6ddf6c91e6
For the ti-cpufreq driver we need a clear separation between omap34 and omap36 families
since they have different silicon revisions and efuses.
So far ti,omap3630/ti,omap36xx is just an additional flag to ti,omap3 while omap34 has no
required entry.
Therefore we can not match omap34 boards properly.
This needs to add ti,omap3430 and ti,omap3630 where it is missing.
We also clean up some instances of missing ti,am3517 so that we can rely on
seeing either one of:
ti,am3517
ti,omap3430
ti,omap3630
in addition to ti,omap3.
We leave ti,omap34xx and ti,omap36xx untouched for compatibility.
The script to do the conversion is:
manually fix am3517_mt_ventoux.dts
find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap34xx"/"ti,omap3430", "ti,omap34xx"/' {} \;
find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; -exec sed -i '' 's/"ti,omap36xx"/"ti,omap3630", "ti,omap36xx"/' {} \;
find arch/arm/boot/dts \( -name 'omap*.dts*' -o -name 'logic*.dts*' \) -exec fgrep -q '"ti,omap3"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; ! -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,am3517"' {} \; ! -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap3"/"ti,omap3430", "ti,omap3"/' {} \;
So if your out-of-tree omap3 board does not show any OPPs, please check
the compatibility entry and update if needed.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
306 lines
7.4 KiB
Plaintext
306 lines
7.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "omap34xx.dtsi"
|
|
#include "omap-gpmc-smsc911x.dtsi"
|
|
|
|
/ {
|
|
model = "TI OMAP3430 LDP (Zoom1 Labrador)";
|
|
compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x8000000>; /* 128 MB */
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vcc>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_key_pins>;
|
|
|
|
key_enter {
|
|
label = "enter";
|
|
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
|
|
linux,code = <KEY_ENTER>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f1 {
|
|
label = "f1";
|
|
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
|
|
linux,code = <KEY_F1>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f2 {
|
|
label = "f2";
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
|
|
linux,code = <KEY_F2>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f3 {
|
|
label = "f3";
|
|
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
|
|
linux,code = <KEY_F3>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f4 {
|
|
label = "f4";
|
|
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
|
|
linux,code = <KEY_F4>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_left {
|
|
label = "left";
|
|
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
|
|
linux,code = <KEY_LEFT>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_right {
|
|
label = "right";
|
|
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
|
|
linux,code = <KEY_RIGHT>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_up {
|
|
label = "up";
|
|
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
|
|
linux,code = <KEY_UP>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_down {
|
|
label = "down";
|
|
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
|
|
linux,code = <KEY_DOWN>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
|
|
<1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
linux,mtd-name= "micron,nand";
|
|
nand-bus-width = <16>;
|
|
gpmc,device-width = <2>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "X-Loader";
|
|
reg = <0 0x80000>;
|
|
};
|
|
partition@80000 {
|
|
label = "U-Boot";
|
|
reg = <0x80000 0x140000>;
|
|
};
|
|
partition@1c0000 {
|
|
label = "Environment";
|
|
reg = <0x1c0000 0x40000>;
|
|
};
|
|
partition@200000 {
|
|
label = "Kernel";
|
|
reg = <0x200000 0x1e00000>;
|
|
};
|
|
partition@2000000 {
|
|
label = "Filesystem";
|
|
reg = <0x2000000 0x6000000>;
|
|
};
|
|
};
|
|
|
|
ethernet@gpmc {
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <1 0 0xff>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <2600000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
interrupt-parent = <&intc>;
|
|
|
|
twl_power: power {
|
|
compatible = "ti,twl4030-power-idle";
|
|
ti,use_poweroff;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "twl4030.dtsi"
|
|
#include "twl4030_omap3.dtsi"
|
|
#include "omap3-panel-sharp-ls037v7dw01.dtsi"
|
|
|
|
&backlight0 {
|
|
gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
/* tps61130rsa enabled by twl4030 regen */
|
|
&lcd_3v3 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
&lcd0 {
|
|
enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */
|
|
reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */
|
|
mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */
|
|
};
|
|
|
|
&mcspi1 {
|
|
tsc2046@0 {
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <22 0>; /* gpio54 */
|
|
pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
/* See 35xx errata 2.1.1.128 in SPRZ278F */
|
|
compatible = "ti,omap3-pre-es3-hsmmc";
|
|
vmmc-supply = <&vmmc1>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
};
|
|
|
|
&mmc2 {
|
|
status="disabled";
|
|
};
|
|
|
|
&mmc3 {
|
|
status="disabled";
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
gpio_key_pins: pinmux_gpio_key_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
|
|
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
|
|
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
|
|
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
|
|
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
|
|
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
|
|
OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
|
|
OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
|
|
OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
|
|
>;
|
|
};
|
|
|
|
musb_pins: pinmux_musb_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
|
|
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
|
|
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
|
|
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
|
|
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
|
|
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
|
|
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
|
|
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
|
|
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
|
|
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
|
|
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
|
|
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
|
|
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
|
|
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&twl_keypad {
|
|
linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
|
|
MATRIX_KEY(0, 1, KEY_2)
|
|
MATRIX_KEY(0, 2, KEY_3)
|
|
MATRIX_KEY(1, 0, KEY_4)
|
|
MATRIX_KEY(1, 1, KEY_5)
|
|
MATRIX_KEY(1, 2, KEY_6)
|
|
MATRIX_KEY(1, 3, KEY_F5)
|
|
MATRIX_KEY(2, 0, KEY_7)
|
|
MATRIX_KEY(2, 1, KEY_8)
|
|
MATRIX_KEY(2, 2, KEY_9)
|
|
MATRIX_KEY(2, 3, KEY_F6)
|
|
MATRIX_KEY(3, 0, KEY_F7)
|
|
MATRIX_KEY(3, 1, KEY_0)
|
|
MATRIX_KEY(3, 2, KEY_F8)
|
|
MATRIX_KEY(5, 4, KEY_RESERVED)
|
|
MATRIX_KEY(4, 4, KEY_VOLUMEUP)
|
|
MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
|
|
};
|
|
|
|
&uart3 {
|
|
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&musb_pins>;
|
|
interface-type = <0>;
|
|
usb-phy = <&usb2_phy>;
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&vaux1 {
|
|
/* Needed for ads7846 */
|
|
regulator-name = "vcc";
|
|
};
|