_timing;
|
|
u16 ideconf;
|
|
int u_clock, u_speed;
|
|
|
|
/*
|
|
* UDMA is handled by a combination of clock switching and
|
|
* selection of dividers
|
|
*
|
|
* Handy rule: Odd modes are UDMATIMx 01, even are 02
|
|
* except UDMA0 which is 00
|
|
*/
|
|
u_speed = min(2 - (udma & 1), udma);
|
|
if (udma == 5)
|
|
u_clock = 0x1000; /* 100Mhz */
|
|
else if (udma > 2)
|
|
u_clock = 1; /* 66Mhz */
|
|
else
|
|
u_clock = 0; /* 33Mhz */
|
|
|
|
udma_enable |= (1 << devid);
|
|
|
|
/* Load the CT/RP selection */
|
|
pci_read_config_word(dev, 0x4A, &udma_timing);
|
|
udma_timing &= ~(3 << (4 * devid));
|
|
udma_timing |= u_speed << (4 * devid);
|
|
pci_write_config_word(dev, 0x4A, udma_timing);
|
|
|
|
if (isich) {
|
|
/* Select a 33/66/100Mhz clock */
|
|
pci_read_config_word(dev, 0x54, &ideconf);
|
|
ideconf &= ~(0x1001 << devid);
|
|
ideconf |= u_clock << devid;
|
|
/* For ICH or later we should set bit 10 for better
|
|
performance (WR_PingPong_En) */
|
|
pci_write_config_word(dev, 0x54, ideconf);
|
|
}
|
|
} else {
|
|
/*
|
|
* MWDMA is driven by the PIO timings. We must also enable
|
|
* IORDY unconditionally along with TIME1. PPE has already
|
|
* been set when the PIO timing was set.
|
|
*/
|
|
unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
|
|
unsigned int control;
|
|
u8 slave_data;
|
|
const unsigned int needed_pio[3] = {
|
|
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
|
|
};
|
|
int pio = needed_pio[mwdma] - XFER_PIO_0;
|
|
|
|
control = 3; /* IORDY|TIME1 */
|
|
|
|
/* If the drive MWDMA is faster than it can do PIO then
|
|
we must force PIO into PIO0 */
|
|
|
|
if (adev->pio_mode < needed_pio[mwdma])
|
|
/* Enable DMA timing only */
|
|
control |= 8; /* PIO cycles in PIO0 */
|
|
|
|
if (adev->devno) { /* Slave */
|
|
master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
|
|
master_data |= control << 4;
|
|
pci_read_config_byte(dev, 0x44, &slave_data);
|
|
slave_data &= (0x0F + 0xE1 * ap->port_no);
|
|
/* Load the matching timing */
|
|
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
|
|
pci_write_config_byte(dev, 0x44, slave_data);
|
|
} else { /* Master */
|
|
master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
|
|
and master timing bits */
|
|
master_data |= control;
|
|
master_data |=
|
|
(timings[pio][0] << 12) |
|
|
(timings[pio][1] << 8);
|
|
}
|
|
udma_enable &= ~(1 << devid);
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
}
|
|
/* Don't scribble on 0x48 if the controller does not support UDMA */
|
|
if (ap->udma_mask)
|
|
pci_write_config_byte(dev, 0x48, udma_enable);
|
|
}
|
|
|
|
/**
|
|
* piix_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set MW/UDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
do_pata_set_dmamode(ap, adev, 0);
|
|
}
|
|
|
|
/**
|
|
* ich_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set MW/UDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
do_pata_set_dmamode(ap, adev, 1);
|
|
}
|
|
|
|
#define AHCI_PCI_BAR 5
|
|
#define AHCI_GLOBAL_CTL 0x04
|
|
#define AHCI_ENABLE (1 << 31)
|
|
static int piix_disable_ahci(struct pci_dev *pdev)
|
|
{
|
|
void __iomem *mmio;
|
|
u32 tmp;
|
|
int rc = 0;
|
|
|
|
/* BUG: pci_enable_device has not yet been called. This
|
|
* works because this device is usually set up by BIOS.
