4664179fe6
The SNVS power key depends on board design, by default it should be disabled in SoC DT and ONLY be enabled on board DT if it is wired up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
776 lines
18 KiB
Plaintext
776 lines
18 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR MIT
|
|
//
|
|
// Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx7d.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX7 SabreSD Board";
|
|
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x80000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
wakeup-source;
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
spi4 {
|
|
compatible = "spi-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi4>;
|
|
gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
|
gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
num-chipselects = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
extended_io: gpio-expander@0 {
|
|
compatible = "fairchild,74hc595";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0>;
|
|
registers-number = <1>;
|
|
spi-max-frequency = <100000>;
|
|
};
|
|
};
|
|
|
|
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg2_vbus";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_vref_1v8: regulator-vref-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vref-1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
reg_brcm: regulator-brcm {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-name = "brcm_reg";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_brcm_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <200000>;
|
|
};
|
|
|
|
reg_lcd_3v3: regulator-lcd-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "lcd-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reg_can2_3v3: regulator-can2-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "can2-3v3";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reg_fec2_3v3: regulator-fec2-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fec2-3v3";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet2_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000 0>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
status = "okay";
|
|
};
|
|
|
|
panel {
|
|
compatible = "innolux,at043tn24";
|
|
backlight = <&backlight>;
|
|
power-supply = <®_lcd_3v3>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&display_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_vref_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&adc2 {
|
|
vref-supply = <®_vref_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&sw1a_reg>;
|
|
};
|
|
|
|
&ecspi3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi3>;
|
|
cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
tsc2046@0 {
|
|
compatible = "ti,tsc2046";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
pinctrl-names ="default";
|
|
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <29 0>;
|
|
pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
|
ti,x-min = /bits/ 16 <0>;
|
|
ti,x-max = /bits/ 16 <0>;
|
|
ti,y-min = /bits/ 16 <0>;
|
|
ti,y-max = /bits/ 16 <0>;
|
|
ti,pressure-max = /bits/ 16 <0>;
|
|
ti,x-plate-ohms = /bits/ 16 <400>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
|
|
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
|
assigned-clock-rates = <0>, <100000000>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <ðphy0>;
|
|
fsl,magic-packet;
|
|
phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
ethphy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet2>;
|
|
assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
|
|
<&clks IMX7D_ENET2_TIME_ROOT_CLK>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
|
|
assigned-clock-rates = <0>, <100000000>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <ðphy1>;
|
|
phy-supply = <®_fec2_3v3>;
|
|
fsl,magic-packet;
|
|
status = "okay";
|
|
};
|
|
|
|
&flexcan2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
xceiver-supply = <®_can2_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze3000@8 {
|
|
compatible = "fsl,pfuze3000";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1a {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
/* use sw1c_reg to align with pfuze100/pfuze200 */
|
|
sw1c_reg: sw1b {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vldo2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vccsd {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: v33 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vldo4 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
mpl3115@60 {
|
|
compatible = "fsl,mpl3115";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
status = "okay";
|
|
|
|
codec: wm8960@1a {
|
|
compatible = "wlf,wm8960";
|
|
reg = <0x1a>;
|
|
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
|
|
clock-names = "mclk";
|
|
wlf,shared-lrclk;
|
|
};
|
|
};
|
|
|
|
&lcdif {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcdif>;
|
|
status = "okay";
|
|
|
|
port {
|
|
display_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
®_1p0d {
|
|
vin-supply = <&sw2_reg>;
|
|
};
|
|
|
|
®_1p2 {
|
|
vin-supply = <&sw2_reg>;
|
|
};
|
|
|
|
&snvs_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart6 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart6>;
|
|
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
|
|
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usb_otg1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usb_otg2_vbus>;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
wakeup-source;
|
|
keep-power-in-suspend;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
wakeup-source;
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
vmmc-supply = <®_brcm>;
|
|
fsl,tuning-step = <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
|
|
assigned-clock-rates = <400000000>;
|
|
bus-width = <8>;
|
|
fsl,tuning-step = <2>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx7d-sdb {
|
|
pinctrl_brcm_reg: brcmreggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi3: ecspi3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
|
|
MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2
|
|
MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2
|
|
MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
|
|
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
|
|
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
|
|
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
|
|
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
|
|
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
|
|
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
|
|
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet2: enet2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
|
|
MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
|
|
MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
|
|
MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
|
|
MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
|
|
MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
|
|
MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
|
|
MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
|
|
MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
|
|
MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
|
|
MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
|
|
MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet2_reg: enet2reggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: flexcan2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
|
|
MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2_reg: flexcan2reggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpio_keysgrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59
|
|
MX7D_PAD_SD2_WP__GPIO5_IO10 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
|
|
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
|
|
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
|
|
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: i2c4grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
|
|
MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcdif: lcdifgrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
|
|
MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
|
|
MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
|
|
MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
|
|
MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
|
|
MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
|
|
MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
|
|
MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
|
|
MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
|
|
MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
|
|
MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
|
|
MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
|
|
MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
|
|
MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
|
|
MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
|
|
MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
|
|
MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
|
|
MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
|
|
MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
|
|
MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
|
|
MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
|
|
MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
|
|
MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
|
|
MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
|
|
MX7D_PAD_LCD_CLK__LCD_CLK 0x79
|
|
MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
|
|
MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
|
|
MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
|
|
MX7D_PAD_LCD_RESET__LCD_RESET 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_spi4: spi4grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
|
|
MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
|
|
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_tsc2046_pendown: tsc2046_pendown {
|
|
fsl,pins = <
|
|
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
|
|
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
|
|
MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
|
|
MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
|
|
MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart6: uart6grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
|
|
MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
|
|
MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
|
|
MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
|
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
|
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
|
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
|
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
|
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
|
|
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
|
|
MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
|
|
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x19
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
|
|
>;
|
|
};
|
|
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc_lpsr {
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: pwm1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
|
|
>;
|
|
};
|
|
};
|