|
|
*/
|
|
|
|
if (!pci_resource_start(pdev, AHCI_PCI_BAR) ||
|
|
!pci_resource_len(pdev, AHCI_PCI_BAR))
|
|
return 0;
|
|
|
|
mmio = pci_iomap(pdev, AHCI_PCI_BAR, 64);
|
|
if (!mmio)
|
|
return -ENOMEM;
|
|
|
|
tmp = readl(mmio + AHCI_GLOBAL_CTL);
|
|
if (tmp & AHCI_ENABLE) {
|
|
tmp &= ~AHCI_ENABLE;
|
|
writel(tmp, mmio + AHCI_GLOBAL_CTL);
|
|
|
|
tmp = readl(mmio + AHCI_GLOBAL_CTL);
|
|
if (tmp & AHCI_ENABLE)
|
|
rc = -EIO;
|
|
}
|
|
|
|
pci_iounmap(pdev, mmio);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* piix_check_450nx_errata - Check for problem 450NX setup
|
|
* @ata_dev: the PCI device to check
|
|
*
|
|
* Check for the present of 450NX errata #19 and errata #25. If
|
|
* they are found return an error code so we can turn off DMA
|
|
*/
|
|
|
|
static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
|
|
{
|
|
struct pci_dev *pdev = NULL;
|
|
u16 cfg;
|
|
u8 rev;
|
|
int no_piix_dma = 0;
|
|
|
|
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
|
|
{
|
|
/* Look for 450NX PXB. Check for problem configurations
|
|
A PCI quirk checks bit 6 already */
|
|
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
|
|
pci_read_config_word(pdev, 0x41, &cfg);
|
|
/* Only on the original revision: IDE DMA can hang */
|
|
if (rev == 0x00)
|
|
no_piix_dma = 1;
|
|
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
|
|
else if (cfg & (1<<14) && rev < 5)
|
|
no_piix_dma = 2;
|
|
}
|
|
if (no_piix_dma)
|
|
dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
|
|
if (no_piix_dma == 2)
|
|
dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
|
|
return no_piix_dma;
|
|
}
|
|
|
|
static void __devinit piix_init_pcs(struct pci_dev *pdev,
|
|
struct ata_port_info *pinfo,
|
|
const struct piix_map_db *map_db)
|
|
{
|
|
u16 pcs, new_pcs;
|
|
|
|
pci_read_config_word(pdev, ICH5_PCS, &pcs);
|
|
|
|
new_pcs = pcs | map_db->port_enable;
|
|
|
|
if (new_pcs != pcs) {
|
|
DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs);
|
|
pci_write_config_word(pdev, ICH5_PCS, new_pcs);
|
|
msleep(150);
|
|
}
|
|
}
|
|
|
|
static void __devinit piix_init_sata_map(struct pci_dev *pdev,
|
|
struct ata_port_info *pinfo,
|
|
const struct piix_map_db *map_db)
|
|
{
|
|
struct piix_host_priv *hpriv = pinfo[0].private_data;
|
|
const unsigned int *map;
|
|
int i, invalid_map = 0;
|
|
u8 map_value;
|
|
|
|
pci_read_config_byte(pdev, ICH5_PMR, &map_value);
|
|
|
|
map = map_db->map[map_value & map_db->mask];
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev, "MAP [");
|
|
for (i = 0; i < 4; i++) {
|
|
switch (map[i]) {
|
|
case RV:
|
|
invalid_map = 1;
|
|
printk(" XX");
|
|
break;
|
|
|
|
case NA:
|
|
printk(" --");
|
|
break;
|
|
|
|
case IDE:
|
|
WARN_ON((i & 1) || map[i + 1] != IDE);
|
|
pinfo[i / 2] = piix_port_info[ich_pata_100];
|
|
pinfo[i / 2].private_data = hpriv;
|
|
i++;
|
|
printk(" IDE IDE");
|
|
break;
|
|
|
|
default:
|
|
printk(" P%d", map[i]);
|
|
if (i & 1)
|
|
pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
|
|
break;
|
|
}
|
|
}
|
|
printk(" ]\n");
|
|
|
|
if (invalid_map)
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"invalid MAP value %u\n", map_value);
|
|
|
|
hpriv->map = map;
|
|
}
|
|
|
|
/**
|
|
* piix_init_one - Register PIIX ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in piix_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer. We probe for combined mode (sigh),
|
|
* and then hand over control to libata, for it to do the rest.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct device *dev = &pdev->dev;
|
|
struct ata_port_info port_info[2];
|
|
struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] };
|
|
struct piix_host_priv *hpriv;
|
|
unsigned long port_flags;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"version " DRV_VERSION "\n");
|
|
|
|
/* no hotplugging support (FIXME) */
|
|
if (!in_module_init)
|
|
return -ENODEV;
|
|
|
|
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
|
|
port_info[0] = piix_port_info[ent->driver_data];
|
|
port_info[1] = piix_port_info[ent->driver_data];
|
|
port_info[0].private_data = hpriv;
|
|
port_info[1].private_data = hpriv;
|
|
|
|
port_flags = port_info[0].flags;
|
|
|
|
if (port_flags & PIIX_FLAG_AHCI) {
|
|
u8 tmp;
|
|
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
|
|
if (tmp == PIIX_AHCI_DEVICE) {
|
|
int rc = piix_disable_ahci(pdev);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/* Initialize SATA map */
|
|
if (port_flags & ATA_FLAG_SATA) {
|
|
piix_init_sata_map(pdev, port_info,
|
|
piix_map_db_table[ent->driver_data]);
|
|
piix_init_pcs(pdev, port_info,
|
|
piix_map_db_table[ent->driver_data]);
|
|
}
|
|
|
|
/* On ICH5, some BIOSen disable the interrupt using the
|
|
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
|
|
* On ICH6, this bit has the same effect, but only when
|
|
* MSI is disabled (and it is disabled, as we don't use
|
|
* message-signalled interrupts currently).
|
|
*/
|
|
if (port_flags & PIIX_FLAG_CHECKINTR)
|
|
pci_intx(pdev, 1);
|
|
|
|
if (piix_check_450nx_errata(pdev)) {
|
|
/* This writes into the master table but it does not
|
|
really matter for this errata as we will apply it to
|
|
all the PIIX devices on the board */
|
|
port_info[0].mwdma_mask = 0;
|
|
port_info[0].udma_mask = 0;
|
|
port_info[1].mwdma_mask = 0;
|
|
port_info[1].udma_mask = 0;
|
|
}
|
|
return ata_pci_init_one(pdev, ppinfo, 2);
|
|
}
|
|
|
|
static int __init piix_init(void)
|
|
{
|
|
int rc;
|
|
|
|
DPRINTK("pci_register_driver\n");
|
|
rc = pci_register_driver(&piix_pci_driver);
|
|
if (rc)
|
|
return rc;
|
|
|
|
in_module_init = 0;
|
|
|
|
DPRINTK("done\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit piix_exit(void)
|
|
{
|
|
pci_unregister_driver(&piix_pci_driver);
|
|
}
|
|
|
|
module_init(piix_init);
|
|
module_exit(piix_exit);
|